MSI-9105 and Win NT 4 Server ?

One simply question? We can use the M/B MSI-9105 with the sys op Microsoft Windows NT 4 Server without drivers OR IRQ troubles?
I can't find more info about that in MSI web site.
Tnx & Bye

Quote
Originally posted by Assaf
It has winXP certificate, nothing official about NT4.0
link
I was not able to find a Windows XP certificate for the MS-9105 board. The link doesn't find anything and I couldn't find it by searching the Windows XP hardware compatibility site. Are you sure that it is certified?
Thanks,
Mark

Similar Messages

I have a prpblem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
Check options.."Web Server: Configuration" within LabVIEW.
LabVIEW Champion . Do more with less code and in less time .

IR6 and Win Server 2008

Could someone confirm if Win 2008 Server is supported with the IR6 release? I was on a webinar yesterday about ZESM and I asked the same question and was told that Win 2008 Server was supported. However, I cannot see any such reference when lookiing on Novell's site about ZESM.
Thank you in advance for any replies.
Scott

Daniel:
Thank you for the info.
Scott
>>> Daniel Spinatto<[email protected]> 4/28/2009 9:20 AM >>>
Hey there.
At this time, Win2K8 is not a supported platform in IR6. Also, Win2K/SQL2K support were removed from IR6.
Sorry for the delay.
Daniel
>>>
From: Scott Leonard<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 4/17/2009 10:22 AM
Subject: Re: IR6 and Win Server 2008
Daniel:
Thank you for checking into this.
Scott
>>> Daniel Spinatto<[email protected]> 4/16/2009 9:23 AM >>>
While I had not tried to install IR6 on Win2K8, I remember some conversations about support being dropped for SQL2K, and Win2K8 being added in IR6.
However, the website and documentation seem to not reflect those changes.
The Readme for IR6 still mentions that Win2K8 is not supported:
http://www.novell.com/documentation/...5.html#bcxgf96
I will try to confirm that internally and give back and answer.
>>>
From: Scott Leonard<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 4/16/2009 10:43 AM
Subject: IR6 and Win Server 2008
Could someone confirm if Win 2008 Server is supported with the IR6 release? I was on a webinar yesterday about ZESM and I asked the same question and was told that Win 2008 Server was supported. However, I cannot see any such reference when lookiing on Novell's site about ZESM.
Thank you in advance for any replies.
Scott

Msi k7t266 pro-RU Spontaneous Restart and win xp install problems

i have the following system:
athlon 1200ghz cpu with thermaltake cooler
msi k7t266 pro ru ver 2 bios ver3.7
nvidia geforce 2 mx400 64mb vcard
1x 128 ddr pc1600
1x 256 ddr pc1600
1x maxtor 7200 rpm 30gb HDD (master)
1x maxtor 5400 rpm 30gb HDD (slave)
1x cd-rom
1x cd-writer
1 conexant pci modem
1 lan card
1 casing fan
1 chipset fan
i have the following problems:
1. i formatted my HDD in my other desktop and installed it in my msi system. i booted from the cd and installed winxp. after installation in windows i proceeded to install updated drivers and such. after installing drivers and win xp sp1 but before being able to install office xp, my pc restarted and its own and when it rebooted i got this messsage: cannot start windows. c:windowssystem32configsystem is corrupted. i was not able to start windows again after this.
2. after the above problem, i proceeded to attemp to install win xp again. i wasnt succesful because i always get a message saying cannot copy whatever.dll file all the time. so the installation wont continue.
i hope u can all help me. i feel that the win xp cd might be busted, but then again i am also concerned about problem #1 above. i feel that if i can install windows again i will have the same "spontanous restart" incident that first started and caused (i think) probelm #2
pls help.
thanks
Anton ;(

Hi!
Really, I don't think this could be a hardware problem since WinXp takes more than few minutes to install, and you did it, then you installed drivers and SP1. Why did you format HD in the other PC ? I would try a new install, taking out all not necesary stuff, leaving only CPU, memory and video card and formatting again the HD. for a clean install; then go adding the other hardware one by one, installing it's drivers and rebooting each time. Finally before connecting to internet enable Firewall to prevent Blaster Worm ( Don't know if still is going around ). One thing: Be sure HD is well connected and configured: Master if is a slave conected to same wire..etc.- If again you get an error, I would look for a faulty HD. 8)

