MSI Afterburner Lacks Record Option

Hello all,
I hope you can help me with this. I've used MSI Afterburner successfully on a desktop computer (specifically the recording aspect) and thought it was great, so I'm trying to get it set up for my laptop and am not having similar luck.
My main problem is this: I understand that when I view settings in the program that there should be tabs reading "Monitoring", "On-Screen Display", "Screen Capture", "Video Capture", etc. When I open up my settings, the only tabs available are "General", "Monitoring" and "User Interface". If there's an option somewhere to turn on video and screen recording, I haven't had any luck finding it.
I'm using the latest version of Afterburner (3.0.1). Maybe my graphics card isn't compatible? I have an NVIDIA GeForce GT 335M. I don't recall what the video card is on my desktop.
Thanks.

what afterburner version you use?

Similar Messages

  • MSI Afterburner, Unsynced recording

    Hello,
    I'm having trouble with my game recordings.
    So I've setup my MSI Afterburner to record 30FPS 88% quality. Recordings are nice, all is good. There is however one major problem. When I export the project into a .avi .mpg or anything at all. There is a slight desync issue. It looks like its playing nicely. every often the frame jumps back a couple of seconds. I can't see how often it happens, but it litterally destroys the movies
    So my question is how can the raw record play perfect, but when taking it into Permiere, try to export it then the video start to jump back a couple of frame and audio is in desync?

    Screen recordings cause a LOT of problems... below are links I have saved... not about the MSI that you use, but the IDEAS in these links may help
    Here are some Screen Capture Notes/Problems
    NOTE - do NOT use a Variable Frame Rate capture setting !!!
    Free Open Source software http://camstudio.org/
    -use with Lossless Lagarith http://forums.adobe.com/thread/875797
    http://www.pixelmetrics.com/
    Some of these notes are for Premiere Elements, but may help with PPro
    Fraps & Elements http://forums.adobe.com/thread/967201
    -and Elements preset http://forums.adobe.com/thread/943772
    -and more Elements http://forums.adobe.com/thread/871095
    Camtasia http://forums.adobe.com/thread/836800
    -and Lagarith Codec http://forums.adobe.com/thread/1287577
    -and http://forums.adobe.com/thread/775288
    -and http://forums.adobe.com/thread/453044
    -and http://forums.adobe.com/message/3202148
    Techsmith codec http://forums.adobe.com/message/3692768
    -and http://forums.adobe.com/thread/1046914?tstart=0
    BB Flashback http://forums.adobe.com/thread/1074014
    XSplit recorder http://forums.adobe.com/thread/1160940
    Elgato http://forums.adobe.com/thread/1163126 w/picture
    Dxtory http://forums.adobe.com/message/5172056
    Bandicam read #10 http://forums.adobe.com/thread/954394
    Hauppauge MPEG-2 TS http://forums.adobe.com/thread/1285168
    -and http://forums.adobe.com/thread/1289304 for MANY links

  • MSI afterburner not recording

    Hi there.
    I'm having this issue with MSI afterburner 3.0.0 Beta 14. Whenever I record using AVI format everything works 100% but when I use MKV The vidoe and audio is not in sync. Also when I use the new quick sync method I can do the benchmark and everything looks fine but when I try to record my gameplay I only get audio. I did everything posted on Guru3d.com but it still doesn't work. I also tried to playback on another pc. I have i5-2500k with z77-g45 so it's not my physical pc.
    Thanks
    Nelis

    best ask in afterburner forum at:
    http://forums.guru3d.com/forumdisplay.php?f=55

  • Problem with MSI Afterburner Sound Record.

    So first I want to say this is a absolutely awesome program and beats Fraps 100-0.
    Anyways only problem I have, is that when I try to record Sound with it, sound lags/fades etc. Anyone has idea why would this happen? It also seems like the video itself is smoother when I'm recording without sound, because of "sound lag". I have tried all different Audio Source Types etc. I also should have all drivers up to date etc. It would be shame if I would have to get different program for sound :(
    So any idea what is going on? Anyone else with same problem?

    what afterburner version you use?

  • MSI Afterburner can't stop recording

    Hi, first sorry for my English, I speak French.
    I try to video capture with MSI Afterburner 4.1.0, I set the hotkey @ CTRL+F11.
    When I hit the hot-key, it's start recording, I have an camera icon in MSI Afterburner Hardware Monitor, but if I hit CTRL+F11 again, it doesn't stop the recording. Even if i press long time CTRL+F11 nothing happen, I changed hot-key with other one, it's start but never stop, in Windows 7 Desktop, does the video capture work only in game ?
    Any one have an idea
    I set picture capture @ CTRL+F12, then changed Screen capture to ALT+F12, when I hit the hot-key in Windows desktop, it's writed screenshot captured in MSI Afterburner Hardware Monitor, but nothing in the screenshot folder... I tested Screenshot capture in game and it works, i find JPG files in folder.

    For MSI Afterburner support here is a dedicated forum for it:
    http://forums.guru3d.com/forumdisplay.php?f=55
    Well since there is no MSI product in here...

