MSI 865PE neo-2p, d bracket, code not in book

well suddenly my MSI 865PE neo-2p is not working, no beeps, no screen tuning on, and the d bracket2 is all wierd
lights 1 and 2 are going red and green like a schoolbus
lights 3 and 4 are red
board is out of case (on a wooden piece of wood) and the problem still percists
i have everything but the d bracket and power wires going to the board disconected
i also tried a diff PSU, no change

What I'd do is to strip off the system completely and only put CPU, and then RAM, and then display.... one by one, and see how far the system goes.
Try this
1. board + CPU --> 3 long beeps, indicating no RAM --> your CPU is fine.
2. board + CPU + RAM -> 8 long and short beeps, indicating no display, --> your RAM is fine.
3. board + CPU + RAM + display card --> see the POST screen --> everything is OK.
4. add in HDD --> detected in the BIOS --> everything is OK.
5. add everything else --> detected in BIOS --> everything is OK. Continue boot to Winblows. See anything missing.
If you can't even get out of 1, 2, or 3. Try clear CMOS.

Similar Messages

MSI 865pe neo 2 - BOOT FAILURE PROBLEM

i have a msi 865pe neo 2 motherboard and im getting the following problem, when i turn on my pc it is coming up with boot failure message and ask me to restart my computer it goes through this a lot then all of a sudden it works fine , when this problem happens and i go into cmos settings i notice that it is not reconising my IDE hard drive PLEASE PLEASE can someone help me with this and tell me what the cause is and how to fix it.
Many Thanks
Simon Rogers

im sorry here is the spec of my machine, and the problem is listed in my original post please can someone help
Motherboard - MSI 865pe Neo 2
CPU - Intel Pentium 4 2.8 GHZ Prescott
Hard Drive - Maxtor 6E040L0
Memory - x2 512mb Crucial DDR PC3200
Graphics card - Nvidia GeForce Ti 4600
Sound card - Creative labs live 128
CyberDrv CW038D CD-R/RW
Sony DVD RW DW-G120A
PSU 400 watt

MSI 865PE Neo Series Restart Problem

Hello,
I have a problem on my MSI 865PE Neo Series Mobo when i restart my system using windows or by pressing ctrl+alt+del my pc won't restart and stay there forever on a black screen but when i press my reset button it will restart normally this is my one and only problem regarding this mobo... pls any help here. fix or any tips and suggestions...
(*by the way this is just my friends computer and im the one who builds it and maintain it...)
System Specs Of My Friend's PC:
MSI 865PE Neo Series Intel P4 Motherboard w/ HT Technology Support
Intel P4 @ 3GHz/800MHz FSB HT Technology
512MB DDR400
MSI NVIDIA GeForce FX 5700 @ 256MB DDR
550W PSU 12A-30

no guyz im using Windows XP Pro SP1 and its not a OS problem because the first time i boot the system i have no OS yet and then i press ctrl+alt+del then my system wont restart at all even in windows ive updated all drivers and mobo bios and increasing DDR Voltage to 2.8v and disabling HT has no changed at all any help would be appreciated... i think this is some problem with MSI mobo power management that it can't match ur psu so well unlike ASUS and GIGABYTE mobo runs perfectly fine. by the way its not my pc its my friend's pc and im the one who builds and hope to fix this one and only problem... everything else is ok except for the Restart Problem!!!!
My System Spec:
GIGABYTE GA-8INXP Intel E7205 Chipset P4 MB
Intel P4 @ 3GHz/500MHz FSB
1GB Dual Channel DDR266
ASUS ATI Radeon X800XT @ 256MB GDDRIII/AGP8x
Seagate 80GB SATA HDD
Maxtor 80GB IDE RAID HDD
Microsoft Windows XP Professional Edition @ Service Pack 2 RC1 (fully updated)
My Friend's Spec:
MSI 865PE Neo Series P4 MB
Intel P4 @ 3GHz/800MB FSB
512MB DDR400 CL2.5
MSI NVIDIA GeForce FX 5700 @ 256MB DDR/AGP8x
80GB IDE HDD (x2)
Microsoft Windows XP Professional Edition @ Service Pack 1 (fully updated)
*this is not a windows problem motherboard power management or bios settings bug here..
*its my first time to handle a MSI Motherboard
*and if any guyz out there need help regarding other problems or any problems in ur pc pm me in ym @ [email protected]

MSI 865PE Neo-L high temp readings?

