MSI 870-G45 - Can't get into BIOS

So, just built myself a new pc.
It posts, and I have some output on the screen upon boot up, like I see that its detecting my sata hd/dvd drive and everything. Like the topic name says, I can't get into the BIOS.  When it posts, its detecting my keyboard and everything, but it simply hangs at the post screen and I cannot get into the BIOS at all for whatever reason that is beyond me.  I've tried 2 keyboards, one ps/2 and a usb keyboard, nothing on either (the usb is one I went to wal-mart and got today as I guessed the ps/2 wasn't working correctly or whatever).
Tried clearing CMOS (taking out the battery, resetting the jumper and everything).  Still got nothing.
Heres a link to a pic of what output I do have. http://img858.imageshack.us/i/img20110313152042.jpg/ (sorry, don't know how to embed pics into a forum board, not that familiar)

Quote from: littlemanx23 on 14-March-11, 13:10:00
I mean, I'm using a usb keyboard.  Should I try a PS/2?  I mean I've tried clearing the CMOS a handful of times to no avail, nothing.  It just simply hangs at that screen and says CMOS settings are wrong.
I thought you said you'd already tried a PS/2 keyboard and it still hangs?

Similar Messages

  • MSI GE70 2OE Can't get into bios after update

    Hello
    I had some problems with the intel turbo boost not working properly so I updated my bios with the new version from 2013-09-03. After this update the intel turbo boost works fine but since I can't access my bios anymore. Does anyone have a solution?
    Thanks

    Problem solved. It seems that after the update you have less time to press delete to enter the bios.

  • Z68A-GD55 can't get into BIOS anymore

    Just built new Z68 computer gradually over 3 days. Then loaded applications and everything worked great for 2 days. Decided it was done and time to change boot priority in BIOS. Couldn’t get into BIOS. Got splash screen but no further.
    Found forum message recommending CMOS reset. Tried button, jumper, remove battery methods. Still can’t get into BIOS. Get BIOS Prompt ("...press DELETE"), but nothing after that except flashing cursor top left of screen. Back to barebones; same result.  Screen messages before BIOS prompt: 98, 99, A3. Will not boot MS DOS (Win98 version) from USB drive (would before). I’d appreciate any suggestions. Thx.
    Key build steps:
    • Ran Memtest  barebones 48 hrs.
    • Added SSD (ACHI) and Installed Windows 7 Pro. SSD was new.
    • Added, formatted HDD
    • Enabled multi-monitor in BIOS; added Radeon HD6870; 2 monitors on Radeon, none on internal; installed Radeon drivers.
    • Enabled Virtu in BIOS, d-mode; Installed Virtu
    Not overclocked.

    After replacing the PSU with a Corsair TX650M (650w, 3.3v30A, 5v30A, 12V54A), the barebones config could access the BIOS. Installed everything except boot SSD; still OK.
    Before letting the computer boot back into Win7, I connected two old 19" LCD monitors (Microtek C997SD). For setup and testing, I had been using a  24" widescreen. But Win7 had never seen anything but the Microteks, which I intend to use with this computer. Tried to enter BIOS to verify settings were still correct for SSD. Got splash screen -- regular BIOS background, but no Icons (Green Power, Utilities, Overclocking, etc.). Computer locks: PS/2 keyboard (incl. Ctrl-Alt-Del) and USB mouse, do nothing.
    Connected widescreen, verified BIOS OK. Shut down and reconnected Microteks, attempted boot into Win7, and all was OK. I just can't use a Microtek to access BIOS.
    I hope MSI recognizes how valuable the volunteers here are. Your advice solved the problem at least a couple of days earlier than I would have done on my own. Thank you.

  • Can't get into BIOS mode

    ** i also put this question in O.P. topic, because i think that was the wrong one**
    1. Type of computer - HP ENVY dv7-7250nr 
    2. opporating system- windows 8 64bit
    I recently got this computer. It's amazing the only thing that could use a change is the keyboard. I got this as a gaming PC but the function keys can only be accesed when pressing FN. In most computer games the f# keys are your shortcuts. When i go to press mine i have windows changed and the control panal pops up.
    So i was looking around and they say you can go into BIOS mode and turn off the hotkeys. Only issue is i can't get into BIOS mode. 
    I would really appreciate some help on this, i don't want to go out and key a whole-nother keyboard.
    Thank you in advance. 