  • MSI Afterburner "randomly" stops recording

    I have an issue with an old version of MSI Afterburner. I use it to record gameplay, and the software would often stops recording anything, even if I press the key to stop the recording and start a new one. I have to actually leave the game and restart MSI Afterburner to get it to work again. The last video captured by the software would usually be corrupted and unreadable.
    I think I know what's causing the problem, but I don't really know how to fix it : it happens from time to time, when a loading screen appears. MSI Afterburner would just completely cease to operate somewhere during the loading, with no warning, and now way to fix it without restarting the whole thing. I'm using version 3.0.1.
    Yes, I know I should update MSI Afterburner, I'm actually doing that just now, but I'm especially interested to know if this is a known issue at all, and if that's the case, if it has been fixed in the latter versions. If not, is there any workarounds to it, besides stopping the recording each time there's a loading screen ? That would be impractical.
    Thanks in advance for your answers. ^^

    Same problem occurs with 4.0.0. How can I fix it ?

  • Msi Afterburner will not record

    Hi every one i am hoping some one can help me as i can not seem to get it working, i am trying to record games (watchdogs and bf4) with msi afterburner but i can not get it to record, i have upgraded my afterburner to 3.0.0 but it still wont work.
    Also when i try to screen shot it says "screenshot captured" but yet it does not save to the file location i chose in the settings, as far as i can tell it does not save any where as i can not find it, i really don't know what is wrong, i just want to be able to record my game play but it just wont record any thing, i have set it to record when i press F9 and when i press F9 a blinking camera appears on msi afterburner but i cant get it to stop blinking even when i press F9 again the only way to stop it is to close afterburner and no files still save.
    My graphics card is a Msi r9 270 gaming on driver 14.4, would upgrading to amd's beta drivers perhaps get it to work.

    Did you set up your capture file where you want it to be saved for both the screenshots and videos?
    I use AB version 2.3.1 and it works just fine.

