MSI 890FXA-GD70 & SLI two gtx 460 1Gb ???

can i install(TWO CARD) MSI Cyclone GeForce GTX 460 1GB GDDR5 SLI on :
( MSI 890FXA-GD70 Mainboard), (Win7 64Bit ) CPU (AMD Phenom(TM) II X6 1090T Processor (6C, 3.62GHz, 2GHz IMC, 6x 512kB L2, 6MB L3) to allows 3 or 4 DVI monitors to be used in Eyefinity without needing a DisplayPort monitor or active adapter ???? to play microsoft flight simulator X for example on 3 LCD ???

Also Eyefinity is AMD feature, Nvidia cards doesn't have such.
Read more about it at: http://www.amd.com/us/products/technologies/amd-eyefinity-technology/Pages/eyefinity.aspx
And yes, SLI isn't possible as Bas mention.
To run SLI you need latest MSI's AMD platform board for AM3+, named 990FXA-GD80:
http://bg.msi.com/product/mb/990FXA-GD80.html#?div=Basic

Similar Messages

Oh Gosh,,,, MSI 890FXA-GD70 4 x 5830,, Was working fine,,, out of nowhere KABOOM

No it didn't blow up but now I can only get two cards working on this board. I have tested it on another power supply.
Am I missing something that isn't allowing me to use all the lanes? It was working fine under windows 7 x64 for a while until it crashed and wouldn't show all cards after boot up...
Has anyone had a similar problem?
I am still under warranty and have initiated an RMA but really don't want to go without the board for 2+ weeks.

Board: MSI 890FXA-GD70
Bios: Version = Newest
VGA: 4 x undervolted 5830 AMD GPU's..... 900 engine 260mhz memory each card.
PSU: Coolmax 1000 watt, Modular Single rail PSU (Also tested on a Corsair TX750)
CPU: AMD Athlon x2 250 @ 3ghz
MEM: 1gb Kingston DDR3 1333mhz
HDD: 80gb WD Sata2 Drive
COOLER: Stock
OC: none of cpu or memory.... GPU ONLY
OS: Windows 7 64bit Home Premium
I have numerous 890FXA-GD70 boards and they can run 4 or 5 cards without issue.... 5 cards when using the 1x slot with a PCIE 1x to 16x Riser cable.
The rig in question has Identical Sapphire Xtreme 5830's.... After a BSOD (unknown) when windows rebooted the cards were missing from device manager.. Tried changing the order or even running 3 cards instead of 4... All these GPU's have been tested in a different machine... They all work fine.
All extras in the bios have been turned off, eg. Sound, Lan controllers and so on...
Bios updated default settings set.... I even tried seating the cards differently in to the board....

MSI 890FXA-GD70 sleep mode

Hello All
My new setup has been running fine for 2 weeks now, there is just one thing that annoys me:
Whenever i put the system into sleep mode, the coolingfan of the GFX card will start spinning at max rpm (and won't stop!)
Besides this the sleepmode seems to be working fine, also waking the machine up again goes ok.
Have tried to change some settings in the bios but until now with no luck.
OS: Windows 7 64 Premium (NL)
using latest bios (1.6) for the MSI 890FXA-GD70
videocard MSI N250GTS-2D1G with bios 62.92.7D.00.11
Have selected following Energy items in the bios:
ACPI: enabled
ACPI state: S1
Eup2013: disabled
For the rest of my specs see signature...
Anyone some ideas how to solve this ?
Thanks!

Similar symptom, different components, but similar solution. I jumped the gun and reinstalled the OS, and video drivers, etc... I suspected it was a driver issue, but only after I formated and started over. With only one BFG GTX 275oc in, it never happened, but with the 2nd one in, and SLI enabled, the monitor would go black at random times, though the computer was still running, and I could tell it to shut down without having to pull the plug.
Glendor...
=====================
MSI 890FXA-GD70 (1.6 bios)
AMD 6x 1055T Thubian (3.5ghz OC)
Corsair H50 cooler (push, shroud, rad, pull = 27c/42c)
2 x 4gb Ripjaw DDR3 (1333)
2 x 250gb Momentus XT (RAID0)
2 x BFG GTX275oc (SLI enabled)
Muskin Enhanced 550w PSU

