MSI 875P NEO FISR ( pcb 2.0) OVERCLOCKING database

TO ALL MSI 875P NEO FISR ( pcb 2.0):
POST YOUR OVERCLOCKS HERE

What I can achieve............ does not mean you can achieve.
I can do stable:- 3Ghz on 2.4Ghz 533 Northwood - 3.4 on 2.6 Celery Northwood 400 - But only 3.3 on a 2.8 800 Northwood.(That's on 875 Ver 2)
Depends on CPU, 865 is better for OC work on 478 and PRESCOTTs never used (Stupid dynamic core)

Similar Messages

MSI 875P NEO FISR ( pcb 2.0) database

how to unlock multiplier in this mobo? and vcore is locked?
all 875P neo users can contribute in here.

Quote from: Maesus on 27-October-05, 03:02:59
The multiplier on the motherboard has already unlocked. BUT!!! the CPU you used are all locked :P Unless you maange to get an unlocked engineering samples from the grey market.
how? buy a new processor?

[875P Neo Series] MSI 875P Neo-FISR adn ECC registered DIMMS

I have purchased the MSI 875P Neo-FISR (PCB 2.0) and installed a 512MB DDR333, PC2700, CL2.5, ECC registered dimm (HYS72D64300GBR-6-C) but the system won't boot up. I have a Intel Pentium 4 3 GHZ CPU, 512K cache, 800 MHZ bus installed. When I install a 512MB PC2100 unregistered the system works OK, but not with the registered ECC registered DIMM. In the manual it is quoted as saying it supports this type of memory. I have updated the BIOS to the latest version from the MSI website. Any ideas ????

I have currently have
P4 3 GHZ 800 MHZ bus on MSI 875P Neo-FISR, 2x512MB PC2100 RAM (currently working OK)
2 x seagate 250 GB SATA drives in RAID 0 ccombination
Sony 8 x DVD writer
32MB GeForce GTS AGP graphics card
Matrox RT.x100 Extreme Pro video editing card
Craetive sounblaster live 5.1
but would like to add the 2x 512MB PC2700 registered ECC dimms I just bought if at all possible !!!!!!!!!!!!!!!!!!!
damn manual giving me incorrect information !!!!!

875P Neo FiSR (PCB 2.0)

Hi, I have this mobo with a prescott installed on it. Unfortunately this mobo doen'st support any vcore changes trough the bios. I allready flashed it to the latest bios (3.6) with no effect. The only way i'm able to adjust the vcore settings is through corecenter, but I rather do it through the bios.
I read this old topic over at ocforums where some guy named Dcasole claimed to have solved the problem:
MSI 875p NEO FISR no vcore adjustment for prescott?
In his post he refers to an older topic from this forum:
Workaround to unlock Vcore
Unfortunately this topic he refers to is allready off this forum. So if theres anyone that could give me the solution pls share it! (or Dcasole if youre reading this pls let me know how to fix this.)
All help appreciated.

Nick, download " Core Center " and use it to adjust your Vcore but use the bios for other adjustments( FSB) as it will be much more stable ( Core Center is to buggy for me to use for overclocking)
As Del states becareful when changing this value as the prescott employs what is known as Dynamic VID which means that the chip will vary the vcore according to the load that is placed upon it in an effort to control the heat
Also before changing it make sure you have a cooling solution as raising my VID .4 raised my temps 10 degrees C
But be forewarned !If you were to set your vcore at the high limit of what your chip can handle , Dymanic VID could push it over the edge
Read about why MSI chose to lock the VCore down in our boards here
Prescott Dangerous Tweeks
And some more on Dynamic VID
Dynamic VID
Hope this helps
Dave
PS - I am running at 3.59 stable ( 2.8E) with the stock VCore of 1.36 , Don't be quick to raise it till you see what you have at the stock level

