MSI 865PE Neo2 motherboard drivers...

Hi, I inherited an old MSI 865PE Neo2 mobo from a friend a while ago, and recently my Gigabyte board developed some bad caps and became too unstable. So I've installed my P4 CPU and some other older components on this MSI board, but I have no driver CD.
Windows seems to have installed most of the drivers, but I'm missing the audio drivers. HWiNFO32 reports the audio adaptor as an Intel 82801EB(M) ICH5(-M) - AC'97 Audio Controller / AC'97 Codec: C-Media CMI9739(A).
I don't see these drivers available on the MSI site for this older board. Any suggestions where I can get the appropriate drivers?
Cheers!
EDIT: No worries; I found the download - C-Media CMI9739A/9761 Software Audio Drivers. Couldn't see for looking - http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=543

Try this. It worked for me in the past.....
http://www.realtek.com.tw/Downloads/downloadsCheck.aspx?Langid=1&PNid=23&PFid=23&Level=4&Conn=3&DownTypeID=3&GetDown=false

Similar Messages

MSI 865pe neo2 problem with IDE2 slot

My MSI 865pe neo2 motherboard isn't recognizing any devices plugged into the IDE2 slot. I originally thought it may have been the cable (I used an old cable pulled from my P3), but even with a new IDE cable nothing gets recognized. Is there some trick I'm missing, or maybe is the slot broken? Would updating the BIOS do anything? Any help appreciated.
P4 2.4 800fsb
512mb ddr pc3200 (corsair valueselect ram)
msi fx5200 td128 video card

Thank you very much, that was it. I'm not very familiar with working with BIOS so I wouldn't have even known to look for that until you mentioned it, then I took a look in the bios section of the motherboard's manual, and saw it under the integrated peripherals section under On-Chip IDE Configuration. It was set on P-ATA + S-ATA, so I changed it to P-ATA Only and it worked like a charm.
One further question- if I later on buy a S-ATA hard drive, would I need to change this setting again? Would I have to give up the IDE2 slot to use an S-ATA connection?
Thanks again!
Josh

Do fan " Zalman CNPS7000A-CU" fit in a MSI " 865PE Neo2-LS" Motherboard?

Hi
I´m trying to find out if anyvony in this forum has the experience of fitting a cooling unit (Zalman CNPS7000A-CU) on a MSI 865PE Neo2-LS motherboard.
The case is a Antec Sonata 380W With 1 exhaust fan (120mm).......
Should I expect any problems.......its a big cooling unit...
Best regards
Mr Lithesteel

No, the Zalman-CNPS-7000-AlCu CPU Cooler will Fit with NO problem, and Room to Spare ....And It Will Take you More Time to Remove the "Stock" Intel HSF Unit, Then it will to Install the New Zalman 7000-AlCu ......I have this HSF on All 3 Of My Systems ..And I Happen to think that the Zalman is the Best......And yes I have tried the Thermaltake.....And still Prefer the Zalman ..But with "only" one 120mm Exaust Fan ..You should at Least Install 1 120mm or 80mm Intake Fan...............Sean REILLY875

My "MSI 865PE Neo2-PFS Platinum" Is not working

I have an MSI 865PE Neo2-PFS Platinum and it has stopped working properly, I'm fairly sure that the problem is coming from the motherboard however I would like another person opinion.
Basically everytime i try to play a game it works for about 5 seconds then comes up with a bluse screen telling me to check Windows has needed to shut down because there has been an error and that it could be caused by drivers or that I need to disable BIOS caching and shadowing
So far I have tried disableing BIOS caching and shadowing. Changing the RAM around and using different modules. I have formatted the Hard Drive. Tried using a different graphics card. Reinstalled the BIOS. Uninstalled all the drivers and tried different ones.
None of this has made any difference.

Since you already have reformated/made a fresh OS install, here´s some things you can try…….
- Set dram voltage to 2.7v in bios
- Use Driver Cleaner when uninstalling VGA drivers
http://www.majorgeeks.com/download3214.html
- Install latest IntelInf driver
http://downloadfinder.intel.com/scripts-df/Product_Filter.asp?ProductID=816
- DirectX
http://www.microsoft.com/downloads/details.aspx?FamilyId=0A9B6820-BFBB-4799-9908-D418CDEAC197&displaylang=en
- Install Nvidia VGA drivers
If that don´t help……………
- Try another VGA card
- List 3,3v+12v amps on PSU

Unable to detect Hyper Threading of CPU SL6WE 3.2 in MSI-865PE Neo2

Hi! I am new to this forum and need some help. I have just installed a Intel Pentium 4 3.2GHz Northwood SL6WE 478 800MHz/512k . I bought this on e-bay and understand that this cpu supports hyper threading. I have enabled hyper threading in the bios, but only see one cpu in Widows System Properties and only one cpu in Windows Task Manager. I had a 2.6 cpu installed previously, no hyper threading. My motherboard is an MSI-865PE Neo2 version 1.1, 2GB Ram ( 4x512 ?), Thermaltke TR2-430W power supply, Freezer 4 Arctic Cooler, Nvidia GeForce 6600, LG DVD RAM burner, 16x DVD ROM, WD 250 gig and an Hitachi 80 gig hard drive. I also used Arctic Silver 5 thermal paste (after using Arcticclean and Surface Purifier). Have I missed somethig? Would appreciate help in solving why I have no hyper threading.

