Msi 8800gts 640oc-using the supplied disk to load drivers and utilities

Greetings,  I purchased a NX8800gts-T2d640e-hd oc. Should I auto run the provided disk or select certain utilities off the disk and download the latest nv driver 97.94 for XPSp2. The retail disk has driver 97.25. Which utilities should I use? I am not familiar with MSI utilities and I do not want to guess at what to load. Thanks.

Quote from: BOSSKILLER on 12-April-07, 04:40:56
use latest drivers from Nvidia, e.g. 97.94
Will do cap'n:cheesy:

Similar Messages

  • GT60 - Can I break RAID0 and then use the Recovery disks?

    Is it possible to break the RAID0 and then use the recovery disks from MSI Burn Recovery or a Windows Home Premium Disk with the code from the sticker on my laptop,  to install back to factory settings without the RAID0? Just want to make sure before I do something drastic. Thank you.

    you can always make an system image of your current windows on an external drive and then experiment with it and if anything breaks, just change bios settings to older ones and recover your older system, everything will be intact like nothing ever happened.

  • How do i use the recovery disks and backup and restore my laptop in a new HDD without losing OS lic?

    I am running a HP-DV6 6090ee laptop with windows 7 Home Premium 64bit OS. This problem started from last evening.
    I am getting a "Smart Hard disc error" error message before boot and ater booting windows saying that my HDD is having problems and i need to backup and check the hdd.
    After checking i found that i have a corrupted hdd and i am going to replace with a new one.
    I need to know the following :
    > How do i restore my windows license and my antivirus license in the new hdd?
    > i dont currently have a OEM HP OS cd. can i use any windows 7 cd??
    > at what stage should i use the recovery disk i created from the recovery partition be used? Whats its specific use?
    I really appreciate any quick response as my current HDD is running out of life.
    Regards
    A

    See these 2 Links...
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991

  • Can I use the install disk on two computers?

    I haven't actually installed it on my computer yet, I just allowed whatever was going to install itself to come up. If I have another computer, can I use the install disk to put OSX on there or not? If so, can I still use it in case I need a backup load of my computer?

    Only if you get a family pack license newer than the installer disk which came with the computer(s) can you install it on multiple computers. Check your license agreement.
    You can't use the disks which came with another computer on a second computer. These articles explain more along those lines:
    http://docs.info.apple.com/article.html?artnum=25517
    http://docs.info.apple.com/article.html?artnum=25784
    As for backup, I recommend looking at these various procedures:
    http://www.macmaps.com/backup.html
    Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

  • I think my hard drive crashed. How can I get data off via firewire before the HD completely goes? I was stuck on the BSoD and now I can't even use the install disk. Utility Disk said HD was okay. Please HELP ME

    Safe mode did nothing.
    Safe mode with verbose seemed to make it worse.
    Before continuously trying new things, I could use the install disk to check the disk utility and clear
    the hard drive from there but now the screen won't even load to that.
    I really need the data on the hard drive especially if it can't be salvaged.
    How can i transfer files?
    Am I better off physically taking my HD out or will it damage itself without
    leaving the system.
    I tried command r
    resetting the pram
    safe mode
    jumping out a window
    nothing has helped.
    I am stuck on the blue screen of death and it flickers.

    No. In order to use FireWire Target Disk Mode you need to use a FireWire equipped Mac. Other than that the only other way I can think of to even attempt to access you files would be to remove your hard drive and install it in a case and connect it to another computer.
    Have you run the Apple Hardware Test? http://support.apple.com/kb/HT1509

  • How can i reformat my harddrive using the recovery disk stored in partition drive?

    hi guys! i need help. i need to reformat my harddrive and i will do this for the first time. however, i was not ablt to make the recovery disk since i purchased the tx2 1275dx laptop last july 2009. what i have is a recovery disk stored in a partition harddrive. how can i reformat my cpmputer using the recovery disk in partition harddrive? my OS is windows vista.  thank you...  