  • How to use MSI Afterburner

    The MSI Afterburner is a great tool for monitoring your vga's health status as well as overclocking it including tweaking voltages.
    Monitoring
    In case you came her with a vga related problems you might be asked to tell about the load and idle temps of your vga.
    So first we focus on how to monitor temps.
    First we start Afterburner and see this.
    Just for monitoring we don't need the sliders visible as these are for tweaking/oc and we take care of that later. To the right there is a window with different graphs of all kinds of temps and voltages. There you can montiore the idle status but that won't really help you to see what happens in a game. You will only know about your temps under load in the moment your gaming and not when already leaving the game. At least the graphs will show the temps as a graph so you can read up temps of past times also but it is quite complicated to find the temp spike of the right time and read up the value.
    It's easier to have the temps and voltages displayed in the game with an OSD (note: OSD doesn't work in 64bit applications). To get that work you need to activate it.
    First click on "Settings"
    Now go to "monitoring" in the Settings menu
    In "Active hardware monitoring graphs" you can choose what should be displayed in OSD.
    On the left you have the possible graphs to be selected. When you click on a graph you activate it and the symbol next to it lights up. Now you have to choose the properties of that graph. That is done by clicking on "Show in On-Screen Display" or "Show in Logitech keyboard LCD Display" or "Show in tray icon". Choosing "Show in On-Screen Display" means the graph will be shown in the game while LCD means it will be shown on a supported LCD of a Logitech Keyboard (e.g. G510). These both options are therefor ideal to checkout load temps and voltages.
    Please note that there is also a graph for Famerate to be activated to even monitor FPS in games
    After setting the graphs you want to be displayed just click on "ok" and you are done. NOTE: Only graphs of sensors that can be read out can be selected. Some cards won't be able to support gpu voltage monitoring hence that graph can't be selected.
    If needed you can also add hotkeys for the OSD in On-Screen Display. By clicking on "More" you have the ability to mod the look and layout of the OSD as well as setting up profiles.
    Now after starting a game you can see the graphs selected displayed inside your game so you can see what happens while you are gaming and you can also find out how your vga's status will change in any game situation
    Fan control
    After monitoring temps you might have seen too high temps and want to lower them or you want more cooling in oc attempts. Also could be you saw low temps but your card is very noisy because of high fan speeds. All that could make it necessary to change the fan speed manually instead of auto control
    After deactivating  auto control by clicking on "Auto" you can move the slider between Min and Max to select the fan speed in %. Setting 68 therefor means fan will be running at 68% of it's full speed. After selecting click on "Apply" to apply the chosen fan speed.
    Besides a static speed you can also program a custom fan profile with clicking on "Fan" in "Settings" afterwards just deactivate auto control and activate "User Define"
    Checking stability with Kombustor
    Along with Afterburner the downloaded archive also contains Kombustor. Kombustor is a burn-in vga tool like Furmark which will apply very massive load to your vga and will reveal thermal and stability problems when letting it run for some time.
    After installing you can start it out of Afterburner by clicking on the "K" to left
    Overclocking and Overvolting
    With the Core Clock and Memory Clock sliders you can tweak the clockrates of the Gpu and the VRAM. The Mhz value selected adds or reduces the stock clockrates. That means e.g. setting +65 for Gpu will add 65Mhz to the stock clockrate. Setting -50Mhz will reduce the stock clockrate by 50Mhz. To apply your oc remember to always click on "Apply"
    Overvolting with the overvolting slider will work the same way what means what you set will be added to the stock voltage. Note that overvolting gpu on Kepler (GTX600) is limited on non unlocked cards (Lightning/Hawk) to the nvidia max of 1.175v and setting anything else will therefor be useless.
    If overvolting is greyed out and can't be changed you have to activate it in "Settings"/"General".
    Simply check "Unlock voltage control" and "Unlock voltage monitoring"
    NOTE: Despite mistakable informations on the web the only MSI Radeon 7850/7770 cards able to overvolt are R7850 Power Edition 2GD5/(OC) and R7770 Power Edition 1GD5/(OC). Due to technical restrictions all other 7850/7770 models can't be overvolted therefor overvoltage slider won't be available.
    Triple overvolting will only be available with Lightning, Hawk or Power Edition cards and is a unique MSI feature that won't work with any other manufacturers card.
    On supported cards you can access it (after enabling overvoltage, see above) when clicking on the grey symbol next to the voltage slider
    the voltage slider will then change to triple overvoltage (core/mem/aux)
    Note that triple overvoltage for Lightning and Power Edition GTX680 & GTX670 vgas will require Afterburner version 2.2.3, the latest GTX 660 & 650 cards will require Afterburner 2.2.4 or above. GTX680/770/780 Lightning users must use an unlocked Afterburner version for full triple overvoltage abilities (Nvidia gpu voltage limit). Until Version 3.0.0 Beta 17 a special SE variant was required. With 3.0.0 Beta 18 the SE version has been merged to the normal version. To unlock the advanced voltage settings simply go to "General" tab of the settings, check "unlock Voltage control and choose "extended MSI"
    Power Limit
    The Power Limit slider is only accessible on GTX600 or above cards as it is required to modify the unique GPU boost feature. GPU boost is nvidia's auto oc feature for Kepler cards and will increase clockrate when not reaching the pre-defined TDP value under load. With the Power limit slider you can change the TDP limit in %. Anything over 100% will extend the limit and enable the gpu to boost clockrate while already at 100% TDP.
    If the Power limit is not visible although you are using a GTX600 vga you chose the wrong afterburner skin in "Settings"/"User Interface" The Power Limit slider will only be visible with "Default MSI Afterburner Skin"
    ----> --->
    Temp Limit
    With the new GeForce GTX7xx / Titan series vgas came an enhanced version of the boost introduced with GTX6xx vgas. Boost 2.0 adds a Temp Limit to the previous Power Limit. So now the available boost is not only determined by the Power Limit but also by the set Temp limit. To change the Temp limit you need a supporting version of Afterburner (3.00 Beta 10 and above). Click on the down arrow next to the Power limit slider and Temp Limit becomes available.
    --->
    By default Temp limit is set to a target temp of 79°C what means anything below will allow max boost. Increasing Temp limit will allow boosting at higher temps. In standard configuration Power and Temp limit are linked what means increasing Power Limit will also increase Temp limit. If you want to change that and set individually uncheck "Link". Clicking on "Prioritize" you can decide if Temp or TDP Limit should be the primary factor to determine boost.
    Gaming APP
    Another thing which needs to be kept in mind is that maximum clockrates for the latest GeForce GTX7xx Gaming requires running >>Gaming APP<<. Switch to Gaming Mode (N770 TF 2GD5/OC (GeForce GTX 770 GAMING)) or OC Mode (N780 TF 3GD5/OC (GeForce GTX 780 GAMING)) to allow maximum boost clockrates.
    Oc Profiles and starting up with oc
    After tweaking clockrates, voltages and power limit you can setup five profiles with these values. Just click on a profile number followed by clicking save. Now you can change between your profiles by choosing the number of it.
    If you want to startup with the oc applied just click on "Apply overclocking at system startup" and make sure the green button left on that lights up in green.
    Dragon Army Skins
    A nice modification for Afterburner are the new MSI Gaming series skins to adapt to the latest MSI Gaming lineup: http://game.msi.com/
    Just download the skins >>here<< and copy them in your Skins folder in the MSI Afterburner main folder. After restarting Afterburner you can now choose the Dragon Army Skins in "Settings"/"User Interface". Dargon Army Skins are included by default from Afterburner 3.0.0 Beta 18 and above and can there be chosen like shown before.

