Msi after burn need help

hi all my name is gio.
i have nvidia 9800 gt 1gb. pc have power suply p4 - 400wat
normaly withaout msia after burn software video cards cooler roll very slow.
video card need extra power with 6 pin. itested:
1 withaut extra power cooler rool fast but ofc pc not work.
2 with 6 pin extra power it rolls very slow but computer strarts normayly temp goes over 70 celsius
cause i use msi after bur i only use manuel fan speed control and it on 70 point cooler rool fast but
without gaming tem is very good it less than 40 c 37-40
but wehn i play game not mean extra good games i mean  contrac wars on facebook and battle for middle earth 1 strategy game after 30 40 min pc auto rebuting i think cause video card burning so what to do?
decrease core clokin  from softwawre?

Field   Value
Graphics Processor Properties   
Video Adapter   EVGA e-GeForce 9800 GT
BIOS Version   62.92.69.00.88
BIOS Date   12/23/2009
GPU Code Name   G92GT
PCI Device   10DE-0605 / 3842-C981  (Rev A2)
Transistors   754 million
Process Technology   55 nm
Bus Type   PCI Express 2.0 x16 @ 1.1 x16
Memory Size   1 GB
GPU Clock (Geometric Domain)   301 MHz  (original: 600 MHz)
GPU Clock (Shader Domain)   602 MHz  (original: 1500 MHz)
RAMDAC Clock   400 MHz
Pixel Pipelines   16
Texture Mapping Units   56
Unified Shaders   112  (v4.0)
DirectX Hardware Support   DirectX v10
Memory Bus Properties   
Bus Type   GDDR3
Bus Width   256-bit
Real Clock   100 MHz (DDR)  (original: 900 MHz)
Effective Clock   200 MHz
Bandwidth   6400 MB/s
Architecture   
Architecture   nVIDIA Tesla
Streaming Multiprocessors (SM)   14
L1 Texture Cache   16 KB per multiprocessor
L2 Texture Cache   128 KB
Local Data Share   16 KB
Theoretical Peak Performance   
Pixel Fillrate   4816 MPixel/s @ 301 MHz
Texel Fillrate   16856 MTexel/s @ 301 MHz
Single-Precision FLOPS   134.8 GFLOPS @ 602 MHz
24-bit Integer IOPS   134.8 GIOPS @ 602 MHz
32-bit Integer IOPS   27.0 GIOPS @ 602 MHz
Utilization   
GPU   0%
Memory Controller   3%
Video Engine   0%
nVIDIA ForceWare Clocks   
2D   GPU: 300 MHz, Shader: 600 MHz, Memory: 100 MHz
3D   GPU: 600 MHz, Shader: 1500 MHz, Memory: 900 MHz
Graphics Processor Manufacturer   
Company Name   NVIDIA Corporation

Similar Messages

  • Core and memory clocks freeze after gamestream need help

    hi everyone need help with this as i dont know whether my card is faulty and msi support keeps giving me an error when i ask a question. when i start gamestream  my core clocks go to 1113.5 and memory gose to 1502.3. when i exit gamestream the clocks stay at these speeds until i reset or remove the device from device manager and re enable it or i can stop the gamestream service in task manager. ive been in touch with nvidia and they cant replicate the error ive tried the card in three different computers using clean installs of both windows 8.1 and windows 7 driving me mad as the card idles at 48c while this is happening i have a msi gtx 970 gaming 4g latest bios everything stock anybody else have this problem. thanks in advance

    what video drivers versions you have tried?
    if i understood well, after you close gamestream, the VGA keeps its clock to load one and do not reduce the clocks to idle,
    is this correct?
    have you wanted longer period of time?
    do you use dual/multiple display config or just single display?