Hello..
When my system is off for a couple of hours and then i boot up my system,and go directly into the bios,my CPU temperature is already 40-45C° !!! :O
And even my cooling block isn't hot then(not even warm).
Also in windows with the MSI software i get those high temperature readings.
Only with speedfan,the temperatures are more normal.
Is this a know issue that MSI boards have high temperature readings ?(
CPU is a P4 2.6Ghz FSB800
(system is not overclocked)
Thanks in advance! :D

ok,first of all thanks for the reply's guy's!!!
My system specs :
MSI 865PE NEO-L (duh :D )
P4c 2.6Ghz FSB800 with boxed cooler.
Maxtor 30GB 7200RPM
2x256 DDR400 ram
GF4 TI4200 64mb
Q-tec 400W dual fan.
DVD drive (lite-on 16xdvd ,52cd-rom)
CDRW drive(lite-on 52-32-52)
As said,with corecenter or other MSI software almost directly 45C° Even the heatsink is not warm then.
(stressed 58-60C°)
Speedfan gives me more then one temp..
HD0 : 23C° this should be the harddisk temp i think.
Temp1 : 29C° this should be the system temm or case temp.
Temp 2 : 42C° this should be the CPU temp.
All these readings are IDLE temps.
And i think those are the wright temps...
(ps,sorry for my bad english,if you don't understand something,please ask :D )
And Naviblue,nice overclock you got there!

MSI 865PE Neo 3-F + Intel P4 640

Hello,
I have a problem with a MSI 865PE Neo 3-F motherboard combined with an Intel 640 cpu.
I cannot install Windows XP SP2, everytime at 35 minutes remaining, the computer resets itself.
First I had bios v5.0, and couldn't flash to v5.2, after using a Intel 520 cpu I could flash to v5.2, but the problem remains.
Tried several ram-modules, hdd, vga-cards, psu's, ...
Anyone know if there is a solution for this ? Maybe a new bios-version or beta-bios ?
Thanks,
Jan

Two things you could test;
Run memtest86 for any mem.errors ( you can do this by creatings a DOS disc and boot from floppy )
http://www.memtest.org/#downiso
Not sure about the 410w chieftec - Is that a ATX2.0 PSU with 24pin connector ? ( 12v1 =15amp + 12v2=18 amps)
Do you use a 24-20 pin adapter ?
If I´m correct, your MoBo still got the 20-pin MoBo + 4-pin cpu powerconnector, and too be sure about the power issue, I would have prefered a PSU with some 450w and a singel 12v line with minimum 22 amps on the 12v line. The newer P4/ Prescott cpu´s needs a lot of 12v power.- Be sure that both 20pin and 4pin are firmly in place on the MoBo.
Most highly recommended PSU´s are Enermax, Antec, Tagan, OCZ, but there are others as well as long as you avoid the cheap ones -
PS - about mem.voltage it would be 2.7v not 1.7v as you wrote, but assume this was only a typingfault.
775 socket cpu installation
http://www.msi.com.tw/html/service/techexpress/mainboard/7028/page2.htm

Need help with buying graphics card and ram for MSI 865PE NEO 2-V

Hi,
I want to buy 1GB of ram for motherboard MSI 865PE NEO 2-V I need help with finding correct parts.
I also want to buy 512Mb or 1GB graphics card.
as i said before i need help with finding correct ones so they match motherboard, I would appreciate if any one would post link to cheap and fitting parts.
I found graphics card allready, i just need to know if it will fit.
the card is
NVIDIA GeForce 7600 GS (512 MB) AGP Graphics Card
Thanks for help.

here you can see test reports for your mobo:
http://www.msi.com/product/mb/865PE-Neo2-V.html#?div=TestReport

MSI 865PE NEO 3-V mobo

I have a MSI 865PE NEO 3-V mobo
i want to reformat my hard drive and i can't seem to restore my sata driver
after following instructions as per web site and on cd rom.....what the heck am I donig wrong?
please help! >:(

Quote
after following instructions as per web site and on cd rom
what site

How to connect dual channel ram on a msi 865pe neo-2 plat.edition ?

hi....
can any one tell me how to connect the RAM as dual channel on the MSI 865PE Neo-2 p Platinum Edition ?
i did like what is written in the manual but nothing happened it only works as a single channel....
the RAm is 2x512 spectek DDR400 PC3200....
pls help me.............

Franknputer is right.
All systems that I build for my gamers runs in Dual Channel and the combo is 1 + 3 or 2 + 4 or 1 + 2 + 3 + 4. 1 x RAM in Channel A and 1 x RAM in Channel B minimum will give your Dual Channel Linear Mode message during startup and you know that you are running Dual Channel.
Next, it is always recommended to have the same make and model and capacity of the RAMs if you want to run in Dual Channel.

MSI 865PE Neo 2 & SLK900U

Hello , i have all ready the SLK900U cooler,and i have just order the MSI 865PE Neo2 LS .
Does the SLK900 fit in this board with out nags or problems , and i am talking about the capasitors and the coils ,that is next to the CPU socket ..
Please give me some feedback on that ..
Thanks .