    Version update
    Afterburner 4.0.0 final/stable is out. Click >>here<< for download.
    This is a new official version.
    SE version and normal are merged to one now
    Release info:
    Quote from: http://forums.guru3d.com/showpost.php?p=4905781&postcount=1
    Changes list includes:
    •   Added MSI R9 280 series voltage control support
    •   Added AMD Tonga graphics processors family support
    •   Added core voltage control for reference design AMD RADEON R9 285X series graphics cards with NCP81022 voltage regulators
    •   Added official overclocking limits extension support for AMD Tonga graphics processors. Please take a note that unofficial overclocking mode is currently not supported for AMD Tonga graphics processors family
    •   Various parts of hardware monitoring module have been pumped up to improve hardware monitoring usability and flexibility:
    o   Added layered monitoring graphs rendering mode. Now you may right click source graph in monitoring window, select “Attach” in the context menu then point to destination graph to attach source graph to it and create a group of layered graphs. This feature allows you to render as many layered graphs on the same grid as you wish. The colors of graphs in layered rendering mode can be customized independently of each other so you can easily identify them
    o   Added multi-column monitoring graphs rendering mode. Now you can adjust the number of graph columns in “Active monitoring graphs” section in “Monitoring” tab
    o   Added “Override graph name” option to “Monitoring” tab. Now you can rename the graphs displayed in hardware monitoring window
    o   Monitoring history buffer size is no longer defined by monitoring window width. Now pre-history buffer size is fixed and stores the last 3600 samples (1 hour for 1000ms polling period) for each graph
    o   Improved tray icon monitoring module:
    o   Now you can select either text mode or barchart indicator mode for each value displayed in tray icon. Barchart indicator mode can be extremely useful for visualizing data like GPU / CPU usage
    o   Improved Logitech keyboard LCD monitoring module:
    o   Ported to new Logitech API to provide support for newer Logitech LCD displays
    o   Added support for color LCD display of Logitech G19/G19s keyboards
    o   Added graph mode support for color LCD display of Logitech G19/G19s keyboards. Now in addition to previously available text mode you can optionally select graph mode and see exact copy of MSI Afterburner’s monitoring graphs displayed directly inside the keyboard LCD. You can also press “Menu” soft button on your Logitech G19/G19S keyboard to toggle between text and graph modes dynamically in realtime
    o   Added acceleration support to LCD scrolling implementation
    o   Added larger 8x12, 10x12, 12x12 and 12x16 fonts support for text mode
    •   Added “Regional settings” section to “User Interface” tab:
    o   Temperature format settings allow you to switch between Celsius and Fahrenheit format for monitored temperatures. Please take a note that this setting affects temperature readouts only. Hardware related temperature adjustments (e.g. fan speed to temperature mapping curve for all cards or temperature target adjustment for NVIDIA Kepler series) are always being displayed and adjusted in Celsius for maximum unification, safety and compatibility
    o   12 hours / 24 hours time format settings allow you to configure time format for On-Screen Display and hardware monitoring window
    •   Added “Enable low-level IO driver” option to the “Compatibility properties” section in “General” tab
    •   Added SLI sync performance limit graph for release 340 and newer NVIDIA drivers
    •   Display device enumeration implementation has been modified slightly to allow monitoring Intel iGPUs when low-level IO driver is not enabled
    •   Improved handshaking algorithm reduces the risk of seeing multiple running instances of child processes (e.g. RTSS)
    •   Optimized hardware polling for NVIDIA graphics cards
    •   Optimized hardware polling for multi-GPU systems
    •   Added SVI2 voltage control support via AMD ADL SDK to provide compatibility with future graphics cards
    •   Added automatic prerecording settings to “Videocapture” tab. When you enable automatic mode prerecording session is being started automatically on each 3D application startup. Please take a note that in this case you can still use video prerecord hotkey to stop then manually restart prerecording session if necessary
    •   Drastically improved skin engine:
    o   Improved skin compiler gives more detailed error messages when skin compilation fail due to error in some source image file
    o   Source image file format is no longer limited to 24-bit BMP files only. Now skin compiler supports all possible bit depths for BMP format and fully supports PNG format with alpha channel
    o   Added built-in bitmap effect for extracting alpha-channel from PNG image files
    o   Skin format has been upgraded to v1.3. New format supports alpha channel based transparency for skinned window, allowing skin designers to define semi-transparent skin areas, apply antialiasing to the skin window edges and so on
    o   Added new skinned window composition modes support and “Skin composition mode” settings to “User interface tab”. New settings allows you to use one of the following modes:
    o   Traditional mode – suits best for backward compatibility with existing skins and performance testing
    o   Layered mode with colorkey - provides much faster rendering of skins with non-rectangular window shape and additionally allows you to adjust transparency of skinned window
    o   Layered mode with alpha – provides per-pixel alpha channel support and advanced visual effects for compatible skins and also allows you to adjust transparency of skinned window
    o   Skin format reference guide has been updated to v1.7 to document these changes
    o   Improved implementation of rollback to default skin
    o   Full skins cross-compatibility with other overclocking applications based on RivaTuner engine. Special GUI transformation layer allows you to use the skins designed for third party RivaTuner based overclocking applications and makes the process of migration to MSI Afterburner from such overclocking tools much more comfortable for you. You can keep the look and feel of your preferred overclocking application and at the same time enjoy extended MSI Afterburner’s features including full range of supported graphics cards, industry leading powerful and robust monitoring module, flexible video recording features and many more
    •   RivaTuner Statistics Server has been upgraded to v6.2.0
    The added MSI R9 280 series voltage control support might be what many of the users of these cards are waiting for as the majority lacked any overvoltage support so far. After release of 4.0.0 final there will be no more public betas of Afterburner but private testing as said before.

