MSI 880GM-E41 problem

Hello,
I tried to turn on PC,but led of APS blinking and PC can't turn on.I tried everything remove all hardware except procesor,but it blinks.I can't recognize is this PSU or CPU problem?
P.S sorry for my English.

Quote from: Dexas on 24-June-13, 17:59:56
Hello,
I tried to turn on PC,but led of APS blinking and PC can't turn on.I tried everything remove all hardware except procesor,but it blinks.I can't recognize is this PSU or CPU problem?
P.S sorry for my English.
CPU: AMD Athlon X3 445
MB: MSI 880GM - E41
RAM : Kingston 2x2GB
VGA: Intergrated
HDD: Seagate ST3500418AS 500GB
PSU: FSP 400W
OC: no OC
OS: Windows 8

Similar Messages

Random Shut Down on a MSI 880GM-E41

System under discussion
AMD Athlon II x3 450 Regor 3.2 Ghz
MSI 880GM-E41 mainboard
Kingston DDR3 Hyperx/fb 2x2Gb
Seagate Baracuda 160Gb IDE HD
Logisys 480w Power supply
USB mouse
corded keyboard
using onboard video by ATI
I used the search to find random reset posts but they all seemed to be 10 years old.. and none marked solved so here is a fresh question for old timers on the MSI board.
This random shutdown (as described in those old posts) happens with no load on the system except for my always on net connection which does exchange some data.
This MSI board was a (unknown to me at the time) discontinued item from New Egg. It works ok most of the time so I was wondering if there is some software cycle that kicks in. I have no screen savers on or anything else I know of. A defrag monitor is loaded and I use the Comodo firewall system. That's it-- nothing else to tell of interest.

You already have a topic for your issue, no need for another (https://forum-en.msi.com/index.php?topic=160956.msg1179710#msg1179710) . Besides this board is not ten years old. "Similar issues" that old are irrelevant.
-- TOPIC LOCKED --

MSI 880GM-E41

I need information about my mainboard i wont upgrade(bay) the procesor Phenom II X6 1055T L3 9mb 125w On msi site dont have that cpu on cpu suport so i want some information can i put that procesor.
MSI 880GM-E41

I don't think it will support that one since it's not on the list. You can always check with MSI: >>How to contact MSI<<
You should be able to find the 95W version available to buy though, so that's the alternative.

Sound issue with my msi 880gm-e41 mainboard

please help me to solve the problem as follows----------i have 5.1 speaker system and the sound is good at a medium sound range from my pc sound control,but when i increase the sound the song tends to stop and play randomly,i dont have such type of problem in my previous gigabyte mobo.and the most funny thing is if i unplug the red jack which is connected for middle and sub woofer sound the sound is ok for the remaining four speaker,please help me to solve the problem ,i have already checked many times as the via hd audio has been installed perfectly or not....................

ok here are my PC configuration:
amd phenomIx4-955 BE processor,
msi 88o-gm-e41 mainboard.
2x2gb 1333 bus team&e-lite ram,
220 gt 1gb gpu,
500 gb seagate harddisk,
win7 64 bit ultimate os,
logitech keyboard mouse
delux-sh496 casing with psu
viewsonic 17 inch lcd monitor
via build in sound card,
5.1 logitech soundbox

MSI 880GMS-E41 support UEFI?

I was looking around on Newegg for a new motherboard with some type of rebate, and saw: http://www.newegg.com/Product/Product.aspx?Item=N82E16813130652&name=AMD-Motherboards
Which looks pretty good. I happen to have a 3TB SATA drive though, and from my understanding; I can't use all 3TB of this HDD as one partition unless the partitioning scheme is GPT. And it turns out Windows will only boot from GPT drives if it was installed in UEFI mode.
So, did that motherboard happen to support UEFI? Looking around the internet didn't exactly show that it did, but I'd rather be sure.

from some searching it has a basic AMI BIOS not a UEFI! so it wont allow 3TB GPT partition boot!
if your looking to do a single large drive look for a MSI board that has 3TB+ infinity on it as they are designed for that specifically!

Problem 880gm-e41 and corsair 1600

Hi to everybody. I just bought a new 880gm-e41 and 6gb (3x2)gb, code name cmx6gx3m3a1600c9.
The problem is that sometimes when i switch off the pc it does not starts again until i not remove a module of ram.
I have made the last bios update and the problem still exists.
The rams did not give me some error with testing softwares.
What can i do more?
Please help :(
Many regards

See this FAQ: https://forum-en.msi.com/faq/article/amd64-and-memory-explained

880GM-E41 and Server 2008 / Windows Home Server 2011

I am building a WHS 2011 machine (which is based on Server 2008) and am considering the 880GM-E41 mainboard. However when I go to the product website:
http://www.msi.com/product/mb/880GM-E41.html
I don't see drivers listed for Server 2008. Specifically, there are chipset, audio, raid (etc) drivers listed for Windows 7 64-bit, but nothing for Windows Server 2008. However in the past I have experienced mainboards which 'just work' regardless of the drivers that are downloadable. My question is... before I purchase this mainboard, does anybody know if the motherboard works on Windows Server 2008? Or which devices/features will not work?
I actually don't require the RAID drivers to work since I won't be using hardware raid, but I will need the system, chipset, and audio drivers working (whether they get pulled from Windows Update or downloaded from MSI).
Thanks!

