MSI 990FXA stops at b2 with new gtx card

I just bought a new graphics card. The card is a palit GTX titan.
My specs is as follows:
AMD phenom 2 x6
MSI 990FXA GD65
Corsair h60 cooling
Antec 550Watt
120 SSD
Palit GTX titan
Now when I put my old card/'s in, it works perfectly fine, but when I have the titan in, it just stops at b2. Or when I combine the titan with my old GTX 460 it would just flash a bar in the top corner. My setup before used the GTX 460 as main card and GTX 285 as physics processor. This worked and still works, only when I insert with any combination and alone it does not go any further than the b2 code.
I need an answer urgently as I am using the unreal 4 engine and the older cards just does not work well, it is fairly slow. Any suggestions??  Thanx.

Oky, I am back and still stuck on b2  I bought a 850 Watt power supply rated 80 plus. But still I get the same b2 problem. I have an old rig, core2duo 3Ghz, foxcon mBoard with 4 GB of DDR 3 Ram, and tested my GTX titan on that with my now old PSU 550 Watt Antec, just to be sure it is not my card, but it boots and seem to work fine. It is just when I connect it to my MSI rig that it gets stuck on b2 error code. Any other suggestions??

Similar Messages

  • Bios freezes on Hp IPISB-CH2 with new graphic card installed

    I own HP Pavilion Elite HPE H8 1010cs. Motherboard is HP IPISB-CH2. I bought new graphic card GAINWARD Nvidia GeForce GTX 970 4GB together with 600W PSU Corsair CX600M. First I tried my new PSU with my old GPU nvidia 550Ti. It worked perfectly. But when I replaced old card with new GTX 970, bios freezes on the first power on window. Escape does not work. Should I return new graphic card, or is there still some hope in this?
    This question was solved.
    View Solution.

    Hello @Tomas83,
    I understand that you are having issues getting your HP Pavilion HPE h8-1010cs Desktop PC towork with your Gainward GeForce® GTX 970 Phantom 4GB Graphics Card. I believe the reason you are experiencing this issue is the the break in the downward compatibility on the PCIe slots was broken at around the Gen 2.1 mark and you are trying to put a Gen 3.0 card in a Gen 1.0 slot. This in essence makes your computer incompatible with the graphics card you have chosen to use.  I am providing you an article on the overclock.net website titled The final answer to the controversial PCIe x16 version compatibility., where the author explains what I described and goes into how he made the determination. I would advise you review the article if you have any questions concerning the issue you are facing.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • How to change payment method with new credit card details. Not able to change current one as card has expired. Pl help

    I want to change my payment method with new credit card information as current credit card has expired. But when I try to change payment method , returns your payment method is not valid or allowed and continues to prompt to change the same. But when I try to update with whew credit card number, it doesn't accept and continue to refuse the payment method.
    This problem is not allowing me to purchase of any kind either paid or even free as well. Doesn't allow to even purchase free books even
    Please help to solve the issue
    Thanks
    Dpvora
    India

    You need to contact Apple Support for this kind of problem.
    http://www.apple.com/support/contact/

  • WHICH CARRIERS WILL ALLOW ME KEEP MY PHONE NUMBER WITH NEW SIM CARD?

    WHICH CARRIERS IN USA WILL ALLOW ME TO KEEP MY PHONE NUMBER WITH NEW SIM CARD ON AN IPHONE 5S?

    thank you. 
    i did not know that it was different from normal writing where one might use all caps to cull the attention of the public---as in a newspaper advertisement selling an item and the caps would be intended to make the ad stand out from other advertisements.  i'm old school i guess but im learning & i thank you.
    Did not intentionally try to yell at the readers.  Hope i didn't wake anyone up!!!  Again, my apology.  Thanx.

  • I have downloaded whats app/brave temple run but using netsafe card. well now it shows 1.98$ is pending , though m trying with new netsafe card to pay it is showing error saying Pls select valid method for payment. i used same method as i did earlier

    i have downloaded whats app/brave temple run but using netsafe card. well now it shows 1.98$ is pending , though m trying with new netsafe card to pay it is showing error saying Pls select valid method for payment. i used same method as i did earlier

    I have recently started having this problem in PSE8. The Adobe workaround
    did work, but I don't fancy having to re register each time I use it.
    What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
    It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
    If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
    Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
    Hope this helps

  • Flash movies makes horrible "flickering" sound with new graphic card!

