MSI Afterburner no longer working in DayZ Standalone

Hello everyone,
I have been using MSI to record my game play for some time and recently within the last couple months my MSI Afterburner has up and stopped recording in DayZ Standalone BUT it does work in every other game I have. So I was hoping someone would be able to help me to get it working again. Thank you for you time.

I'm running version 4.1.0.7013
I asked the Devs and they haven't done anything to make AB not compatible with the game. 1 day AB worked with DayZ Standalone and the next it didn't. My AB works with EVERY single other game I have.
And as for part of my computer was the problem it wouldn't work to record in any game. I tested Dxtory and it cut my FPS SUPER bad, but it did work in the game. I just don't know what could of happened to cause it to stop working pretty much over night. Unless there is a setting now that it has Riva TurnerStatisticsServer v6.3.0.7688

Similar Messages

Msi afterburner and Witcher3

OSD in Msi afterburner/RTSS stopped working in Witcher 3 and I don't know why cuz it did work... my card is R9 290x and I updated my drivers to 15.5 beta

Which exact card model is in use?

How to use MSI Afterburner

The MSI Afterburner is a great tool for monitoring your vga's health status as well as overclocking it including tweaking voltages.
Monitoring
In case you came her with a vga related problems you might be asked to tell about the load and idle temps of your vga.
So first we focus on how to monitor temps.
First we start Afterburner and see this.
Just for monitoring we don't need the sliders visible as these are for tweaking/oc and we take care of that later. To the right there is a window with different graphs of all kinds of temps and voltages. There you can montiore the idle status but that won't really help you to see what happens in a game. You will only know about your temps under load in the moment your gaming and not when already leaving the game. At least the graphs will show the temps as a graph so you can read up temps of past times also but it is quite complicated to find the temp spike of the right time and read up the value.
It's easier to have the temps and voltages displayed in the game with an OSD (note: OSD doesn't work in 64bit applications). To get that work you need to activate it.
First click on "Settings"
Now go to "monitoring" in the Settings menu
In "Active hardware monitoring graphs" you can choose what should be displayed in OSD.
On the left you have the possible graphs to be selected. When you click on a graph you activate it and the symbol next to it lights up. Now you have to choose the properties of that graph. That is done by clicking on "Show in On-Screen Display" or "Show in Logitech keyboard LCD Display" or "Show in tray icon". Choosing "Show in On-Screen Display" means the graph will be shown in the game while LCD means it will be shown on a supported LCD of a Logitech Keyboard (e.g. G510). These both options are therefor ideal to checkout load temps and voltages.
Please note that there is also a graph for Famerate to be activated to even monitor FPS in games
After setting the graphs you want to be displayed just click on "ok" and you are done. NOTE: Only graphs of sensors that can be read out can be selected. Some cards won't be able to support gpu voltage monitoring hence that graph can't be selected.
If needed you can also add hotkeys for the OSD in On-Screen Display. By clicking on "More" you have the ability to mod the look and layout of the OSD as well as setting up profiles.
Now after starting a game you can see the graphs selected displayed inside your game so you can see what happens while you are gaming and you can also find out how your vga's status will change in any game situation
Fan control
After monitoring temps you might have seen too high temps and want to lower them or you want more cooling in oc attempts. Also could be you saw low temps but your card is very noisy because of high fan speeds. All that could make it necessary to change the fan speed manually instead of auto control
After deactivating auto control by clicking on "Auto" you can move the slider between Min and Max to select the fan speed in %. Setting 68 therefor means fan will be running at 68% of it's full speed. After selecting click on "Apply" to apply the chosen fan speed.
Besides a static speed you can also program a custom fan profile with clicking on "Fan" in "Settings" afterwards just deactivate auto control and activate "User Define"
Checking stability with Kombustor
Along with Afterburner the downloaded archive also contains Kombustor. Kombustor is a burn-in vga tool like Furmark which will apply very massive load to your vga and will reveal thermal and stability problems when letting it run for some time.
After installing you can start it out of Afterburner by clicking on the "K" to left
Overclocking and Overvolting
