Msi Afterburner will not record

Hi every one i am hoping some one can help me as i can not seem to get it working, i am trying to record games (watchdogs and bf4) with msi afterburner but i can not get it to record, i have upgraded my afterburner to 3.0.0 but it still wont work.
Also when i try to screen shot it says "screenshot captured" but yet it does not save to the file location i chose in the settings, as far as i can tell it does not save any where as i can not find it, i really don't know what is wrong, i just want to be able to record my game play but it just wont record any thing, i have set it to record when i press F9 and when i press F9 a blinking camera appears on msi afterburner but i cant get it to stop blinking even when i press F9 again the only way to stop it is to close afterburner and no files still save.
My graphics card is a Msi r9 270 gaming on driver 14.4, would upgrading to amd's beta drivers perhaps get it to work.

Did you set up your capture file where you want it to be saved for both the screenshots and videos?
I use AB version 2.3.1 and it works just fine.

Similar Messages

HT1222 Having problem with Notes at time will not record dictation on iPhone?

Having problem with Notes at time will not record dictation on iPhone?

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help have your phone examined by an apple technician. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

I dropped my mac pro. The disc drive plays but will not record. medium drive error. How hard is it to replace the drive my self. i see screws on the bottom. Could I just order a new internal drive and replace it? Or is it too complicated for the average ?

I dropped my mac pro. The disc drive plays but will not record. medium drive error. How hard is it to replace the drive my self. i see screws on the bottom. Could I just order a new internal drive and replace it? Or is it too complicated for the average person? Would be cheaper to buy an external drive than to replace internal one? Any advice is appreciated

How certain are you the superdrive ONLY is at fault?
That depends on your skill level, if you grew up tearing things apart and putting them together, its absurd how easy it is.
For some however its too daunting. On a general skill level for the "average" person its about a 3 out of 10 in difficulty.
Can you order same? yes.

Captivate will not record ALL screen movements

I have been using Camtashia and recently move to another
company where they want to start using Captivate. I just bought
Captiveate and I am getting very aggrevated! Captivate will not
record all my movements with the mouse or when a screen changes. It
appears that everything is driven by an actual mouse click. Only
when I move my mouse around and then click will it actuall record
the "action".
Please tell me there is a way for Captivate to record all
mouse movements, keystrokes, changes in applications just as I see
it when I am actually doing the recording.
I dont need all this fancy highlighting and project wizards,
I just simply want Captivate to record EXACTLY what I do and see
while I am recording.
PLEASE HELP!

Hi Tmy8ster and welcome to our community
No doubt you are frustrated if you are expecting Captivate to
behave like Camtasia. Yes, both create similar output, but both
accomplish it in entirely different ways.
Perhaps the following link to a thread where I attempted to
explain it will help:
Click
here to read the thread
Cheers... Rick

Hp Pavilion dv6120ca with Hp ExpressCard Digital/Analog TV Tuner in Windows 7 32bit, will not record

I have a Pavilion dv6120ca notebook with the HP ExpressCard D/A TV Tuner running Windows 7 - 32bit
All installs and works fine except that it will not record with either Windows media center or HP quick Play.
Can anyone help

An update from my original question;
I have now got the tv tuner to record with quickplay, but still unable to record using Windows Media Center

Audio track will not record - picture is fine PE9

PE9 audio track will not record. Tried in several projects - audio gets through to computer - but the audio is not being recorded. Help please.

Hi ATR
Was transferring a client's DVD-R into my Adobe PE9 to do some editing requested by client.
The audio from the DVD was coming through clearly on my computer speakers but when I finished tranferring I stopped recording and discovered the video track was fine but there was no audio track.
Tried recording said DVD into some of my other files on PE9 but same thing.
Since posting my cry for help I uninstalled PE9 and reinstalled it.
This appears to have fixed the problem as I am now transferring client's DVD-R once again.
A quick check after a few minutes revealed the audio track is now being recorded with no problems!
Thanks for your interest.
Kind regards
David

My pavilion g7 says my microphone is enabled but will not record on skype

my pavilion g7 says my microphone is enabled but will not record on skype
HP Pavilion g7-2250sh Notebook PC
Serial Number: [edited Serial Number by Moderator]
Product Number: C5T08EA