    I just bought a Gigabyte GeForce 460 GTX 1GB and now when I watch Flash movies
    the movies makes a really bad "flick" flick" "flick" sound. If i scroll down and away from the actuall movie screen
    the bad sound stops and the movie plays normally. But soon as I scroll up to the movie the sounds starts again.
    Can't stand the bad sound quality anymore!
    I tried latest Firefox & Internet Explorer.
    I tried uninstall both flash and drivers then reinstall with the latest updates.
    I tried searching the web for solutions.
    My PC:
    HP Pavilion
    Intel Pentium 4 CPU 3.60GHz 360GHz
    Memory: 3 GB
    System type: 32 bit
    Windows 7 Ultimate
    My new Graphic card:
    Link
    Thanks for the help!

    Hi, We'll have to continue later. From Adobe:
    Due to system maintenance with Adobe.com, the log-in and authentication for the Adobe Forums will be temporarily unavailable for approximately 3 hours on Saturday, Sept. 11, 2010.
    Maintenance will begin at 7:00 pm PST and will be complete by 10:00 pm PST. During this time, the Forums will be in Read-only mode.
    We apologize for any inconvenience. Thank you.
    by Mark Nichoson at Sep 7, 2010 10:02 AM
    Expiring the announcement will not delete it but will remove it from the public announcement list.  Are you sure you want to expire this announcement?
    Are you sure you want to delete this announcement?
    For my Time Zone, that is in about 10 minutes. EDT for me. 10PM PST
    eidnolb

  • 3000 j115 A11 stopped working after installing new graphics card

    I thought i would be slick and install a new graphics card (asus GEForce 8500GT) after i put it in my 3000 j115 A11 everything stopped working. I can turn the tower on and it gives two beeps. Nothing displays on the monitor (it doesn't leave powersaving mode). It is also very quiet like it is not even trying to work. Did I just destroy my computer? Is there anything I can do?
    PS. I did take the asus card back out, so I'm not that lucky
    PSS. Got back to being able to boot but now I can't get back into bios to switch from PCI back to original built in card. If I try it just hangs after pressing enter to interupt normal setup
    Message Edited by Lazlo420 on 06-27-2009 12:05 PM
    Note from Moderator:  Gave it a more descriptive subject.
    Message Edited by JaneL on 06-28-2009 01:36 PM

    I find this thread very interesting. I am assuming this system (3000 j115 A11) is the same as one I mentioned in a post from June 12 (7387A11... Graphics upgradeable?).... and is still hanging out there. Perhaps if Lenovo, or anybody else for that matter, could/would provide SPECIFIC upgrade instructions we could all be enlightened. (In my case I do not own a Lenovo computer but I am hoping to help my sister-in-law with her Lenovo and don't look forward to a major meltdown if the systems are not capable of this, otherwise, simple upgrade.)
    Niether of the 2 previous posters mentioned if they upgraded the PS in thier respective systems prior to the graphics card installation (although ala17 "recently" did.). One had issues and the other didn't. If that should be the first step toward the upgrade, it would be helpful to know beforehand.
    Thanks and good luck. Post back if you get to the bottom of it.

  • Won't boot with new graphics card

    Hi. I have a Pavilion P7-1058uk with a Cleveland-GL8 motherboard and onboard graphics.
    I bought a new monitor which has 2560x1440 resolution, greather than the onboard graphics can cope with, so have tried to upgrade with a Gigabyte GT630 card.
    When I startup, I now get to the blue HP screen but no further. If I startup with F10 or ESC pressed, I get to a black screen instead. Either way, I am invited to press Esc to enter startup but pressing the key has no impact and the computer just hangs. There is a repeated cycle of very quiet clicks which sounds like the HDD drive trying to start then stopping
    If I remove the graphics card and connect the monitor back to the onboard graphics then all is well again (but restricted to 1920x1080 resolution).
    Perhaps stupidly I assumed it was an issue with the power supply (300W) and not enough residual oomph to run the HDD. But having upgraded that to 650W it makes no difference. I also tried downloading NVidia drivers but it won't let me install them because I can only get the computer to work without the graphics card, and Nvidia won't install because it can't detect the hardware.
    Any ideas/help would be much appreciated.
    Andrew
    This question was solved.
    View Solution.