With the Core Clock and Memory Clock sliders you can tweak the clockrates of the Gpu and the VRAM. The Mhz value selected adds or reduces the stock clockrates. That means e.g. setting +65 for Gpu will add 65Mhz to the stock clockrate. Setting -50Mhz will reduce the stock clockrate by 50Mhz. To apply your oc remember to always click on "Apply"
Overvolting with the overvolting slider will work the same way what means what you set will be added to the stock voltage. Note that overvolting gpu on Kepler (GTX600) is limited on non unlocked cards (Lightning/Hawk) to the nvidia max of 1.175v and setting anything else will therefor be useless.
If overvolting is greyed out and can't be changed you have to activate it in "Settings"/"General".
Simply check "Unlock voltage control" and "Unlock voltage monitoring"
NOTE: Despite mistakable informations on the web the only MSI Radeon 7850/7770 cards able to overvolt are R7850 Power Edition 2GD5/(OC) and R7770 Power Edition 1GD5/(OC). Due to technical restrictions all other 7850/7770 models can't be overvolted therefor overvoltage slider won't be available.
Triple overvolting will only be available with Lightning, Hawk or Power Edition cards and is a unique MSI feature that won't work with any other manufacturers card.
On supported cards you can access it (after enabling overvoltage, see above) when clicking on the grey symbol next to the voltage slider
the voltage slider will then change to triple overvoltage (core/mem/aux)
Note that triple overvoltage for Lightning and Power Edition GTX680 & GTX670 vgas will require Afterburner version 2.2.3, the latest GTX 660 & 650 cards will require Afterburner 2.2.4 or above. GTX680/770/780 Lightning users must use an unlocked Afterburner version for full triple overvoltage abilities (Nvidia gpu voltage limit). Until Version 3.0.0 Beta 17 a special SE variant was required. With 3.0.0 Beta 18 the SE version has been merged to the normal version. To unlock the advanced voltage settings simply go to "General" tab of the settings, check "unlock Voltage control and choose "extended MSI"
Power Limit
The Power Limit slider is only accessible on GTX600 or above cards as it is required to modify the unique GPU boost feature. GPU boost is nvidia's auto oc feature for Kepler cards and will increase clockrate when not reaching the pre-defined TDP value under load. With the Power limit slider you can change the TDP limit in %. Anything over 100% will extend the limit and enable the gpu to boost clockrate while already at 100% TDP.
If the Power limit is not visible although you are using a GTX600 vga you chose the wrong afterburner skin in "Settings"/"User Interface" The Power Limit slider will only be visible with "Default MSI Afterburner Skin"
----> --->
Temp Limit
With the new GeForce GTX7xx / Titan series vgas came an enhanced version of the boost introduced with GTX6xx vgas. Boost 2.0 adds a Temp Limit to the previous Power Limit. So now the available boost is not only determined by the Power Limit but also by the set Temp limit. To change the Temp limit you need a supporting version of Afterburner (3.00 Beta 10 and above). Click on the down arrow next to the Power limit slider and Temp Limit becomes available.
--->
By default Temp limit is set to a target temp of 79°C what means anything below will allow max boost. Increasing Temp limit will allow boosting at higher temps. In standard configuration Power and Temp limit are linked what means increasing Power Limit will also increase Temp limit. If you want to change that and set individually uncheck "Link". Clicking on "Prioritize" you can decide if Temp or TDP Limit should be the primary factor to determine boost.
Gaming APP
Another thing which needs to be kept in mind is that maximum clockrates for the latest GeForce GTX7xx Gaming requires running >>Gaming APP<<. Switch to Gaming Mode (N770 TF 2GD5/OC (GeForce GTX 770 GAMING)) or OC Mode (N780 TF 3GD5/OC (GeForce GTX 780 GAMING)) to allow maximum boost clockrates.
Oc Profiles and starting up with oc
After tweaking clockrates, voltages and power limit you can setup five profiles with these values. Just click on a profile number followed by clicking save. Now you can change between your profiles by choosing the number of it.
If you want to startup with the oc applied just click on "Apply overclocking at system startup" and make sure the green button left on that lights up in green.
Dragon Army Skins
A nice modification for Afterburner are the new MSI Gaming series skins to adapt to the latest MSI Gaming lineup: http://game.msi.com/
Just download the skins >>here<< and copy them in your Skins folder in the MSI Afterburner main folder. After restarting Afterburner you can now choose the Dragon Army Skins in "Settings"/"User Interface". Dargon Army Skins are included by default from Afterburner 3.0.0 Beta 18 and above and can there be chosen like shown before.

