Msi A88 GX45 with Amd A10 7850k Random Freezes

i had frezes randomly sometimes one a day sometimes 5 times in 2 hours. it doesnt matter its on heavy load or normal load.
My Temps Are From Msi COmmand Center ;
CPU : 40 Degree idle - 50 Degree Max on load.
Motherboard : 35 Degree on idle - 42-45 Degree on load.
System Specs ;
Msi A88 GX45
AMD A7850k
Kingston Hyperx Beast 1600 Mhz x 2
Ati Saphire 5770
Cooler Master 650W GX series Bronze Psu (Single Rail 52A)
Samsung 128 gb SSD + 1 Samsung HDD + 1 WD HDD
Zalman Z3+ Case With 5 Akasa Viper Fans And Akasa Venom Cpu cooler.
Operating System is Win 8.1
Before Here What i do ;
i bought pc 4 weeks Ago first i bought i had Asus a88xm-a motherboard it has freezes too Because i changed my Mobo to Msi Still have Freeze
i tested memories with memtest and Windows Memory diagnostic tool
i had 450W PSU i changed it to 650 Cooler Master
i installed drivers are updated.and Updated bios
i tried to reinstall Windows 5 times still freezed
my bios working on factory settings nothing changed.
i tried to use Memories XMP profile 9-9-9 1.65 V and its Auto Profile 1.5 V and i tried to set 11-11-11 1.5 V Manually nothing changed.
i tried to replace my graphic adaper and just use my Cpus Gpu nothing changed
Except of Theese ;
i find little solution but i didnt like this soluotion :
When i disable C6 state and amd cool and amd cool and quite feature from bios my computer Works nearly 3 days stable without freezes in this 3 days i just got i BSOD it has _Watchdog_ just 1 time .
Cos of disabled c6 state i cant use Turbocore and power saving features. my cpu is always working on 3.7 mhz without c6 state and i didnt liked this situation ok maybe it solved my freezing problem but still something is wrong help pls

Quote from: Nichrome on 07-September-14, 22:47:54
Hi,
I think AMD chips has pins on the CPUs not sockets right?(correct if not). Take CPU out and look for bent pins, as if it fails to work properly in 2 different boards then there is something wrong with it. Use magnifying glass and bright light to see any imperfections.
I concur, if it's doing the same thing on 2 different boards, I would look at the chip as the culprit. I would test my RAM and PSU also.

Similar Messages

[Solved] radeonsi: only Software Rendering with AMD A10-7850k APU

Hi,
I have a new computer with an AMD A10-7850k APU.
I installed Arch Linux as usual and now get only Software Rendering with the open source drivers.
$ glxinfo | grep vendor
server glx vendor string: SGI
client glx vendor string: Mesa Project and SGI
OpenGL vendor string: X.Org
Xorg.0.log
http://pastebin.com/Pi1rCW5n
dmesg | grep drm
http://pastebin.com/qx7Re1fv
I am in the video group and I have no nomodeset in my boot entry.
Is this APU not yet supported for Hardware Rendering with the radeonsi drivers or do I miss anything?
Thanks in advance for any help!
Last edited by jollafan (2014-09-26 12:53:20)

glxinfo | grep vendor says very little about software / hardware rendering.
try grepping for renderer or OpenGL
$ glxinfo | grep vendor
server glx vendor string: SGI
client glx vendor string: Mesa Project and SGI
OpenGL vendor string: X.Org
$
$ glxinfo | grep renderer
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
OpenGL renderer string: Gallium 0.4 on AMD RV770
$
$ glxinfo | grep OpenGL
OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD RV770
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.4.0-devel (git-23247e8)
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 10.4.0-devel (git-23247e8)
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 10.4.0-devel (git-23247e8)
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.0
OpenGL ES profile extensions:
$