[875P Neo Series] 875p Neo-FISR (PCB 2.0) Major problems

I just upgraded my system from:
P4 Northwood 3ghz
Gigabyte (obsolute old motherbord)
2 x 512 Hynix pc3200 (400mhz)
ati x800 xt pe 256mb 1,12 ghz
450w NorthQ Silent PSU
Now i was reading a lot of benchmarks and tests and finally i bought the 875Neo-FISR...
So what happened when i did a clean install?
I went from 4500 testscore in 3Dmark05 and down to 3000 - i was expecting to hit over 5000 with the new motherboard.
I have testet the ram (swapped them with some other kingstons and geil same scores roughly)
I got the newest dx and ati drivers etc. i even tried the omega drivers, but no drivers can make up for a difference of 2000 in score result.
Also i read that the bios would now read the prober degrees with the new bios - but my bios allways says 75 degrees celsius and when i boot into windows xp (sp2) its on 60-65 and then goes down to around 37-40 as xp stops loading.
I tried checking for heat problems on the mainboard - and the hottest thing is the cooler on the canterwood chip - 2nd hottest thing is the ati card.
Anyone have any idears? Perhaps its a defect card or any suggestions out there?
Regards.
Forgot to mention that all drivers and utilities etc are ofcause fully updated.
Right now i am running a clean windows xp install with sp2, dx9c and ati drivers + the MSI drivers.

Put my old motherboard back in...
Quote
RAM TEST:
SiSoftware Sandra
Benchmark Results
RAM Bandwidth Int Buff'd iSSE2 : 2912 MB/s
RAM Bandwidth Float Buff'd iSSE2 : 2906 MB/s
Results Interpretation : Higher index values are better.
Int Buff'd iSSE2 (Integer STREAM) Results Breakdown
Assignment : 2915MB/s
Scaling : 2915MB/s
Addition : 2910MB/s
Triad : 2911MB/s
Data Item Size : 16 byte(s)
Buffering Used : Yes
Offset Displacement Used : Yes
Bandwidth Efficiency : 91% (estimated)
Float Buff'd iSSE2 (Float STREAM) Results Breakdown
Assignment : 2910MB/s
Scaling : 2908MB/s
Addition : 2903MB/s
Triad : 2903MB/s
Data Item Size : 16 byte(s)
Buffering Used : Yes
Offset Displacement Used : Yes
Bandwidth Efficiency : 90% (estimated)
Performance Test Status
Run ID : RED on 2. november 2005 at 13:26:36
Memory Used by Test : 512MB
NUMA Support : No
SMP Test : No
Total Test Threads : 1
Multi-Core Test : No
SMT Test : Yes
Dynamic MP/MT Load Balance : No
Processor Affinity : P0C0T0
Page Size : 4kB
Use Large Memory Pages : No
Chipset 1
Model : Silicon Integrated Systems (SiS) SiS648 CPU to PCI Bridge
Front Side Bus Speed : 4x 201MHz (804MHz data rate)
Width : 64-bit
Maximum Bus Bandwidth : 6432MB/s (estimated)
Logical/Chipset 1 Memory Banks
Bank 0 : 512MB DDR-SDRAM 3.0-3-3-8 2CMD
Bank 1 : 512MB DDR-SDRAM 3.0-3-3-8 2CMD
Channels : 1
Speed : 2x 201MHz (402MHz data rate)
Width : 64-bit
Maximum Memory Bus Bandwidth : 3216MB/s (estimated)
Features
(W)MMX Technology : Yes
SSE Technology : Yes
SSE2 Technology : Yes
HTT - Hyper-Threading Technology : Yes
CPU Test
SiSoftware Sandra
Benchmark Results
Dhrystone ALU : 9079 MIPS
Whetstone iSSE2 : 6641 MFLOPS
Results Interpretation : Higher index values are better.
Performance Test Status
Run ID : RED on 2. november 2005 at 13:24:35
NUMA Support : No
SMP Test : No
Total Test Threads : 2
Multi-Core Test : No
SMT Test : Yes
Threads per Core : 2
Dynamic MP/MT Load Balance : No
Processor Affinity : P0C0T0 P0C0T1
Number of Runs : 64000 / 640
Processor
Model : 1x Intel(R) Pentium(R) 4 CPU 3.00GHz
Speed : 3.02GHz
Performance Rating : PR4010 (estimated)
Cores per Processor : 1 Unit(s)
L2 On-board Cache : 512kB ECC Synchronous, ATC, 8-way set, 64 byte line size, 2 lines per sector
Chipset 1
Model : Silicon Integrated Systems (SiS) SiS648 CPU to PCI Bridge
Front Side Bus Speed : 4x 201MHz (804MHz data rate)
Features
SSE2 Technology : Yes
SSE3 Technology : No
SSE4 Technology : No
HTT - Hyper-Threading Technology : Yes
As you can see the ram now perform considerably worse but the cpu is actually beeing used now.
So i reckon i got a defect motherboard.
Sadly the company where i bought it wont switch it with a new one before its been back to the factory and i aint waiting a month on a new board :(
So think ill just use my 14 day return rights and get a asus instead.