    Princess.
    Turn on the laptop then tap f10.
    That should get you into the BIOS.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Can't Get Into Bios.

    Hello:
    After  putting together a new system and installing windows I ran MSI's update util.  The first thing I updated was the bios.  I did a windows flash.  It made the recovery disk and flashed the bios.  The machine would not boot after this and I followed the recovery process.  Now I can't get into the bios.  After the first beep when posting I hit and the machine just hangs.  I'm really not sure how stable my system is now.  After the recovery I ran the update util again and tried to install some Intel Inf files and after copying 90% the machine hung.  I was thinking about re-flashing and re-installing windows.
    Thanks In Advance,
    Steve Dessent.

    Can you post the details on your setup - board, video card, power supply, etc.
    And can you clarify where you know stand. If I understand this you flashed to a new bios version, were unable to boot, and you restored the old bios, and are able to boot. Have you gone into the bios to make changes since recovering?

  • Laptop won't boot, can't get into BIOS.

    I have a Satellite P55t-A5116, with windows 8.1. The other day I went into the Toshiba password utility and set a user password, and when the machine reboots, nothing happens. No sign in screen, no place to enter the password, nothing. I cannot get into the BIOS, having tried holding down the ESC, F2, F8, and F12 keys. I also tried holding down the Fn key plus the F2, F8, and F12 keys. I have tried to boot with my Toshiba System recovery disc ( that might be a windows 8 disc, I made it when I got the laptop in March), or an Unbuntu disc. Below is a screenshot of what I get when the machine starts. Did the BIOS get corrupted when I entered the password? If I pop out the CMOS battery, will that fix it? Any help and suggestions is much appreciated.
    Attachments:
    image.jpg ‏966 KB

    I'm not sure how setting the password would cause this. You might want to try these suggestions:
    What can I do if my Windows 8 laptop won't start?
    - Peter

  • Can't get into BIOS on K7N2G-ILSR 6570G

     
    Yesterday I tried to get into the BIOS like I always had done, by pressing delete on start up.  I tried numerous times, and for some reason, no luck.  I then posted on techguy.org.  Someone told me to get a BIOS flush utility from the MB manufact.  I went to the website but couldn't find anything that looked like that.  Can someone tell me what to look for, and why this may have happened in the first place. 

    I have spent the last 2 hrs with this computer.  I finally tried a different keyboard after I had cleared CMOS and then it wouldn't let me press either del or F1.  I was stuck, so changed keyboards and now everything is fine.  I also managed to clean all the components and dust it out good while in there.  Thanks for your help.  I'm back in business!!

  • Can't get into BIOS on new Z97M-G43 Mobo

    I just received all the components (below) for a new build.  When I power the system up, I get a screen with the following:
    EFI Shell Version 2.31 [4.633]
    Current running mode 1.1.2 Map: Cannot find required map name
    Press Esc in 5 seconds to skip startup.nsh, any other key to continue
    Regardless of what I do, I cannot get into the BIOS.  I have tried clearing the CMOS using the procedures documented here on the forum - both removing the CMOS battery and by using the jumper, both with the power off.
    I removed all non-necessary connections - USB, HDD, DVD.  The only things connected are power and the front panel power, reset and LED.
    When I remove 2 of the 4 memory modules and restart, I get a message saying that the CPU or memory changed and to press F1 to go into setup.  When I press F1, I only get a black screen.  I also get a black screen if I press DEL repeatedly after turning on the system.
    I am using a HDMI connection to my monitor.
    What is the magic to get into the BIOS, or does this suggest something is wrong with the Mobo?
    Many thanks!

