MSI A75MA-P35 DDR3-1866 support?

Hi,
I'm interested in an A75MA-P35. Unfortunately, the website and manual say it only supports DDR3-1600 whereas the "little brother" (A55MA-P35) and basicly all other mainboards with FM1 support DDR3-1866.
Is this a mistake or does the A75MA-P35 really not support DDR3-1866?
Thanks in advance!

Quote from: Mark on 01-October-11, 06:20:53
The memory controller is built into the CPU so that determines what speed RAM is supported.
Now that you mention it, it's pretty obvious. Guess I'm getting too old for this stuff.

Similar Messages

MSI A75MA-P35 (MS 7697) With AMD ATHLON II QUADCORE - Several Beeps

Hi,
I´ve just monted an MSI A75MA-P35 (MS 7697) with a AMD ATHLON II QUADCORE (2.6), and at this time i´ve several beep codes (1 long + 2 shorts).
I´m using AMD Memory (1 slot, 4 Gb, pc3 - 12800 1600mhz, CL9 - 1.5V), that´s all i´ve connected/mounted.
ps - i´m using an Advance Power Supply with 480W.
Any ideas about this?
Regards,

Quote from: Svet on 04-April-12, 00:15:40
what's the exact CPU model?
PSU details?
VGA used?
memory details? brand, vendor, ECC?
And...? Does the system boots and works fine?
CPU - AMD ATHLON II X4 631 AD631XWNGXBOX
PSU - ADVANCE 5100S - 480W
VGA - ONBOARD
MEMORY - AMD MEMORY (1 slot, 4 Gb, pc3 - 12800 1600mhz, CL9 - 1.5V) AE34G1609U2
... and doesn´t boot at all.

MSI A75MA-P35 Signal Lost, No DVI

Mainboard: MSI A75MA-P35 (unknown BIOS - due to no video).
AMD A4-3300 Llano Dual-Core 2.5GHz
WD Blue WD5000AAKX 500GB
Corsair XMS3 8GB
Windows 7 Pro x64
So I built this PC for my grandmother in 2012 and everything has worked flawlessly until this past week; she said the screen went black and a sound came on, so I logged into her PC through teamviewer and the screen would change resolutions every 3 seconds on my end, I was able to update everything (tedious I must say).
Still no video. So I brought her PC over here and tested it with my monitor; no joy on the DVI port, intermittent on the VGA so I did some cleanup in safe mode and then booted it up on VGA and it was working fine. Hooked it up for her; was working fine, then over night same problem appeared.
I do not have a second CPU to test with, but the CPU is actually working (because I can connect through TeamViewer). I'm honestly thinking the board has issues, it's still under warranty, but I wanted to come here and see if anyone else has had similar problems.
Though if I throw an FM2 board in there with a new FM2 APU, do I have to do a clean install on Windows (yes I know you should when you change hardware); I just want to make this as minimal hassle as possible.
Further notes:
No POST beeps
Everything seems to be working fine just no video.
DVI port is hard to connect (bent - though I don't know if it's a factory defect)

Since the screen is black when connected to DVI before Windows even starts booting, I would say what it isn't a Windows issue. I thus highly doupt what a re-install would fix it.
Quote from: midnightwolf76
the screen would change resolutions every 3 seconds on my end
From the sound of it, it sounds like the motherboard (or APU) is unable to detect the Screen frequency & resolution, causing it to try different ones (thus the swapping).
Quote from: midnightwolf76
DVI port is hard to connect (bent - though I don't know if it's a factory defect)
Might be damaged, that could explain the issue. First see if you can find any visible signs of damage. Then check for broken pins being stuck or bent pins on the cable. Might need to get the board replaced or repaired, however check if any of the mods have anything to say about it first.

MSI 880gm-e43 ddr3 1600 support

I recently purchased this motherboard (msi 880gm-e43), and Kingston HyperX 4GB KHX1600C9AD3K2/4G ram kit. However while both are supposed to support DDR3 1600MHz, I only get 1333 with the default configuration.
Do I need to change overclocking settings to get these working? If so how can I do that?
(Btw, SPD shows up to 1333 only, while MSI's control panel applications also has another entry for XMP-1600, which I do not exactly know how it differs).

