MSI 870A Fuzion.... BIOS keeps resetting it self after restart,

HI NOOB here
I've just brought my first ever parts for my first ever computer build.....fitted everything perfectly and booted....
1st: logo screen came on
then another screen came saying low battery, thunxsomething...IDE, bios clock unset...."hard drive not detected"
3rd: screen came up asking either f1 to go into bios f2 to load defualts
i pressed f2 little dash flashes in the top corner
rstarted with second {the same procedure as explained }try ubuntu live usb loads......
after shutdown and installation of OS
i attempt to troublkeshoot the issue of bios time, IDE, and no hard drive detected
by going into the bios... which was totally from whats expected i.e. in colomns instead rows
i was expecting bios style shown below however after thought i got adjusted to the new rows one
http://www.tomshardware.com/reviews/x48-motherboard-comparison,1781-5.html
loaded optimal settings, changed bios clock and date, adjusted boot preority
saved AND EXITED
BUT foud that my MSI 870A Fuzion.... BIOS' keeps resetting it self to factory defualt... ,
AND>>>>>>>>>>>>>>>>>>>>>>>>>
also found that it didn't go directly into the NEwly installed OS.....
HELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELPHELP
I'm its quit anoying knowing that this is my first ever computer build

Quote from: npm1 on 18-November-10, 22:29:03
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
just as an extra, a small splat of water went on the board i simply wiped it away........(happened before first boot) would this by any chance affect the bios
Quote
it restarts as expected but it doesn't save it........and it continues saying no hard disk detected low battery even though its connected to psu and say IDE....even though i have sata connectors......
what message exactly you are getting at bios post screen?

Similar Messages

How to keep my created network after restart

hi,
my mac mini is just used to be connected to a videoprojector. so i don t connect a screen or mouse, keyboard or else.
i have access to it through the wireless network i created on the macmini.
but if i restart the macmini, the network is gone and i have to connect mouse keyboard, sceen, to re create the network!
my problem is that i only have access to my mac mini by wireless network . but i don t want to share internet access. just have a network between two macs , to access to one with share screens.
If i create a network, and then restart, the network is gone. it disappears.
so if i restart my mac mini via screenshare , there is no network. and i can t have access to the mac mini anymore.
how can i keep this created network after restart?
i tried to make it work with automator but kind of didn t make it to work

Do you keep other settings (e.g. in Options) that you make in Firefox?
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

MSI GX660 - Bios keeps resetting.

Dear reader,
I have a problem.
Yesterday I got my laptop, i installed a SSD corcair disk, formated the local harddrive, and in bios I set SSD hardrive to be the first in the boot order.
Working flawlesy.
But.. when I want to use it again and start it, the bios is reset. the SSD is last again instead of first..
Tried to save it and checkd that I am taking "Save before exit".
Any ideas?

Quote from: Romeon on 30-October-10, 05:51:15
Thanks for the swift reply,
I am not sure, I don't know what I can change that wont harm the computer (I am not familiar with bios), any tip what I could change to check?
Romeo
Well try change Intel SpeedStep, Disable it, or Quick Boot Disable it, or PCI Latency timer from 32 to 64
Then save and exit, then go back to BIOS and check if the settings are kept or reset to default one

Volume reset to zero after restart

i have a problem with my system, i dont have any answer, why my front channel volume always reset to zero after i reboot my system??
could anyone help me??
thx before...
sorry for my english...

thanks a lot,i was having the same problem as well
OP: please mark this thread as SOLVED

[MSI P4MAM2-V] PC keeps reseting when booting/installing windows XP

G'day fellas.
I bought a MSI P4MAM2-V yesterday, with new ram, psu, videocard but use a previous hdd.
Now this hdd has XP already on it, so i tried booting into that with my new system. as soon as the logo for XP came up, the pc shutdown. Werid. So I try another hdd, this one was win 98, and it works fine. strange I thought. So i tried another hdd with XP on it and the same thing happened. thats 2/3 hdds that wont boot and both have XP.
Anyway I formatted the win98 disk using the ultimate bootdisk and then tried a fresh install of XP (using my 'special' xp pro disk) and it didnt work. When it gave me the option in dos to select to make a new installation or repair and old one, it shutsdown. I tried my legit XP home cd - same thing happens
I've tried different cdroms, ide cables, PSU's. ive removed the gfx card and used onboard. I've fiddled around in the bios. i've changed ram, ive run tests on my hardware using the ultimate boot cd.
I have no idea why its having a cry over XP.
any ideas?
Cheers