MSI 890FXA-GD70 w/ 2xIntel 510 120GB in RAID 0 on Locks up and BSOD

I am getting hard lockups and BSOD from the following
OS: Win7x64
MB: MSI 890FXA-GD70 w/ latest BIOS
CPU: AMD Phenom II X6 1100T
HD: 2xIntel SSD 520 120GB SSD RAID 0
VID: ATI FirePro V4800
RAM: G.SKILL Ripjaws Series 8GB (4 x 2GB) 240-Pin DDR3 1600 F3-12800CL9D-4GBRL
I have swapped power supplies. I have swapped identical RAM. I have swapped video cards. I have used Ultimate Boot CD to run Memtest and other stress tests and everything passes with flying colors. BIOS is loaded with defaults fail safe. RAID array is created using all defaults for a RAID 0. Everything points to SSD firmware or other issues. Maybe RAID 0 with 2 Intel 510's using a AMD SB850 is not supported? Firmware versions on the 510's are both PPG4 which is the latest. Am I doing something wrong? Anyone have any ideas? I am very disappointed that that I can not get my RAID 0 stable. BTW I am doing no overclocking etc. Hardware and errors follow. Thanks!
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [D:\Kingston\BSODDmpFiles\chapmunger\Windows_NT6_BSOD_jcgriff2\031112-15210-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7601 (Service Pack 1) MP (6 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506 Machine Name: Kernel base = 0xfffff800`02c5a000 PsLoadedModuleList = 0xfffff800`02e9f670 Debug session time: Sun Mar 11 00:13:13.124 2012 (UTC - 6:00) System Uptime: 0 days 0:04:46.289 Loading Kernel Symbols ....................................... ........................ ....................................... ......................... .............................. Loading User Symbols Loading unloaded module list ....... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck D1, {fffff88001308c08, 2, 8, fffff88001308c08} Probably caused by : Ntfs.sys ( Ntfs! ?? ::NNGAKEGL::`string'+2bf0 ) Followup: MachineOwner --------- 4: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If kernel debugger is available get stack backtrace. Arguments: Arg1: fffff88001308c08, memory referenced Arg2: 0000000000000002, IRQL Arg3: 0000000000000008, value 0 = read operation, 1 = write operation Arg4: fffff88001308c08, address which referenced memory Debugging Details: ------------------ READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002f09100 fffff88001308c08 CURRENT_IRQL: 2 FAULTING_IP: Ntfs! ?? ::NNGAKEGL::`string'+2bf0 fffff880`01308c08 55 push rbp CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0xD1 PROCESS_NAME: explorer.exe TRAP_FRAME: fffff8800a580fb0 -- (.trap 0xfffff8800a580fb0) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=fffff88001308c08 rbx=0000000000000000 rcx=fffff8800a581180 rdx=fffff8800a582770 rsi=0000000000000000 rdi=0000000000000000 rip=fffff88001308c08 rsp=fffff8800a581148 rbp=fffff8800a581280 r8=fffff8800a581900 r9=fffff8800a581280 r10=fffff8800a582970 r11=fffff8800a5811b8 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei ng nz na pe nc Ntfs! ?? ::NNGAKEGL::`string'+0x2bf0: fffff880`01308c08 55 push rbp Resetting default scope LAST_CONTROL_TRANSFER: from fffff80002cd61e9 to fffff80002cd6c40 FAILED_INSTRUCTION_ADDRESS: Ntfs! ?? ::NNGAKEGL::`string'+2bf0 fffff880`01308c08 55 push rbp STACK_TEXT: fffff880`0a580e68 fffff800`02cd61e9 : 00000000`0000000a fffff880`01308c08 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx fffff880`0a580e70 fffff800`02cd4e60 : 00000000`000000e9 00000000`00000000 fffff800`02ce1845 fffff880`01269840 : nt!KiBugCheckDispatch+0x69 fffff880`0a580fb0 fffff880`01308c08 : fffff800`02d02a7c 00000000`00000001 fffffa80`09667000 fffffa80`08c92d01 : nt!KiPageFault+0x260 fffff880`0a581148 fffff800`02d02a7c : 00000000`00000001 fffffa80`09667000 fffffa80`08c92d01 fffffa80`08d1aea0 : Ntfs! ?? ::NNGAKEGL::`string'+0x2bf0 fffff880`0a581150 fffff800`02d024fd : fffff880`01269834 fffff880`0a582770 00000000`00000000 fffff880`01219000 : nt!