  • MSI Z77A-G65 - Need help with Overclocking

    Hi all, I will list hardware first:
    Motherboard: MSI Z77A-G65
    Bios: Version 10.8
    Graphics:   2x GIGABYTE GV-N670OC-2GD GeForce GTX 670 Windforce OC 2048MB in SLI
    Power Supply:  Seasonic SS-1250XM X-Series
    CPU: Intel Core i7-3770K Quad-Core Processor 3.5 GHz 8 MB Cache LGA 1155
    Memory: Corsair Vengeance 32GB (4x8GB) DDR3 1600 MHz (PC3 12800) Desktop Memory
    Optical: 2x Lite-On Super AllWrite 24X SATA DVD+/-RW Dual Layer Drive
    HDD: 3x Seagate Barracuda 2 TB HDD SATA 6 Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive
    HDD: 1x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive
    Sound: Creative Sound Blaster ZX SBX PCIE Gaming Sound Card with Audio Control Module
    SSD: 1x Plextor 512 GB SATA III Solid State Drive PX-512M5P
    Cooling: Cooler Master Seidon 240M Liquid CPU Water Cooling System with Copper Heatsink and 240mm Radiator - 2 Fans
    Operating System: Windows 8 Pro x64
    Case:  Cooler Master Cosmos II - Ultra Full Tower Computer Case with Metal Body and Hinged Side Panels
    Alright, now you see what I have. That is just about everything excluding things like my wireless mouse and keyboard.
    So, I have been perfecting this build for awhile now, but I'm not the most experienced at overclocking. I've used about 5-6 motherboards during about a year trying to get my 3770k to overclock. Yes, I wasted quite a bit of money. I recently RMA'd my CPU because I thought it was defective since I failed to overclock. Now, I have a brand new one. Then, I switched my 2133 G.Skill Sniper memory for more basic Corsair  memory. I thought possibly it could have been my memory that was causing issues since it was about the only non-new part left up until now. Now, this build is has all completely new parts. I don't think anything is defective.  Lastly, my OS has recently been installed. About 2 days ago. All drivers /windows updates are up to date.
    Alright, I gave my opinion on my hardware / OS and explained that. So, now I will try to explain my overclocking attempts. I first tried to overclock using the basic OC Genie II settings untouched. However, that didn't work out for me. I did get BSODs eventually or programs that crashed. Sometimes, games have crashed. I'm not doing anything overly important on this computer. I have a lot of other non-overclocked computers for various things like work ect. So, I am free to be able to play with this computer and try to get it OC'd properly. So, don't worry about that. I've read about 10-20 guides on overclocking and such, and for some reason I can't get things to be stable to the point that programs don't crash or fail. It seems with the Z77A-G65, there's no offset voltage tweaking option. If there is, I can't find it. I've read a lot that if you disable all power saving and use a fixed voltage that it can be more stable than using an offset voltage. Higher temps and more power usage I know.
    So far, I've tried both, and neither have really worked for me. If I put vdroop offset control to 100% my temperatures increase but it can handle it. So, I tried setting the CPU to be fixed at 1.3 while at 4.5ghz. That was still not stable. Prime was ok, but some games and programs crashed. So, it wasn't stable for real world usage. Most of the time actually prime will be ok unless I try to put it at 4.8ghz with mostly default settings. So, after I tried 4.5ghz and 1.3 fixed voltage with no power saving options on, I tried bringing the voltage up to 1.350 which increased the temperature under load to about 85C. This wasn't stable either, so I went up a bit higher, well alot in overclocking standards. I went up to 1.4 just to see the temperatures and it got up to about 85C a occasionally higher. This was not stable either. So I tried turning off all C states and other power saving options and setting the vdroop offset control to 100% while also setting the voltage to auto. This wasn't stable. Usually when I set the voltage to auto , it will crash at anything above 4.7ghz and not boot. Anything below that it will boot, and even be capable of running prime or intel burn test, but it won't remain completely stable with all applications. Even basic programs like Firefox crashes sometimes. I do have one program that is pretty nice for benchmarking in the real world, and that's Amazon's cloud drive uploader. I ran it for a bit and it will eventually crash if I'm overclocking. I have tried some games like Diablo 3, Borderlands 2, ect and they have crashed as well on a clean windows 8 install.
    I've also tried some of the turbo templates that only OC during turbo boost but idle at normal speeds/ 1.6ghz. This wasn't stable either. So, I'm at a loss, I've tried Turbo overclocking, Fixed voltage overclocking, offset voltage overclocking, power saving options on , and power saving options off. No luck. Any help would be appreciated. Thanks.