200 7-3-3-2.5 Ultra Turbo and 212 5-3-3-2.5 Ultra Turbo is a
no boot. Thinks ultra-turbo tries to set mem timings to
2-2-2-5 below 218FSB and my memory can't do that.
Turbo boots ok. Normal setting disabled PAT.
200 2.5-3-3-7 Turbo PAT on 4.6GB/s
200 2.5-3-3-7 Normal PAT off 4.2GB/s
212 2.5-3-3-5 Turbo PAT on 4.8GB/s
212 2.5-3-3-5 Normal Pat off 4.5GB/s
Also tried 250 1:1, not prime95 stable
250 2.5-3-3-7 Ultra-turbo 6GB/s
I think pat is disabled above 218FSB on
1:1 and 5:4 setting, but not on 4:5 setting.
You should get close to or above 6GB/s at
1:1 250 3-3-3-5 bios overclocking.
Maybe something is running in the background
stealing cpu power or something?
Well, you have to test some more, maybe a
fresh windows setup will help?

[Other 865 Series] MSI 865PE Neo2-V and Dual Channel Mode Question

Hello, I have a quick question regarding dual channel mode with my current motherboard. I have an MSI 865PE Neo2-V and am wondering if it is possible to enable dual channel mode while having three RAM modules inserted in the motherboard.
For example, I currently have one 512MB PC3200 module in my computer. If I purchase another 512MB module and run them in dual channel mode, will it be possible to buy a 1GB module or another size module, and still have all three slots run in dual channel mode? Or is dual channel only operational on this motherboard if only two of the three slots are occupied?
Thanks.

Dual channel requires an even number of sticks.

MSI 865PE NEO2-V showing wrong RAM timings

Hi
I have a MSI 865PE NEO2-V motherboard with Corsair TWINX2048-3200C2 DDR-DIMM 2048MB Kit w/two matched CMX1024-3200C2 DIMMs now and try to put the timings of the RAM to 2-3-3-6 in the bios.
According to http://www.corsairmemory.com/corsair...h_results.html it should work ok...but its not.
When i check the timings with CPU-Z it shows 3-4-4-8 instead.
The SPD is 3-3-3-8.
I have checked so they are in Dual channel and i have put the RAM voltage to 2.75V after i tried with the default voltage, but to no avail.
To be extra certain i ran Everest Ultimate and it showed the exact timings.
The RAM run fine with StressPrime and Prime95 but i get bad results in SiSoft Sandras RAM benchmarks.
What is going on????

Hi
Yeah, it get slow results.
I have a Intel Prescott 3.2Ghz with FSB800.
I see now that the link uses Java script, its in Corsairs search engine on their site.
Their recomendations for the set of RAM i have is: TWINX2048-3200C2 / DDR-400 (XMS-3200C2) / 2-3-3-6 .
I have tried to set the timings as you said but it still runs at 3-4-4-8 whatever i set it at.
I have it running at 2-3-3-6 on another motherboard so i think it must be some settings in the BIOS that i set wrong on this one, but i cant figure it out.
Could it be that somethings wrong with the Performance Mode (MAT) settings?
I tried it on and off, I have also reseted the BIOS to default and even removed the CMOS battery for a while.
I paste all the info from the Corsair site here:
Facts about the TWINX2048-3200C2
The TWINX2048-3200C2 is a pair of 1024 MByte DDR SDRAM DIMMs designed for extreme speed are some of the fastest 1 GByte modules available. TWINX matched memory pairs are specifically designed for motherboards using chipsets with dual memory channels. This part delivers outstanding performance at high clock speeds. It has been tested extensively in a variety of motherboards commonly used in gaming rigs. This memory has been verified to operate at 200 MHz (DDR400) at aggressive latencies of 2-3-3-6. This module is also available as a single module. This module is available as a single module or a pair of dual-channel tested modules, in both black and platinum heat spreaders.
Facts about this Chipset
The 865PE chipset is a great choice for users who require a complete range of support for the Pentium 4 processor, with high-bandwidth DDR memory and discrete graphics cards. Engineered to optimize Dual-Channel DDR SDRAM memory performance, the 865PE chipset features an 800-MHz system bus, support for the latest AGP8X graphics cards, and high-bandwidth DDR400/333/266 SDRAM memory technology.
Facts about this Motherboard
This 865PE Neo2-V MSI board is flexible and highly scalable solution that meets a broad range of demanding computing needs. The 865PE chipset offers high-bandwidth interfaces such as dual-channel DDR 400 main memory, coupled with an 800 MHz system bus, AGP8X graphics interface, dual independent Serial ATA ports and Hi-Speed USB 2.0 connectivity to ensure the performance you expect.
http://www.corsairmemory.com/corsair/products/specs/twinx2048-3200c2.pdf

MSI 865PE Neo2-V and 1GB RAM stick, compatibility?