Slow applications start from win 2012 file server using win 7 workstations

I hope someone can help me with why applications are slow to load i have replaced a 8 year old server running win 2003 and replaced it with dell t620 running win 2012 r2 it is like 20 times faster but it is slower than the old server. the office has
7 win 7 x64 machines all our applications are running from win 2012 file server. The server is set up as following the server runs with two hyper-v machines one machine runs ad, file server, dhcp, dns and printer server and the other is domino server and remote
desktop.
the machine is more than capable but it is not so i started reading after i run out of ideas. i looked every where but the issue is with the server after trying everything else i did a simple test If i go to the application folder and click on it apps load
instantly if i then type a unc path it takes from instant load to 3 and a bit seconds the same as the workstations. The same speed if I use ip address.
network cards are intel
i would really appreciate if somebody has suggestions that i could try
thank you

Hi,
Do you mean that applications in the application folder start slowly when you access the application folder on the Windows 2012 R2 file server from Windows 7 workstations using UNC path or IP address. Do all the files in the application folder have the same
issue? Please create a shared folder on the file server, then access the shared folder from Windows 7 workstations to check if the issue still exists.
You could disable SMBv3 on server 2012 to check if the issue related to SMB protocol.
How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012
http://support.microsoft.com/kb/2696547/en-us
Warning: We do not recommend that you disable SMBv2 or SMBv3. Disable SMBv2 or SMBv3 only as a temporary troubleshooting measure. Do not leave SMBv2 or SMBv3 disabled.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Internet Explorer 11 and Flash on Windows Server 2012 R2

I used Windows Server 2012 R2 which has built within it Internet Explorer version 11. When loading a web site which has Flash content it prompts me to install Flash, but when I navigate to the Flash download site it says I must enable it because it is already installed.
After reviewing the directions for How to Enable Flash, the directions become worthless because they don't match the screen that I see.
QUESTIONS:
Does IE Version 11 have Flash built in or not?
If if does, how do I enable Flash?
If it doesn't, how do I install Flash?
Please don't tell me to load a media-rich web site, and go to "Manage Add-Ons" and enable Flash because the enable Flash command doesn't show up.

Repair IE? http://support.microsoft.com/kb/318378
The thing is... Adobe collaborates with MS on the updates for IE10 &11 in Win8 &8.1 (server 2012 also AFAIK) and then hands the code off to them. It's "Redmond's baby" after that. There's a KB in Windows updates (KB2898108) that prevents downloading the ActiveX plugin throug Adobe updater from here. Even if you manually download it, it'll prevent you from installing it. I have a Win 8 and Win 8.1 test machine set up and I've tried to uninstall the KB with no success.
Unfortunately I don't have a Server 2012 machine so it limits my troubleshooting. Chris Campbell has more insight into the ins and outs of Server 2012. Hopefully he'll add to this thread.

SAP R/3 4.7 INSTALLATION ON WIN-2000 ADVANCED SERVER.

Hello!
IS THERE ANYONE WHO CAN HELP ME?????????
Dear, plz. Give me the steps for sap r/3 installation on win 2000 advanced server.
I am not having password for sap community market place.
So, iam not able to get the steps for installation I AM HAVING THE FOLLOWING CD'S
1) SAP 4.7 GUI
2) JAVA
3) SAP KERNEL
4) ORACLE 9.2.1- 3 CD'S
5) SAP EXPORT- 7 CD'S
Plz. Help me in this.plz.mail me on my ID- [email protected]
Thanks & regards,
Sandeep Chaudhary
m-09312406060
0129-3260483,4120483

how come you have the cds and no access to sapnet? strange....
basically these are the steps:
-> install win 2k server
-> check for all hardware and software requirements (needed for sap installation)
-> install oracle server 9.2 and the appropriate patchset (being 9.2.0.8 at the time) and the interim patches (opatch)
-> install sap central instance using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> install sap database instnace using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> apply post-installation steps
but: without the installation guide and the relevant sapnotes it will be difficult to succeed....get access to sapnet asap!
GreetZ, AH

Printing from Adobe Reader X with HP UPD PCL6 ver 61.107.4.8232 and Win 7 x64

Hello,
I have a Windows 2003 32-bit server with HP UPD PCL6 driver, version 61.107.4.8232 installed for several HP P4014dn printers. I'm running into an issue printing from Adobe X on Win 7 x64 machines. There is a delay of about 5-10 minutes, per page, before the job is spooled and printed.
Any thoughts on why this only affects Win 7 x64 machines? Printing works without any issues on Win XP and Win 7 32-bit machines.
Thanks in advance.

This is true when printing a .pdf file opened thru IE and a saved .pdf file.

