Msi 965 neo f usb problem

hi all
i have msi 965 neo-f mainboard . But when i m shutdown computer my usb port dont close.What can i do ?

my system
msi 965 neo f mb
e 6300 cpu
2*512 elixir ddr667
thermaltake 560w psu
ide hdd
7600gs
my problem :  I shutdown computer but usb ports not close . my pc close but my webcam sensors work.

Similar Messages

  • MOVED: MSI K8N Neo 2 Platinum Problem

    This topic has been moved to Overclockers & Modding Corner.
    MSI K8N Neo 2 Platinum Problem

    A lot of things could be wrong but it will be easier to figure out if we know what you did.  When you say you changed settings in Bios, do you remember your last settings and what you did?
    It might be helpful if you created a sig (as described in the forum rules) to show what you have in your system like my sig below. (Hint- use profile button in sign on screen.)
    Things could be broken even if there is no visible evidence (such as flames or melted component) of course.
    If I had to guess and your d-bracket reading is correct, corrupted bios requiring new bios chip, but let's not guess as a lot of things could be wrong and you don't want to invest in a new bios chip if the board cannot be brought back to life.  Consider removing parts and testing them in an other machine.  Start with CPU and memory?
    Good luck.

  • MSI k8n neo platinum post problem

    I just bought a 2nd hand K8N neo platinum and I can't get it to post, I have reduced down to 1 stick of ram(tried all slots) vga and cpu running out of case. I have an ultra 600 psu that certainly should be doing the buisness as everything was fine on an NF7S-V2 up until 1/2 hour prior.
    On the led device it's starting 4 red then after a couple of seconds it goes 1 red 2 red 3 green 4 red which I found relates to keyboard controller. I've tried with various keyboards but no joy. I get nothing on the screen at all but that's the next stage in post.
    My memory is Twinmos 3200 twin x 2 x 512 double sided, which I saw in the sticky can be troublesome.
    Any body got any ideas?

    i am having an almost identical problem.
    First the system wont go past post,then i realised it would but only boot if i had the USB mouse unplugged (i noticed the d-brackets lights changed after i unplugged the mouse)
    then i was able to get to windows, however i couldn't do much (mouse wouldnt detect if replugged, keyboard not detected - all lights off)
    So i tried clearing the CMOS
    now i am having the same problem, except this time i get CMOS checksum error - defaults loaded
    then it tells me to press f1 to continue to del to enter setup, which i cant do since the keyboard wont work. so now im totally bamboozled
    I've tried changing the PSU as well with no luck (both were 500watts)
    Funny thing is, the pc having the problem is identical to the pc im writing on now, presonally i think the motherboard is not v good, since alot of people have this problem or similar to it. (and yes im using the keyboard and mouse now, that i tested on the other pc)
    SPECS:
    MSI k8N Neo Platinum
    Powercolor Radeon 9800 Pro
    AMD 64 3000+
    1GB Geil Memory
    Maxtor 160GB
    500watt Magna Dual Fans
    Will check what the D-bracket says and will report back.
    ok here goes:
    (with usb mouse plugged in)
    1= green
    2= red
    3=red
    4=green
    (without usb mouse plugged in) - but bare in mind i cant press f1 (no keyboard) to continue else i would probably be able to get to windows.
    1= green
    2= green
    3=green
    4=red

  • Flashing Bios on MSI 965 Neo

    I need help desperately, I have XP64 and downloaded the latest BIOS 1.8 for the 965 Neo, I have to use latest Hiren's Boot CD to boot into Dos and use the included NTFS for Dos to access my drive where I have the BIOS folder. This boot CD includes JMicron and SATA drivers so boot process works out well. The problmen is when I go to flash the bios by executing awflash865.exe, the flash window pops up and tells me to enter the BIOS file number, upon entering and telling it to program, it gives me an error of unknown flash type and comes back to the command prompt, any workarounds for it, or am I doing any mistakes, please help.
    TIA.