  • Rollback segment Error coming for 8 lacks Record while creating MV

    Hi All,
    i am creating a materialized View and it gives us 8 lacks record but when we creates in production its fails due to rollback segment does not have enough space to handle it and it did not create the MV.
    can anyone help me out to resolve this issue for the below query while creating MV.
    SELECT DISTINCT NVL
    ((ROUND ((jt_date_completed - jt_date_requested) * 24, 2)
    0
    ) AS actual_hrs_to_complete,
    NVL ((ROUND ((jt_date_responded - jt_date_requested) * 24, 2)
    0
    ) AS actual_hrs_to_respond,
    peo1.peo_name AS agent_name,
    peo1.peo_user_name AS asagent_soe_id,
    le.lglent_desc AS ap_system,
    ' ' AS assign_work_request_comment,
    DECODE (jt.jt_bill_id,
    138802, 'CLIENT BILLABLE',
    138803, 'CONTRACTED',
    138804, 'INTERNAL BILLABLE',
    NULL, ' '
    ) AS billable,
    bl.bldg_name_cc AS building, bl.bldg_id_ls AS building_id,
    DECODE (bl.bldg_active_cc,
    'Y', 'ACTIVE',
    'INACTIVE'
    ) AS building_status,
    DECODE (jt.jt_wrk_cause_id,
    141521, 'STANDARD WEAR AND TEAR',
    141522, 'NEGLIGENCE',
    141523, 'ACCIDENTAL',
    141524, 'MECHANICAL MALFUNCTION',
    141525, 'OVERSIGHT',
    141526, 'VANDAL',
    141527, 'STANDARD',
    141528, 'PROJECT WORK',
    6058229, 'TEST',
    NULL, ' '
    ) AS cause_type,
    ' ' AS comments, peo3.peo_name AS completed_by,
    jt.jt_requestor_email AS contact_email,
    jt.jt_requestor_name_first
    || ' '
    || jt.jt_requestor_name_last AS contact_name,
    jt.jt_requestor_phone AS contact_phone,
    cc.cstctrcd_apcode AS corp_code,
    cc.cstctrcd_code AS cost_center,
    jt.jt_date_closed AS date_closed,
    jt.jt_date_completed AS date_completed,
    jt.jt_date_requested AS date_requested,
    jt.jt_date_responded AS date_responded,
    jt.jt_date_response_ecd AS date_response_ecd,
    jt.jt_date_scheduled AS date_scheduled,
    DECODE (jt.jt_def_id,
    139949, 'WTG VENDOR RESPONSE',
    139950, 'WAITING ON PARTS',
    139951, 'LABOR AVAILABILITY',
    139952, 'DEFERRED- HI PRI WORK',
    139953, 'WTG APPROVAL',
    139954, 'FUNDING REQUIRED',
    139955, 'ACCESS DENIED',
    139956, 'WTG MATERIAL',
    NULL, ' '
    ) AS deferral_reason,
    jt.jt_description AS description,
    jt.jt_date_resched_ecd AS ecd,
    fmg.facility_manager AS facility_manager,
    fl.floors_text AS FLOOR, gl.genled_desc AS general_ledger,
    ' ' AS kiosk_date_requested, ' ' AS kiosk_dispatch_confirmed,
    ' ' AS kiosk_dispatched,
    eqp.equip_customer_code AS linked_equipment_alias,
    eqp.equip_id AS linked_equipment_id,
    eqp.equip_text AS linked_equipment_name,
    DECODE (jt_originator_type_id,
    1000, 'PROJECT MOVE REQUEST',
    138834, 'CUSTOMER INITIATED CORRECTION',
    138835, 'CUSTOMER INITIATED REQUEST',
    138836, 'CORRECTIVE MAINTENANCE',
    138837, 'CONFERENCE ROOM BOOKING',
    138838, 'PROJECT INITIATED REQUEST',
    138839, 'PLANNED PREVENTIVE MAINTENANCE',
    138840, 'SELF INITATED REQUEST',
    NULL, ' '
    ) AS originator_type,
    ' ' AS payment_terms, priority_text AS priority_code,
    swoty.sworktype_text AS problem_type,
    prop.property_name_cc AS property,
    jt.jt_cost_quote_total AS quote_total,
    par.levels_name AS region,
    DECODE (jt.jt_repdef_id,
    141534, 'ADJUSTED SETTING',
    141535, 'TRAINING FOR END',
    141536, 'NEW REQUEST',
    141537, 'NO REPAIR REQUIR',
    141538, 'REPLACED PARTS',
    141539, 'REPLACE EQUIPMEN',
    1000699, 'NEW REQUEST',
    NULL, ' '
    ) AS repair_definitions,
    jt.jt_repairdesc AS repair_description,
    jt.jt_requestor AS requestor, ' ' AS requestor_cost_center,
    jt.jt_requestor_email AS requestor_email,
    jt.jt_requestor_name_first AS requestor_name,
    jt.jt_requestor_phone AS requestor_phone,
    ' ' AS response_time, rm.room_name_cc AS room,
    p1.peo_provider_code1 AS service_provider,
    p1.peo_address_1 AS service_provider_address,
    peocity.city_text service_provider_city,
    p1.peo_provider_code1 AS service_provider_code,
    peocity.city_country_name AS service_provider_country,
    peocur.currency_text AS service_provider_currency,
    p1.peo_name AS service_provider_description,
    p1.peo_dispatch_method AS serv_prov_dispatc_hmethod,
    p1.peo_rate_double AS serv_prov_double_time_rate,