    First off, Ivy CPU's under conventional cooling solutions are terrible OC'ers. 85C is too hot for everyday use under stress. Mid 70C's or better still, less is recommended. All significant power saving features are lost once the CPU V. is taken out of Auto. VDroop at 100% supplies the most voltage and decreases it as the percentage is lowered. Turbo OC is often the best over a CPU Ratio OC. From what I can read, the CPU you have is average and should run stable at 44X or maybe 45X on Auto CPU V., all power saving features intact.
    32GB of RAM is great for rendering, graphics and audio/video creation, but if the goal is a gaming machine, 8GB to 16GB is more than enough.
    Added: Recommended settings; SA 0.965-0.970v's, PLL 1.82-1.84v's, I/O 1.07v's.

  • Grey Screen after update - need help

    Hi
    My friend just called me - her macbook is stuck on the grey screen with apple logo - after she done the security updates and restarted.
    She can boot into Windows XP (bootcamp) without any issues.
    I'm going over there tomorow to help her out and was wondering if someone could give me a little guidance as to what needs to be done.
    I guess I can try booting off of the instalation disc and reparing permissions, but after that I'm pretty much lost. Any help is greatly appreciated
    Cheers

    Hello,
    I've had this problem twice, and each occurred after a security update.
    What helped me was the following:
    -Take out your powercord and your battery. Press the power button for about 5 seconds.
    -Then, insert your battery and powercord, start the computer, and hold down AppleCTRL+PR.
    From what I understand, one of these two steps resets the power management system on the macbook.
    After you perform these two steps, your computer may still hang at the grey screen with the apple logo. However! Let it hang for about 5-10 minutes and it will automatically restart, and boot properly.
    You can also try calling Apple support on your friend's behalf ... they were more than helpful.
    Blackbook Core Duo   Mac OS X (10.4.9)  

  • Print insert result to a printer in TSQL trigger after insert - Need help.

    Hi,
    I am trying to print a record to a printer whenever a new record is inserted into a table called PrintTickets, using TSQL trigger for insert. 
    Is it possible to print a new inserted record to a printer?
    Here is the trigger tsql statement: 
    ALTER TRIGGER [dbo].[PrintDeal]
    ON [dbo].[PrintTickets]
    AFTER INSERT
    AS
    declare @Id numeric(18,0)
    ,@DealId char(15)
    ,@ValueDatePeriod1Currency1 datetime
    ,@Bank1Name char(56)
    ,@Currency1 char(3)
    ,@Currency2 char(3)
    ,@PaymentInstructionP1C1 char(80)
    ,@DealerId char(6)
    ,@DealVolumeCurrency1 float
    ,@CalVolumeP1C2 float
    ,@ExchangeRatePeriod1 float
    declare @tmp table
    Id numeric(18,0)
    ,DealId char(15)
    ,ValueDatePeriod1Currency1 datetime
    ,Bank1Name char(56)
    ,Currency1 char(3)
    ,Currency2 char(3)
    ,PaymentInstructionP1C1 char(80)
    ,DealerId char(6)
    ,DealVolumeCurrency1 float
    ,CalVolumeP1C2 float
    ,ExchangeRatePeriod1 float
    PRIMARY KEY (Id)
    BEGIN
    -- SET NOCOUNT ON added to prevent extra result sets from
    -- interfering with SELECT statements.
    SET NOCOUNT ON;
    -- Insert statements for trigger here
    insert @tmp
    select
    Id
    , DealId
    , ValueDatePeriod1Currency1
    , Bank1Name
    , Currency1
    , Currency2
    , PaymentInstructionP1C1
    , DealerId
    , DealVolumeCurrency1
    , CalVolumeP1C2
    , ExchangeRatePeriod1
    FROM dbo.PrintTickets
    WHERE ID=@@IDENTITY
    select @Id=Id
    ,@DealId=DealId
    ,@ValueDatePeriod1Currency1=ValueDatePeriod1Currency1
    ,@Bank1Name=Bank1Name
    ,@Currency1=Currency1
    ,@Currency2=Currency2
    ,@PaymentInstructionP1C1=PaymentInstructionP1C1
    ,@DealerId=DealerId
    ,@DealVolumeCurrency1=DealVolumeCurrency1
    ,@CalVolumeP1C2=CalVolumeP1C2
    ,@ExchangeRatePeriod1=ExchangeRatePeriod1
    from @tmp
    -- Code to print to a physical printer if possible
    END
    The table is called PrintTickets and it contains the following columns: 
    Id numeric(18,0)
    ,DealId char(15)
    ,ValueDatePeriod1Currency1 datetime
    ,Bank1Name char(56)
    ,Currency1 char(3)
    ,Currency2 char(3)
    ,PaymentInstructionP1C1 char(80)
    ,DealerId char(6)
    ,DealVolumeCurrency1 float
    ,CalVolumeP1C2 float
    ,ExchangeRatePeriod1 float
    PRIMARY KEY (Id)
    The dummy records that I am inserting for testing the results in csv format:
    Id,DealId,ValueDatePeriod1Currency1,Bank1Name,Currency1,Currency2,PaymentInstructionP1C1,DealerId,DealVolumeCurrency1,CalVolumeP1C2,ExchangeRatePeriod1
    696,XXX#33111 ,2014-03-04 00:00:00.000,HSBC ,USD,EUR,XXXXXXXXXXXXXXXXXXXXXXX ,MAT ,342342,87987,0.3123
    697,XXX#33113 ,2014-03-04 00:00:00.000,USB ,EUR,USD,9999999999999999999999,ZXY,2334243,32213,0.3245
    698,XXX#33114 ,2014-03-03 00:00:00.000,SWISS BANK ,CHF,USD,99999999999999900000,XYZ ,32423424,342,0.83432
    699,XXX#33115 ,2014-03-03 00:00:00.000,UK BANK ,USD,PND,XXXXXXXXXXXXXXXXXXXXXXX ,ABC,9809808,0,0.0349
    700,XXX#33116 ,2014-03-04 00:00:00.000,USCF BANK ,XXX,XXX,XXXXXXXXXXXXXXXXXXXXXXX ,ABC,89798797,756756,0.734
    I appreciate any help.
    Thanks in advance.