Version update
Afterburner 4.0.0 final/stable is out. Click >>here<< for download.
This is a new official version.
SE version and normal are merged to one now
Release info:
Quote from: http://forums.guru3d.com/showpost.php?p=4905781&postcount=1
Changes list includes:
•   Added MSI R9 280 series voltage control support
•   Added AMD Tonga graphics processors family support
•   Added core voltage control for reference design AMD RADEON R9 285X series graphics cards with NCP81022 voltage regulators
•   Added official overclocking limits extension support for AMD Tonga graphics processors. Please take a note that unofficial overclocking mode is currently not supported for AMD Tonga graphics processors family
•   Various parts of hardware monitoring module have been pumped up to improve hardware monitoring usability and flexibility:
o   Added layered monitoring graphs rendering mode. Now you may right click source graph in monitoring window, select “Attach” in the context menu then point to destination graph to attach source graph to it and create a group of layered graphs. This feature allows you to render as many layered graphs on the same grid as you wish. The colors of graphs in layered rendering mode can be customized independently of each other so you can easily identify them
o   Added multi-column monitoring graphs rendering mode. Now you can adjust the number of graph columns in “Active monitoring graphs” section in “Monitoring” tab
o   Added “Override graph name” option to “Monitoring” tab. Now you can rename the graphs displayed in hardware monitoring window
o   Monitoring history buffer size is no longer defined by monitoring window width. Now pre-history buffer size is fixed and stores the last 3600 samples (1 hour for 1000ms polling period) for each graph
o   Improved tray icon monitoring module:
o   Now you can select either text mode or barchart indicator mode for each value displayed in tray icon. Barchart indicator mode can be extremely useful for visualizing data like GPU / CPU usage
o   Improved Logitech keyboard LCD monitoring module:
o   Ported to new Logitech API to provide support for newer Logitech LCD displays
o   Added support for color LCD display of Logitech G19/G19s keyboards
o   Added graph mode support for color LCD display of Logitech G19/G19s keyboards. Now in addition to previously available text mode you can optionally select graph mode and see exact copy of MSI Afterburner’s monitoring graphs displayed directly inside the keyboard LCD. You can also press “Menu” soft button on your Logitech G19/G19S keyboard to toggle between text and graph modes dynamically in realtime
o   Added acceleration support to LCD scrolling implementation
o   Added larger 8x12, 10x12, 12x12 and 12x16 fonts support for text mode
•   Added “Regional settings” section to “User Interface” tab:
o   Temperature format settings allow you to switch between Celsius and Fahrenheit format for monitored temperatures. Please take a note that this setting affects temperature readouts only. Hardware related temperature adjustments (e.g. fan speed to temperature mapping curve for all cards or temperature target adjustment for NVIDIA Kepler series) are always being displayed and adjusted in Celsius for maximum unification, safety and compatibility
o   12 hours / 24 hours time format settings allow you to configure time format for On-Screen Display and hardware monitoring window
•   Added “Enable low-level IO driver” option to the “Compatibility properties” section in “General” tab
•   Added SLI sync performance limit graph for release 340 and newer NVIDIA drivers
•   Display device enumeration implementation has been modified slightly to allow monitoring Intel iGPUs when low-level IO driver is not enabled
•   Improved handshaking algorithm reduces the risk of seeing multiple running instances of child processes (e.g. RTSS)
•   Optimized hardware polling for NVIDIA graphics cards
•   Optimized hardware polling for multi-GPU systems
•   Added SVI2 voltage control support via AMD ADL SDK to provide compatibility with future graphics cards
•   Added automatic prerecording settings to “Videocapture” tab. When you enable automatic mode prerecording session is being started automatically on each 3D application startup. Please take a note that in this case you can still use video prerecord hotkey to stop then manually restart prerecording session if necessary
•   Drastically improved skin engine:
o   Improved skin compiler gives more detailed error messages when skin compilation fail due to error in some source image file
o   Source image file format is no longer limited to 24-bit BMP files only. Now skin compiler supports all possible bit depths for BMP format and fully supports PNG format with alpha channel
o   Added built-in bitmap effect for extracting alpha-channel from PNG image files
o   Skin format has been upgraded to v1.3. New format supports alpha channel based transparency for skinned window, allowing skin designers to define semi-transparent skin areas, apply antialiasing to the skin window edges and so on
o   Added new skinned window composition modes support and “Skin composition mode” settings to “User interface tab”. New settings allows you to use one of the following modes:
o   Traditional mode – suits best for backward compatibility with existing skins and performance testing
o   Layered mode with colorkey - provides much faster rendering of skins with non-rectangular window shape and additionally allows you to adjust transparency of skinned window
o   Layered mode with alpha – provides per-pixel alpha channel support and advanced visual effects for compatible skins and also allows you to adjust transparency of skinned window
o   Skin format reference guide has been updated to v1.7 to document these changes
o   Improved implementation of rollback to default skin
o   Full skins cross-compatibility with other overclocking applications based on RivaTuner engine. Special GUI transformation layer allows you to use the skins designed for third party RivaTuner based overclocking applications and makes the process of migration to MSI Afterburner from such overclocking tools much more comfortable for you. You can keep the look and feel of your preferred overclocking application and at the same time enjoy extended MSI Afterburner’s features including full range of supported graphics cards, industry leading powerful and robust monitoring module, flexible video recording features and many more
•   RivaTuner Statistics Server has been upgraded to v6.2.0
The added MSI R9 280 series voltage control support might be what many of the users of these cards are waiting for as the majority lacked any overvoltage support so far. After release of 4.0.0 final there will be no more public betas of Afterburner but private testing as said before.