I though I was able to do it. There was a simple option, which allowed 1600MHz with no issues.
But it turns out that mode comes with increasing DRAM timers. Is there a way to increase the clock speed, while keeping the timers fixed?
(I compared Windows Experience Index scores, it performs exactly the same in both those configurations).
There is this page, but it has no documentation, and I have no idea how to set it up:

MOVED: MSI 880gm-e43 ddr3 1600 support

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=145131.0

I though I was able to do it. There was a simple option, which allowed 1600MHz with no issues.
But it turns out that mode comes with increasing DRAM timers. Is there a way to increase the clock speed, while keeping the timers fixed?
(I compared Windows Experience Index scores, it performs exactly the same in both those configurations).
There is this page, but it has no documentation, and I have no idea how to set it up:

MSI H67MA-E35-B3 not supporting ddr3 1333

Hi,
I recently purchased MSI H67MA-E35-B3 and Intel Pentium G620 processor with Corsair xms3 2x2gb ram kit CMX4GX3M2A1600C9
Ram is not detected as 1333, but it defaults to 1066 in auto settings, if I manually change speed to 1333, pc wont boot and I have to clear cmos.
Enabling XMP in bios displays adjusted dram speed as 1600, but saving and rebooting speed sets back speed to 1066.
I want to run ram at default 1333 speed at least if the board cpu doesnt support 1600.
Also there is some issue with Ps/2 keyboard, its not detected by windows after shutting down pc, some reboots and plugging unplugging keyboards makes it work.

Quote
Ram is not detected as 1333, but it defaults to 1066 in auto settings
Please take a screenshot of the CPU-Z "SPD" view, upload it somewhere and include the link to the image here for comparison.
Quote
I want to run ram at default 1333 speed at least if the board cpu doesnt support 1600.
Actually, according to Intel specifications, native memory support of this processor is restricted to DDR3-1066:
http://ark.intel.com/products/53480
Quote
Memory Types DDR3-1066
No word about DDR3-1333 support.
Quote
if I manually change speed to 1333, pc wont boot and I have to clear cmos.
Enabling XMP in bios displays adjusted dram speed as 1600, but saving and rebooting speed sets back speed to 1066.
I want to run ram at default 1333 speed at least if the board cpu doesnt support 1600.
Also there is some issue with Ps/2 keyboard, its not detected by windows after shutting down pc, some reboots and plugging unplugging keyboards makes it work.
What is your current UEFI/BIOS Version?

A75MA-P35 and ganged mode

Hi to all,
I've got this problem: I'm using a A75MA-P35 motherboard that seems to work fine, but in the first post message, about DDR mode, I read "GANGED MODE, 64 BIT".
Well, I use 2 sticks of Kingston DDR3 memory (freq. 1333 mhz). In similar boards I always see "ganged, 128 bit". can you please explain me the reason of those 64 bits (usually 64 for unganged mode, 64 + 64 for ganged)?
I tried two versions of bios (1.10 and 1.20)... same values
thanx for support
Paolo

Great!!! I supposed it was not a problem but a characteristic of my system...but did not find anything about this issue. You were able to do this... great.
by the way I repair and assembly pcs as a Job, and when I learn something new I'm happy
thanx again for your time and availability
peace,
Paolo
PS: I use this system as a "portable" little home audio recording station... reason, cubase ecc with an M-AUDIO Fast track USB.
This is the first time I use AMD for audio...no latency... good as a much more expensive INTEL

Problem with Bios 2.0 MSI A75MA-G55

hello, I need help ....
A few days ago I did the update the BIOS of my MSI-A75MA-G55, which is 2.0 and he has presented problems. It has a processor (AMD A-8 3870K) before trouble could overclock to 4.0GHz, but now it goes from 3.6ghz: (... By increasing to over 3.6ghz pc does not start and I have to clear the CMOS for reuse ... the second problem is with the GPU hd6550D now I can not run any game at medium quality such as "far Cry 3" or "Bioshock Infinite" and before if I could .... the previous BIOS version was the V13 or 1.3 which everything worked.
The characteristics of my pc are:
- MSI Motherboard-A75MA-G55 (MS-7696)
- 3870K Processor A-8
- 2x 4GB Corsair Vengeance DDR3-1333 (667MHz)
- Hard Drive WD 750GB 64MB Cache
- Thermaltake CLP0575 Frio OCK
Thank you in advance ...!
Sorry do not know much English ...!
Note: I did a BIOS flash, with the tool provided here, to downgrade the BIOS version and I could not because at the end and restart the PC had always the same version.