    Is it possible to print a new inserted record to a printer?
    From SQL Server?
    The task of SQL Server is to manage large of data effciently. It is not a general programming environment. It could possibly be done with a CLR procedure that that talks to the printer, but it is not the correct solution.
    A possible design could be to post a message on a Service Broker queue, and then the printing server would poll the queue and print the ticket.
    By the way, there are more flaws in your trigger. To find the inserted rows, you need to query the virtual table "inserted" which holds a copy of these rows. Furthermore, since a trigger fires once per statement, the trigger must handle the fact
    that multiple rows are inserted.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Having problems with burning - need help please!

    when I try and burn a disk itunes says no recording
    software found. Everytime I start up itunes it says the drivers associated with burning are missing. It ask me to
    reinstall the software which I do and I have the same
    problem. I have other burning software but cant burn any
    itunes Ive purchased do to the format. Any help would be greatly appreciated.
    The german note is:
    Achtung
    Die Registrierungseinträge für die iTunes Treiber zum Import und Brennen von CDs und DVDs fehlen. Diese kann Folge der Installation einer anderen Software zum Brennen von CDs sein. Bitte installieren sie iTunes erneut.
    Could anybody please help me??

    I need more information about your hardware configuration. Run the iTunes Help menu -> Run CD Diagnostics... command and post the results here.
    I'm assuming that you're not running 64-bit windows.
    It sounds like the driver didn't get installed. You could try doing a repair install on iTunes --
    Windows Start menu -> Settings -> Control Panels -> Add or Remove Programs
    Select iTunes, Select Change/Remove button, Select "Repair" radio button, click OK.
    If that doesn't work, you might try downloading just the CD drivers from :
    http://www.gearsoftware.com/support/drivers.cfm
    Get the first link, not the second one that talks about gearsec compatibility.

  • IDVD 4.01:  Some menus/folders are BLANK after burn.  HELP!