    Are you trying to flash from an NTFS-drive?
    FAT/FAT32 drives are recommended for BIOS Flash procedures. 
    If you have an USB Flash Drive try this Tool to prepare for a BIOS Flash:
    https://forum-en.msi.com/index.php?topic=108079.0

  • MSI 945P NEO-F, soundblaster problem

    MSI 945P NEO-F, I945P, Socket-775, ATX S-ATAII, GbLAN, DDR2, PCI-Ex16
    Intel Pentium D 930 3.0GHz Socket LGA775, 4MB, (overclocked to 3.2)
    TwinMOS 1 GB - DIMM 240-pin - DDR II
    Power supply 430 Watt
    WD800GD Western Digital 80GB WD Raptor Serial ATA Drive
    (including above raptor there are 5 internal hd's, 2 dvd burners)
    im trying to install a Creative SoundBlaster Audigy 2 ZS
    i uninstalled all drivers for on board sound card
    and then disabled on board sound in the bios
    then when i install hardware and drivers for new soundcard it doesnt work
    im a newbe at this is the jumpers or something i have to change?
    sorry if this is in wrong section

    my system detects the soundcard but the creative control center does not detect it
    "no cards found"
    im running vista at moment (using vista creative drivers)
    (in xp detected device and creative control center detected it too but no sound)
    i may invest in new psu alright but i dont think this is the problem in this case as i tryed soundcard before i bought hard drives
    the soundcard is probably 7 years old maybe its just no supported????
    (it was top of its range 400 euro in its day)

  • MSI K8N NEO Platinum Edition PROBLEM

    Hi (my english is not good sorry for that)
    I just got my new computer:
    MSI K8N NEO Platinum Edition
    AMD Athlon64 3200+
    Western Digital Caviar 160Gb
    PNY Verto GeForce 6800Ultra 256Mb
    1GB Value Select pc3200
    Levicom 500W
    The Problem is that when i start the computer, it boot and die directly no bootscreen what so ever, it boot and die.  i dont know what to do plz help me

    Make sure you have Both the ATX Wires on.. theres the Big one! (21Pins i think).. and the Small 4Pin Connector both need to be connected.. if you havent done so yet.. Another thing you could do is Take everything out and place it on a cardboard or something appropriate for the mobo.... I think your motherboard is shorting?.. if it's touching your case.. I had somewhat the same issue long time ago.. give it a try..if you want hope it helps..

  • MSI 875P NEO FIS2R AGP problems

    I have just purchased an MSI 875P NEO FIS2R motherboard and there is a sticker covering the AGP slot which says "Please use only 1.5V AGP cards to avoid pernament damage to this mainboard". However, on the website it says here http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=434
    "One AGP slot supports 8x/4x at 0.8V (AGP 3.0) or 4x at 1.5V
      (3.3V is not supported)." I want to use 8x agp @ 0.8v and the website says this ok but the sticker on the AGP slot on the motherboard says only 1.5V. Is this a mistake on the website or on the Motherboard and is it possible for me to use 8x AGP @ 0.8V without damaging the motherboard?
    I want to use an ATI radeon 9800pro.
    Anybody using 8x agp @ 0.8V and have they have any problems?

    Assaf IS THE MAN!! His answers are NEVER WRONG.. WORRY NO MORE about the voltage...

  • MSI P965 Neo-F reboot problems

    Hi,
    I have a MSI P965 Neo-F motherboard in my PC, everything works great except for one thing, rebooting.
    When i reboot or reset, it shuts down the operating system/BIOS, after that the PC stays on but my screen stays black.
    Does anyone know a solution?
    Thank you,
    ghostrider090
    full specs:
    Core 2 Duo E6600  (overclocked to 3GHz)
    MSI P965 Neo-F
    2x Kingston Value Ram PC5300 1GB
    Club3D Geforce 7950GT 512MB
    Huntkey 450W  (modded with coolermaster fan)
    Samsung SH-S182D
    2x Western Digital Caviar SE 250GB 8MB