WHS 2011 is built on the Windows Server 2008 R2 code base, which is built on Windows NT 6.1, the same core operating system used with the end-user oriented Windows 7. So basically, you need to use Windows 7 64bit drivers and everything will be fine.

880GM-E41 And Amd Phenom 840

I am thinking about ordering a http://www.msi.com/product/mb/880GM-E41.html and a AMD phenom II 840(HDX840WFGMBOX) but the 880GM-E41 does not list it under supported cpus but since the 840 a propus die would it work ? will msi release a bios update for proper ID

I have the same CPU in my 890FX-GD70 board, and it works fine and is recognised correctly, despite also not being on the supported list for my board. Should also work in yours too.

Does 880GM-E41 support Wake-On-Lan?

I've been through the manual at 880GM-E41:
http://www.msi.com/product/mb/880GM-E41.html
But it makes no mention of supporting Wake-On-Lan. It shows a BIOS picture and support for all other type of wakes, but not Wake-On-Lan. A search of the internet gives inconclusive evidence.
Any feedback appreciated!
Thanks!

Modern mainboards do not have a specific 'Wake on LAN' option in the BIOS.
Most recent MSI boards, including yours, use an integrated Realtek PCI-E network controller. So in BIOS, you need to enable 'Wake on PCI-E', and then configure the driver properties for the network controller in Windows.

MSI 880gm-e43 ddr3 1600 support

I recently purchased this motherboard (msi 880gm-e43), and Kingston HyperX 4GB KHX1600C9AD3K2/4G ram kit. However while both are supposed to support DDR3 1600MHz, I only get 1333 with the default configuration.
Do I need to change overclocking settings to get these working? If so how can I do that?
(Btw, SPD shows up to 1333 only, while MSI's control panel applications also has another entry for XMP-1600, which I do not exactly know how it differs).

I though I was able to do it. There was a simple option, which allowed 1600MHz with no issues.
But it turns out that mode comes with increasing DRAM timers. Is there a way to increase the clock speed, while keeping the timers fixed?
(I compared Windows Experience Index scores, it performs exactly the same in both those configurations).
There is this page, but it has no documentation, and I have no idea how to set it up:

Msi ti 4200 problems

i installed a msi 4200 agp video card today and have had nothing but problems. on the first boot xp did not try to install new hardware. In the display properties it did not recognize the video adapter. i tried to intsall the drivers from the installation cd but it said it was not the right files and did not recognize the path. on the second reboot no picture after windows boots. i have a gigabyte mb ga-7vrxp and am upgrading from a pci video card. any help would be much appreciated.

Thatz Y... I won't switched to XP until it has really settle down...
lambethduke, I know where you've got things wrong and its a common mistake as I have accidentally did it myself before ... You must have direct right click on your Display adapter driver and un-install... This will cause the screen to go blank during startup whenever you wanna install the drivers again, though you may be able to see part of the windows starting up... Next time, juz un-install the driver by double clicking on the driver and inside the profile click on un-install and this problem will never exist to you anymore...
All the Best... :D!!!

MSI G4Ti-4200 problem

Hey all, hope you can help me out.
Having some major problems with installing the Ti4200 64 card on my system. My system continually crashes with it and no games or programs run for very long, freezing or just not loading, due to lack of virtual memory.
I've downloaded the latest patch for my motherboard and graphics card so its not that. Might be the psu as its only 300w so I'm looking into upgrading that. Could there be a prob with the motherboard, memory or psu. I can't afford to upgrade all of them so is there a way of finding out which one it could be.
System:
Win 98
Athlon Thunderbird 1.1
FIC AZ11 motherboard
765 crucial sdram pc133 (1 x 256 and 1 x 512)
Maxtor Plus8 IDE 40 gig Hard Drive
MSI G4 Ti4200 td-64
Creative SB Live!
Liteon dvd
300w psu

hi again,
here are the specs for my psu.
+3.3v - 15A
+5v - 35A
+12v - 10A
-5v - 0.5A
-12v - 0.5A
I've since flashed my motherboard with the latest bios, probably not the wisest thing to do in hindsight as now nothing happens at all with the msi agp card so i'm running off my pci voodoo 3 2000 now. As far as the cmos is concerned, its got all the same settings as before and now i'm totally confused. I'm guessing a new psu is the order of the day.