Overclocking an MSI 875P Neo-LSR Bios 2.2

Here is my configuration :
CPU : Intel Pentium IV 3.2C 800Mhz HT
RAM : 1Gb [2x256MB DDR-400 PC3200 Infineon] + [2x256MB DDR-400 PC3200 Kingston]
GC : Club 3D Radeon 9700
MB : MSI 875P Neo-LSR Bios 2.2
HDD : 120 Gb Maxtor 8Mb cache + 40 Gb Western Digital 2 Mb cache
CPU Fan : Zalman CNPS-7000AlCu
Yesterday i tried to use CoreCenter and went to 215MHz (3.6 Ghz i think) with no hitch.
Now my question is with this configuration what can i reach and what to use (CoreCenter or Bios) ?
And which OC for the memory ??
Tx

I think use bios is better because of more flexibility. You can go up to about 3.5GHz.
please read:
Overclocking Guide

[875p Neo FIS2R(PCB 1.0)] BIOS/OS ramtiming problems

First off, hello to you all. This is my first time here since I recently bought an MSI board.
On too the problem;
I have the following RAM modules http://www.geilusa.com/proddetail.asp?linenumber=26 , and set into the BIOS SPD off and the timings to 3-4-4-8, and the DDR voltage to 2.6.
Everything works okay, except, SiSoft Sandra and CPU-Z say my RAM modules run at CL2.5 instead of the CL3 I configured in the BIOS.
If I turn on SPD, the modules will be configured to CL2.5 and the rest the same timing. Now I can get into this, since I'm basicly are underclocking these modules atm, so SPD might think 2.5 are better setting for running under 400, but still strikes me odd that whatever I set into the BIOS RAM timing, CPU-Z and Sandra report different timing then what I do in the BIOS.
If I calculate it rightly, underclocking these modules on 400MHz instead of 533 will result in 2.5-6-3-3 timings on 400MHz and 3-8-4-4 on 533. The setting 2.5-6-3-3 works aswell and stable, same as 2-6-3-3, since they 3.5ns modules I didn't have any problems with my timings. Except, that sandra/cpu-z just give not the right timings according to my BIOS.
All dynamic overclock settings in BIOS are set to off/slow.
I'm not trying to overclock just yet, although I did some testing, but setting only DDR RAM frequency's to 500-533 will make the system not even start.
With only FSB OC'ing to 230 on a P4 3.2 I can run stable with my system, anything above willl have odd results, as in, onboard gigabyte network adaptor disappearing, not able to boot from internal promise raid, or core center reporting it doesn't support my mobo! But, that is my 3.2 GHz CPU that is clocked too high then.
Just want to make sure, that whatever I set into BIOS will carry over to the booted system, before I activly will OC.
System spec;
P4 3.2GHz
4x GL5124200DC (Geil)
875P Neo FISR2(PCB 1.0) BIOS v2.0

All right, then I probably don't have to worry about that, thank you for clearing that up.
Nevermind the rest of t he text, I found that AGP 3.0 Univeral mode just runs at 1.5v, which both the mobo + card use atm.
--- obsolete question --
Another question though, it might be related aswell.
I'm using an ATI RADEON 9800XT in this motherboard, that according to ATI will use 0.8volts when in 8x/4x AGP or 1.5 at 4x. Thing is, CoreCenter still reports the AGP voltage as 1.5 while the card is running on a 8x AGP bus (where it should be 0.8v). Is this another quirk where things are not displayed correctly?
Bit concerned here, because having used this card in a previous board, I notice that in this board that the card outputs a stronger signal to the same monitor, resulting in a brighter display. Meaning black is not real black but more a kind of grey, which might be the result of the card running at too high a voltage in 8x mode.
-- obsolete question --

875P Neo-FISR vs. 865PE Neo2-V

Hi, I appreciate any help with this question. I own 2 different MIS motherboards currently and would like to know which would be the better one to use for my system build.
875P Neo-FISR
or
865PE Neo2-V
Specs:
Pentium4 3.2ghz socket 478
2 sticks of PC3200 512mb DDR memory ( kingston Hyperx)
MSI geforce 6600 agp
500watt psu ( XG )
Does it matter what board I use?
Thanks!