    p1.peo_email AS service_provider_email,
    p1.peo_emergency_phone AS serv_prov_emergency_phone,
    p1.peo_fax AS service_provider_fax_number,
    p1.peo_home_phone AS service_provider_home_phone,
    p1.peo_rate_hourly AS service_provider_hourly_rate,
    p1.peo_title AS service_provider_job_title,
    p1.peo_method_id AS service_provider_method,
    p1.peo_cell_phone AS service_provider_mobile_phone,
    p1.peo_pager AS service_provider_pager,
    p1.peo_rate_differential AS service_provider_rates,
    p1.peo_rate_differential AS ser_prov_shift_differential,
    peocity.city_state_prov_text AS serv_prov_state_province,
    DECODE (p1.peo_active,
    'Y', 'ACTIVE',
    'INACTIVE'
    ) AS service_provider_status,
    p1.peo_url AS serv_prov_web_site_address,
    p1.peo_phone AS service_provider_work_phone,
    p1.peo_postal_code AS serv_prov_zip_postal_code, ' ' AS shift,
    ' ' AS skill,
    DECODE (jt.jt_bigstatus_id,
    138813, 'NEW',
    138814, 'PENDING',
    138815, 'OPEN',
    138816, 'COMPLETED',
    138817, 'CLOSED',
    138818, 'CANCELLED',
    NULL, ' '
    ) AS status,
    lev.levels_name AS subregion, ' ' AS trade,
    p1.peo_ls_interface_code1 AS vendor_id,
    p1.peo_fax AS vendor_purchasing_fax,
    p1.peo_vendor_site_code AS vendor_sitecode,
    jt.jt_id AS vendor_ticket, p1.peo_name AS vendor_companyname,
    jt.jt_requestor_vip AS vip, wo.wo_id AS work_order_no,
    jt.jt_id AS work_request,
    jt.jt_class_id AS work_request_class,
    woty.worktype_text AS work_type, ' ' AS wr_cost,
    jt.jt_description AS wr_description,
    ' ' AS wr_dispatch_method,
    DECODE (jt.jt_bigstatus_id,
    138813, 'NEW',
    138814, 'PENDING',
    138815, 'OPEN',
    138816, 'COMPLETED',
    138817, 'CLOSED',
    138818, 'CANCELLED',
    NULL, ' '
    ) AS wr_status,
    ctry.country_name AS country
    FROM citi.jobticket jt,
    citi.property prop,
    citi.bldg bl,
    citi.bldg_levels bldglvl,
    citi.LEVELS lev,
    citi.LEVELS par,
    (SELECT crstools.stragg (peo_name) facility_manager,
    bldgcon_bldg_id
    FROM citi.bldg_contacts, citi.people
    WHERE bldgcon_peo_id = peo_id
    AND bldgcon_contype_id IN (40181, 10142)
    GROUP BY bldgcon_bldg_id) fmg,
    citi.floors fl,
    citi.room rm,
    citi.general_ledger gl,
    citi.legal_entity le,
    citi.cost_center_codes cc,
    citi.equipment eqp,
    citi.worktype woty,
    citi.subworktype swoty,
    citi.work_order wo,
    citi.jt_workers jtwo,
    citi.priority,
    citi.country ctry,
    citi.people p1,
    citi.people peo3,
    citi.people peo1,
    citi.city peocity,
    citi.currency peocur
    WHERE jt.jt_bldg_id = bl.bldg_id
    AND bl.bldg_id = bldglvl.bldg_levels_bldg_id
    AND bldglvl.bldg_levels_levels_id = lev.levels_id
    AND lev.levels_parent = par.levels_id(+)
    AND prop.property_id = bl.bldg_property_id
    AND bl.bldg_active_ls <> 'N'
    AND jt.jt_floors_id = fl.floors_id(+)
    AND jt.jt_room_id = rm.room_id(+)
    AND jt.jt_bldg_id = fmg.bldgcon_bldg_id(+)
    AND jt.jt_genled_id = gl.genled_id(+)
    AND gl.genled_lglent_id = le.lglent_id(+)
    AND jt.jt_cstctrcd_id = cc.cstctrcd_id(+)
    AND jt.jt_equip_id = eqp.equip_id(+)
    AND jt.jt_id = jtwo.jtw_jt_id(+)
    AND jt.jt_worktype_id = woty.worktype_id(+)
    AND jt.jt_sworktype_id = swoty.sworktype_id(+)
    AND jt.jt_wo_id = wo.wo_id
    AND jt.jt_priority_id = priority_id(+)
    AND jt.jt_date_requested >= ADD_MONTHS (SYSDATE, -12)
    AND bl.bldg_country_id = ctry.country_id
    AND jtwo.jtw_peo_id = p1.peo_id(+)
    AND p1.peo_city_id = peocity.city_id(+)
    AND jt.jt_completed_by_peo_id = peo3.peo_id(+)
    AND p1.peo_rate_currency_id = peocur.currency_id(+)
    AND jt.jt_agent_peo_id = peo1.peo_id(+);
    Regards
    shyam~

    Hi,
    Its ora-1555? IS your undo_retention sufficient?
    Since you are developer the only option you have is to tune the query?
    Am curious to know like I create materialized view so that I do not have to run complex query on the master database / or to prevent the access to master database more than once to get the same data?
    Like to know which is your case because your query seem to be too complex to be the case for former. Do you think this materialized view would be used frequently in your application?
    Regards
    Anurag Tibrewal.