I can understand the pervious XP not working.
im using a 2.53ghz celery
512mb ddr400 kingston
gigabyte cdrw
I think this is my PSU: http://hardware.gamespot.com/Thermaltake-Silent-Purepower-TT-420AD-420-Watt-13045-S-16-23
I know its a thermaltake 420w, but ive spraypainted over the label. anyway atm im using a generic psu, but i did try with the TT.
these are my basic specs that im running with and a 15gb seagate hdd (the one which is now clean), a 120gb maxtor (has XP on it) and a quantam fireball 15gb with XP.
btw thanks for the quick reply

Why does my AOL keep resetting it self only on this browser

I will have my AOL email up on my Firefox Browser and every so often the AOL email will just reset itself and say "you have mail", and close whatever mail I had open. If it was new mail it will put it in the old mail file.
This is not happening when I open my mail in I.E or Google Chrome. I did get the AOL mail that went with Firefox.
Would you know how to fix this?
Thanks,
Jim

The AOL toolbar - the AOL website itself, even - is probably making your computer sad. I can't even fathom using those ancient, horribly-made things. You should consider switching to a modern email provider.
If you really want to stick with AOL, you should contact their support.

What do I do when my iPad keep resetting it self???

My iPad mini has been constantly resetting itself over the last week. I have wiped it clear twice and it still has been resetting. DOes any one else have any other ideas on how to get it to stop????

You need to find a WIFI location. There are free ones at Starbucks, McDonalds etc. But be very careful as those are not secure networks.
Or you need an iPad with cellular data capabilities.
Or you get a personal hotspot from a cellular provider.
Or you need to turn on tethering on your phone and link to the phone. Using a cellular iPad, a personal hotspot or tethering is the only way to get WIFI in your car while it is moving.

MSI 870a Fuzion

Hello, I currently just got this new Mobo, and am having trouble with my SLI and how to get it set up.
I have two nvidia GTS 250
one problem is that when I open nvidia control panel, i dont have the option to " Set SLI and PHYSX" it only have the physx portion.
also when I go into the bios I see nothing to enable the SLI option.
the mobo is running with the new "hydralogix" I was wondering what i need to do, to use both my nvidia graphics cards.
anyways if someone could get back to me asap and give me a hand that would be great. thank you!
Josh

Fuzion Multi-GPU Mode is actually not the same as SLI. The effect will be similar, but it is really not the same:
http://www.lucidlogix.com/faq.html
Make sure you use the latest drivers:
http://www.lucidlogix.com/driverdownloads.html

MOVED: 1055t and a MSI 870A Fuzion AMD 770

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=142419.0

You are trying to run XMP profile memory which is meant for Intel systems and not AMD. Courtesy of Hardware Canucks, the explanation is a s follows:
Quote
By now, we should all be used to Intel’s Extreme Memory Profiles (XMP) which basically sets aside a pre-selected space within memory modules for specific SPD profiles. This benefits everyone from overclockers to novices as it gives them pre-defined values for specific usage scenarios.
Following in Intel’s footsteps, AMD has now introduced Black Edition Memory Profiles or BEMP. While BEMP certainly doesn’t have a particularly sexy ring to it like XMP, its functionality is virtually the same and can be controlled directly by the user. One of the main differences between XMP and BEMP is the way profiles are stored; XMP uses a portion of unallocated space within the modules themselves, AMD’s solution uses online profiles for the memory. This allows for the memory manufacturers to add additional profiles once their products have shipped but it also means BEMP is tied at the hip to AMD’s Windows-specific Overdrive utility. Once set up properly, these memory modules will effectively increase memory frequency, lower timings and bump the Northbridge frequency for additional performance.
You can try and manually find memory settings that will work, but I shall refrain from guaranteeing stability.
For a start I would use only one module and set the DRAM ratio manually so that your mem runs at 1066. Suggested timings as per the JEDEC#2, i.e 8.8.8.22. You should be OK with the CR at 1 at 1066 but you may have to change that to 2. Start your OC attempts from there and let the mem gradually increase as you increase your FSB/HTlink. Once your mem gets closer to 1333 change the timings to 9.9.9.24 as per JEDEC#3. You can also use those timings right from the start to avoid any instabilities as the DRAM freq increases from 1066 to 1333.

Why my iPhone 4S keep reseting by itself after iOS 7 update?