Memory violation / segmentation fault at k3b, kdenlive and wine

Hello, i cant run k3b, kdenlive and wine.
When i try to run some of listed apliactions i got segmentation fault.
Here are some logs:
strace k3b
http://wklej.org/id/350797/
valgrind k3b
http://wklej.org/id/350806/
strace kdenlive
http://wklej.org/id/350801/
valgrind k3b
http://wklej.org/id/350807/
I launched Wine separated version installed by PlayOnLinux, and just made a bash script in /usr/bin/wine:
#!/bin/bash
/home/webnull/.PlayOnLinux/WineVersions/1.1.44/usr/bin/wine $@
And wine runs from /home/webnull/.PlayOnLinux/WineVersions/1.1.44/usr/bin/win using /usr/bin/wine but this is not a solution, its just a shortcut to other installed wine.
@edit
SOLVED: BUG IN GLIBC 2.12-2 OR BINUTILS 2.20.1-3 JUST DOWNGRADED THESE PACKAGES USING http://schlunix.org/archlinux/core/os/
-- WebNuLL
Last edited by webnull (2010-06-15 14:31:49)

Here is some additional information that may or may not be of any relevance. I do not know.
On the old server, I compiled the code with the compilation commands: f95 program.for
I was able to compile and execute code with small, medium size or large arrays (with or without the additional -openmp flag).
If I repeat the same command: f95 program.for
on the new server, I get the following compilation error message for programs with medium size and large arrays:
In function `newmaxmalecor':
/mnt/ide0/home/gustaf/education/programming/cesprod100//chicago.for:4340: relocation truncated to fit: R_X86_64_32 against symbol
If I compile with the additional flags: f95 -xmodel=medium -m64 program.for
on the new server, there are no compilation errors and I can run the code in sequence.
However, when I compile with
f95 -xmodel=medim -m64 -openmp program.for
on the new server, compilation works, but I cannot execute the code with medium size and large arrays.
The programs for which I have to add the "-xmodel=medium" flag on the new server to be able to compile the code and run it in sequence, are exactly the ones for which I get segmentation faults when I introduce the openmp flag and try to execute the code in parallel fashion.
Is this just a coincidence?
Lage

User base Synchronization between SAP and MS Active Directory Server

Dear all!
I'm using Web AS 6.20 ABAP and MS Active Directory Server based on Win 2003 Server.
i successfully implemented the synchronization of user data between SAP and the ADS.
My question: Is there a way to customize the users on Active Directory Server in regard to their SAP authorization (roles auth. objects etc.)?
Currently I don't have a clue how to do this.
Regards,
Christoph

Have you searched on SDN for "Active Directory"? That turns up a number of results. I think your expectation might be backwards though, it's not how ADS exposes SAP specific data but how SAP uses ADS to store SAP specific data. My understanding (from quite some time ago so I am fuzzy on this) is that SAP can use ADS in much the same way it can use LDAP as an external user store.
The Security Newsletter from November 04 [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/sap security newsletter november 2004.pdf] mentions that a webinar is hosted on SDN about this exact topic, unfortunately I was unable to find a direct link.
Regards,
Marc g

MSI Drivers and Utilities DVD won't work

Hello, I've just purchased the parts to construct an entirely new computer, and I've chosen MSI Z77A-G41 motherboard. I put everything together, and I loaded Win XP on, and my plan is to upgrade to Win 8 during their special offer. I needed to go into Setup and change the SATA mode from AHCI to IDE, so that I could install XP. Once I had XP up and running, I inserted the MSI Drivers and Utilities DVD to load all of the drivers. However, when I put the disc in, it auto-runs, the driver/utility screen is shown 'blacked out' and I immediately receive a Windows error message: "DVD Setup Application" error. I went in through Windows Explorer to the programs on the DVD, and found DVD setup. By trying to run this from within Explorer, it takes me to the same error as when I auto-run.
The only thing I can think of is that I need to change something else in Setup, to run Win XP because it's so old? I'm pretty sure that there's nothing wrong with the new DVD burner, because I've used it to install XP, and also to extract and install Service Pack 2 and 3 (which I downloaded on another computer and transferred on a CD). If I knew exactly what needed to be installed from the MSI DVD, I could try doing it from within Windows Explorer. But, I'd still like to figure out what the Setup Application error message is telling me.
Any helpful suggestions will be appreciated.
Thanks!

A further note before I head off to bed. I was able to install Win XP service packs 2 and 3 using my new burner, and I've activated with Microsoft and downloaded and installed 117 updates. I have now used this same DVD burner that won't recognize or work with the MSI driver/utilities DVD, to install all of the drivers for my video card---that DVD auto-ran just fine. So, after doing some searches on Google about the "DVD Setup Application" error, not a lot of help but most people say that if another DVD will spin up and load things OK---it must be the fault of the DVD that won't load. In other words, I don't think that there's a problem with anything in the Setup on the motherboard.
So, if anyone has any further ideas, please let me know. Otherwise, I'm going to contact MSI tomorrow and see about a replacement DVD. Thanks.