    I have a eMac, G4, 1GHz, 512mb and up to this point, iDVD has worked flawless.
    I'm working on a large project. Probably the largest I've ever done with iDVD. There are many pictures, several movies, a whole bunch of seperate folders, and everything has audio... The DVD previews perfect. Everything is the way I need/want it. However, the contents of some folders are blank (appearing black) after a burn. I'm stumped? I've tried recreating the folders, movies, images, audio in the affected areas. But, it's almost random! After some burns one folder will come out ok and a different one is affected. I'll fix one and the one I just fixed is blank! Any ideas? (I'm at witts end here)
    I've set iDVD to the 'Quality' setting in the perfs so it rebuilds everything on every burn. I've deleted all assets several times before a burn.
    Thanks in advance...
    spyderman

    Wow. Nobody had a soultion to this one...
    I decided a drastic change was needed. I absolutly had to get this DVD created. I assumed that either there was a problem with OS X 10.2.X, iDVD 4.01 or a Firmware problem with my Superdrive. The Firmware update for the Superdrive required OS X 10.3.8 or greater. So, that's what I did... I upgraded to OS X 10.4.2 and iLife 5. After the 2hr install and updates were applied, I attempted a burn. IT WORKED! I fixed the problem with a $70 purchase on eBay. I'm a happy Mac user once again.

  • MSI GE 620 - Need help changing intergrated graphics over to NVIDIA card.

    Hello, I don't know if I should be posting this question in the VGA Products section or the NVidia boards section but here goes anyway!
    I got an MSI GE 620. Now after I installed all my games onto the new system I notice something was off. My computer was using the on board Intel HD Family Graphics card to run my games instead of my NVIDIA Geforce GT 540M. Now I went to the NVIDIA settings and set the 3D settings to run on the NVIDIA High Performance Processor. Now some games ran off the NVIDIA card like Shogun 2, Dawn of War II, but a lot of the others wouldn't such as World of Warcraft.
    Now I've tried a lot of things to turn off the Intel HD card and make the system favor the NVIDIA but it doesn't. When I run dxdiag it just displays the Intel card and not the NVIDIA. Now obviously the BIOS is running the Intel card first on start up and I was told to just turn off the Intel card in BIOS and enable the PCI (If that's what I called in BIOS?) card which is the NVIDIA card in BIOS but I can't get into BIOS. I press F2 on start up and if just gives information about the laptop and I can see any options to change the video settings or display.
    I also tried to disable the Intel card in device manger but the screen just goes black and I have to force shut down and restart with the card off and I have to enable it again to get a normal screen resolution and such.
    I am just completely lost on how to turn off the on board graphics and make my NVIDIA Geforce GT 540M the only card that runs off everything. I would really appreciate any help on the matter as I'm just upset since the computer is less than a week old and I can't use it to its full power.
    Thank you.
    System Information
    Time of this report: 9/10/2011, 06:52:02
           Machine name:
       Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110622-1506)
               Language: English (Regional Setting: English)
    System Manufacturer: Micro-Star International
           System Model: GE620/FX620DX
                   BIOS: MSI GE620/FX620DX E16G5IMS Ver1.0A 03/09/11
              Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
                 Memory: 6144MB RAM
    Available OS Memory: 6052MB RAM
              Page File: 1889MB used, 10211MB available
            Windows Dir: C:\Windows
        DirectX Version: DirectX 11
    DX Setup Parameters: Not found
       User DPI Setting: 96 DPI (100 percent)
     System DPI Setting: 96 DPI (100 percent)
        DWM DPI Scaling: Disabled
         DxDiag Version: 6.01.7601.17514 64bit Unicode
    Display Devices
    Intel(R) HD Graphics Family
    NVIDIA Geforce GT 540M
    I also have another side question, My brother owns an MSI GT 640 Notebook, it has 4.00GB Ram but when I check the system (From Control panel) it says Only 2.98GB Usable, Is this something common ? should I change to Win7 64x ? what's the solution to this ?
    Thank you in advance.

    Quote from: flamephoenix on 10-September-11, 02:14:32
    is there no way to make it appear as GT 540M instead of intel HD family in the system/dxdiag/etc... ?
    For what purpose though? You can select in the nVidia control panel what software you want the GT 540M used for. The whole point of the technology is to reduce power consumption, so it only switches to the dedicated card when absolutely necessary. Have a look in the global settings (in the nVidia control panel) and see if it will use the GT 540M as the primary device. I don't have a notebook with switchable graphics so don't know what settings there are exactly.

  • Pix and Videos gone after update - need help please.