_C_specific_handler+0x8c fffff880`0a5811c0 fffff800`02d012d5 : fffff880`01269834 fffff880`0a581238 fffff880`0a5820a8 fffff880`01219000 : nt!RtlpExecuteHandlerForException+0xd fffff880`0a5811f0 fffff800`02d12361 : fffff880`0a5820a8 fffff880`0a581900 fffff880`00000000 ffff5fff`ffffffff : nt!RtlDispatchException+0x415 fffff880`0a5818d0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDispatchException+0x135 STACK_COMMAND: kb FOLLOWUP_IP: Ntfs! ?? ::NNGAKEGL::`string'+2bf0 fffff880`01308c08 55 push rbp SYMBOL_STACK_INDEX: 3 SYMBOL_NAME: Ntfs! ?? ::NNGAKEGL::`string'+2bf0 FOLLOWUP_NAME: MachineOwner MODULE_NAME: Ntfs IMAGE_NAME: Ntfs.sys DEBUG_FLR_IMAGE_TIMESTAMP: 4d79997b FAILURE_BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_Ntfs!_??_::NNGAKEGL::_string_+2bf0 BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_Ntfs!_??_::NNGAKEGL::_string_+2bf0 Followup: MachineOwner ---------
Loading Dump File [D:\Kingston\BSODDmpFiles\chapmunger\Windows_NT6_BSOD_jcgriff2\031012-22963-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7600 MP (6 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 7600.16841.amd64fre.win7_gdr.110622-1503 Machine Name: Kernel base = 0xfffff800`0285a000 PsLoadedModuleList = 0xfffff800`02a97e70 Debug session time: Sat Mar 10 22:15:14.047 2012 (UTC - 6:00) System Uptime: 0 days 0:02:55.014 Loading Kernel Symbols ....................................... ........................ ....................................... ......................... ............. Loading User Symbols Loading unloaded module list ..... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck F4, {3, fffffa8009348b30, fffffa8009348e10, fffff80002bd2300} Probably caused by : hardware_disk Followup: MachineOwner --------- 3: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* CRITICAL_OBJECT_TERMINATION (f4) A process or thread crucial to system operation has unexpectedly exited or been terminated. Several processes and threads are necessary for the operation of the system; when they are terminated (for any reason), the system can no longer function. Arguments: Arg1: 0000000000000003, Process Arg2: fffffa8009348b30, Terminating object Arg3: fffffa8009348e10, Process image file name Arg4: fffff80002bd2300, Explanatory message (ascii) Debugging Details: ------------------ PROCESS_OBJECT: fffffa8009348b30 IMAGE_NAME: hardware_disk DEBUG_FLR_IMAGE_TIMESTAMP: 0 FAULTING_MODULE: 0000000000000000 PROCESS_NAME: csrss.exe EXCEPTION_RECORD: fffff88001ed8b78 -- (.exr 0xfffff88001ed8b78) ExceptionAddress: 0000000077514e8f ExceptionCode: c0000006 (In-page I/O error) ExceptionFlags: 00000000 NumberParameters: 3 Parameter[0]: 0000000000000000 Parameter[1]: 000007fefd47d8a8 Parameter[2]: 00000000c000000e Inpage operation failed at 000007fefd47d8a8, due to I/O error 00000000c000000e EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x. CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT CURRENT_IRQL: 0 ERROR_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x. EXCEPTION_PARAMETER1: 0000000000000000 EXCEPTION_PARAMETER2: 000007fefd47d8a8 EXCEPTION_PARAMETER3: 00000000c000000e IO_ERROR: (NTSTATUS) 0xc000000e - A device which does not exist was specified. EXCEPTION_STR: 0xc0000006_c000000e FAULTING_IP: +23a 00000000`77514e8f ?? ??? BUGCHECK_STR: 0xF4_IOERR_C000000E FOLLOWUP_IP: +23a 000007fe`fd47d8a8 ?? ??? FOLLOWUP_NAME: MachineOwner MODULE_NAME: hardware_disk STACK_COMMAND: kb FAILURE_BUCKET_ID: X64_0xF4_IOERR_C000000E_IMAGE_hardware_ disk BUCKET_ID: X64_0xF4_IOERR_C000000E_IMAGE_hardware_ disk