    Quote
    Regardless of what I do, I cannot get into the BIOS.  I have tried clearing the CMOS using the procedures documented here on the forum - both removing the CMOS battery and by using the jumper, both with the power off.
    remove power cord from the PSU 1st
    then do >>Clear CMOS Guide<< and retest
    Quote
    MEM: GSkill 4x4gb F3-14900CL9D-8GBXL
    also try with 1 memory stick only

  • ThinkPad E330 can't get into BIOS anymore

    I tried to install Ubuntu on a Thinkpad E330  that had Windows 8 preinstalled, from a USB key. It was a 32 bits version of Ubuntu, just for a trial. I accessed the EFI bios from W8, shifted to legacy BIOS mode and installed Ubuntu w/o any problem, on a set of separate partitions. Works like a charm (although I would like to shift to 64 bits).
    The problem is that I would now like to go back to EFI mode to access W8 and install a 64 bits version of Ubuntu for EFI but I cannot access the BIOS anymore to put it back to EFI mode. Although the screen says "press F1 key to enter BIOS" or "Press Enter to interuupt normal boot process", the F1 Key does not work, the Enter key does no better. 
    I found plenty of posts of people in a similar situation, that tried to clear CMOS (does not work) and all ultimately  point to the user "someotherguy" that apparently saved them. I tried to pm him but he does not react to my private messages. 
    Is there anybody else that could help me here ?
    Thanks
    Thomas
    Solved!
    Go to Solution.

    For those who like me could not access their BIOS because they put it in Legacy mode:
    I must first thank someotherguy for his help.
    After different trials, the success was reached by opening the thinkpad (3 little screws) and the CMOS battery. The reboot gave me access to the BIOS and I shifted it back to UEFI mode and thus regained access to Windows 8 (and therefore to the BIOS again).
    I will now proceed with Ubuntu installation...in UEFI mode (as I intended initially but did not do because I has a 32 bit version of ubuntu already on a USB key). 
    Thomas

  • Dv9000 series - how to get into BIOS

    How can I get into BIOS and how can I re-dedicate graphics memory-use there? (Maybe my other's post was too special...)

    Oh, THAT's interesting to learn that chances are high, they either changed the whole mobo, or the system wouldn't run stable with damaged graphics memory...(An ugly one: would it be worth exchanging the mobo and do all that counterfeiting data just for the value of the old mobo???) Here's what I found so far: (I used "SIW System Information for Windows"-tool to get the following data, among a lot of other)- Serial-# matches my serial-# as per the original packaging, paperwork and bottom of the machine- Model 103C_5335KV (another way to denote the model KP964EA/dv9787eg?)- NVIDIA 8600M GS with (only) 256MB DDR2 64bits- dedicated video memory 239MB (251199488)- dedicated system memory 0MB- shared system memory 1279MB (1341353984)- Mobo is a Quanta 30CB 79.2E (no serial-# found/supplied by SIW!) I will check the hardware again by "reading out" data with Fn+Esc and/or CPUZ and GPUZ and report back (as said, I think the info there said KP964EA already - just to make sure)... Just for the guessing or "narrowing the problem down":IF my system was running on 256MB before already (and hp advertised wrong data for my rig) - so no change there - what else might cause my games running roughly now and be a reason for the dropped performance-index in windows?Possible that the graphics chip is able to perform with 256MB only and I would need another version of the 8600M GS which IS able to make use of the 512? (Guess no, as the above info TELLS me that there is only 256MB - and no 512MB - available, right?)CAN that be related to some software or driver?Would/might setting up windows anew (or changing from Vista to 7 for that matter) might bring me back to speed? Anyway, let me tell you that I VERY much appreciate your help on this - I am kind of lost on my own here, and I will try whatever I can to get back my "old" great-performing machine.

  • MSI 870-G45 Motherboard - Can it fit two MSI GeForce GTX 550 Ti 1GB Cards?

    MSI 870-G45 Motherboard - Can it fit two MSI GeForce GTX 550 Ti Cyclone II 1GB Cards?
    I'm planning to buy a MSI 870-G45 ATX AM3 Motherboard and two MSI GeForce GTX 550 Ti 1GB Cards, in order to run multiple monitors.
    However my concern is that the cards might not fit into the motherboard.
    So could someone please tell me if those two cards will fit into the motherboard?