MSI P67A-C45 with 4x4Gb Corsair Vengeance = random freezes in bios

Ok here is the problem i hope you guys can help me with. I recently bought the following rig:
- MSI P67A-C45 Motherboard
- 4x4Gb Corsair Vengeance memory.
- MSI N560GTX-Ti Twin Frozr II/OC
- Core i7 2600K
I am having the following issues:
Whenever i put in all the memory, the PC won't boot, it hangs even in the BIOS (at random pages). Everything seems to run fine (except for a minor detail which i will mention later) with 12 Gb installed (3 dimms that is). I have tried changing the voltage to 1.65v but this doesn't change anything. With 12 Gb (or even only 4Gb) installed there is only one weird thing happening:
Whenever the pc wakes from hibernation i get the following error:
“Your system's firmware did not preserve the system memory map across the hibernation transition. If you proceed with resume, your system could behave in an unexpected manner after resume completes. It is recommended that you save all your data and reboot after system resume finishes. Kindly check for a firmware update with your system vender as it may fix this problem."
Then after clicking resume it says i can't resume from the saved state and that it will be discarded (effectively doing a clean boot of the OS).
Can these two problems be related, and if so, is it a hardware problem or some BIOS settings i can try?
Any help would be greatly appreciated.

Quote from: Bernhard on 05-May-11, 13:51:46
1. Have you tested your mem sticks individually with memtest ? There is always a chance of a defective module.
2. Test the mem at 1333. Insert only 2, set it to 1333 manually in the BIOS, save and switch off. Add all modules and see if it boots.
3. You may also want to reseat your CPU, whilst it's out, check the CPU contact pads for indentations and see if there are any pins on the socket that are bent.
1. I have tested with 1 mem stick, then with 2, then 3 and then 4 (memtest from bios seems to be the only thing not crashing with 4 mem sticks). So i have not tested everything individually, but in my opinion this should be thorough enough.
2. I have done this exact thing but then with 3 mem sticks, only adding the last one when switched off, then turning it back on again. I will try with the two so in dual channel, this might make a bit of a difference.
3. I have reseated the CPU once, it is not a fun thing with the Big Shuriken cooler i have , i'll try this as a last resort.

On AMD A10-7850K some randome lines appearing on the section of tabs.

On AMD A10-7850K + Win7 64bit, some randome lines appearing on the section of tabs. (Looks like a graphical bug)
Reinstall, new driver... still randomly happened.
HW accelaration is now set to off and it looks okay now.

Kedves Tomi55!
Rendicsek! Hozzá vagyok szokva az angol-nyelvű helpdesk-hez.
Én is dolgozom, de még így is elég gyors a reakcióidő, köszönöm.
Szóval... Ha kikapcsolom a HW-es gyorsítást, akkor a probléma megszűnik. Nincs gond a memóriával, nincs gond az APU-val sem. Minden szépen fut rajta, egyedül a böngészőben jelennek meg néha random vonalkák a fölső sorban, ahol a tabok vannak.
Most per pillanat ki van kapcsolva a HW-es gyorsítás a böngészőben és nincs grafikai hiba. Ha bekapcsolom, majd újraindítom a böngészőt, akkor a hiba azonnal előjön.

Upgrade cpu with AMD A10-4600M in HP Pavilion dv7-6101er (lz661ea) FS1 and FS1r2 sockets

Hello Friends. I owner HP Pavilion dv7-6101er (lz661ea) and i want to upgrade cpu. Current CPU is A6-3410MX and socket FS1 i want replace for AMD A10-4600M socket FS1r2. But i don't shure will new cpu working in my notebook? I asked this question in ADM support, they said what both CPU is compatible, but need software support in bios of specific models of notebooks. I can't ask this question in HP support because free support time of my model is ended. Please prompt - BIOS of my notebook will support a new CPU?
This question was solved.
View Solution.