Thanks for the help! It is appreciated. Power supply is Antec 380W. I have tried swapping out with identical one - both were brand new and I have had pretty good luck with Antec in the past so I kind of doubt that's it. Wish it was so easy! The machine is on a good line interactive UPS as well so power fluctuations are not causing this.
I am using the hardware RAID on the SB850 - it requires loading the latest driver from USB during installation. But prior to that it requires a Ctrl-F and into the RAID setup. I choose RAID 0 and then select both Intel 510 120GB SATA III. The two SSD have the exact same firmware which is the latest per Intel Website.
Drivers are the latest for Win7x64 from here:
http://www.msi.com/product/mb/890FXA-GD70.html#/?div=Driver&os=Vista%2064
This problem is posted in two other spots - Intel Forums and Windows Seven Forums
http://communities.intel.com/thread/28220?tstart=0
http://www.sevenforums.com/crashes-debugging/218850-bsod-msi-890fxa-gd70-w-2xintel-ssd-520-120gb-ssd-raid-0-a.html
No one has been able to solve it yet. Seems like MSI and Intel are both good companies but these products are not compatible in the configuration I am attempting.

Geforce GTX 550ti 1GB or GTX 460 1GB or other?

I have a 2 year old homebuilt i7 920 with 12GB ram built on an Asus P6T MB with a Seasonic 650W PS. I'd like to upgrade the current Graphics card that was fine for Photoshop but not for Premiere Pro which I'm just experimenting with. I'd like to get a better card for it without going crazy because this will not be my main computer. I never OC'd it either as for Photoshop it seemed fine at the time.
It will be used typically for making under 5 min videos that consist of a around half doz clips each from my Canon 1DM4 in HD 1080. Not too much in the way of effects currently with unsharp mask, color correction and transitions etc.
The ones I've sort of narrowed down to are the GTX 460 1GB or maybe the GTX 550ti 1 GB might do as well for this use? I don't like limiting myself if I'd see much of a difference between them. I'm also totally open to any suggestions for others as well.
As a side note, I'm also in the planning stages for building a new computer from scratch and that will be my main computer that I'll most likely put a better card in during the coming month or two.
While I've built several computers over the years I'm finding this graphics card choice bewildering to say the least! I hope that's enough info to go on and I greatly appreciate any help as most review sites for cards pertain mostly to gaming.
Thanks in advance,
Jim

I don't know the power needs of my GTX 285 (in a file somewhere) but I wasn't worried 'cause I have an 850 power supply
I do know that the card has 2 power connections... I presume one for the GPU and the other for the onboard fan
Before you think your PS will work... check your total requirments
Power supply calculator http://extreme.outervision.com/index.jsp (the PRO version)
Or http://educations.newegg.com/tool/psucalc/index.html?Tpk=power%20supply%20calculator

GTX 460 1GB CUDA support in CS5.5?

I've read the list of supported CUDA boards for CS5, but does this mean that the GTX 460 1GB boards will never have support in CS5.5?

Think what could be done with 2, 3, or 4 GPUs.
Hey, no one else at this point even has one. So we Premiere Pro users are lucky in that regard.
Personally, I still think the move away from the proprietary CUDA are towards OpenCL is more important than adding SLI That opens up ATI cards as well. And for the money, ATI cards often have double or triple the number of stream processors over nVidia's cores. That can mean significantly better performance out of ATI cards for the same or less money.

Msi 890FXA-GD70 debug "ff" help please

msi 890FXA-GD70
amd phenom II X6 3.3 GHZ 1100T
TR2 RX 750w Thermaltake
2 sticks = 4G PC3-12800 1600mhz DDR3 Patriot
Radeon HD 5770 1gb pci-e
coolmaster 912 haf case
I've been reading other forums.. i tried many steps clear bios, remove battery, change the shunt (I also disconnected the PSU cable before these steps)\\\\\\ re-lap CPU 2 times, boot on 1 stick DIMM1 slot to fix my problem.. everything started today in the morning.. i can say my pc is new..i build it about 2 days ago everything was working fine this morning i tried turning it on and i kept on getting the "ff" code.. i dont want to return this motherboard i barely have 5 days

Quote
antistatic-mat
You didn't power it on there did you? As anti-static means it's preventing static.
However it's conducting!!
That mat may have killed it when you tried to power it.
I would RMA the board in this case and never ever power it again on such a mat.

MSI 890FXA-GD70 and 3Ware 9750-4i BIOS issues

This is my second build with this motherboard. This post is just to help anyone who might be trying to get similar hardware combinations to work.
The BIOS revision is 1.7, which was the revision the board came with.
When running with a 3Ware 9750-4i board you will find that the 3Ware BIOS will complain about not being able to install. At first it was complaining about the motherboard BIS not providing enough RAM to live in, but after I set the on-board SATA controller to AHCI is stopped complaining and just didn't show up at all.
Now, don't be discouraged if you aren't booting from the 3Ware controller, because this won't stop it from working. When the OS loads the driver, everything is fine.
I suspect it would also work if you completely disabled the on-board controller, but that wasn't an option for me. I wanted to run three additional HDs and two optical drives on that controller, as well as the four drives on the 3Ware.
I kept experimenting with slot positions for the cards, but nothing produced a change at all.
Finally I spent time in the OS trying to make the AHCI drivers for the on-board controller work with connect/disconnect. There appeared no way in Win7 x64 to get any AHCI drivers to load but the default Microsoft ones, which don't support hot-swap or even connect/disconnect.
It appeared to me that the only AHCI drivers supplied by AMD or MSI specifically work only when the controller is in RAID mode. So I tried setting the controller to RAID mode in the BIOS, and discovered that it now played nice with the 3Ware BIOS. Now I am going to reinstall Windows 7 with the 3Ware drivers and select a 3Ware drive to boot from, to see if I can get the AMD or MSI-supplied drivers to work with the on-board controller. I suspect I will get all the features promised then. If I don't, I will return here and report the results.