    It means that an x16 PCI-E video card will only get x4 lanes instead of x16 when used in that slot.
    http://eu.msi.com/product/mb/870-G45.html#/?div=Detail
    Quote
    Slots
    • 1 PCI Express 2.0 slot with x16 operation (PCI Express Bus SPEC V2.0 compliant)
    • 1 PCI Express 2.0 slot with x4 operation (PCI Express Bus SPEC V2.0 compliant)
    • 1 PCI EXpress x1 slot
    • 3 PCI slots, support 3.3V/ 5V PCI bus Interface.

  • Can no longer get into BIOS, always goes to system diagnostics

    After changing some settings in BIOS the system won't boot anymore.
    But the real problem is that I can not get into the BIOS anymore. When started the system goes straight to System Diagnostics.
    When I continue I get the message:
    BootDevice Not Found
    Please install an operating system on your hard disk.
    Hard Disk - (3F0)
    When I go to the startup menu and try to enter Boot Device Options(F9) or Bios Setup(F10) it still takes me to System Diagnostics.
    The system passes all system diagnostic tests.
    I don't understand why I can't get into the BIOS anymore, this should always be possible right? How can I fix this?
    Any help is greatly appreciated.

    @WB__ 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Now RAID BIOS Hangs-Can't get into it!!

    Folks - On a new build, the BIOS (v1.6) on my Neo4-F worked fine. I was trying to get Windows to not lose missing nt___ files. I kept deleting arrays and trying new array configs, reloading windows (yes, loading the RAID drivers with F6), but Windows still wouldn't load due to missing dll's.  Now when I set the RAID SATA settings in the BIOS, save & exit, on the reload it hangs at the Nvidia RAID ROM BIOS screen "Detecting array..." and won't go any further. So I have to power down, reset the CMOS to get the BIOS back.  If I go in and reset the SATA RAID drives, it'll do the same thing, otherwise if I don't set the RAID, it'll go on to load Windows as normal.  What happened and how can I get into the RAID BIOS again???  Thanks 

    Try having just one connected and boot . (do a cmos clear also ) .
    You can also leave the drive powered , and just insert/remove the sata cable when system is running .
    Just don't plug/unplug the HDs power connector while system is powered on.
    Sometimes the raid hangs if the drive order has been reversed (the raid mirror is confused whats drive #1) .So you should also try switching the drives on the connected sata ports .
     

  • MSI 870-G45 - something odd is going on with MSI

    Ok, this is convoluted but bear with me.
    I bought the MSI 870-G45 (MS-7599 v2.x) motherboard from Newegg. Newegg listed the chipset as the AMD 870. However, when I received the motherboard, the manual states that the chipset is actually the RX 780 (a.k.a. AMD 770 a chip from 2007/08!), I checked in CPU-Z and confirmed this. I built a rig with this motherboard on 8/15/2010.
    I have been having all sorts of issues. These include memory errors when running memtest86+ or HCI memtest.
    Today I come on to the MSI website to do some research on the motherboard and I see that the MSI 870-G45 is now listed as a "NEW" product and the chipset is now the AMD 870, as I originally thought. In fact, MSI has two versions of the 870-G45, depending on what link you visit. See the two links below:
    http://www.msi.com/index.php?func=prodmbspec&maincat_no=1&cat2_no=&cat3_no=&prod_no=2070
    http://us.msi.com/index.php?func=prodmbspec&maincat_no=1&cat2_no=171&cat3_no=&prod_no=2019#menu
    The version I ended up with is the one in the first link.
    Now, I have the AMD Athlon II X4 635. The product info page at AMD states that the voltages should be between .85v and 1.25v. ( http://products.amd.com/en-gb/DesktopCPUDetail.aspx?id=625 ) However, even though the BIOS of this motherboard (the version with the 770 chipset, which is the one I got) supports this CPU, the "Auto" CPU voltage setting sets the voltage at ~1.35v - above the specs specified by AMD! Wondering if this might also be a cause of the difficulties I am having, I lowered it to 1.12. Running some more tests to see if this has improved stability.
    So, two versions of one motherboard, with confusing numbering and Auto voltage that exceeds the specs from the CPU manufacturer. What the heck is going on?
    Another issue is that the manual states on page 2-6 (21 on the PDF) states that to be in dual channel mode, I need to put my two DIMM cards in the slots DIMM1 and DIMM2. However, further down the page under the heading "Important", it states:
    In Dual-Channel mode, make sure that you install memory modules of the same type
    and density in different channel DIMM slots.
    This seems to be contradictory, but it is probably just me. Does it mean I install the two DIMMs in DIMM1 and DIMM2 or DIMM1 and DIMM3?