n00x wrote:
All of what you wrote - I understand that. But understand and you - the replacement of the processor is required because performance lacking. For a new book i haven't money. You are employee of HP and really can help asking the question to someone of your colleagues who will know exactly whether to run the new AMD processors in my notebook. All my notebooks have been made HP I always helped the company - buying its products, help you and me now. I'm not asking for much - just a concrete answer - will work or not?
No!! That is where you are wrong. I am not an HP employee.
Very few of us here in the forums are HP Employees. Those that are, with very few exceptions, are here volunteering their own time to help owners of HP products. This is a peer to peer forum where owners of HP products share their time and expertise helping others who need help. We are here to help. We are helping as volunteers.
There is no concrete answer on this. Sometimes an upgrade to an unsupported CPU will work, but most often it will fail. Read my previous posts. The risk of whatever currency you use in your country to purchase the new CPU is yours, not mine nor HP's.
Here is a solid answer for you...Use a CPU that is in the list in the Maintenence & Service Guide and your upgrade success chance will go up dramatically. I cannot say your upgrade success will be guaranteed because there is always the chance that you may break something during assembly/disassembly or be unaware of a critical assembly/disassembly procedure and inadvertently destroy your new CPU.
If you want a high performance CPU and chipset in a laptop then choose well when making a laptop purchase. Laptop/notebooks are actually not meant to be upgraded.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

MSI NF750-G55 with AMD Phenom II X4 965 Black Edition bundle from NewEgg

I purchased this CPU/Mobo bundle from NewEgg recently and am having a hard time getting anything to work. Here are the components I am using:
MSI NF750-G55 mobo
AMD Phenom II X4 965 Black Edition CPU
2x4Gb GSkill F3-10666CL9D-8GBSR DDRIII ram
EVGA GeForce GTX550 Ti SLI ready graphics board
ZUMAX X3 Series ATX 650Watt power supply
NZXT M59 ATX Mid tower case
Now to the problem - no POST
I have double checked the CPU seating and installation and its correct, have tried both on board video as well as the GeForce, and no signal to the monitor. The 4 blue ASP power led's do light up, and the CPU fan spins, but only for a few seconds. Then it shuts off, then restarts, and keeps cycling like this. Have tried with no memory installed, same issue. I have seen several entries on forums for no POST on this mobo. Can anyone help me here? Am I looking at a bad mobo or what? Currently have it out of the case on a non conductive surface.

3th time:
Quote from: Svet on 02-July-11, 06:34:11
you didn't answer:
Quote from: Svet on 02-July-11, 04:32:55
is there any beeps?