I completed the new install of Win7 - this time with the 3ware controller as the primary, and the on-board SATA set to RAID.
First, I had to load drivers for the on-board RAID during the install, just to let the install continue. Then I had to load drivers to tell Win7 about the drive where I wanted to install. I thought it would ask for both up front, but it wouldn't take both - it only wanted the drivers for the controller to which the DVD was connected. THEN, after it was ready to ask for a location for the install, it let me put the 3ware drivers up.
Once the system was loaded, I was disappointed to find that none of the on-board RAID drives showed up in the add/remove dialog, but I was able to use a utility to make them work with hot-swapping. It is called Hotswap!
http://mt-naka.com/hotswap/index_enu.htm
and it allowed me to connect/disconnect drives plugged into the on-board controller housed in the Thermaltake MAX-2533.
With the settings like that, the BIOS issues disappear, with both the on-board RAID and the 3ware co-existing nicely. This indicates to me that there is likely something wrong with the standard AHCI BIOS-related screen that makes the 3ware controller unhappy. I doubt the 3ware is the only BIOS-installing card to feel that way, so if you have your drives set to AHCI, but have issues with any other cards, you might look into setting the drives to RAID or to IDE (though you lose some features like NCQ)
I also forgot to mention that I also have a four-port PCI-Express NIC from Intel in the system, so I have updated the system summary below:
MSI 890FXA-GD70 | AMD Phenom II X6 1090T | ZALMAN CNPS9900MAX-B | CORSAIR Vengeance 16GB CMZ16GX3M4A1600C9B | HIS Silence H557HR1G Radeon HD 5570 | Antec Solo Black case | Corsair CMPSU-750TXV2 | 3ware LSI00216 (9750-4i) | Intel PRO/1000 PT Quad Port NIC | Seagate Barracuda XT ST32000641AS (x7) | Thermaltake MAX-2533 | Plextor PX-L890SA | Plextor PX-B940SA-11

MSI 890FXA-GD70 temperatures issue

I carefully read those topics where there are problems with the motherboard specified, to find an answer to my problems but were not advertised until now.
These are:
A. JMicron controller temperature is very high, very hot to the touch (I use an ATA100 HDD WDC);
Two. any USB storage temperature is very high since its introduction in USB ports.
I mention that I had these problems right from the start.
However, I managed some good results enough Ock (CPUz @ 3900 MHz FSB @ 296MHz) to realize that my motherboard properly respond to tasks.
If the first problem concerns me in terms of overclocking that I am going to apply it (although tensions on the controller are not affected directly), the second issue is worrying because I have never met before on other boards.
My configuration is on MSI benchtable :
CPU: AMD Sempron 140 (or Athlon X2 4400 after ock) with Thermaltake Frio
MB: MSI 890FXA-GD70, latest BIOS (v1.13)
RAM: ADATA 1600G 4GB @ 1333MHz, CL 9-9-9-24
HDD: WDC 80GB ATA 100
GPU: Asus 2400 Pro
PSU: Codegen 400W.
Thank you.

Quote from: Jack on 23-February-12, 00:28:18
Mh, the only way electric devices can warm up is because they are supplied with power (Voltage x amperage). Amperage is nothing the board can control. The devices will pretty much suck what they need to work. So, basically, you need to measure the USB output voltage on the board side with a volt/multimeter to find out if anything unusual comes up.
The board can't "heat up" the devices any other way.
he is right! without exact heat levels its not possible from just saying something is getting hot to determin if something is wrong without actual data of any kind (heat or there power draw).
it might be that the other system you tested the devices on couldnt supply enougth ampage to the devices so the usb devices in question would just bottleneck there speed staying very cool as its running slower! usb 3.0 devices tend to pull more then an old style usb2.0 device but pull a lower ampage by restricting there speed to funcion without erroring data in a lower ampage port!
the heat may just be a byproduct of running at there native speed with no ristrictions placed on them! without a comparable system capable of loading the device at its maximum load it can draw its hard to say for sure if anything is wrong at all (just doesnt sound normal if your other system is capable of pushing maximum load into them)!