875P chipset supports ECC RAM and 865PE/P chipset doesn't.
875P FISR is the 2nd Rev from the predecessor 875P FIS2R and has better support for Prescott CPUs. 865PE Neo2-V is a cutdown version of the predecessor 865PE Neo2 S/LS/FIS2R/PLS/P and has only 2 RAM slots.
To put the 2 for comparsion, I would choose the 875P Neo FISR but if you are not comparing the cutdown version of the 865PE chipset, I would still favour the 865PE chipset.

MSI 875P Neo LSR Dead??

Hi y'all,
Saturday 12th of juli I've bought some components:
- Intel P4 3.0GHz 800MHz FSB
- MSI 875P Neo LSR
- 2*512MB Kingston HyperX PC3200 CL2
- Hercules 3D Prophet 9800 Pro
- Iiyama Vision Master Pro 413
After installing the whole bunch, I tried to boot the system but nothing happend!
So I waited for about 5 min. and booted again. This time almost succesfull but..... the only parts that were working are my fans (casefans, cpu-fan and the Northbridge-fan).
The powerswitch wasn't working (and it was installed correctly). I had to power the system via the powerswitch on my powersupply. So my guess was that my mobo was dead!
After returning the mobo back to my retailler, they concluded that it was dead indeed, so the gave me another mobo.
So after installing the new board, I tried to boot again, but still no succes so far.
My retailer tested the board again and it was also dead.
Some symptoms:
- Active fans
- No HDD, floppy and DVD-player/Burner activity
- Blank screen (display in standby)
- Instant power on when I turn the switch on on my powersupply
I've tried different videocards, memory modules and clearing the C-MOS, bur nothing seems to help ;(
Can you please help me out????
Thanks
Best regards,
Arjan

With regard to the motherboard stand-offs, motherboards dont always use the same amount or in the same position (the stand-offs are movable -either bending out of brackets in the case or unscrewing)
Always check ALL the standoffs line-up with screw positions for your moterboard before fitting, a wrongly positioned post can short-out PCB traces/pins
Another easily overlooked item is the square 4 pin 12v connector (older type power supplys dont even have one), the 12v power connector is located by the northbrige/AGP socket (the CPU will not start without this fitted)
Sometimes when physicaly altering a computer the reset or power-on (start) switchs dont line up correctly with their buttons -this can cause the switch to be permanently "on"
The power-on switch will cause the computer to "cycle" (constant restarting) and the reset switch will cause the computer to hang with-out initialising -try removing the reset switch connector from the motherboard
If none of those are the problem i would suggest trying a different power supply -or maybe your dealer could check the one you are using at the moment

How to disable AGP Fast Write with MSI 875P Neo-FIS2R ??

How can I disable AGP Fast Write with the MSI 875P Neo-FIS2R ? I can't find an option for this in the BIOS !

You wont usually find this option in most MB BIOSES , as the only Option that SOME BIOSES Have is the Option to enable, disable SBA (Side Band Addressing) for the AGP Bus....In order for you to Disable or Enable the FW, You Must have the Option in your Vidio Drivers Controll Panel.....If you have a NVIDIA Card, you Must go to http://www.guru3d.com And Download the program "NVHardpage" and then Open the Program and you wil have the Choice to Enable these options and they will then appear in your Vidio driver CP >> "Activate "Coolbitts" (this is NVIDIAS Overclocking Utility) Activate "Harware Options", and then Activate "AGP Options" and finally Activate "Performance Options"........If you have a ATI Card then you must Download one of thier "Tweeking Utilities".......I will Post the Direct "Link" for NVHardpage in a Minute, just say yes to the Lic. Agree. and download......Here>> http://download.guru3d.com/nvhardpage/ ...........Sean REILLY875

Problem with S-ATA optical drive(MSI 875P Neo)