MSI P35 Neo-F (MS-7360): Computer randomly freezes while playing games

Hi there,
I have reached the end of my technical knowledge right now and I'm not even sure if this area of the forum is appropriate. The problem:
While playing higher-end games like Crysis 2, Anno 1404, Mass Effect 2 etc. my computer randomly freezes and the last few milliseconds of sound are being looped on my speakers (kind of like a buzzing sound).
By "freezing" I mean that my computer becomes unresponsive to any action other than pressing the Reset-Button or holding down the Power-Up-Button (no reaction to Ctrl+Alt+Del, Alt+F4, Alt+Tab, no mouse movement... you get it).
There's no exact timing as to when these freezes occur. The fastest freeze happened after less than a minute of playing a game, slowes one (just today after switching to my newer case with better cooling) took about 2 hours.
This freeze only occurs while my System is under load. No freezes while browsing the web, using office programs, listening to music or watching videos.
System Specs:
Mainboard: MSI P35 Neo-F (MSI-7360)
CPU: Intel Core2Quad Q6600 @2.4GHz
RAM: 4x 1GB DDR2-800 Corsair XMS2
Graphics: Gainward GeForce GTX 560 Ti, 1GB GDDR5 VRAM
PSU: Antec High Current Gamer 620W (upgraded from Xilence XP600, 600W)
New CPU Cooler: Arctic Freezer 13 Pro (upgraded from OEM Intel Boxed Cooler)
New Case: Zalman Z9 Plus w/ 4x 120 mm Fans (Upgraded from a Case with only 1x 250mm side Fan)
2 Western Digital HDD (1x 2TB, 1x320 GB)
1 DVD Reader/Burner (unimportant for that error I guess)
OS: Windows 7 Ultimate 64-Bit
2 Screens: 1x 24" Asus VS248H and 1x 21" LG Flatron Wide W2240T
Since this error is bugging me for quite a while now and since this is not the first forum I'm trying to get help from, here's a list of steps i already took to get rid of it, obviously to no good use:
reinstalled games where the freeze occurred
updated all Drivers (including cleaning old versions in safe mode; also tried older drivers)
updated BIOS to v1.A0
Reinstalled Windows
bought new Case and CPU Cooler to improve Air Flow/Cooling
checked Seating of all components (took out, cleaned, reapplied thermal grease where neccessary, re-inserted)
cleaned old case of dust (obviously no problem in the new case, which is 2 days "old")
ran 7 sequences of Memtes86+ without any errors
ran Prime95 without any errors for about 45 Minutes
ran Furmark for 15 Minutes under full load (burn-in test) without any problems, even though my graphics card hit the 100°C frequency-cut level
ran Furmark and Prime95 simultaneously without any problems
took records of component temperatures and system voltages without noticing anything unusual (at least not after i switched to the newer PSU, which is about 1 Month old - yet didn't resolve the problem)
tested with cyclic removal of 1 RAM device to further rule out RAM malfunction
tested with only 2 RAM devices in dual channel mode (Slots 1 and 3)
tried to reduce RAM clock (800 MHz --> 667 MHz) to no avail
checked S.M.A.R.T. values of HDDs, no issues reported
tested without any background programs
raised/lowered voltages to RAM, CPU and Chipset in BIOS to increase logic circuit stability/decrease heat production
I need to mention: After I transferred my system to the new case, i was able to play longer than average compared to my old case. So I am guessing that improper cooling was part of the problem, yet improving cooling obviously didn't resolve it.
Since these freezes are really annoying and nobody could help me resolve this so far, I'm hoping to find some new ways of narrowing down the problem or even getting rid of it here.
Regards
Sebb

Quote from: Bernhard on 10-July-12, 13:15:30
Lets be realistic. A system with a 560TI is recommended to have a around 31Amps under full load, a CX500 would be sufficient.
Have you monitored your CPU and memory utilisation ?
As suggested before, test the GPU in another computer to see if the behaviour is the same.
Whew, I thought for a second there that my common sense had left me when I saw that 60-Amp-Post ^^
Yes, I monitored CPU and RAM usage, there is no recognizeable pattern to be seen and it almost never happens under full load.
I will see if a friend of mine can test my GPU on his computer, and I will test it underclocked right away.
Though one more question regarding that: Should I only underclock GPU Core Clock or both Core and RAM clock?

Why does my new MacBook pro retina with 16gb ram keep randomly freezing

Why does my new MacBook pro retina with 16gb ram keep randomly freezing

Hi ..
A new Macbook Pro should not randomly freeze.
You have 14 calendar days from the time your items are delivered to initiate a return as noted here.

Does the MSI FM2-A55M-E33 work with AMD A10 6800K ?

So I am trying to build my own pc. I don't want my money to be wasted so asking you will it work ?
Do I need to update bios for that ?
I researched about it on the internet. It said that these fm2 boards (except the latest one) do not support richland series.They only support those trinity series. For richland, they need to update their bios. So do I need to do that for this thing? If yes, how do I do that ? Would the system turn on without those bios ? (asking because if it will turn on, then I could update bios from this website. But will it turn on without the bios?) I am totally confused. And also this is my first time building a pc. Please Help

On some boards it is possible without (on some it won't even post). The board will then post but show a message about a non supported Richland cpu being used and that an update is required (board will be stuck in such message loop).
Now one can take a bootable DOS USB stick and put the bios update .exe on it you extracted from this archive: http://www.msi.com/service/download/bios-22557.html
Then enter the bios, go to save and exit and select your USB stick in the boot override section. The system will now boot from the USB stick and you're able to run the .exe
Remember: Go to save and exit and at the boot override choose the bootable USB stick. This will exit the bios and the system will boot from the device you selected. Otherwise you will get back to the message loop.
If the board doesn't post this trick is not possible. Either you need a trinity cpu then to update to a Richland supporting bios or ask MSI/a pc-shop to flash it