MSI Afterburner can't stop recording

Hi, first sorry for my English, I speak French.
I try to video capture with MSI Afterburner 4.1.0, I set the hotkey @ CTRL+F11.
When I hit the hot-key, it's start recording, I have an camera icon in MSI Afterburner Hardware Monitor, but if I hit CTRL+F11 again, it doesn't stop the recording. Even if i press long time CTRL+F11 nothing happen, I changed hot-key with other one, it's start but never stop, in Windows 7 Desktop, does the video capture work only in game ?
Any one have an idea
I set picture capture @ CTRL+F12, then changed Screen capture to ALT+F12, when I hit the hot-key in Windows desktop, it's writed screenshot captured in MSI Afterburner Hardware Monitor, but nothing in the screenshot folder... I tested Screenshot capture in game and it works, i find JPG files in folder.

For MSI Afterburner support here is a dedicated forum for it:
http://forums.guru3d.com/forumdisplay.php?f=55
Well since there is no MSI product in here...

MSI Afterburner - 2.2.0 Beta 3 Core Voltage 0+ (Question)

Sup guys,
I installed the MSI Afterburner - 2.2.0 Beta 3, i read the manual and some sites etc. one thing i do not understand and that is how this version's Core Voltage works. As i've seen on youtube and various forums that the Core Voltage is displayed as the volts are set to exp: 0.0950V, but mine is displayed as a "+0". It never displays the Volts at which you are currently at, like the Core Clock or Memory clock etc. Any ideas?

I was wondering what that switch was for
So i switched to "Performance Mode" and kind of almost freaked out when i booted back up, because my pc took a while to start up "longer than normal", when it entered Windows it changed to 800x600 Res and said my Hardware was not supported, but a min or 2 after that it said "New Device Installed and ready for use" and asked to restart, so i restarted and....... kapish
Seems we have a winner:
It does run a bit hotter than when on silent mode, but will sort that out.
Thanks for the effort.
Ps. I Assume that is my actual "Volt" measurement

MSI Afterburner When OC my gpu it is touching 95c.Is it normal

I bought a new msi 5770 with voltage tweak.My gpu temp will around 40-50c in ideal mode.And 80-95c under heaviy load.When OC my gpu it is touching >>95c.Is it normal or not??.
<<<<<<<<<<<<<<<<<<<< I ONLY USED MSI AFTERBURNER FOR OVERCLOCKING THE GPU >>>>>>>>>>>>>>>>>>>>>>>..
MY config is
Intel Core 2 duo e4400(2.00 Ghz)
2 gb RAM(1+1 mode)
Intel 945 GCNL mainboard
standard 450 watt PSU
Plz.advice me

Quote from: J_C_9 on 14-March-10, 07:05:52
Personally, I don't like running a GPU over 80C. Someone implied that their (one year old card?) card hasn't died yet running hotter, but that is definitely no proof at all it won't die prematurely...
Trust me, they are designed for it, check the whitepages on ATi or NVidia.
Ive been running a 9800GTX for almost 30 months with temps reaching 85 Celsius regurlarly and it hasnt had a hickup yet.
Must add thats its a pre oc-ed one and I never got it higher, tried, but didnt work.
So to say it will die prematurely, is a bit shortsighted in my opion.
Read the net and reviews and youll see it common nowadayds that gpu's run that hot, since gpu computing and gaming are getting more and more gpu intensive.
Ill bet there are even people out there, that fold or grid on it and they run systems 24/7 for years and years with the same cards and having zero issues and they run temps around the 80's/85's too, just like on my system, especially if you have 2 or more cards on the same board.
You really think that gpu manufacturers havent thought about it?
As long as you dont fiddle with voltage tweaks, get a good case airflow and keep it under 90C youll be just fine.
But thats mine opinion