    Hi,
    Shutdown the notebook.  Tap away at f11 as you start to access Recovery Manager which you can then use to reinstall the Operating System.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Satellite L500-19X - Can't use the recovery disk

    Well I got this laptop two days ago and used it once after installing fire fox and my mobile broadband drvier's and going back home to boot up and find it was going to happen,
    I had tried safe mode (all three) and repair and all I got was a black screen with the cursor up where there should have been a language screen (I used the recovery disk that came along with the laptop) so anyway after finding out I wasnt going to be able to repair it I tried to install but of course that didn't work either so I put my XP 64 bit OS on and worked perfectly fine, then I upgraded (using my own upgrade windows 7) and that works fine no problems, so I tried again with the original windows 7 that came pre-installed on the laptop's hard drive and all went find untill it starts installing driver's or updates (I'm not 100% sure on this but it is at and/or after the face recognition installation,
    Then it shuts it's self down and boots back up to automatically restart and asking me if I want to repair due to a bad start-up so I do the repair boots back up and still says I need to repair and finds nothing wrong and carrys on in that circle.
    Now I have been told that it could be the register or it is a graphics problem, I myself am getting pretty fed up of having to install/reinstall/format this laptop.
    So if there is anyone who know's what is wrong or what to do or even if it needs to be sent back to be fixed that will be very helpful.
    I thank anyone in advance.
    Happy new year :)

    Hi
    Well, I think its really hard to say what the reason is. Maybe the recovery disk is scratchy or the files corrupt there.
    At the moment I cant imagine that its a hardware problem because other Windows disk working properly.
    In your case I would try to install Windows 7 from a Microsoft disk and then see what happens. If it works properly and you can install all drivers & tools you should order a new recovery disk from Toshiba directly.
    Bye

  • Satellite A300-1mz Can I use the recovery disks after a HDD upgrade?

    I'm upgrading the hard drive of my *toshiba a300-1mz*, but I'd be sure that I can use the *recovery disks* maked at the first boots for the s.o. (vista)
    I expect your support...
    thank you very much...

    > how can I be sure that the disk is properly recognized before I buy it???
    What do you mean exactly? Did you mean the HDD???
    The A300 supports and 2.5 SATA HDD and all 2.5 HDD should be recognized properly since the SATA HDD controller hasnt any limitations.
    Bye

  • Blue Checkered Screen after using the Recovery Disks

    I have a Compaq Presario SR2034NX XP Media Center computer. I followed the instructions and installed all the recovery disks. The screen then said to remove all disks and that it's going to reboot several times to finish the installation. During this process I got a blue checkered screen. I'm not sure what to do at this point. I took a picture of what the screen looks like and I'm enclosing a link to the picture here. 
    Click below to see the picture of what my screen looks like after using the restore disks:
    http://bit.ly/ifajT6
    Thank you for your help and time!

    I run into the same problem with fresh installation of W7 Pro on T530 with 1TB samsung disk.
    This solution worked for me:
        Running check for updates will trigger this error message:
    “Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer.”  
    Solution:
    1.    Go to Administrative Tools/Services, and stop the Windows Update service.
    2.    Then go to the folder c: /Windows/SoftwareDistribution and delete all of the files and folders.
    3.    Then go back to Services and restart the Windows Update service which will recreate all of those folders again.
    4.    Then manually run the Update Service and everything should work.

  • HT3275 My back ups are failing, the message I receive is "The backup disk image "/Volumes/Mamma and Pappa's Time Caps-1/Liz Giusti's MacBook Pro.sparsebundle" is already in use. Any suggestions

    My back ups are failing, the message I receive is "The backup disk image "/Volumes/Mamma and Pappa's Time Caps-1/Liz Giusti’s MacBook Pro.sparsebundle” is already in use. Any suggestions?
    I am trying to back up my Macbook Pro to a time capsule attached to my iMac. When I first installed the Time Capsule, all backups went well.

    Reboot the TC.. it has got lost.. or reboot the whole network.. restart in correct order. .modem router.. TC.. clients.
    It suddenly will reappear.. you might need to reboot it again in a few days. .such is apple software today.
    Some more info C12. http://pondini.org/TM/Troubleshooting.html

  • Using the Remote Disk the first time - didn't work!

    I wanted to install SL on my MBA using the Remote Disk feature, went through all the steps on my iMac where the SL disk was loaded, and all the steps on the MBA.
    Everything was going fine until I was asked, on the MBA, to give the password of the network I wanted to join. Well no dice! It just refused it. I tried it numerous times but it kept on refusing it. The password was of course always the correct one.
    Anybody know what could be going on? Thanks!