Anyone using msi kt4v 6712 with amd 3000+

just wanted to know if anyone has an msi main board kt4v 6712 and is using an amd athlon barton 3000+ and ifyou are having any problems with it and if it works with that board the updage for the bios says it does

thank you bro thats all I needed to know for now only thing I have to worry about is getting the cpu cooler through the mail :-)

Diagnosing No POST, No Beep MSI 790GX-G65 with AMD Phenom X4 955 BE

Last night I came home to a ceased PC with a frozen screen. PC has been working fine for over 2 years, but CPU has been running a bit hot of late (60C) with occasional BSODs with some ATI driver reference. Updated video drivers a few times. Suspected overheating CPU or ATI. Never overclocked it.
Specifications:
CPU: 3.2Ghz Quad-core AMD Phenom X4 955 Black Edition
M/B: MSI 790GX-G65
BIOS: Don't know. I upgraded it at one point.
Memory: 4x 2GB DDR3 Apacer (2GB UNB PC3-10600 CL9). Don't have more info right now.
Video: On-board.
Hard-drives: 1x 500GB Western Digital (Removed)
Peripheral Devices: PCI Wi-Fi card (Removed)
OS: Windows 7 Ultimate x64
PSU: ISO-500PP Switching PSU, Max Output 420W rated 23.0A @ 12V
Symptoms:
Black screen with blinking monitor LED (connected via DVI).
All 5 blue M/B LEDs light up.
No POST.
No Beeps (connected PC speaker to JFP2 according to maunal)
No peripheral activation, e.g. no keyboard lights / mouse.
All funs run (incl. PSU fan).
If USB keyboard is plugged in when powered, keyboard function LED lights up for a second, then dies.
Suspected Causes:
Broken CPU
Broken PSU. It is the only component I skimped on with this system (420W), but I was saving money and didn't have a video card DVD drive or anything fancy connected. Worked great until now.
Things I have tried:
Left it overnight.
Reseated CPU and heatsink (did not reapply thermal paste).
Cleaned heatsink under CPU Fan.
Removed PSU and M/B from case.
Disconnected everything.
Laid M/B on anti-static bag with only power supply and monitor via DVI cable.
Removed all RAM. Starting produces no beeps from PC speaker (via JFP2). Suspect broken CPU.
Some things I have not tried:
A different PSU
VGA output
Different AM2 CPU (don't have one)
New thermal paste
Clearing CMOS and removing battery. Not sure how to do this (do I need to remove CMOS battery and hold clr CMOS button for 60s?)
Since everything on the M/B lights up (incl. blinking Wi-Fi LED when it was connected), I suspect a bricked CPU.
Where do I go from here?
(edit: added keyboard LED symptom)

@Fredrik:
Yes, I tried with 1 RAM DIMM in different positions. I connected a PC speaker and my standard speakers via the audio jack (some new M/Bs apparently output to it). I don't have access to another compatible system to try my CPU on. Very infrequent thunderstorms.
@cronnin:
1. Placed M/B on unpainted wooden table. Good point about the anti-static bag - I forgot that it conducts. No change in symptoms.
2. Everything is disconnected. I've tried 1 stick of RAM in different slots and connected a CRT monitor via VGA. No video out.
3. I connected an old PC speaker to pins 2 and 8 of JFP2 and plugged in normal speakers via green audio jack on M/B. I can't get it to produce any sound whatsoever.
4. FSB overclock switches are both ON.
5. I pressed and held CLR_CMOS for 10 seconds while ATX power was connected and system unpowered. Didn't touch the battery.
More Things I Tried:
Used a multimeter to test my PSU ATX outputs on the board when powered on. I get a steady 12.35V, 5.2V and 3V at the M/B power connector. Starting to think the PSU is OK, but still can't be sure. If there was a lack of current, wouldn't the voltages start to break-down?