Crash after going idle - MSI Afterburner / GTX 970 SLI

Greetings,
I love my new MSI GTX 970 Gaming Cards -- they work awesomely
However, I have a problem where if I'm running MSI Afterburner at all (i.e. load it, but don't do any overclocking), I receive a black screen and reboot 5-45 seconds after exiting any 3D application. The applications all run fine, the crash does not occur if Afterburner is not open. I've received the crash after Furmark, Elite Dangerous, Heaven Benchmark, Star Citizen, etc.. The idle crash NEVER happens so long as Afterburner isn't running..
I've used drivercleaner to clean out all old drivers, I've uninstalled MSI afterburner and reinstalled (and cleaned directories/registry inbetween).
Any suggestions/ideas?
Update - the crash does NOT occur if i'm running with SLI disabled.
John

Sorry and thanks for the guide - I wont' be lazy next time
Geforce 344.16 driver
Afterburner 4.0.0 (is there a beta that 'officially' supports GTX 970? - I didn't see it in the changelog)
MSI Gaming app installed or uninstalled (tried both) - latest version from MSI website
Rest of stats -
ASUS P8P67 Pro - 3602 (latest BIOS I could find)
VGA: MSI Gaming GTX 970 in SLI
PSU: Corsair HX 950
Intel Core i7-2600k S/B oc'd to 4.6 Ghz
Mem: 2x8GB DDR3-1600 (stock speed/settings/voltage)
Crucial MX100 512GB
Cooler: Original Koolance EXOS for the CPU
Windows 7 64-bit
Quote from: Nichrome on 04-October-14, 23:10:14
Hello,
We need a bit more info >>Posting Guide<<
Also if you could state versions of Afterburner, MSI Gaming App (if you use it) and of Nvidia driver.

GS70 2PE Stealth Pro constant GPU switching with MSI Afterburner

So I searched Google like crazy but couldnt find any other threads with this issue reported.
If I have afterburner running while not playing games(general desktop usage), the power light constantly changes orange to white every second. It seems the GPU keeps switching on and off.
Now this wouldn't be a huge issue however due to this, both fans kick in every 2-3 seconds for a duration of about 2-3 seconds then off again. Its pretty annoying since they go full blast for that bit. Just in general this isn't normal behavior. If I close afterburner down, its fine again and stays white(Intel hd4000).
I read users had issues with MSI nvidia overclock tool on older notebooks but that tool is no longer present.
Any ideas?
Thanks for you help.

Quote from: DJINFERNO806 on 21-April-14, 05:57:14
So I searched Google like crazy but couldnt find any other threads with this issue reported.
If I have afterburner running while not playing games(general desktop usage), the power light constantly changes orange to white every second. It seems the GPU keeps switching on and off.
Now this wouldn't be a huge issue however due to this, both fans kick in every 2-3 seconds for a duration of about 2-3 seconds then off again. Its pretty annoying since they go full blast for that bit. Just in general this isn't normal behavior. If I close afterburner down, its fine again and stays white(Intel hd4000).
I read users had issues with MSI nvidia overclock tool on older notebooks but that tool is no longer present.
Any ideas?
Thanks for you help.
MSI Afterburner causes the card to get enabled every time it 'checks' the card to update stats like the temperature, core clock, etc....Of course it's going to work like that.
If you don't want it to do it while you're not playing games, close Afterburner.

Facebook and Slacker no longer working with Firefox. Still work with Explorer. Until a week ago problem did not exist.