Hi all,
I've just bought a new mainboard, the MSI 865PE Neo2-V... I read that supports up to 3GB of DDR333, so now I want to buy 2 new RAM modules.
These modules has the specific:
- 184 memory pins
- 1GB RAM
- PC2700 DDR 333MHz
- 2.5 Module
- Non-ECC, Non-Parity
- CAS latency 2.5
- 128 x 64 High density
Can I mount these RAM on my motherboard? On the photo, the RAM has 16 chips of ram; it seems to be "High density" RAM.
Thanks,
Alessandro.

Romulus76, the answer is YES for the chipset; but NOT SURE for the BIOS. I must ask MSI.

Problem with NIC and Firewire on MSI 865PE NEO2-PFISR

Hi, I have lots of trouble getting the network adapter on the MSI 865PE NEO2-PFISR to work.
The NIC's LED indicators doesnt even light up when I plug in a network cable,
and in windows (win 2003 server) it doesnt find the adapter at all.
The NIC is displayed in the bios, and I have the option to disable it,
but it is enabled.
I have even reinstalled windows 2003 server to try to get the NIC to work.
I have upgraded the bios to v3.8 via live update, with no problems, although the
firewire-option on the same page in the bios is still gone, it doesnt detect the
firewire at all(!).
I have also tried several other NIC's (a 3COM 3C905B TX and a 3C905B TX XL
PCI adapter). The 3C905B TX worked fine for a while, and then it started saying in
windows that a network cable was unplugged, and began to try 10mbit, 100mbit
lots of retries, now it doesnt work at all.
I swapped tp-cables and changed the ports on the network switch (which there is
also other computers attached to which doesnt have any problems) and that didnt
made any difference.
It seems that the whole pci bus is long gone, and maybe the onboard NIC is
attached to this same pci bus?
Strange also about the firewire-controller which isnt detected anymore.
The USB devices work, and even a 3com usb wlan adapter works well.
I have tried to reset the bios several times without that making a difference.
Anybody have a clue to point out here?
Cheers!

Quote
Originally posted by Raven
you could try and flash to an older bios
I tried most anything on flashing bios, both to a lower and a higher version.
I returned the motherboard to the reseller and got a new motherboard as a replacement. This doesnt have all the same problems. At first it didnt post at all, indicating to red lights on the diagnosis.
Then I was so pissed I hadnt touched the computer in a week, and just tried to use it a few days ago, and it seemed to work all ok. I used it for a few hours, and then it locked up.
When I powered it up again, the lights on the integrated adapter was out. At first it seemed to work to take the agp card a little out of its slot, as if it was unaligned or something. Used it for a few more hours.
Then I plugged in the sound cables (5.1 sound with 3 cables), and with the last cable, the network darkened out AGAIN!!
In the bios it still indicates that the network is enabled, firewire is enabled etc.
I twisted the network cable, and for a few microseconds I get a orange light, not the usual green light. Now this has stopped too.
I see other also have problems with these symptoms so I guess I've got another black monday card.
I will return this card too, and ask the reseller to get a card of another brand.

What is the max supported CPU for MSI 865PE-NEO2-LS?

Can someone please tell me what is the max supported CPU speed for the MSI 865PE-NEO2-LS? I have a P4 2.8@800Mhz, but was told that with a BIOS upgrade this motherboard can achieve up to 3.2? Is that right, or can it support higher speeds such as the 3.4+
Thank you!