    I dont know solution ...   
    i see the problem in mobo or revision of P965 itself ... there is many problems with restarts, reboots, first boot. It depend on version of BIOS you have, but i not found any version which solve this for me ...
    i using v1.9 now ... and i have problem with boot after hybernation with vista..
    after turning my computer off (in vista is normal to hybernate and shut down) i can boot my computer .. by its very strange. So, power comes up, but then instantly comes Windows Vista with logon screen - NO posting by BIOS, no RAID initial screen, no scaning for hardware... it comes instantly to windows - but windows are in some inconsistent state and i cant login (freeze/BSOD ... but pointer can be moved by mouse and login button shows efect if i move pointer over - so windows are in memory and working) ... in this state is HDD led all time ON (shining) ... i can shut down and boot up again and everything is OK (windows are normaly restored from disk)
    with older v1.5 BIOS ... my computer goes to same state like is described here - BLANK ... and BIOS setting was reseted
    so and here is one similiar problem
    https://forum-en.msi.com/index.php?topic=100524.0
    and one my thread .. its particly about this
    https://forum-en.msi.com/index.php?topic=107722.40

  • MSI K8N Neo 2 Multiplier Problems

    Check this out:
    Sudhian has found problems with the MSI K8N Neo 2 clock settings that have caused memory problems for them.
    http://www.sudhian.com/showdocs.cfm?aid=616

    this has already been shot down..
    Upsetting information

  • MSI 865PE Neo Series Restart Problem

    Hello,
    I have a problem on my MSI 865PE Neo Series Mobo when i restart my system using windows or by pressing ctrl+alt+del my pc won't restart and stay there forever on a black screen but when i press my reset button it will restart normally this is my one and only problem regarding this mobo... pls any help here. fix or any tips and suggestions...
    (*by the way this is just my friends computer and im the one who builds it and maintain it...)
    System Specs Of My Friend's PC:
    MSI 865PE Neo Series Intel P4 Motherboard w/ HT Technology Support
    Intel P4 @ 3GHz/800MHz FSB HT Technology
    512MB DDR400
    MSI NVIDIA GeForce FX 5700 @ 256MB DDR
    550W PSU 12A-30

    no guyz im using Windows XP Pro SP1 and its not a OS problem because the first time i boot the system i have no OS yet and then i press ctrl+alt+del then my system wont restart at all even in windows ive updated all drivers and mobo bios and increasing DDR Voltage to 2.8v and disabling HT has no changed at all any help would be appreciated... i think this is some problem with MSI mobo power management that it can't match ur psu so well unlike ASUS and GIGABYTE mobo runs perfectly fine. by the way its not my pc its my friend's pc and im the one who builds and hope to fix this one and only problem... everything else is ok except for the Restart Problem!!!!
    My System Spec:
    GIGABYTE GA-8INXP Intel E7205 Chipset P4 MB
    Intel P4 @ 3GHz/500MHz FSB
    1GB Dual Channel DDR266
    ASUS ATI Radeon X800XT @ 256MB GDDRIII/AGP8x
    Seagate 80GB SATA HDD
    Maxtor 80GB IDE RAID HDD
    Microsoft Windows XP Professional Edition @ Service Pack 2 RC1 (fully updated)
    My Friend's Spec:
    MSI 865PE Neo Series P4 MB
    Intel P4 @ 3GHz/800MB FSB
    512MB DDR400 CL2.5
    MSI NVIDIA GeForce FX 5700 @ 256MB DDR/AGP8x
    80GB IDE HDD (x2)
    Microsoft Windows XP Professional Edition @ Service Pack 1 (fully updated)
    *this is not a windows problem motherboard power management or bios settings bug here..
    *its my first time to handle a MSI Motherboard
    *and if any guyz out there need help regarding other problems or any problems in ur pc pm me in ym @ [email protected]

  • Msi 965P Neo Power Up Problem

    When I swicth on my pc only the front lights and the cpu fan turn on, there's no beep and no video.  Then I turn it off, wait five seconds, swicth on again and then computer boots. I've change my old power supply for a 550 W 24 pin new one, the 12V CPU power connector is pluged to the board and also installed a new cooler master fan to the procesor. Please help me.  My specifications are:
    MB: MSI 965P Neo Bios Version 1.5
    Video Card: ATI Radeon X1600 pro pci express
    Pocesor: Pentium 4 3.06GHz
    Memory: 1GB DDR2 Super Talent T533UB1G
    Power Supply: ATX 550 W
    Hard Disk: SATA Samsung 250 GB
    CPU Fan: Cooler Master