I am for about one week not able to input information on Facebook. Also the Facebook page appears in a huge font. Regarding Slacker I do not see any available online radio stations. Until about a week ago everything worked fine. At present I can work with Internet Explorer, but at present can no longer work with Firefox.
== URL of affected sites ==
http://www.facebook.com; http //www.slacker.com
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C)

Haven't tried facebook... But Slacker doesn't work for me either. Running 4.0b7pre on Ubuntu...
Going to google it at some point, but slacker.com returns:
VelocityViewServlet : Error processing the template
Invocation of method 'init' in class com.rockit.webplayer.beans.BrowserDetect threw exception class java.lang.NumberFormatException : For input string: ""
java.lang.NumberFormatException: For input string: ""
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:468)
at java.lang.Integer.parseInt(Integer.java:497)
at com.rockit.webplayer.beans.browser.DetectFirefox.detect(Unknown Source)
at com.rockit.webplayer.beans.BrowserDetect.doInit(Unknown Source)
at com.rockit.webplayer.beans.BrowserDetect.init(Unknown Source)
at sun.reflect.GeneratedMethodAccessor49.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.velocity.util.introspection.UberspectImpl$VelMethodImpl.invoke(UberspectImpl.java:267)
at org.apache.velocity.runtime.parser.node.ASTMethod.execute(ASTMethod.java:197)
at org.apache.velocity.runtime.parser.node.ASTReference.execute(ASTReference.java:175)
at org.apache.velocity.runtime.parser.node.ASTReference.render(ASTReference.java:220)
at org.apache.velocity.runtime.parser.node.SimpleNode.render(SimpleNode.java:230)
at org.apache.velocity.runtime.directive.Parse.render(Parse.java:181)
at org.apache.velocity.runtime.parser.node.ASTDirective.render(ASTDirective.java:114)
at org.apache.velocity.runtime.parser.node.SimpleNode.render(SimpleNode.java:230)
at org.apache.velocity.Template.merge(Template.java:256)
at org.apache.velocity.tools.view.servlet.VelocityViewServlet.performMerge(Unknown Source)
at org.apache.velocity.tools.view.servlet.VelocityViewServlet.mergeTemplate(Unknown Source)
at org.apache.velocity.tools.view.servlet.VelocityViewServlet.doRequest(Unknown Source)
at org.apache.velocity.tools.view.servlet.VelocityViewServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at com.rockit.util.servlet.StatsServletFilterAction.doFilter(Unknown Source)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)

Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. I have tried to uninstall iTunes but the Windows uninstaller will not delete the program I get a message that says: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. How do I get iTunes to work again?

Whentrying to uninstall iTunes (the first program that must be uninstalled per the instructions) I get a message: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. I can't even uninstall iTunes?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Onboard Mac Lan no longer works after 1.9 update!!!

I was using bios v1.8 and both my Mac Lan and my Giga Lan were working perfectly fine. Now that i updated to v1.9 my Mac Lan no longer works but my Giga is fine!!!
My Mac Lan still gets an ip address from my router, but i cannot ping the router nor anyone else on the network and my internet does not work!! So right now im using my Giga lan but i want my other one working like it was.
I tried going BACK to v1.8 but it did not fix the problem, so i went back yet again to v1.9 and im still left with the same problem. Ive tired disabling it and re-enabling it in both the bios and in windows and still nothing. Ive also tried re-installing the drivers and that did not work either. I even ran a Winsock Fix but that didn't fix the problem either.
Is anyone else having this problem besides me? what can i do to fix it???

Download new bios and extract it to a directory where you can find it (root of c:\ if you are lazy like me). Run wminfo if you are paranoid about losing your mac address and copy it down for your nvidia adapter.
Restart windows in safe mode. Close every application down in task manager.
Run winflash as described below and CHECK ALL THE RIGHT BOXES TO UPDATE BOOTBLOCK AND TO CLEAR THY CMOS. Read Syar's description below as that is what I used:
Quote from: syar2003 on 30-July-05, 00:24:48
No , floppy flash is not neccesary !
Can use
C:\Program Files\MSI\Live Update 3\FlashUty\Award
winflash.exe
Place checkmarks on bootblock/dmi area/update all/clear cmos
During flashing you see it will verify the programming of the bios chip .
And the good thing is unlike dos flash you can redo it if it fails , just by starting taskmanager and kill winflash.exe
and start over (as long as the machine isn't powered down or restarted).
I always say no after the flashing when asked to restart , exit the winflash utility , make a normal shutdown , turn off PSU for 10 seconds , then turn back
on , enter bios and load optimized default , followed by a boot to build/update dmi pool .
Kill all unwanted apps in the systemtray before running winflash and dont have any other applications running .
Best way is to boot to windows safemode .

FF 3.6.6 :: Address Bar No Longer Works - Help?