Noob assistance MSI 890FXA-GD70 recommendation

I am building a new computer mainly to play Eve Online and surf the web/homework blah blah blah. I picked this board (MSI 890FXA-GD70) and would like some assistance in picking the ram and if possible some input as to what i have chosen would be nice. I am unsure about buying ram for this board i dont plan on overclocking so i was going to get the 1333mhz but i was wondering if it would be a bad idea to get the 2133 1800 or 1600 ram even though I wont be setting it up for OC. although i say im not going to OC i like having the option maybe one day down the road i will. also this is not a mobo question but the game i play eve online requires atleast shader 3 for video and i dont see anything on the details for the video cards i was looking at about shader models so if you guys could take a look at what i have picked out for my new build and some input on my choices would be greatly appreciated.
MOBO - MSI 890FXA-GD70 AM3 AMD 890FX
Processor - AMD Phenom II X4 965 Black Edition Deneb 3.4GHz
Video Card - GIGABYTE GV-R687OC-1GD Radeon HD 6870 1GB 256-bit GDDR5
plan is to use onboard audio unless you guys talk me into getting a card and will be getting SSD maybe about 80gb to run windows/eve with another prolly WD blue for storage. And I will be getting aftermarket fan(s). this will be my first build so any input is appreciated. thx

There are so many correct, good choices.. you are asking for what we like. That can become a big list of answers that only confuse you. Compatibility... stability.. these are the important parts. If you go to the MSI website and look up your board, there is a list of tested memory, videocards and more. The CPU's are standard memory 1333. Anything else is an overclocking question. MSI did not test every available sold product on the market. The list is only the ones they did test. You will have to use possible other reference points if you want something not on their list.
The equipment you have listed for an opinion, are compatible. I would find it hard to believe the 6870 doesn't give you the shaders you want for your game. The card is loaded with great video graphic adjustable abilities. There is no Power Supply listed, get a good one. 500w ... more. Your videocard lists the minimum voltage requirement. You want a power supply with the amps you need.. not just wattage. Do some reading, you will pick a good one. Module Power supplies with removable wires can offer better ventilation, by not blocking air way with wires. But some of the good power supplies have all attached wire sets.
That's it for me. Unless you want to know if I like 'A' over 'B', and on-line reviews and other research can guide your buying decisions from there. I looks like you, with a good PSU and a good air flow case, your on your way. That will give you the start you want to use your PC and you can grow from there. Unless you have deep pockets, and then you can just go for it now. Oh yea... a Soundcard can't hurt. But the sound on the board is good.
Good Luck.

Code FF :( Please Help MSI 890FXA-GD70

Specs:
MSI 890FXA-GD70 AM3+ AMD 890FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard
AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz Socket AM3 125W
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
EVGA GeForce GTX460 1 GB Superclocked GDDR5 PCI-Express 2.0 Graphics Card -
Western Digital Caviar Black 1 TB Bulk/OEM Hard Drive 3.5 Inch, 32 MB Cache, 7200 RPM SATA II
Corsair - Gaming Series 700-Watt ATX CPU Power Supply
I had everything working for 8 months or so then everything suddenly went bonkers....my cpu wouldn't start up. I replaced my PSU and took everything apart and I had it working outside of my case for 2 weeks and then it decided not to start up again.....I resat all components with no luck.
I RMA'd my motherboard to MSI and had it swapped out. Now....I went to reseat everything and like an idiot; I had spilled excess arctic silver 5 onto the mainboard socket and the PCU. I cleaned everything best I could without any solution and tried to start it up; CODE FF (only using 1 stick of ram and video card).
I did some reading and picked up some loctite electrical cleaner http://www.rshughes.com/products/079340_1174633.html
and cleaned everything out. I used a fine brush to clean out the socket.
Now; I installed pcu; heat sink; 1 stick ram (tried all slots) video card. I also made sure my power connections were hooked up---pcu and mainboard---I still get a code FF immediately..no post; nothing. Every time it goes to code FF and nothing else. Fans run and the all lights on the motherboard light up...the PCU lights are on as well. (all 4)
I've tried every solution I've read on this board and whatever google could find for me....my questions is (sorry for long story); should I just replace my PCU and motherboard as I messed it up with the arctic 5?
Thanks for any insight!

Quote from: Scrumhalf01 on 29-February-12, 22:57:23
Don't have the spare parts or I would have done that.....do computer shops willingly let you test out pieces you bring in to their shops? If there was an issue with the motherboard could it fry the new pcu installed?
Quote from: Scrumhalf01 on 29-February-12, 22:57:23
Don't have the spare parts or I would have done that.....do computer shops willingly let you test out pieces you bring in to their shops?
yes eventually, you have to ask them
Quote
If there was an issue with the motherboard could it fry the new pcu installed?
yes its possible