  • MSI Afterburner no longer working in DayZ Standalone

    Hello everyone,
       I have been using MSI to record my game play for some time and recently within the last couple months my MSI Afterburner has up and stopped recording in DayZ Standalone BUT it does work in every other game I have. So I was hoping someone would be able to help me to get it working again. Thank you for you time.

    I'm running version 4.1.0.7013
     I asked the Devs and they haven't done anything to make AB not compatible with the game. 1 day AB worked with DayZ Standalone and the next it didn't. My AB works with EVERY single other game I have.
    And as for part of my computer was the problem it wouldn't work to record in any game. I tested Dxtory and it cut my FPS SUPER bad, but it did work in the game. I just don't know what could of happened to cause it to stop working pretty much over night. Unless there is a setting now that it has Riva TurnerStatisticsServer v6.3.0.7688

  • Can't touch second card in MSI afterburner.

    Hi, I recently crossfired an MSI 5830 with an MSI 5850 on my Asus M4A89gtd pro/USB3 motherboard.  Both of the cards are twin frozr II.
    Before the crossfire I had the 5830 single.
    The motherboard has 2 pci-e slots, and the bottom one is the master card slot.
    So, at first, I put the 5850 in the master card slot because it was the more powerful card.
    I booted the computer up and everything worked fine, crossfire elabled and it was stable.  So I went to MSI afterburner to start overclocking. 
    I can do whatever I want to the 5850, change volts, core clock, memory clock, fan.
    But when I go to the settings and switch to the 5830 to overclock it, I can't do a single thing to it without the computer freezing.
    I've tried many different drivers and none of them made a difference.
    I've discovered though that if I disable the "Sync settings for similar graphics processors" option, I can change the voltage and fan options, but they don't do anything.
    If I adjust the core clock or the memory clock though, it freezes.
    So, I switched the cards around, and put the 5830 in the master card slot, and the 5850 in the other slot.
    The results are that I can overclock both cards with no freezing.
    Now, I don't know if this is how I HAVE to do it, but I would prefer the 5850 to be the master card so it does most of the work.  Maybe that won't work though because the 5850 is faster than the 5830 and thus it has to be the 2nd card.
    *Note* Even though the 5830 is in the master card slot, MSI afterburner still recognises it as the master card or "GPU-1".
    I've also stopped CCC from starting when windows boots up, and I've also disabled ULPS.
    So, can anybody please tell me if there is a way to have the 5850 be in the master card slot?
    Or, do I have to use the 5830 for that?
    This could also be a hardware/motherboard thing and not MSI afterburner.
    One more thing, after a computer reboot, the first time you open the settings in afterburner, it crashes and said it stopped working.
    So I have to click on the desktop icon to open it again, but after that I can open the setting however much I want without a problem, it's just after you reboot it does that once.
    I don't know if this helps or not but I think it's worth mentioning.
    I'm using afterburner v2.1.0 beta 5 and the newest, 10.12 drivers.
    Can anybody please help me?
    Thanks,
    Randy

    you can ask here: http://forums.guru3d.com/forumdisplay.php?f=55

  • MSI Afterburner VGA Overclocking/Tweaking Tool

    Thank you MSI for MSI Afterburner, Overclocking and Voltage Control!!!