Hello @Pistaba1975,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the microphone on your notebook is enabled, but will not record any audio on Skype. I would be happy to assist you in this matter!
Are you able to record audio using a different program on your computer? Were you able to record audio from Skype in the past?
In the meantime, I recommend following the steps in this document on Resolving microphone problems (Windows 8). This should help enable the audio-in when using the microphone.
Additionally, I also suggest following this resource on Microphone Troubleshooter to ensure that your Skype software is communicating the audio being transmitted to your audio-in device.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

MSI Afterburner "randomly" stops recording

I have an issue with an old version of MSI Afterburner. I use it to record gameplay, and the software would often stops recording anything, even if I press the key to stop the recording and start a new one. I have to actually leave the game and restart MSI Afterburner to get it to work again. The last video captured by the software would usually be corrupted and unreadable.
I think I know what's causing the problem, but I don't really know how to fix it : it happens from time to time, when a loading screen appears. MSI Afterburner would just completely cease to operate somewhere during the loading, with no warning, and now way to fix it without restarting the whole thing. I'm using version 3.0.1.
Yes, I know I should update MSI Afterburner, I'm actually doing that just now, but I'm especially interested to know if this is a known issue at all, and if that's the case, if it has been fixed in the latter versions. If not, is there any workarounds to it, besides stopping the recording each time there's a loading screen ? That would be impractical.
Thanks in advance for your answers. ^^

Same problem occurs with 4.0.0. How can I fix it ?

Msi object will not install with non-admin user

I've created an MSI object for the Flash 9 plugin, which installs okay
on the workstation when I login with an admin user. It will not
install when logged in with a normal user account. I have set it up as
an unsecure user and given the workstation R and F rights to the msi
object, but I'm still getting a 1603 error code.
Any suggestions?

http://appdeploy.com/packages/detail.asp?id=798
You will see the ZENworks reference on this page.
I would bookmark this site :>
I almost always check it before deploying a new package to see if it is
listed. Helps me find issues before the issues find me :>
[email protected] wrote:
> I've created an MSI object for the Flash 9 plugin, which installs okay
> on the workstation when I login with an admin user. It will not
> install when logged in with a normal user account. I have set it up as
>
> an unsecure user and given the workstation R and F rights to the msi
> object, but I'm still getting a 1603 error code.
>
> Any suggestions?
>
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCN

Msi 6511 will not boot

I received an msi 6511 and it will not boot, I only get a light on the floppy but I can not tell if the other leds are on because they are not hooked up (I do not have the manual to this board)!! The specs are
1.2 GHz amd athelon
384 mb pc100 sdram
onboard sound
onboard video
450 watt psu
Any help would be much appreciated!

Hi
Your athlon could either have a 100 fsb or a 133, they came both ways. If it is one with a 133fsb then the memory (PC100) is not fast enough to let it boot. Set jumper J6 to pins 2-3 for a 100mhz fsb so that the cpu fsb will match the memory.
See attached link for jumper settings if you don't have the manual. This appears to have been an oem motherboard used by packard bell among others.
http://www.uktsupport.co.uk/pb/mb/explorer.htm

Captivate 4 will not record software simulation with Windows 7

Hi,
I have a Dell M6400 labptop, 32-bit, operating system is Windows 7. The patch I downloaded through Help->Updates-> on Captivate fixed
my microphone problem, but did not help the software simulation problem.
I get as far in the process as having the screen setup with the red bounding box and controls visible. After choosing automatic I then click on the record button. There is a shutter sound, but it won't save anything. I get back to Captivate and it has not recorded anything.
I then installed it on my main computer which is 32-bit and uses windows xp. I did exactly the same thing as my above mentioned laptop and it did the software capture beautifully. So it must be the Windows 7.
I am disappointed that the patch didn't fix that. Will one be coming soon that will?

Okay, I have been trying to use Photoshop CS4 Extended as my software simulation. It refused to work on Captivate 4
numerous tries, but now for some reason it is working fine. The only thing that I did different was to go into Photoshop's
preference-->performance--> and the openGL was unchecked and I checked it. I think that Photoshop had a problem and turned off the
the openGL. I have the latest update for my graphic card, so I'm not sure why it affected the GPU.
I didn't think to try other programs, but now I have, and they are working fine too.
It could be that the problem was with Photoshop instead of Captivate.