MSI 890FXA-GD70 | ATI/AMD Downloads | Advice needed on a few things

Hi
I have a few questions to which someone would probably know off-hand the answers to, so here goes:
1. I purchased the MSI 890FXA-GD70 along with an AMD Phenom X6 1090T BE CPU and need some recommendations on which 8GB (2 x 4) memory kit to purchase. This will be used with a 64 bit OS (Win 7/Linux) and would like to slightly overclock the memory (IF NEEDED) to reach a CPU speed of 4.5GHz. I would prefer Patriot, Corsair or Gskill DDR3 10666 or higher...whatever would do the job.
2. This question involves downloading and installing the Catylist drivers for the motherboard. I DO NOT use an ATI/AMD GPU, but rather a nVidia 580 Reference board, so I am under the assumption that I DO NOT need to download any of the catalyst drivers EXCEPT the following:
AHCI
SB Driver
RAID
Those are directly related to everything BUT the GPU...if I am wrong, please correct me. For the following components, I usually go to the individual manufactures web-site to download drivers:
RealTek LAN: RTL-8111DL PCI-E LAN Driver - v7.034 - 2010-DEC-22
IEEE 1394: From VIA - VT6315N
Realtek Audio: From Realtek ALC889/ALC892
USB 3.0: From NEC
I have not yet installed the mobo yet as I am awaiting for memory suggestions, thus I am grabbing all the absolute latest drivers for my system beforehand.
I just downloaded the RTM SP1 for Win 7 64 file and addition to that, wish to merge (slipstream) the above drivers into the Win 7 OEM DVD so I have everything ready to go.
3. In regards to AHCI, do I or can I use that with a fresh install of Win 7 or is AHCI reserved for those with SSD's ? I know I can use AHCI via Linux which I do on several other boxes, however, I am not sure about Windows 7 64.
I suppose that wraps it up. All this is replacing my DFI LanParty 790FXB-M2RSH board in which I fell in love with, however, DFI is not supporting/making that line of boards again, so my choice was between MSI and Gigabyte. Obviously, you can tell who won.
If there is anything I should be 'prepaired' for (e.g. bugs, troubles, etc.) feel free to post the information.
Thank You Very Much
Tim
ARS N9NU
Digital Audio Productions

Quote
some recommendations on which 8GB (2 x 4) memory kit to purchase
The following kit is in use by some of the forum members and it performs exemplary in all instances. Although being a 1333 it will OC to 1600 at 1,5V. The link is for the UK store, but they are available through the Crucial US store as well. http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=930A546EA5CA7304
Quote
This question involves downloading and installing the Catylist drivers for the motherboard
Your analysis is quite correct. Insert your GPU card before your windows installation. Once the installation is complete you can then install the latest NVidia drivers, or start with the ones that shipped with your GPU.
Quote
If there is anything I should be 'prepaired' for
Initially start with only one mem module, single optical drive, single HDD and GPU card. Ideally do ar barebones build outside the case on a non-conducting surface. Get everything up and running, and then transfer everything to the case. Test if all is still normal, and then start to add the other copmponents, ie. 2nd mem module, HDDs, etc.

MSI 890FXA-GD70 AM3 - Hard Drive in Sata Port 6 Not recognized in WIN7-[SOLVED]

I just bought this motherboard (MSI 890FXA-GD70 AM3), new memory, case and processor. I love it. But while I can put something together, I do not consider myself much more then an experienced novice.
Anyway, I bought a 5th hard drive and plugged it into SATA connector 6. Connector 5 remains unused. The new hard drive is recognized when the BIOS boots, but in Windows 7, I only show the first 4 drives like always. I just want to use this drive as a 5th hard drive for normal use and storage.
I went into the BIOS to see if there was a setting I was missing; read through the posts to see if I could find the answer; and prayed to GOD, but nothing has worked! I have found nothing on this topic, but then the FORUM is hard to navigate after a while with people not carefully choosing their topic subject name. (Why do people sometimes post - I HAVE A PROBLEM - without anything in the SUBJECT line to help the casual reader know what they are asking about?) My searches were fruitless, but then I know the key to a good search is using the right keywords.
I know this is going to turn out to be a simple setting, but can you help? Thanks in advance! And when the solution is presented, I will post back that ALL IS WELL!