Netbios and WINS accross subnets

Hi,
ive a really old application which checks AD Group memebership of the logged on user.
The authentication uses smb and samr protocol. To find the Domain Controller and
connect to \\dc\IPC$ it uses Netbios.
The Application an the Domain Controllers are in different subents / vlans. My question
is, as netbios broadcasts normally doesnt leave subents and will be blocked by routers
do i need a Wins Service in both subnets, the application vlan as well as the Domain
Controller vlan ? Or should it be ok the install wins on the PDC DC and Point my
Application Server to the Wins Service ? Well, i tried this Scenario, but that didnt work.
One thin i have to check is, if on the PDC the Computer Browser Service is started or
disabled, which is the Default on a w2k8r2 DC. Also Need to check which Servers are
elected for the Master Browser Role of the subnet. Also i will try to set those keys on
the PDC:
http://idamd.blogspot.de/2010/07/windows-2008-and-netbios-browsing.html
But iam not sure, if every subnet need his local Wins Service or not?
Thanks a lot,
Marcus

Hi,
According to this article:
To broadcast for the NetBIOS name is effective within a local network but is ineffective across routers, which do not forward broadcast packets. This means that the broadcast NetBIOS name resolution method does not work across routers. It can only be used
for computers within the same IP subnet.
http://www.techrepublic.com/article/how-netbios-name-resolution-really-works/#.
Regards.
If you have any feedback on our support, please click
here
Vivian Wang

Adding IIS 7/win 2008 R2 server to IIS 6.0 win 2003 Farm

Dear all
I have two tier architecture consist of two servers [Application server - Back end SQL]
I have migration plans for MOSS to windows server 2008 R2
so I am thinking of adding win 2008 R2 server as application server in the farm and decommission the 2003/MOSS 2007 server
is that OK or I will experience problems
Note: both servers will run MOSS SP2 and they are 64 bit
Regards

Could you pls show the steps?
Did you install weblogic and restart the servers.
Can you try in using JRockit, just identify the java version you are using is supported or not?
Please see the link http://docs.oracle.com/cd/E27559_01/install.1112/e27794/configtwo.htm
Use <full path to the setup.exe directory>\setup.exe -jreLoc <full path to the JRE directory>
Thanks
Tamim Khan

Report on DNS and WINS settings

Hi,
It doesn't look like there are built-in reports to show DNS and WINS settings for client machines in SCCM 2012? We are going to run a script to change all clients with static DNS and WINS settings and I need to have a report to show client machines with
and without the new settings. Can anyone help with this?
I have enabled 'DNS Server Search Order', 'WINS Primary Server' and 'WINS Secondary Server' in hardware inventory classes > Network Adapter Configuration (Win32_NetworAdapterConfiguration). I've done this in the Default client settings. There are other
client setting policies with a higher priority but I assume they are cumulative and so as this isn't set on the other client setting policies it should implement this?
Thanks,
Andrew

Hi,
1. Please make sure the hardware inventory has completed and the data about that hardware incentory has been written into database.
SCCM inventory troubleshooting
2. You could have a look on the query in the thread below.
SCCM custom report on DNS and
WINS information for all Domain Controllers in a collection
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Creating domain and Excahnge mailbox , Fax Server etc.. to small busiiness

Hi ,
I would like to create to my costumer who has 2 computer (Win 8.1 on both: one laptop and one is a desktop computer) by his demand a domain which will contain of course his company's name (I did check the domain availability on one of the Domain web
checkers) and of course a mailbox and fax server or fax2mail option which will allow all faxes being sent - to get to his inbox and not to a fax machine.
However I wonder what roles should I add (I guess the the following roles are necessary:
*DHCP
*DNS
*Fax Server
*also there is a need to install the Exchange (maybe on some other computer)
I haven't mentioned that I created a server 2012 on a desktop computer i5 processor, with 10GB RAM, 500GB HD capacity .. Not a "super server" but this server/computer can meanwhile "provides the merchandising"
Please assist here :)
Thanks in Advanved :)

Hi,
Based on your description, I understand that you want to set up the Windows Server 2012 as DC and deploy Active
Directory environment. Then, add some roles (DHCP, DNS and Fax Server) and Exchange Server on the Server 2012 DC. If anything I misunderstand, please don’t hesitate to let me know.
Please refer to following threads and articles, then check if can help you.
DNS
Server and DC
Checklist: Add a Domain Controller with
the DNS Server Service
DHCP
Best Practices and DC
DHCP
Server in DCs and DNS Registrations
Fax Server Step-by-Step Guide
For installing exchange server on DC, it is not recommended.
Installing
Exchange on a domain controller is not recommended
In addition, please also refer to following thread and check if provide you more detailed suggestions of roles
installation.
Multi-Role
Domain controller
Hope this helps.
Best regards,
Justin Gu

MSI-9105 and Win NT 4 Server ?

Similar Messages

Maybe you are looking for