Ahoy MSIers,
I am in a most dire situation, and before I go to spend money on some computer-tech guy to solve my problem, I thought maybe you could help me.
*My PC specs:
Intel Pentium 4 Northwood C 2800Mhz
MSI 875P Neo
A-DATA 512Mb RAM DDR 400 * 2(1024)
PowerColor Radeon 9800Pro
Western Digital Hard Drive 80Gb 8Mb buffer P-ATA
Pioneer DVR-212D S-ATA (The main issue here)
Bios - AMIBIOS - VERSION 3.31a
Windows XP Pro - SP2
Until 2 days ago I owned an MSI CD(P-ATA) burner which was virtually dead.
2 days ago, It died completely, So I decided that I will not just replace a CD burner for a CD burner... no! I will buy myself a new shiny DVD burner!
So I bought myself a Pioneer DVR-212D(S-ATA) and I went on with installing it.
I plugged the Serial Power Cable from the PSU to the drive, and connected the drive and the S-ATA port on my M-Board with a serial-ata cable.
I booted up, and found that the device was nowhere to be found although power is being transferred to it(the drive opens and closes when pressing it's eject button).
I searched the net and found that I was supposed to "enable" S-ATA in my BIOS.
Tried that, yet every setting I tried besides the default setting gives makes the computer freeze for a few minutes at the MSI logo and then a "friendly" error massage appears, usually it's something like
"4th master drive ATAPI incompatible" ( the number changes, I haven't got a clue why).
Searched the net a bit more and found almost nothing... most s-ata "problems" were about booting from a s-ata hard drive....
I am getting desperate, So in order to maximize the chances of me getting help solving this issue, I took a few pictures of the BIOS and the inside of my case... maybe it will help, I dunno.
Here are some pics:
The S-ATA cable connected to the Mother-Board
Back of the DVD burner with the S-ATA cable attached
BIOS - standard CMOS features
BIOS - Integrated Peripherals
On-Chip IDE configuration
P.S
I have a DVD ROM(Toshiba, nothing special) and I would of course occasionally like to burn Dvds/Cd's from my DVD ROM to my DVD burner. However, seeing as the DVD burner is S-ATA, there is no physical connection what so ever between the two drives(unlike in P-ATA connection where each cable has 3 "connections", 2 for drives(hard or optical) and one for the Motherboard) I really don't know how I can "achieve" this.

A friend of my father's, whose occupation is a computer technician toke a look at the PC and bios settings today.
WE tried EVERYTHING and It still wouldn't work so we concluded that the problem is probably in the hardware.
There were two possible "suspects" here - The Mother Board(specificially the S-ATA controller/ports on it) or the drive itself.
We connected the drive to my sister's computer and it worked like a charm.
So the answer was clear - something was wrong with the board.
I replaced my S-ATA drive for an IDE drive, and all is well.
Well
that's the end of that story

For 875P Neo-FISR Sandra reports DIMM 1 "Empty" -- 512 chip not showing up

About 2 months ago, I assembled an 875P Neo-FISR with an Intel P4 3.20E GHz 1MB L2cache and 800 MHz FSB. I installed 2 Kingston KVR400X64C3A 512MB PC3200 CL3 184 pin DIMMS, one in slot 1 and the other in slot 3 so as to get dual channel mode. The system reported that I only had 512MB memory. I tried reseating the DIMMS several times with the same result. I then moved the two DIMMS to slots 2 and 4, after which the system reported 1GB RAM, and the dual channel mode appeared to be in effect.
Today, I purchased two more identical DIMMS (PC3200 512MB, same mfctr and model #) and inserted them into slots 1 and 3 for a total of 4 512MB DIMMS. The system reports that I have 1.5MB RAM, and Sandra reports that slot 1 is "empty."
I'm not happy.
I'm running a new copy of XP Pro, which came with Service Pack 2 installed. I have a variety of peripherals, WD IDE drives, ATI video card, etc. -- none of which should have anything to do with this. The original problem appeared at the most basic level of installation.

If the slot was dead two months ago it wouldn't get any better with time.
If you use only slot one does it work?

Need help with msi 875p neo

i just bought one of these and set up my system, but as soon as i flick the power switch on the psu there is a 2 sec delay then it automaticaly boots up without me pushing anything then it just hangs..nothing no boot screen nothing. i check that d brakect thing and it says "Inializing keyboard controller" it stays there and does not change.
my system spec:
msi 875P Neo-FIS2R
intel Pentium 4 3.0GHz 800MHz Fsb
2 x 256 mb pc-3200 OCZ EL-DDR cas 2 @ DDR400
thermal take spark 7
leadtek winfast A280leTD 'Geforce 4 Ti 4200'
WD raptor 36.7 GB SATA 1
Xaser III casing
Thermaltake Purepower 480W
MS intellieye Explorer
plz help me i find no reason for it no to work

Quote
Originally posted by MaKoMaN
thaks for all ur help i found the problem one of my memory sticks had a scratch the other one works fine.. but now what do i do with the scratched one?
did you make the scratch? if not, you got warranty on it that would get you a new one...