After updating Firefox to version 3.6.6 on Windows XP SP 3, the address bar no longer works for navigating to pages. When entering any URL and pressing enter, the page reloads with google.com (which is my homepage in FF). Clicking some bookmarks works. However, navigating from search results in Google does not. I have tried reinstalling. Also, I have tried to start up in Safe Mode. Nothing helps. Any help would be greatly appreciated.
== This happened ==
Every time Firefox opened
== After Updating to FF 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.5; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) )

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Webcam no longer working in Skype

Hi All
I have a Dell laptop with an integrated webcam and for some reason last Thursday the webcam no longer work in skype. It was working the day before. It still works in yahoo. When I try to make a video call or test it under options - video settings I get a black screen with that moving circle indicating that the video is loading but it never loads. The internet connection is very fast. Has anyone else seen this issue or know how to resolve it?
Thank you in advance.
Alan

There are two main reasons why their are video incompatibilities in the newer releases.
1. The way video support was redesigned in 6.2 and above left some cameras incapable of supporting the new video mode in older style hardware. For this reason the Skype special version (6.1.x) was made available. This also resolves video incompatibility issues between very old releases (i.e. Skype for MAC OSX 2.8 and Skype Special Version for Windows allows video communication to occur between contacts vs. just audio)
https://support.skype.com/en/faq/FA12252/why-can-t-i-make-video-calls-on-the-latest-version-of-skype...
2. Bugs/incompatibilities are sometimes introduced in the newer releases like the recently reported issues with Dell XPS model cameras. In that instance, you would have to downgrade to 6.3 or below which does not have that flaw.
Skype 6.3 (the previous release)
http://download.skype.com/msi/SkypeSetup_6.3.0.105.msi
So while it may be highly inconvenient, if you are aware of the above you should be able resolve any video-related issue. I for one have been fortunate as none of my laptop webcams including the one on my Dell has failed to work in any Skype for Windows release.

Why does Firefox no longer work with Slate or AIM?

1. On Slate.com I allow all scripts to run; however, even though most links on the pages work, I can no longer view comments in articles -- the function to open the comments simply does not work.
2. When I load the standalone desktop AIM program, until Firefox 37 I was able to click the mail icon and go directly to my AOL mail; this no longer works, but instead logs me out of AOL and I have to log in again.
I don't know if these are related, but both appeared when I allowed an upgrade to version 37.

Hi, likely something else isn't updated, maaybe Safari?
Is his he version you have, & Safari 5.0.3 or more?
http://support.apple.com/kb/DL1575

MSI Gaming App Not Working - Fails to open after install - Want to use OC mode

Hi, well today I just recovered my GPU from a near fry using MSI Afterburner. Luckily, with help from a moderator on this site, I was able to get it working again. I thought I fried it trying to OC it. I simply want to be able to switch between the modes it is supposed to come with. I have a MSI R9 290, and it is supposed to be equiped with 3 easy "one click" toggling between OC modes, 1007MHz, Gaming mode, 974MHz, and Silent Mode, 947MHz.
I cannot figure out how to switch between these modes. I used Afterburner and nearly fried my card. I was told not to use that, that is for advanced users, to use instead the (supposed to be bundled, but was not included in my install) MSI Gaming App, to easily switch between the 3 different modes. I downloaded the MSI Gaming App (http://download.msi.com/uti_exe/gamingApp.zip) and installed it. When I tried to run it I get this error:
======
[MSI Gaming App]
The platform does not support this application
(OK)
======
So what does this mean, that the Gaming App is not supported by Windows 7 64Bit Professional (which is what I have)?
Am I doing something wrong, did I install the wrong application. I could not find any others however.
So I damn near fried my GPU trying to use Afterburner to OC my GPU, and I am very hesitant to try using it again. At this point, I have not even reinstalled Afterburner as I fear it might, just by installing, screw me up again.
What should I do, is there anything I CAN do?
Please help this noob- Thanks for your help!
-Kris

based on S/N the card is generic, AMD reference one
those cards don't have factory OC:
http://www.msi.com/product/vga/R9-290X-4GD5-BF4.html#hero-specification
http://www.msi.com/product/vga/R9-290X-4GD5.html#hero-specification
http://www.msi.com/product/vga/R9-290-4GD5.html#hero-specification
http://www.msi.com/product/vga/R9-290-4GD5-BF4.html#hero-specification

MSI Afterburner no longer working in DayZ Standalone

Similar Messages

Maybe you are looking for