MSI X48C Platinum problem

i have a MSI X48C Platinum
Ram: OCZ PC3-12800 Gold RAM - 4GB, 2x2GB, 1600MHz, DDR3, Low Voltage, Dual Channel
Processor: Intel Pentium D 915 2.80GHz / 4MB Cache / 800MHz FSB / Dual-Core /
PSU: thermaltake 420w
Problem: i turn the computer on it sounds like its going to start up then turns off for 5 seconds then comes back on and dose the same thing over and over. if i hit the button on the back of the motherboard it will boot and say CMOS Settings Wrong, CMOS Date/Time Not Set, Press F1 to Run Setup Press F2 to load default values and continue if i click f1 it will go in to bios and if i click f2 it will load windows.
any help??

Quote
sorry i dont know what you mean when you say amperage limits (A) on the +12V voltage rails
Look on the PSU sticker. And write down the numbers.
Quote
ok i got it to boot but it dose the same thing
Did you do this?
Quote
Manually set the memory clock speed to DDR3-1066 for testing and see what happens.

MSI R9 280x problems

Hello i have just gotten a new MSI R9 280x with building a new pc, when i installed all the drivers part from the GPU ones everything was fine, but when i installed the GPU drivers it started to crash such as "Display has crashed and restored" and sometimes it would just come up with a blue screen saying 0x00000116 error.
Now i was thinking its my GPU drivers so i try to install the newest ones and that does not work, still have the same problem
I also tried installing new motherboard drivers and bio's drivers and still nothing. So i would want to know is my GPU broken or my motherboard because everything for my motherboard has been working fine and as soon as i install GPU drivers i start having problems. I have tried to use the integrated graphics and that was working fine (This was when i took the GPU out my pc) with all the drivers for that working fine
PLease help me because i really dont know what to do
I have a MSI R9 280x
Z97-GD65 GAMING motherboard
i5
Pleas help Robert

Hi,
Can you provide us with more info regarding your system, see posting guide: https://forum-en.msi.com/index.php?topic=38822.0

MSI TD512EH installation problem

Hi, I got the TD512EH V116 Ver 2.1 512MB MSI Video card - PCI Express, Nvidia 8400GS based, and installed it in my Windows XP SP3 machine (Pentium D 3.4Ghz, 3GB Ram). The card only works as a basic VGA Card (when I connect a monitor to it, it displays windows but the video is extremely slow, even simple page browsing in Firefox, are slower than when using the bult in intel graphics of the mainboard, which I Switched off in bios before inserting the card). When I go to Hardware device manager in XP there is a ! next to the 8400GS Card, even tough I installed the latest device driver from here:
http://www.msi.com/product/vga/NX8400GS-TD512EH.html#/?div=Driver
I tried updating the driver, both from Windows update (it says it can't find a better driver than the one I have installed) and manually pointing windows to the folder of the MSI driver files directly; it says it takes it but after everything finishes the exclamation mark (and the problem) remains. There are no other video cards listed under "Display Adapters". I also tried manual scan for hardware changes. I have no other Video cards in the system (nor other PCI Cards at all, in fact).
Attached are screenshots of device manager screens- in the driver instance ID the last few characters (cropped) are &0&0008. The "File details" window shows all the driver files as ok with a green checkmark.
The screenshots:
http://tinyurl.com/msividprob
or if the above link doesn't work: http://img18.imageshack.us/img18/1987/pciexpresscardnotrecogn.jpg
The General tab says "This device cannot start. (Code 10). "
The Resources tab is saying "The device isn't using any resources because it has a problem". (If its not using any resources how does it display basic VGA functionality even? I know its not the onboard Video card because it is not connected to the monitor). Roll back says of course "no previous driver" because I didn't install any other versions.
many thanks in any assistance in solving this thorny problem.
MSI Video Card Model: TD512EH V116 Ver 2.1,
Firmware: NV116 MS111
Driver: Nvidia_258.96_XP
Motherboard: Intel D945GNT (latest bios update installed-NT94510J.86A.4131.EB).
Running Windows XP Pro SP3 in admin account. Pentium D 3.4GHZ, 3GB RAM.

News from the front line: after installing and uninstalling video drivers a few more times, I found a file, c:\windows\system32\ati2evxx.dll that refused to be deleted (Access denied) even when there are no ATI cards (nor any other external video cards, I removed them) in the system- Driver sweeper detected this file but couldn't remove it. I used MoveOnBoot to remove it, and now I get a spooky error thus:
***User Environment. Windows cannot load User's Profile but has logged on
with the default profile of the system. Detail, The process cannot access the
file because is being used by an other process***
But my account environment seems to load otherwise with all the icons start up apps etc. Anyway the somewhat good news is that now, when I go to safe mode, the ! code 10 error in device manager no longer shows, only when booting regularly. Any thoughts? the onboard graphics are Intel 82945G express, and now in regular boot the device manager error for the video driver is different: "Windows cannot initialize the device driver for this hardware" (code 37). When I try to do a driver update and point it to the original intel CD that comes with the system it says "could not find a better match".
Thanks..
Thanks

MSI 880GM-E41 problem

Similar Messages

Maybe you are looking for