    Hi all,
    I upgraded to the new OS2 and loved it... no problems there.  When I tried to connect and pull pictures off via my PC, I got a message Blackberry Desktop software could not connect.  I tried it multiple times after restarting the Playbook but would not connect.  It connected and advised I needed to upgrade my software which I did, but when I started the Playbook after the install it was like it was brandnew out of the box.  Had to go through the tutorial and then I was shocked to find all my pictures and videos were gone.  I don'r care about the videos but had some really important (to me at least) pictures I wanted off of it.
    Sooooo.... any chance of recovering those or does the updates just "Blow" everything away?  I will never use my Playbook to take any pictures or video of anything again and guess I learned a painful lesson.
    Thanks for ANY input you might be able to provide.

    Same thing happened to me. RIM <Inappropriate Content Removed>
    this one up.

  • BBM icon missing after update. need help asap please

    Hi I'm using a bb bold 9780 and my bbm is 5.0.1.45 and when I tried updating it, it hangs whenever it finishes installing. And when I tired a battery pull, my bbm icon goes missing. Any idea how to solve this issue? Could really need some help here cos its quite impt. Thank you in advance
    Solved!
    Go to Solution.

    When you get a chance, do a battery pull.  When the red light goes away on the front of the phone, hold down the back button the entire time while the phone is booting up.  When the boot is complete, the phone will enter safe mode.
    http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB17877
    Try to delete it from there and do another battery pull / reinstall.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • MSI FX5900-TD or MSI FX5700 Ultra Need Help

    What card is the better one to buy and why?
    My Mainboard MSI K7N2 Delta-ILSR(601-6570-030)
    2X 512mb DDR 3200 Crucial memory
    AMD 2800+ 333 mhz FSB Boxed AXDA2800DKV4D Y822396250958 AQXEA 0318MPMW
    1999 AMD Barton (or though it says nothing on the box about being a Barton and having 512kb L2 Cache) is there any way to tell what it is? If it is can the bus be overclocked to 200 FSB ok?
    CPU Fan Cooler Master Aero 7 Lite (CP5-8J71F) is this fan ok or would I be best using the one that came with the CPU?
    Graphics Card ???
    Almost built.
    The MSI FX5900-TD 128mb
    Product Specifications
    Graphics Core: 256-bit
    Memory Interface: 256-bit
    Memory Bandwidth: 27.2GB/sec.
    Fill Rate: 3.6 billion texels/sec.
    Vertices per Second: 338 million
    Memory Data Rate: 850MHz
    Pixels per Clock (peak): 8
    Textures per Pixel: 16
    RAMDACs: 400MHz
    or
    The MSI FX5700 Ultra
    Product Specifications
    256-bit
    Memory Interface: 128-bit
    Memory Bandwidth: 14.4GB/sec.
    Fill Rate: 1.9 billion pixels/sec.
    Vertices/sec. 356 million
    Memory Data Rate: 900 MHz
    Pixels per Clock (peak): 4
    Textures per Pixel: 16
    RAMDACs 400 MHz
    Thanks for any help!  

    The 256 MB version will allow you to load heavier 3D scenes in its memory with great performance, but the 128 MB version will have more bandwidth and it will generally be faster, although when the time come that a 128 MB video card will run out of memory, then the card will start to swap memory between its memory and AGP memory, thus it will be much slower that having a 256 MB version a bit slower.
    Confused?
    I´d go for the 256 MB version. although it has 2.8 Ns memory and you could reach just 714 MHz memory clock speed, but the other card will have less memory.
    It´s just an opinion, but I would choose 256 MB version if I were you, and if I had the money  

  • Audio not playing after import (need HELP asap please)

    I cannot get my audio (mp3) to play sound after import. Looks like there has been many issues with the new Yosemite/imovie update. When will there be a fix? Can someone please tell me how to go back a to previous version of iMovie where this didn't happen?

    When you get a chance, do a battery pull.  When the red light goes away on the front of the phone, hold down the back button the entire time while the phone is booting up.  When the boot is complete, the phone will enter safe mode.
    http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB17877
    Try to delete it from there and do another battery pull / reinstall.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • MSI 9600GT..need help with volt mods?