As the problem is only bios related from your report tell MSI about it so the issue can be fixed: >>How to contact MSI.<<
Quote
Note: I did a BIOS flash, with the tool provided here, to downgrade the BIOS version and I could not because at the end and restart the PC had always the same version.
Downgrading is not possible: Quote from: http://www.msi.com/product/mb/A75MA-G55.html#/?div=BIOS
* There is no way to reflash back to BIOS version 1xx if you already updated to version 2xx

A75MA-p35 Raid 1 Install Win7 drivers not found

Hi all,
Looking for a bit of help here, Problems installing Win7 Home Prem on a mirror raid. I followed the PDF manual uk.msi.com/product/mb/A75MA-P35.html#/?div=Manual to the letter for how to create the raid, But the issue is cant seem to find any drivers to detect the HDDS, Or The DVD drive for that matter.
I have:
Set BIOS SATA mode to : Raid
Used the BIOS CTRL+F Option, to create the raid. ( RAID Option ROM utility... )
Booting from Win7 CD, Its asking for drivers for the drives The PDF above says use the driver from >
: \\ChpSet\AMD\Packages\Drvers\SBDrv\SB8xx\RAID\
(and then, please select a folder whch was classfied accordng to OS.) "
This I have tried, But Its not listed due to the "Incompatible driver" Checkbox.
I have tried forcing it to install this driver, and others from the CD/Net But with no luck
Anyone got any clues?
Thanks

Link worked.
Thanks for the help. Much appreciated.
Tis all installing now.
Confused to why the drivers from the motherboard CD didnt work tho?
@Xmad.
The USB stick was showing up fine pal, Just the drivers I was throwing at it, Didnt want to work. I did try installing the other drivers to see if they worked anyway with no luck.
Sigh, whilst writing this. More errors on screen :( Back shortly!

Hello Everyone ;P [ Does The MSI DKA 790 GX Platinum support 20 GB IDE HDD ]

Hi MSI Forum Elites
I am Wondering does the MSI DKA 790 GX Platinum support IDE 20 gig Hard drives.
OS: Windows XP Pro with sp2 x86 [MSDN original]
Installed RAM: 2 GIGS [Patriot - 2GB DDR2 PC2-6400 800MHz] [dot] takealot [dot] -com/computers/computer-components/patriot-2gb-ddr2-pc2-6400-800mhz,9600228
i have an OLD formatted 20 gig HDD with me and i wonder
there is A BIG yellow thing on the side below the SATA II ports
Thanks
STEAM_0:1:67164036 - Steam ID
Steam Profile : /profiles/76561198094593801

Quote from: badboy2k on 27-June-13, 21:13:01
it should do as it supports upto 200GB IDE hard drives so i wouldn't think a 20GB one would be any problem (just one question here where on earth did you get a 20GB IDE hard drive as i haven't seen one of them since around 1998?)!
i struck a Deal with a Guy on Gumtree {http://www.gumtree.co.za/fp-computers-software-in-capetown-westerncape/c9199l3100001}
he wanted 2 Sticks of DDR2 RAM and he gave me 2 GB RAM DDR3. includin a 20 gig HDD and its a western digital.
Pls add me on Steam. so we can discuss further.
thanks
STEAM_0:1:67164036
Steam Profile : /profiles/76561198094593801
P.s What kind of Cable do i need to wire from the Yellow thing to the BIG power structure on the HDD.
on the hdd is a special cable thats only used now for inside desktop chassis etc.
do you know anything. maybe post upclose photos for me so i can post on gumtree.
its a south african site for ppl selling and buying unwanted stuff..
one man's junk is another man's treasure

Eithernet problems with A75MA-P35

I am having trouble with the network adapter on my A75MA-P35 FM1 AMD A75 (Hudson D3). I purchased the motherboard on March 9, 2012. It has been working fine until today. I am running Windows 7 64bit. The network connection would be on for a minute when the computer boots but then windows shows that it becomes disconnected, but the lights on the port still remain solid on. Windows driver says that the drivers are working fine. I swapped network cables that is working fine with another computer but the problem still remains on this computer. Is there a utility to test the network port
Thanks

Please see my post here:
https://forum-en.msi.com/index.php?topic=159490.0
I am experiencing the same problem. You can also see the problem described in the newegg review for this board. Note that the A75MA-P35 and the A55M-P35 are the same boards except for the chipset, and they even use the same BIOS.
For now, I suggest you use a PCI network card.
I don't think MSI can fix this with a BIOS, I think they're going to re-release it with a new hardware revision.