    ADR1978 wrote:
    OK thanks. This card doesnt require a six pin connector but it is interesting that your comment implies that those that do still take power from the motherboard but topped up with the six pin connector. As opposed to taking all power from the six pin connector and nothing from the motherboard. I am not making a statement that equates to your analogy. All cards plugged into a motherboard I/O internal slot are powered by the motherboards power distribution subsystem.  
    One last question - should I have uninstalled the graphics driver for the integrated graphics or is that unnecessary? I have read that the motherboard turns the integrated graphics off when it detects a dedicated card.  I have not done so and am a little wary of uninstalling the existing driver in case things still dont work and it gets tricky to revert back to where I am now.
    Andrew
    No. You won't need to uninstall the driver for the integrated graphics. The OS will only load the driver for the graphics card when one is installed. 
    Regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Pavilion P6-2326s Power cycling with new graphics card

    Hi, I just got a Pavilion P6-2326s from a friend that didn't want it anymore because it was broken. I know a little about PCs so I thought i could fix it and have a spare. It would fire up and run but no video. I figured onboard video was dead and ordered a new cheap video card(EVGA GT610 1GB). I installed it and and no go. the pc just cycles through starting for 3-4 seconds, stops, starts again for few seconds and goes again. It will keep doing this forever or until I hold in power button to shut down. I thought maybe vid card was drawing too much juice, so I removed power supply and put in a known good, 550 watt that I have. Same deal with the start, stop sequence. Tried removing, replcing battery to refresh CMOS in BIOS. Same result with start, stop sequence. Is it safe to assume that Motherboard is probable fried? One othe note, when I got the PC and opened it up, it was the dirtiest PC I have ever seen. It was really caked up with dust and webs. Any ideas out there? Thanks in advance

    You would definitely need to remove the add on video card in order to change the BIOS settings, but if you don't have any video with the video card removed, then you still can't see the BIOS settings, and you are pretty much out of luck.
    You would probably be throwing good money after bad unless you can find the same motherboard on eBay in used but tested and working condition at a very reasonable price.
    Here are listings of the motherboard your model uses.  They may be from different model PC's however that use the same motherboard and again, you may not be able to use W8 because if some of those motherboards came from models with W7, there won't be a W8 product key in the BIOS.
    http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.XH-Joshua-H61-uATX+...
    Then there might be a problem with getting Windows 8 reactivated since the motherboard was changed even if you do manage to find one that came from a PC with W8.
    If it were me...This would be a case where I would strip it for parts, and toss the rest of it out.

  • Issue with new video card

    I purchased a new video card a few months ago to upgrade my somewhat-aged system. when i put it in the slot and started it would load for a second, but then restart in an infinite cycle.figuring it was a power supply issue i purchased a 650W PSU and plugged it in however this did not fix the problem.am i doing something wrong or does my motherboard not support such a new video card?
    CPU
       Intel Pentium D 925
       Presler 65nm Technology
    RAM
       2.0GB Single-Channel DDR2 @ 266MHz (4-4-4-12)
    Motherboard
       MSI MS-7236 (CPU 1)
    Graphics
       Generic Non-PnP Monitor @ 1280x1024
       DELL M990 @ 1600x1200
       512MB Radeon X1300/X1550 Series (Sapphire/PCPartner)
       Radeon X1300/X1550 Series Secondary (Sapphire/PCPartner)
       CrossFire Disabled
    Hard Drives
       156GB Western Digital WDC WD1600KS-00MJB0 ATA Device (SATA)
    The video card is a diamond Multimedia hd 5500 Link:http://www.diamondmm.com/5550PE31G.php

    I am also suffering from the same problem. I have purchased a new video card and when installed the system is continually powering up then off. I have also replaced the power supply with a new 600W unit but still the same. I have checked that I have the latest driver and bios. Any help would be great.
    M/B                        MSI 945PL Neo
    Ram                       2GB DDR2-533
    CPU                       Intel (R) Core (TM) 2 4400 @ 2.00GHz
    Old Graphics card     Nvidia GeForce 6600GT (which works fine)
    New Graphics card    Radeon HD 5670
    Ops system             Win7 32Bit

  • K7D Master keeps rebooting with new vid card

    I had  a GForce 4 ti 4600 128 MB and it ran stable for over a year. I just installed 2 different new videw cards had had the same results with both cards. When I installed the cards, they seemed to flake out and the screen would get worse and worse then the pc would reboot. I tried a GForce 5700 256 by gainward I think and now I have a GForce 5700 256 by MSI and having the same results. I just installed the latest drivers and the pic qit getting distorted but the pc will just reboot randomly after a few minutes of running. Sometimes 5 minutes sometimes 2.
    Please help

    http://www.msicomputer.com/product/detail_spec/product_detail.asp?model=K7D_Master_L
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=344&MODEL=MS-6501
    What are your temps?
    Remember to uninstall previous driver before installing a new one.