Hello:
This s not funny at all. After I updated to IOS 7.0.3 couple weeks ago, there s several times my phone is reseting by itself.
When I try to turned ON again, s telling me the battery s dead and need to connect it to the power source.
After connected, is coming back again to the live and telling me the right charge of battery I had before.
Battery it was never empty or close to be. Always is around 50 % of capacity.
This happens on the middle of a call, texting or mailing.
Tell me what I could do to stop this mess up,
Please.

janirch wrote:
I tried everything. I restarted it, I putted it on factory settings, I deleted every App but nothing helped.
In Apple Store, they told me that it is a hardware problem and my phone isn't able to use the new iOS 7.1 because my phone is too old but it's only 2,5 years old.
I suspect that something in that conversation was seriously misunderstood. The iPhone 4S runs iOS 7 without any issues.
If the device has a hardware issue, then it does not matter what version of iOS is on the device, it will not function properly.

Volume keeps resetting to halfway upon restart

Hi, every time I restart my notebook the volume resets so that it's halfway on the volume slider. Shouldn't this setting be saved? How do I change it so it does save?

I'll take a look, thanks. I have a brand new MacBook Pro running OS X 10.5.6.
Update: Just before posting this message, I checked my sound settings after booting up my notebook and it was actually saved to the last state. Then after I wrote the above message, I plugged in my earbuds thinking everything was gonna be ok and an alert sounded which about scared the bejesus out of me. I rechecked the sound settings and it was back in the middle. Grr!
I've got the Sound Preferences window open right now and when I remove the earbuds, the output volume goes back down to what it was saved as. When I plug it back in, the volume jumps to the middle. I turned the volume down with it plugged in and tried the above test again. Now it toggles between both saved settings, which is what I'd expect.
Message was edited by: happyandsad

Dynadock V Keeps Updating same driver after restart and wont connect to external monitor

Earlier this week dynadock did an update and now everytime my computer turns on it installs the same update and says successfully installed. Ever since this started my second monitor connected through dynadock is not working. I've checked cords, cycled power to everything and still the same.

Performed system restore as far back as it would allow me, but i do not believe that it was far enough. Still had same problem. I attempted to uninstall only the video driver, and it failed, so i attempted to uninstall all of dynadock and everything but video driver uninstalled it failed again. restarted tried again failed again. So i'm running the install cd now see if maybe i'll get lucky and it'll work it'self out. but i doubt it.
Any idea how to get the video driver uninstalled? I can't find it under device manager either.

Imovie resetting photo duration after restart

ok, so I have several movie projects in imovie 08 without big issues, however, this time instead of using videos I used photos to create a video slideshow. I set the duration for the photos by clicking on the little "clock" button on the bottom of the picture and then checking the "apply for all photos", which did nothing to set the duration for every picture. I ended up setting the duration for the pictures on each one manually but when I reopen the program to work on the project later on it has already reset the duration of the pictures to random times. I also tried adjusting the duration by using the "project properties", but here is the same problem, it seems to reset itself to whatever it feels like...any suggestions on how to fix this issue?

yes please...have exactly the same question...anyone?

Whatsapp messages keeps on deleting automatically after restart.

Hi
I am facing a problem recently. When I restart my phone after a long shut down the whatsapp looses its old messages. Everytime the phone is restarted the whatsapp is like new no messages. Searching about it for a while but cant find any solutions. Please help.
Regards
Ankush

That's not normal behavior. Have you tried any of the user troubleshooting steps as outlined in the manual? Restart, reset, restore, restore as new?

My macbook keeps losing wifi connection after restarting and I can't connect to my wifi in recovery mode

I have two problems actually, which I think are connected.
I installed a new hard drive and am in the process of returning my macbook pro to normal. I'm now using Mac OS X 10.6.8 and I want to be able to update to OS Lion.
When my computer is on it can connect to our wifi without any problems (so the password is working). However, everytime I restart, it looses the connection and does not automatically reconnect. This never happened before and I can't seem to figure out where I can change this. All I have to do to reconnect is go to the wifi symbol and choose our wifi code. It then automatically connects without me needing to type the access code.
The seconde problem is when trying to update to OS Lion, when in recovery mode, all I get is a screen asking me to connect to wifi. I choose our wifi and now I do have to type a password, but whatever I do, it does not accept the code. It has nothing to do with capslock or anything like that.
We are sharing our wifi with our neighbour, so changing the password is not an option. But is is just a simple letters and numbers password.

Why not do a "Restore" in iTunes to set it back to factory settings? That will eliminate any previous information that is causing you issues in use. You will have an iPod which you can sync as if it is new with your settings and info.

MSI 870A Fuzion.... BIOS keeps resetting it self after restart,

Similar Messages

Maybe you are looking for