Hello,
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=433&kind=1
I think A6728IMS.210 means BIOS 2.1 so it may already work with the 3.2Ghz CPU.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=433&kind=1

MSI 865PE NEO2-V booting problems [Solved]

Hi. I've been building a new computer and am seeing some weird stuff.
System Specs:
-P4 3 GHz Socket 478
-MSI 865PE NEO2-V -V22 http://www.saveateagle.com/865pe-ne...EO2-V&ovtac=CMP
-128mb ATI Radeon 9800 pro
-120 GB Western Digital
-1GB dual channel DDR400 PC3200 Corsair
-Ultra 500w X-Connect:
http://www.absoluteinsight.net/2456
-DRW 1108IM ¡V DVD+/-RW Drive
http://www.btc.com.tw/english/2-2-dvd_rw.htm
-Generic Floppy Drive (sentimental reasons )
The system seems to be running (ie no post beeps) but I'm not getting any signal sent to the monitor. I've tried running it out of the case with only the video card connected to the mobo, cleared cmos via battery and jumper settings, and the same thing still happens.
Anyway, I've been talking with other guys on another forum too, but we haven't gtten it to work.
http://www.techsupportforum.com/showthread.php?t=53044
I'm going to try clearing the cmos again because apparently the battery must be out for several minutes, whereas I roughly did one minute. If the mobo has no ram connected, there should be post beeps, right? If so, I better check the case speaker connection again.
Thanks for the help.

I tried removing my RAM and powering -suprisingly no beeps . So make sure its not a faulty RAM, try another one

ATA HD for MSI 865PE Neo2-PS

I have this MB: MSI 865PE Neo2-PS (MS-6728 v2.0) and now I have both S-ATA full: one place HD and second place DVD burner.
I ordered now a new HD S-ATA and find out, that I have only this 2 ports for S-ATA
What would you recommend me - send back this new HD or exist any possibility how to connect this HD. I think this is a stupid question sorry.
I mean which HD would you recommend me if I can not use SATA HD?
Thank you

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=528 this your board?
it supports 4 ata devices and 2 sata devices
look here https://forum-en.msi.com/index.php?topic=25959.0

MSI 865PE Neo2 - Promise 376/378 Driver ?

Does anyone happen to have a link for MSI 865PE Neo2 - Promise 376/378 Driver (Floppy Disc).
I have searched google all evening and no luck.
My floppy disc seems to be corrupt.
Appreciate any help.
Thanks in advance.

Henry - you sir, as they say, are a star
Thank you.

Corsair XMS 3500 + MSI 865PE Neo2 = :(

I have no clue what to do now. I just upgraded my 2500+ Barton and Nforce2 board. I ordered a MSI 865PE Neo2-s , 2 sticks of Corsair XMS 3500 memory and a P4 2.4c.
However, when I install the memory, it refuses to post, but with PC2100 memory (@266 ) it posts and continues to run windows. I manually set the timings for the corsair memory, and set it to 333. Nothing.
This board has the orginial 1.0 bios and I was thinking of trying the 1.1 or 1.2. Other wise I will have to get another board, and I am tight on cash, after buying all this stuff.
Anyone????

Quote
Originally posted by JeffPH
I suggest you flash to 1.6 bios then after set memory voltage to 2.7v and memory timing by speed in bios. GL
@JeffPH, once again : the TS does not have an i875 based board, so no BIOS 1.6 for him.
@TS, you can flash to 1.3 but i doubt it would do you any good.

New Radeon 5770 1GB and old MSI RD480 Neo2 motherboard incompatible?

Hi,
Am having problems getting my machine to post after inserting a new graphics card: Sapphire Radeon 5770 1Gb. Have no problems with my old card in the PCI-E slot (X800GTO) - it works fine. But when I insert the 5770, the machine won't even post.
The core of my machine is ~4 years old, with a MSI MS-7194 RD480 Neo2 motherboard. I've updated the PSU to a Corsair 650W and as the light on the graphics card is on and ATI recommend a 450W PSU I doubt it's a power issue (and yes, I have attached a PCI-E power lead to the 5770)...
Is the issue that my motherboard is too old? Or is there a newer BIOS for it? I tried the MSI LiveUpdate tool which said there wasn't.
So I'm a bit stumped! Am in the process of putting a new machine together, but can only buy 1 or 2 parts each month - I was hoping to make the most of the graphics card before I had to cough up for a new CPU/Mobo!
All help gratefully received - thanks!
PS
Here are my system details:
Mobo: MSI MS-7194 1A RD480 Neo2
Bios: 26/2/2006 version (from msinfo32)
CPU: Athlon 64 X2 3800+
RAM: Crucial, 4x512Mb
GPU: Sapphire Radeon HD 5770 1Gb VaporX (no drivers installed as machine won't even post!)
PSU: Corsair TX650W +3.3V: 24A, +5V: 30A, +12V: 50A. Max combined +3.3/+5: 170W.
HD: SATA1: WesternDigital 200GB, SATA2: Samsung Spinpoint F3 1TB.
DVD-RW Sony IDE0, DVD-ROM Sony IDE1
OS: Windows XP SP2

There has been an on going problem with that model # in general and that brand & model in particular not working on a wide variety of MB's. On some MB's that have 2 16x slots it will not work in slot 1 but will in slot 2.

MSI 865PE Neo2 motherboard drivers...

Similar Messages

Maybe you are looking for