  • Problem with new graphic card Geforce GT 610 installed in HP Pavilion a6710in

    I have recently installed the nVidia GeForce GT 610 graphic card. The problem faced by me is especially during playing games, the screen goes black and PC restarts but it works fine with rest of the things. I have disabled the integrated video card as would be if new video card is installed. The problem is still unclear... so please if anyone can help me out with this...

    The GT 610 requires a minimum of a 300 watt system power supply and your computer came from the factory with a 250 watt power supply. When playing games, it is very possible that the card draws more current than the 250 watt PSU can supply. This would cause the computer to crash, go blank, and/or reboot. Please upgrade the power to at least 300 watts.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Qosmio G10 with new graphic card and pcb - Tools CD Update doesn't work

    Hi everybody
    I hope you can help me. Before a few weeks I received my Toshiba Qosmio G10 back from the support, because the notebook didn't work anymore. So I get it back with a new Grafic card and a new PCB. With my Notebook I get a CD which is called update Tool CD-Rom and an instruction sheet, where it says that you have to boot with this update Tool CD-Rom after you had installed the Windows with the reovery CD.
    So I made it, but when I know put the update Tool CD-Rom in and I boot with it, the computer installs something but after a short while there comes a message that it is a different model and that I have to put a button to shut down the Notebook. So i made it but the Windows doesn't start.
    Why is that so? I had everything done which was said on the instruction sheet.
    Please help me

    Hello
    It will be interesting to find out more about this update Tool CD-Rom. Is there Toshiba label? Can you please write what is described there?

  • Screen resolution with new graphics card

    Mac G4 400 AGP (Sawtooth) OS9.2.2 + Tiger
    Hi, I have just updated my old G4 with new HD and new Nvidia GeForce 2MX graphics card. Under OSX everything seems fine but under OS9 the screen (22 Lacie Electron) will only display at 640 x 480 with no other choice of resolutions. I cannot find any drivers other than the Driver Update 3.0v1.1 which gives a message that it 'cannot be run on this computer'.
    The original ATI Rage had extensions but I cannot find anything for the Nvidea card - do I nee to reinstall the OS to have them load?
    Is this lack of resolution normal or can I change it? I only boot onto OS9 to access some older SCSI devices but the screen re is horrible and makes it hard to use.
    Any help or advice welcome. Thanks.
    Message was edited by: AntF

    Hi, AntF -
    The OS 9.2.2 download updater includes NVIDIA drivers (v. 2.4), but they probably would not have been installed if the NVIDIA card was not in the machine at the time the updater was run.
    You can probably get them installed them by re-running the OS 9.2.2 updater, now that the card is present.
    Or, you can extract them manually from the Installation Tome contained in that download update. You can use the utility TomeViewer to extract (expand) any files you want from an Installation Tome on an OS Install CD or download disk image, without running the installer. There are several NVIDIA extensions; since the default view in TomeViewer is alphabetical, you should be able to grab all of them as a group. Extract (expand) them to the desktop, then (while booted to OS 9) drop them into the closed System Folder - Finder will place them for you.
    How to use TomeViewer
    I would do the second, since it is safer (there's no risk of the installer accidentally replacing something which should not be replaced).
    In case you do not have the OS 9.2.2 updater handy -
    Article #75186 - Mac OS 9.2.2 - Download and Info
    After getting the NVIDIA extensions installed, restart. Then use Extensions Manager to turn off (uncheck) the ATI extensions. Restart again.

  • New iPhone with new SIM card - Retrieving data

    My iPhone was stolen, so I had to buy a new one, so it's also a new SIM card. When I connected to iTunes, I thought it would ask me if I wanted to restore with my previous backed up data which would have also included all my contacts, notes, pictures, etc. It didn't. Is there any way to retrieve the backed up data from my old phone and sync it to my new phone?

    Not sure why it didn't ask you to restore from a backup.
    Plug in and open iTunes. Click on the iPhone under DEVICES. Click Restore. Let it restore to factory settings, and then wait for iTunes to prompt if you want to "Set Up as New iPhone" or "Restore from Backup."

Maybe you are looking for