Lenovo T530 not working with DDR3-1866

After I installed the Corsair Vengeance CMSX8GX3M2A1866C10 Windows started giving different errors.
Does lenovo not support ddr3-1866?

Lenovo does support Intel-XMP profiles, included SODIMM's running at 1866MHz.
I have experienced the same problem with Corsair branded memory. The Kingston memory running at 1866MHz as well as the memory running at 2133MHz work flawlessly.
ThinkPad's seem to dislike the Corsair memory.
Thinkpad® T430 | Intel® Core™ i7-3520M | 8GB HyperX PnP DDR3-2133MHz | Nvidia® NVS™ 5400M | 256GB Plextor® M5 Pro

A75MA-P35 C6 Mode Problem

Hi,
Just purchased a A75MA-P35 and amd 3500 Lano cpu and 8GB Corsair ram
And have a problem with my A75MA-P35 -( Problem when enabling C6 Mode in bios.)
Motherboard already had latest bios 1.2.
MSI Install CD was full of errors when i tried to install drivers,(totally corrupted,,(screwed) and lots of scratches on the surface.
I just downloaded from the internet drivers needed but still a pain.
When i enable c6 mode in bios and save and exit, Win7 starts after a few seconds, the computer Reboot's and Reboots, etc.
As soon as i disable C6 Mode, computer start's fine.
is there a Problem with the bios and C6 Mode
Also CPU temperature in win7 reports 8c , i think is a bit on the cool side, is generally not a problem, but CPU fan never changes speed in windows.
If i run a game or something then the CPU is in fact red hot, simply because the temps being reported in win7 are only 8c and the computer mobo thinks the fan speed
doesn't need to go any faster.
I have the fan speed set to increase when the CPU hits 40c , the lowest temp setting in bios but the CPU fan never changes speed.
Don't know if its just my motherboard or a general problem with this mother :bonk:board.
Any thoughts or help would be appreciated..
Many Tks..
https://forum-en.msi.com/Smileys/msi/bonk.gif

Ok svet tested beta bios E7697AMS.14A
Sorry to tell you that Reboot Loop error when starting win7 is still there in Bios test E7697AMS.14A
Tested with C6Mode enabled (Reboots when starting win7)
Tested with C6Mode Disabled (Reboots when starting win7)
Tested with svm Disabled ( Reboots when starting win7)
Tested with cool and quiet Disabled (Reboots when starting win7)
Windows 7x64 Reboots after about 3 seconds when you see the win7 flashing icon in center of screen
and will continue to repeat Reboot etc.
So it looks like bios E7697AMS.14A is worse than the Latest Official Bios 7697v12.
We tried svet, i will pop back here every day to see if we can get a fix.
Many tks svet..
The Test bios E7697AMS.14A has been installed correctly in dos mode , bios reset with jumper on motherboard before testing E7697AMS.14A.

Does GTX295 VGA work with MSI Neo P35 mainboard?

I have a MSI Neo P35 mainboard (BIOS 1.A0) and GTX280 VGA. I think about changing the VGA to GTX295, but don't know if it will be compatible with my MB. Has anybody tested it yet? Or any information/thoughts?

The P35 has no PCI-Express 2.0 Support. The video card should be downward compatible to the older standard, however, you may have some slight performance losses due to the bandwith limitations of the PCI-Express 1.0a Standard.
In short: The card should work. Just make sure that you PSU is strong enough (suffiant current limit (A) on the +12V voltage rail. Post information about the rest of your system and have a look at the PSU sticker to write down the main specs (brand, model, current limits (A) on the main voltage rails (12V, 5V, 3.3V).

A75MA-P35 & Panel Audio Connector Help

Can anyone help me with these front panel connectors on my friend old case, all the cases i've ever done had block connectors that just fitted on the pin header but this has the connectors separate. The case connectors are the following.
Speaker R
Return L
Return R
Mic Bias
Speaker L
Mic In
Gnd
And the new A75MA-P35 motherboard is the following
Where do the case pins go on this pic above.

http://www.intel.com/support/motherboards/desktop/sb/CS-015851.htm
Edited:
Went to the website and verified:
1- Mic
2 - Ground
3 - Mic Bias
5 - Rt HP
6 - Rt Return
9 - Lt HP
10 - Rt Return

MSI A75MA-P35 DDR3-1866 support?

Similar Messages

Maybe you are looking for