    Okay, anybody with an MSI 9600GT (T2D512) have any luck finding volt mods to raise the GPU and/or Memory voltages?  How about it Bosskiller, think you can massage some MSI tech to write me a bios to raise the GPU voltage to 1.3 or 1.4 volts?  I'm only about 2000 3D Mark03/05 points away from top place in that class..but I need more volts!  LOL.    Gigabyte has a software program which raises voltage in the GUI, but unfortunately, it wont work on a non-Gigabyte card:(.  Think you can get 10-20 bios editors to work on that for me??  Hahahah.
    Paul

    @Aaron,  cooling is stock MSI "Seaweed" fan..cards run 37-48C max benchmarking (using OCZ feeZe heatpaste compound).
    @Frankenputer, yes I know the implications, if I fry the cards..I won't cry about it..
    All other users/readers, remember, modding is like gambling..if you cant afford to lose..dont do it!
    Paul

  • New to After Effects - need help with text manipulation!

    Hi all, I'm new to AE and this forum and I'm looking for some advice. I've been asked by the boss at work to create a short video clip, around 10-15 seconds, where text is displayed on the screen (3 words), after the few seconds, I want a 'forging' noise to happen and the final word in the text to be changed to another word and have a metallic effect applied, similar to the effect in this tutorial:
    Create Hot Metallic Text in After Effects - After Effects - macProVideo.com Hub
    Will this be difficult to do and do you guys think a complete beginner like myself can do it? I've got a lot of experience with the likes of PS, so I'm not too shy with Adobe software.
    Thanks,
    John

    johnster1991 wrote:
    Thanks for the advice, I appreciate it. So will it be difficult to have one word of text come onto the screen and overlay on top of the existing text, as if it's crashing over it? Any ideas on the steps I would use to do this? Thanks
    As you begin your career of using AE, you will change your vocabulary. Overlay will be replaced with spatial references like in front or behind.
    Designing text with surface styles like chrome or metal is not difficult. You can even import them from Photoshop if you have some PS chops or friends who can do it quickly.
    TEXT ONE can be easily replaced with TEXT TWO in any of dozens of different ways but to drop TWO in front of ONE is easy, you're just setting position keyframes. The finesse of animation, though, lies in the illusion of motion, exaggeration, overshooting and recoil. Your TWO could fall and squish and rebound and bounce or it could raise a dust cloud as it hits or it could make the camera wiggle. These are the things that separate simple key framing from animation and motion graphics.

  • MOVED: MSI GE 620 - Need help changing intergrated graphics over to NVIDIA card.

    This topic has been moved to MSI Notebook.
    https://forum-en.msi.com/index.php?topic=152084.0

    Quote from: flamephoenix on 10-September-11, 02:14:32
    is there no way to make it appear as GT 540M instead of intel HD family in the system/dxdiag/etc... ?
    For what purpose though? You can select in the nVidia control panel what software you want the GT 540M used for. The whole point of the technology is to reduce power consumption, so it only switches to the dedicated card when absolutely necessary. Have a look in the global settings (in the nVidia control panel) and see if it will use the GT 540M as the primary device. I don't have a notebook with switchable graphics so don't know what settings there are exactly.

Maybe you are looking for

  • Java plugin doesn't work, even though it's installed correctly and java programs work.

    As stated. I have a link in ~/.mozilla/plugin that points to test/jre/plugin/i386/ns7/libjavaplugin_oji.so, which is the java 6 update 21 runtime environment. Java doesn't show in about:plugins, and java applets don't start (firefox suggests to insta

  • How do i delete only 1 of 2 account+password that was saved for a website? (My library

    Some websites have a login id and password., which firefox will save. You can go on the site and enter another id+password and firefox now saves both, and gives you a selection box the next time you visit the site. How can i delete one of these (but

  • Itunes stops working with vista

    Has anyone had problems with itunes stopping working with windows vista? I have tried all the upgrades but itunes still stops working when playing songs and videos.

  • Doubt in joins

    hi, i have four tables tab1,tab2,tab3,tab4 tab1(columns are name,timestamp,id) name, timestamp ,id name1 5/28/2007 12:45:18 PM 01 name2 5/28/2007 12:44:18 PM 02 name3 5/28/2007 12:43:18 PM 03 name4 5/28/2007 12:43:18 PM 04 name 5 5/28/2007 12:42:18 P

  • Automotatic Message Determination:Consignment Settlement

    Friends, I need some help in after doing the consignment settlement process: After I run MRKO and settle the consignment once a month, I need to send a form to the vendor detailing the settlements done over the period of one month. My questions speci