    Turning off security on the router did the trick. Thanks!
    What I'm now wondering is why Apple, unfortunately did not address this in the instructions of "To use Remote Install Mac OS X" page 46 of the User's Guide:
    http://manuals.info.apple.com/enUS/MacBook_Air_Late2008UserGuide.pdf
    Would've saved a lot of people a lot of problems!

  • I am using OS X and am trying to set up a HP ENVY 5660 e printer and the drivers are not listed.  I read somewhere not to use the install disk.  What do I do?

    I am using OS X and am trying to set up a HP ENVY 5660 e printer and the drivers are not listed.  I read somewhere not to use the install disk.  What do I do?

    Your suggestion was a good one and what I found was that to use this and any other printer I looked at is that I need to update the operating system to a later version.  I have been reluctant in the past to do this after reading update horror stories and since this computer does what I need and very well.  Was glad I moved over from windows and this is the first problem I have had.  Thanks for your help and any other suggestions you may have.

  • Using the Recovery Disk

    Hi,
    I have a Toshiba Satellite Model: A135-S4527.  My computer has been crashing randomly, and I am looking to re-install the factory image.  However, my DVD drive is broken, and thus, I cannot use the recovery disk directly.  I tried to buy an external USB DVD drive, but the recovery disk does not seem to be able to work using the external DVD drive,  When I try to re-install with the disk in the external DVD drive, it keeps asking me to insert a disk into the internal DVD drive (D, even though the internal drive does not work anymore.  Does anyone know if there's any way I can reinstall the factory image with an external DVD drive, or other method?  Thanks for the help!
    -Henry

    henry2304 wrote:
    Hi,
    I have a Toshiba Satellite Model: A135-S4527.  My computer has been crashing randomly, and I am looking to re-install the factory image.  However, my DVD drive is broken, and thus, I cannot use the recovery disk directly.  I tried to buy an external USB DVD drive, but the recovery disk does not seem to be able to work using the external DVD drive,  When I try to re-install with the disk in the external DVD drive, it keeps asking me to insert a disk into the internal DVD drive (D, even though the internal drive does not work anymore.  Does anyone know if there's any way I can reinstall the factory image with an external DVD drive, or other method?  Thanks for the help!
    -Henry
    The Toshiba recovery disk requires the internal CD/DVD drive.  There isn't any workaround for that.
    Sorry.

  • Using the TimeCapsule disk without internet

    Hi!
    We have a wireless setup with the main provider being an Airport Extreme (connected to the router) and and Airport Express (n) that extends the signal. We have however also a 1TB timecapsule directly connected to two different macs. Can we use the Timecapsule disk without being connected to the wireless spot (airport extreme). In some cases the Airport Extreme goes down and doing so it also drags the TC downs with it. We just want to use the TC as a shared disk connected to two/three computers via the ethernet ports on the TC. How can we do this? When we turn of the wireless the TC disk does not show up and the TC goes yellow...Im posting a screenshot (Norwegian). Hope someone understands what we are trying to achieve:
    http://bildr.no/view/311772
    Many thanks in advance!
    Tom - Norway

    I think you can just go to the wireless tab and turn it off in wireless mode. It should continue to work fine over ethernet. You won't be able to control it from a wireless computer then unless you have the ethernet tied to one of your other ports.
    Here's what I would do. Set up the TC in "bridge" mode. This way, all ports then become ethernet switch ports (no WAN-LAN) function. Turn the wifi off. Then connect an ethernet cable from the Airport Extreme BS to the TC. Then you'll be able to see the TC from any wireless connected computer but if the WiFi network goes down then you'll be OK.

  • Anyone clean their mac using the disk utility using the repair disk permissions??

    anyone clean their mac using the disk utility using the repair disk permissions??

    No. Threads don't hurt anything. If your computer is not functioning properly perhaps you need to try some basic maintenance. Let's start by having you do this:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Next, try booting into Safe Mode then immediately restart normally. Safe mode is going to take a while so be patient. It's slow.
    Next, create a new user account. Log out of your account then log into the new account. Try using iPhoto and the publishing button. Do they work now?
    If you still have a problem, then do the following. If you don't want to go through the above then just start with the following and forget the others above.
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

Maybe you are looking for