MSI NF980-G65 with AMD Phenom II X4 965 Black Edtion 140 Watt

Do I need to update the bios before I install OS? I have tried 2 of these mobo's and both would shut down during XP installation. The ram I was using was G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666). The board would not restart unless I cleared cmos and that didn't always work. Needed multiple tries sometimes. When it did restart It would show "bad cmos checksum" If it's just a matter of flashing the new bios before I install the OS, then which bios should I use as there are 3 listed on MSI for that board? (1.0, 1.1 and 1.2) Any help or suggestions would be appreciated.

Quote
Do I need to update the bios before I install OS? I have tried 2 of these mobo's and both would shut down during XP installation.
What PSU you use? VGA? Read >>Posting Guide<<
Ensure that CPU heatsink is properly installed also:
• Verify that CPU is not exceeding recommended temperature by checking the CPU temperature in the BIOS under PC Health status
•    Check CPU heatsink/fan is properly installed
   •    Verify that any cover over the thermal interface on the bottom of the CPU HSF is removed
   •    Verify that CPU HSF is recommended for your CPU
•    Check for CPU overclocking which may cause overheating
   •    Check CPU FSB clock
   •    Check CPU Vcore voltage
•    Check computer case for proper ventilation
Check BIOS temp reported in BIOS and check CPU operating voltage.

Has anybody else been having trouble with there iPhone 4s randomly freezing and only unfreezing to shut down because the battery is dead?

I have been using my iPhone 4s a lot mainly for email and to text my friends. I have also noticed that my iphone seems to have recently begun freezing up. It's done this a number of times, and ive only noticed it happen after i updated the software to 5.1 version. Has anybody else been having this problem? I have takin good care of my iphone, and I care to know why my 300 dollar phone is currently being out done by any 20 dollar walgreens phone that I have had in the past.

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

Which Video Card will Work out of Box with P7-1240 Desktop with Win 7-64bit & AMD A10-5700 CPU?

Hi Folks,
I'm new here and have already searched for solutions. I have P7-1240 Desktop purchased new in June 2012 with Jasmine MSI-MS-7778 motherboard, AMD A10-5700 quad core, 10 MB ram and Windows 7 64-bit. I'm trying to install a graphics board so my son can play some games that he currently must play on low resolution using the integrated graphics.
I updated my PSU to 600 watt Corsair and tried GTX 750 Ti and GTX-660 cards to no avail (the computer won't boot past HP splash screen). I've also tried AMD Radeon R7-265 card but couldn't even boot to the HP splash screen. As I understand, HP offers no BIOS updates for Windows 7 (I read here that one guy loaded a BIOS update for Windows 8 on his Windows 7 machine and it worked, but I am too chicken to try that).
I just want to put this issue to rest. So my question is simply this: Does anybody know of ANY graphics card series that will definitely work OUT-OF-THE-BOX in my machine with the stock BIOS and PCI-Exp 16 Gen 2 slot? I was going to try a GTX 500-series card next. But I wanted to get some advice first, since I won't be able to return it if it doesn't work.
Thank you!
Gary
This question was solved.
View Solution.

Hi,
Graphics card compatibility with the BIOS levels in PCs is not the only factor. PCI-E slot version compatibility both upwards and downwards would be another factor. Manufacturers will at times view standards differently and hence design their graphics cards to function differently compared to the same card being made by a different manufacturer. Manufacturers may also design graphics cards to only work with their motherboards. Bottom line is that not every graphics card will work in every PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Msi KT4AV with AMD ath. 2500

hey hello there
Here is my question I m planning to buy msi 6712 KT4AV with amd athlon 2500 (333mhz 512 kb)
bios update 5.1 run ok
but Athlon(tm) 2500+ see
what is my problem ---->(tm)can't see athlonXP 2500+
my english language small

okey tomorrow
because goto my house tomorrow
my office now

Msi A88 GX45 with Amd A10 7850k Random Freezes

Similar Messages

Maybe you are looking for