PROBLEM SOLVED! Found it myself through careful research.
This is the link that helped me: http://www.ithinkdiff.com/how-to-enable-ahci-in-windows-7-rc-after-installation/
Apparently, because I had IDE and not AHCI enabled in the BIOS, only the first 4 ports were being identified. AND because I had not not changed the BIOS to AHCI before the installation of Windows 7, NO obvious way to change the setting AFTERWARDS!
In part what the post link above states:
AHCI (Advanced Host Controller Interface) enables native command queuing and hot-plugging through SATA host controllers (Serial-ATA) for your hard drives. In many scenarios it enables more efficient multi-tasking. Vista was the first Windows OS to support AHCI out of the box, where as Windows 7 does the same. But an issue with AHCI is that if you install the OS without enabling AHCI in the BIOS, enabling it after installation will render your OS unusable. This is because Windows disable the AHCI driver since it is not needed during the installation.
There is one way to fix this, although you need to have knowledge of registry editing. The detailed steps from Microsoft are as follows:
To resolve this issue, enable the AHCI driver in the registry before you change the SATA mode of the boot drive. To do this, follow these steps:
1. Exit all Windows-based programs.
2. Click Start, type regedit in the Start Search box, and then press ENTER.
3. If you receive the User Account Control dialog box, click Continue.
4. Locate and then click the following registry subkey: HKEY_LOCAL_MACHINESystemCurrentControlS etServicesMsahci
5. In the right pane, right-click Start in the Name column, and then click Modify.
6. In the Value data box, type 0, and then click OK.
7. On the File menu, click Exit to close Registry Editor.
After this you’ll have to restart your computer, go to BIOS and enable AHCI. When you log in to Windows again, you’ll notice the installation of drivers for AHCI. Another restart will be required to finish the driver installation.
I had been trying to select something in the BIOS other then IDE (choices are IDE, AHCI and RAID) to see if that would result in my 5th drive being recognized, but when I selected AHCI or RAID, the OS would flash the EVIL blue screen before it completed booting into Window 7.
I copied the instructions here in case the link gets disabled in the future. This link explained why I was having the problem I was having and how to solve it.
Thanks to everyone who tried to assist. I consider this closed.

Msi 890fxa-gd70 posting problems

the problem started after i installed a new thermaltake frio cpu cooler, i installed it outside of the case on the box the motherboard came in. I get the splash screen but the keyboard wont respond and hangs at code 38 with a usb mouse and keyboard and one sata Hdd & dvd drive plugged in. if i remove the mouse and keyboard it goes to code 78 and hangs. if i remove the hdd & dvd drive it cycles through and tells me i have no boot device. i have tried different combinations and tryed moving the ram around, just 1 stick!. i have tried clearing the cmos throughout doing the different combinations. I have tried all the different sata ports for just the hdd, and i have tried all the different usb ports to try to get the keyboard to register, i did also try another known working usb keyboard. this motherboard has never been OC'ed this is a custom build computer for a friend so i only have limited time to keep messing around with combinations of hardware. the ram is tested and i also tried using one of my sticks from my rig with no luck. so here is the specs
msi 890fxa-gd70 mobo - bios 1.6
AMD phen II 555 BE - no oc and no unlocked cores
G. Skill rip jaws 1333 mhz cas 9
this rig was working perfect for 2 weeks before i tried to install the new HS, i already checked the pins on the cpu to make sure that i didnt damaged it. i always practice safe ESD rules and was wearing my bracelet. i was very careful when installing the new cooler and made sure it wasn't too tight of a fit, i have already done this before on my rig same mobo, cpu and cooler and had no problems with it. I am stuck in a corner and I am hoping to find some help out... Any suggestions? Please and Thank You in advance

i have tried that also, the main problem is that i cant get it past code 38 with an usb keyboard in it so that i can enter the bios. i can get it to cycle through and not hang, but that is without any keyboard or Hdd so im back at square one. i still need to try an PS/2 keyboard but finding one is actually harder than i thought it would be. this board hasn't have a bios update, it came with 1.6 already on it. its not even an month old yet. but thank you for an possible answer to this dilemma.

MSI 890FXA-GD70 Probs (FF and 24/8 Pin Prob)

Hey Everyone -
I picked up the following to make a 2nd gaming rig:
AMD Phenom II X4 965 3.4GHz
MSI 890FXA-GD70
DDR3 Corsair 1333MHz 4GB
DDR3 Kingston 1333MHz 2x4GB (Bought this thinking the Corsair was bad - using them separately - not together..)
I already have video cards/Harddrive/psu (1000w) that I know work.
I have 2 issues with the new motherboard (MSI 890FXA-GD70).
1) I can only power up the motherboard if I unplug the ATX 8-pin while the ATX-24 pin is plugged in.
a) while running like this I get the famous flashing "FF" code.
2) If I have the ATX 24/8 Pin plugged in - it seems to have a slight hiccup of power and then nothing happens (except 2 blue phase lights for the RAM stay lit)
a) I've tried switching RAM around with multiple combination (single/duel etc) in all DIMM slots (1-4)
a noobie question:
Am I getting the FF code - because that 8 pin is not functioning properly?
Just to note - ive also triple checked the CPU to make sure pins were not bent/placed wrong etc...
Thanks for any help - Ive tried searching everywhere for a fix - and the ones Ive found didn't work. (other then returning the board )

You tried everything you could in my book, yes I agree RMA the board.
8 pin must be connected else the CPU doesn't get power.
However, it could also be the CPU that's broken, best to RMA both, board and CPU.

MSI 890FXA-GD70 & SLI two gtx 460 1Gb ???

Similar Messages

Maybe you are looking for