Thanks Man !!
I will get my red baby in two days from now, and also i like to say that you do a great job in this forums .
I have got prepared to fight all the litle possible issues of this board.
As its well known that the totaly perfect motherboard its only a dream . :D

MSI 865PE NEO FISR2 Audio not working properly

The audio on my board is not working properly. I have it set for 6 channel and am using Creative Labs Inspire 5.1 Speakers that have 3 inputs that match the 3 output jacks on the mobo. However, its just not right. It is sending anything to all 5.1 speakers and also to the proper speaker at same time. So every sound is coming through all speakers and it a tad louder on the speaker it should be coming out on. Anyone else have any clue as to what setting I can change to correct this or is this something wrong with the cmedia drivers?

The answer to all your suggestions is yes, already did it and in the demo app the sounds work fine. Its just so odd, I may just go to Circuit City tomorrow and buy another set of speakers and see if it is possibly them that are causing the issue. Then if so, I'll just return the Creative Labs ones as I just bought them 2 weeks ago and CC has great return policy
Actually, one of your questions I did not either understand what you meant or did not see the option Quote
Did you enable the output port correctly - LR to LR, surround to surround, center/lfe to center/lfe
The only thing I see is setting phones, 2, 4 or 6 channel in the cmedia control panel and then I plugged in the proper cables.

1.44B Bios for MSI 865PE NEO FISR2

Can any of you mods send this file my way? My email is [email protected] Thanks.
Also, what are the supposed fixes included with this bios?

hi Misdeismo,
I'm sorry but we do not distribute beta BIOSes, with exception though. Usually when particular user has problem and we feedback to MSI, once MSI tell us to give him/her a try on the beta BIOS, there we will send the beta BIOS to him/her. Other than that, we don't. We are a bit conservative on this. 8)
Anyway, we don't stop users using beta BIOS, provided they know the risks and voiding warranty. As you see when users claim he/she has the beta BIOS and willing to distribute, we won't block or remove the threads unless being told by MSI, but MSI never do that.
I'm quite sure some users already have hand with 1.44B BIOS. Probably you can approach them. :D

MSI 865PE neo 2 s + P4 Extreme Edition (Gallatin) 3.4 Ghz

Guys,
I am just wondering, if my MSI 865 PE neo 2 s board can run this processor:
* Intel Pentium 4 Extreme Edition processor
* 3.4 GHz clock speed
* 800 MHz Front Side Bus (FSB)
* 512KB L2 cache
* 2 MB L3 cache
* Socket 478
* Supports Hyper-threading
* Gallatin core (based on the Intel Xeon MP) !!!
From the CPU compatibility list:
http://www.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=543
Only stated supported the 3.2 Ghz Extreme Edition version.
My usual Retailer that sold me the 3.2 Ghz Northwood have just phoned me and offer this processor (maybe some rebate).
Thanks a lot guys for the response.

Check out this for more recent CPU support list:
http://www.cpu-upgrade.com/mb-MSI/865PE_Neo2_S__LS__FIS2R_%28MS-6728%29.html

MOVED: Need help with buying graphics card and ram for MSI 865PE NEO 2-V

This topic has been moved to Retired motherboards.
https://forum-en.msi.com/index.php?topic=163057.0

here you can see test reports for your mobo:
http://www.msi.com/product/mb/865PE-Neo2-V.html#?div=TestReport

865PE Neo 2 any comments?

I am thinking of buying one of the new 865PE Neo 2 MSI motherboard to run a 2.4 800mhz, has anyone had any problems or success with the board. just reading some of the treads on the 875 Neo it appears MSI had stuffed things up quite bad this time. another thing is the so called new feature of "dynamic overclocking" on the new neo 2 boards, is that a good thing or bad thing?
my planned systme at the moment is:
MSI 865PE neo-2 S
ati 9500
2.4 800mhz
seagate 120G serial ATA 8mb cache
cheers.

I am already running my system based on 865PE Neo2-LS and i am absolutely satisfied with its stability and overclockability. Only one problem i ecpected at the moment is, that my system fails to boot from external PCI
Controller based on Highpoint HPT370 chipset (built by ABIT - type: HOT Rod
100). If no Hard Drive installed on Onboard ICH5 controller, it is possible
to normaly boot from RAID 0 through PCI controller. If any Hard Drive on
Onboard ICH5 detected, booting from external RAID fails even if in BIOS is
selected "Legacy SCSI" as first boot Device. All attemts as moving RAID
controller to another PCI slot, disabling onboard Serial ATA Controller
failed. After booting from another HDD connected to ICH5 RAID 0 is visible
in Windows and working properly. I received from MSI beta bios version 121 and to be honest i am rather disapointed to use them before official release. Do you have some another expactations and comments to this board? Did anyone from you try this beta bios? Is it working properly?

865pe neo (not neo 2) prescott support

Does anyone know if the 865pe neo supports the new prescott core processors?

It's not in this list: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=prescott
but I doubt they would even test your board for compatibility.
Even the Neo2's don't work with the faster ones, so you are better off not taking the chance.

MSI 865PE neo-2p, d bracket, code not in book

Similar Messages

Maybe you are looking for