Probems with msi 875p neo Fis2r and network controller driver

Hi guys just wondering if anyone could help me with my msi 875p neo FIS2R and problems with the network controller driver/network card.
I'm running xp on a computer my nextdoor neighbour gave me. I got it working fine with service pack 3 installed but then installed a bunch of windows updates last night and the computer would switch itself off before windows could start. Now I reinstalled xp and unfortunately it does not recognise the network controller/card at all now. I tried installing the intel network controller drivers but it stopped because it said no intel adapter/card was installed/present. Could anyone please help with suggestions? I tried running everest and under newtwork it doesnt list intel network adapters but I'm pretty certain it is. Again any suggestions?
--------[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]
Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2800 MHz (14 x 200)
Motherboard Name MSI 875P Neo-FIS2R (MS-6758) (5 PCI, 1 AGP, 4 DDR DIMM, Audio, Gigabit LAN, IEEE-1394)
Motherboard Chipset Intel Canterwood i875P
System Memory 1024 MB (PC3200 DDR SDRAM)
BIOS Type AMI (10/11/04)
Partitions:
C: (NTFS) 238464 MB (200326 MB free)
--------[ DMI ]---------------------------------------------------------------------------------------------------------
[ BIOS ]
BIOS Properties:
Vendor American Megatrends Inc.
Version V2.4
Release Date 10/11/2004
Size 512 KB
Boot Devices Floppy Disk, Hard Disk, CD-ROM, ATAPI ZIP, LS-120
Capabilities Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS
Supported Standards DMI, APM, ACPI, ESCD, PnP
Expansion Capabilities ISA, PCI, AGP, USB
[ System ]
System Properties:
Manufacturer MICRO-STAR INC.
Product MS-6758
Version 00C
Serial Number 00000000
Wake-Up Type Modem Ring
[ Motherboard ]
Motherboard Properties:
Manufacturer MICRO-STAR INC.
Product MS-6758
Version 00C
Serial Number 00000000
[ Processors / Intel(R) Pentium(R) 4 Processor ]
Processor Properties:
Manufacturer Intel
Version Intel(R) Pentium(R) 4 Processor
External Clock 200 MHz
Maximum Clock 4000 MHz
Current Clock 2800 MHz
Type Central Processor
Voltage 3.3 V, 2.9 V
Status Enabled
Socket Designation FC-478
Network adapters:
Direct Parallel 5.1.2535.0
WAN Miniport (IP) 5.1.2535.0
WAN Miniport (IP) - Packet Scheduler Miniport 5.1.2535.0
WAN Miniport (L2TP) 5.1.2535.0
WAN Miniport (PPPOE) 5.1.2535.0
WAN Miniport (PPTP) 5.1.2535.0

Quote from: Jack t.N. on 14-November-09, 08:00:05
Clear CMOS with your PSU unplugged from A/C power. Then load "Optimized Defaults" in BIOS and retest.
thanks jimi... jack
will try that and post later if it worked... ive never cleared cmos, this sort of thing is relatively new to me but thanks again

MSI 875P NEO FIS2R AGP problems

I have just purchased an MSI 875P NEO FIS2R motherboard and there is a sticker covering the AGP slot which says "Please use only 1.5V AGP cards to avoid pernament damage to this mainboard". However, on the website it says here http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=434
"One AGP slot supports 8x/4x at 0.8V (AGP 3.0) or 4x at 1.5V
(3.3V is not supported)." I want to use 8x agp @ 0.8v and the website says this ok but the sticker on the AGP slot on the motherboard says only 1.5V. Is this a mistake on the website or on the Motherboard and is it possible for me to use 8x AGP @ 0.8V without damaging the motherboard?
I want to use an ATI radeon 9800pro.
Anybody using 8x agp @ 0.8V and have they have any problems?

Assaf IS THE MAN!! His answers are NEVER WRONG.. WORRY NO MORE about the voltage...

MSI 875P NEO FISR ( pcb 2.0) OVERCLOCKING database

Similar Messages

Maybe you are looking for