    Thank you both for your input. I mistakenly thought this was run by MSI. Feel stupid. But since you were so kind to respond, I'll post my full system specs as you suggested:
    AMD Athlon II X4 635 CPU
    MSI 870-G45 AM3 Motherboard
    G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (F3-12800CL9D-4GBNQ)
    GIGABYTE 1GB GeForce GTX 460
    SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM
    ASUS DRW-24B1ST SATA 24X DVD Burner
    OCZ ModXStream Pro OCZ600MXSP 600W ( +3.3V@25A, +5V@25A, +12V1@25A, +12V2@25A, [email protected], [email protected] )
    OS: Windows 7 Ultimate 64-bit.
    Also just discovered that there are two versions of my CPU (C2 and C3 revisions). Perhaps that is where some of the confusion regarding voltages lie. Again, feel stupid.
    Issues in a nutshell:
    Computer ran fine for about 10 days. Then booted up a game and got crazy artifacts everywhere. Windows 7 also showed some artifacts when I went back to desktop. OS never crashed though. Windows has never crashed. Because of this, I suspected that my GPU went bad. Ran OCCT GPU test, Furmark and ATI tool and have artifacts on all three. Artifacts appear immediately upon starting test, so I don't think it is temperature related. Temp of GPU is under 40 C idle and highest under load is 77 C, which falls in line with what I read in reviews for card.
    Now, before RMAing by video card with Newegg, I decided to download memtest86+ and run it. Just a hunch. I got an error on the first pass in test 2. However, I continued to run the test and saw no more errors. Ran the test again overnight for hours and could not recreate error. Thinking I may have gotten a false positive, I ran HCI Memtest (this one runs in Windows) and ran it for a few hours. That reported multiple errors as well. Now I am trying to run the test with one DIMM at a time to see if I can isolate which stick it is.
    So I guess my questions are:
    * What are the chances that I got a bad GPU and bad RAM from Newegg? Anything is possible but I thought that getting two lemons was unlikely, and when I then saw the discrepancies in the motherboard info on MSIs website I started to wonder.
    * Could bad DRAM have any effect on GPU - as in displaying artifacts. Or would this strictly be a GPU issue?
    * A member at another forum warned against leaving voltage settings in BIOS at Auto. This is what led me to look up the specs at AMDs website. What do you think about this recommendation.
    Sorry if I came off a little harsh, I thought I was addressing MSI the company and was a bit miffed by two different versions of a board and with the fact that newegg was improperly stating the specs.
    I appreciate any help you can give.

  • Updated my UEFI - Now I can't get into gummiboot anymore

    I have an UEFI Msi motherboard, which I've just updated. I run a dual boot system with windows7 and arch.  After rebooting, I can't get into gummiboot anymore and the "Linux boot manager" entry in my UEFI is gone. The only thing left there is "Windows boot manager", which causes the system to directly boot to windows without giving me the possibility of changing to linux.
    - Secure boot is disabled
    - Fast boot is disabled
    From what I know, upgrading the bios/uefi shouldn't even touch my bootloader at all, how could this happen? What do I have to do to get gummiboot back?
    edit: When I chroot into the system and try to "gummiboot update", I get: "File system /boot is not a FAT EFI System Partition (ESP) file system."
    Last edited by Nordic89 (2014-07-31 10:09:49)

    mrunion wrote:
    On UEFI systems the "boot" information is stored in NVRAM, so upgrading the "BIOS" (not the right word) might affect that. On my machine, you can "edit" the NVRAM entries (the boot entries) somewhat from the "BIOS" (again, not the right word). Windows has a tool to edit UEFI entries (bcdedit or something) that you may be able to use to add your gummiboot entry back.
    *Note: I am assuming by say "Updated my UEFI" that you meant you updated your -- what used to be called -- BIOS.
    The word you're looking for is 'firmware'. UEFI firmware and BIOS firmware.
    Sorry.... carry on...

Maybe you are looking for