    PSU Specs:
    RHYCOM-SGT
    Input: 115V 6A 60Hz
    Model: ATX550W-4
    Red: +5V = 35A
    Yellow: +12 = 19A
    Orange +3.3V = 28A
    White:-5V = 0.5A
    Blue: -12V = 0.8A
    Purple: 5VSB = 2.0A
    Green: PS-ON
    Gray: P.G
    Black: GND

  • AMD64 3200 + MSI K8T Neo FISR2 memory problem

    I've had one KVR400X64C25/512 and it have worked like a charm. Now I've bought another one (total 1gb).
    When I've inserted it and start the computer I only get the CoreCell logo scren, it do not boot correctly.
    AMIBIOS is version 3.21a
    I've tried the following:
    * run only the new memory [works]
    * run only the old memory [works]
    * DIMM1 + DIMM3 [only CoreCell screen]
    * DIMM1 + DIMM2 [only CoreCell screen]
    * DIMM2 + DIMM3 [only a black screen]
    what should I do?

    Quote from: Tiresmoke on 22-August-05, 21:48:12
    A PSU is rated to run at +/-5% and that is well within it's rating. As for wether ists big enough there is no way we can say as you still did not give full system specs.
    If it won't run with the third stick of RAM then pull it out for the moment and see if the system will boot again. If it does then during post you will see a Bios version listed. That board only supports Bios versions to 2.2 at the moment so please also list what actuall Bios version you have.
    Ok, have booted with one instead of two sticks (one works, two don't, do not have three sticks)..
    AMIBIOS A6702VMS v2.2 released 030405. The autodetect settings (at startup): Clock = 400Mhz, CAS 2.5 which seems correct.
    More info:
    AMD64 3200
    MSI K8T Neo FISR2
    AMIBIOS A6702VMS v2.2
    Seagate 120GB SATA (no ides)
    CD rw + DVD-r combo drive
    floppy drive
    Saphire GF6800 (no GT or Ultra)
    Creative Audigy 2 Platinum Ex
    that's whats running in it

  • MSi 965 Neo-F

    How are MSİ 965 Neo-F
    I'm this to take

    Hi guys.
    I suggest Dallas and Corleone sort this out via PM (private message).
    As this is an english forum I have to close this.
    Dallas I hope Corleone can help you in your own language.
    Sorry but I close this.

  • MSI NEO PLAT- USB Problems

    i got the new drivers
    but my usb are not working when i put in my logitech 510 the light flashes 4 times on the mouse and all other usb probucts dont work!!!!
    help
    thanks

    Quote
    Originally posted by Supershanks
    Quote
    i got the new drivers
    Nice which ones
    can you please post some details so that we can help you, please include your case details and if your using the usb front panel connector.
    thanks
    cheftech case
    and the normal usb on Mobo
    when i disable them in the bios the mouse(working mouse) lights work..... but no movement......
    when the usb is enabled my mouse flashes once when pluged in...

  • MSI Wind PC barebone usb problem

    Hi,
    I'm having a problem with a new MSI Wind barebone pc I just purchased.  The USB ports only work in full speed instead of high speed (USB 2.0) mode.
    I don't think I had this problem before the bios update.  I updated the bios to the latest rev because of a problem with s3 mode.
    Any suggestions?
    Thanks

    Thanks for the advice.  I have another one on order to test my current OS install.  Hopefully, it will show that it is a motherboard chip issue and should qualify for a Newegg RMA.  I've built many PCs over the year, and I have not had this much difficulty in getting them to work properly.  The MSI PC Wind nettop seems like a good replacement for my several Shuttle XPC's (3 - 6 years old) that have reached their upgrade limits.  In the past three months, I've had to replace their special power supplies at over $80 a pop.  Newegg is selling the Wind for $140, and it seems to be a cost effective and "green" alternative to replacing power supplies.  I'll post the results of the replacement PC Wind in resolving this USB 2 issue.  Thanks again.

Maybe you are looking for