    There is a new version available: Afterburner v.1.2.0 (2009-10-12)
    Changelog:
    Quote
    - Add voltage adjustment of ATI Radeon HD 5870 and 5850
    - Added NVIDIA G 210 and GT 240 series graphics cards support
    - Added voltage control for custom design MSI N220GT and N240GT series graphics cards with uP6262 voltage regulators
    - Added intitial AMD RADEON HD 5750 and AMD RADEON HD 5770 series graphics cards support
    - Added Logitech keyboards LCD displays support. Now it is possible to display hardware monitor data in Logitech keyboards LCD
    - Extended I2C address scanning range for uP6208 voltage regulators to allow supporting voltage control on non-MSI custom design graphics cards equipped with uP6208
    - Fixed on-board memory size detection for AMD RADEON HD 5000 series graphics cards
    - Now option also affects voltage control
    - Fixed database entry for AMD RADEON HD 4890 series graphics cards. Afterburner no longer adjusts 2D voltage instead of 3D voltage on AMD RADEON HD 4890
    - Fixed database entry for AMD RADEON HD 5850 series graphics cards. Afterburner no longer adjusts UVD voltage instead of 3D voltage on AMD RADEON HD 5850
    - Automatic profiles manager is now restarted after resuming from suspended mode
    - Revised VRM access synchronization protocol for safer simultaneous VRM polling by multiple software products at the same time
    - Added setting to the context menu of detached hardware monitor window. When this option is disabled, hardware monitor window can be minimized to the taskbar while staying in detached mode
    - Now it is possible to pause hardware monitor activity via option in the context menu of hardware monitor window
    - Maximum allowed hardware polling period has been extended from 5 to 60 seconds
    - Added configuration file setting allowing power users to display performance profiler status informaition in the hardware monitor window. The information allows estimating average CPU performance hit caused by hardware monitor and software automatic fan control layers
    - Optimized timer message queue processing under high CPU load conditions for better hardware monitoring and software automatic fan control events handling
    - Reduced CPU usage for simultaneous GPU clock frequency and GPU usage readings on AMD graphics cards, both values are being read in single pass now
    - Maximum limits has been extended from 1000 to 1500MHz for core clock graph and from 2000 to 2500MHz for shader clock and memory clock graphs
    - Added readme file and option to display it in the installer
    - Now tab is not displayed in advanced settings window if there are no fan control capable GPUs in the system
    - Updated context help files, added more hints to button help
    Download: http://event.msi.com/vga/afterburner/download.htm

  • MSI Afterburner - MSI 7850 Voltage Control

    When will afterburner support voltage control for this card? We're able to unlock voltage control in options but still not able to change the voltage control in afterburner. Other mis 7970 cards can use it fine, not this msi 7850 though.

    Hi again
    I have been doing some further testing today, using the AMD Catalyst drivers v12.8 and MSI Afterburner v2.2.3.
    THE MSI R7850 Power Edition 2GD5 card appears to have two GPU core VDDC voltage states as standard, 0.82v for 2D clocks and 1.21v for 3D clocks.
    I have confirmed this using GPU-Z v0.6.4 (managed to get it to display current VDDC correctly at last) and AIDA64. For some reason , Afterburner lets it appear that you are changing the VDDC voltage (once the unlock voltage options are ticked in settings).  Afterburner shows a core default VDDC of 1075mv when first installed which doesn't tally with what is actually the current 3D clock VDDC voltage of 1.21v. Even sliding this to 1.1v or 1.3v (the maximum) has no effect on the VDDC or 1.21v. The Afterburner OSD will always display what the voltage is set to on its own slider,  even if sensor output still shows the actual 1.21v.
    Now, this is where it gets interesting. I installed the Sapphire Trixx application which as you probably know, is similar to Afterburner. Right at the start, it was displaying the adjustable core VDDC voltage as 1.21v although the slider would only let me decrease the voltage. I believe that this is due to Trixx having  a VDDC limit of 1.18v.  To test Trixx, I reduced the core VDDC to 1.1v. This core voltage adjustment was successfully reflected in MSI Kombustor, AIDA 64, GPU-Z when running 3D..
    Strangely, this means that the Trixx application will let me adjust the volatge on MSI Power Edition  GPU core, albeit only to down volt from 1.21v where as the MSI Afterburner app does not adjust  the core voltage at all, despite the fact  that on the surface, it appears to work, letting you select core voltage 0.82v all the way to 1.3v. The 7850 states that it is triple overvoltage enchanced but Afterburner will not bypass the hard coded MSI BIOS voltages.

  • K Boost on MSI Afterburner

    hi guys,
         So, as the title says, is there any equivalent as K Boost that comes with EVGA Precision with MSI After Burner??
    Well to explain i always used MSI Afterburner with all of my VGA but when i bought a EVGA VGA i tried EVGA precision and i don't like it very much and switched again to MSI Afterburner and the i realize that it has not the K-Boost option to keep my VGA always Overclocked and that pissed me off because crysis 2 don't get up to the boost speed so i switched again to EVGA precision but i don't really like it, so now i read on a forum that MSI Afterburner now will come with RivaTuner RTSS 6.0 and i watn that, so anyone could help me with this to move again to MSI Afterburner
    Thanks!

    The lower advertised boost clock is just the minimal boost gpu will achieve under load. As the gpu can boost more if possible it will clock the highest stable possible in current power and thermal situation. 1228Mhz seems to be the (very cool) boost clock it can run in your system so be happy with it.

  • MSI Afterburner MJPG Compression

    Hey guys,
    currently Im using a test version of Adobe Premiere Pro CS5.5. Everything works fine so far, but now I found a problem where I dont know what to do.
    I tried to record some BF3 footage with MSI Afterburned which worked fine. The video is also playable in VLC and so on, but its too big of course.
    It uses MJPG compression. Adobe Premiere Pro can also plays the videos, but when I want to render them to h264 or any other video compression I get an error.
    http://www.imagebanana.com/view/3ggvjgy3/Unbenannt.png
    I dont really get why this happens, cause the replay of the videos works fine.
    Maybe someone of you can help or confirm that it doesnt work for him either
    Thanks in advance

    Did you ever figure this problem out? I can't even load the MJPG avi file into Adobe Premiere without an error.

Maybe you are looking for