CD-RW will not record at max speed

I have just bought a MS-8348B CD-RW (48x 16x 48x) which has worked fine for the past week. However, it will not write cd's at 48x speed anymore. Whenever I try to use Nero or EasyCD Creator, I get a no seek error.
This happens right at the start of the copy. The drive speeds up then slows down continously.
I am using TDK 74min and EMTEC 80min cd's which are both 48x certified but do not work (even at the lowest speed). When I try to copy to a 24x certified cd, there are no errors and a perfect copy is created?
Please could someone tell me what the problem is here? Which 48x will work with this drive?
Thanks
Andrew

Quote
Originally posted by bendan102
i have the same problem, except i think my problem is a bit worse, even at 16x the burner ruins over half the cds i put in it, it didnt even burn with 40x Memorex cds.....i cant return it to the reseller...is there anything MSI can do about this? the burner is going to cost me more in blanks than the burner itself...this is so stupid.
If you cannot return it to the reseller then you should probably send it to msi themselves and see what they can do.
My drive was sent to MSI from the reseller but has not come back yet. It was sent three weeks ago as well!
Don't bother e-mailing as they dont seem to reply eithier.

Soundbooth CS4 will not record files

I am having an issue with Soundbooth CS4 not recording a file. I can open the record box and select my audio source (Alesis USB mixer in this case) but when I hit record nothing records. The record button does highlight however no audio is record or wave form shows.... Ive tested the setup (Alesis USB mixer into my MacBook Pro) with Audacity and it works fine, all settings are correct with the Soundcard and with OS X.. Ive been recording into Audacity, saving, then opening in Soundbooth to do processing. While this works, I would like to get my moneys worth out of Soundbooth and do all my recording, processing, and editing in the same app. I've attached a photo of the screen for you to review...
Thanks in advance for any help you can offer.

Hmm. So when playback is fine but record just hangs, it's often a clocking issue. Is this device one of the MultiMix systems? If so, what version of OS X are you running and have you updated the drivers for the device? I know there were some problems with Alesis support on OS X 10.5.5 or 10.5.6 and they released some updated drivers on their website to address the problems. That would be my next recommendation.
If that fails, we may want to create a custom Aggregate Device with limited inputs to troubleshoot this. You can do this by launching "Audio MIDI Setup" (located at /Applications/Utilities/) and chooseing "Aggregate Device Editor" from the menu. Here you can create a new device and specify only a specific set of inputs and outputs from your Alesis, choosing which one you'd like to act as the Master Clock. After this is created, select the new device in Soundbooth's Audio Preferences and see if you get different behavior.
We do have an Alesis MultiMix 8 around here, but it's currently locked in a coworker's office who's on vacation until Monday.
Durin

MSI R5750 Will not display during boot, crashes on update

Hello,
I recently upgraded my PSU and VGA for my computer and am using a generic LCD monitor (hp L1925). When I installed the VGA, it will not send any video output unless the monitor is first plugged into the motherboard's video. When I plug the monitor into the VGA, everything runs fine, the VGA works well. However, when I try to either install or uninstall drivers, part of the monitor turns black and then loses picture. Live Update has my system at the latest version of BIOS for both the motherboard and VGA. Any ideas?

I swapped out the video cable between the monitor and the vga, now everything is working very well. Thanks.

MSI K7N2 will not boot system.

Ok, here goes. This is a brand new system from Newegg.com. I have already RMA'd the board once. Both times with a brand new board, the system will load and allow me into BIOS. The first board simply reset itself after 12 seconds, and wouldn't come back on. The second time, after restarting the computer (with no changes), it shows a black screen only.
The fans move, but nothing comes on the screen. The system doesn't make any kind of usual startup sounds.
In the previous board, I tried plugging a Duron 850 (a chip I know works) into it and got the same result, so I am fairly sure the CPU is good.
System specs:
350 Watt PSU (I believe generic)
2X 512MB PC2700 Kingston value Ram
AMD AthlonXP 2100+
80 GIG HD
20 GIG HD
2X CD-ROM
Radeon 9500 Pro
I have tried booting the system with no ram and nothing but the video and HD plugged in, and got no beeps. I have tried every damn thing I can think of. Changed jumpers, unplugged and reseated everything, used onboard video, everything.
Can anyone help? I cannot get anything to appear on screen, a case of the system not booting.

I don't have the PC right in front of me (I'm at school now), but I do remember that it is a 350 watt PSU with a 3.3 rail that does 24 amps.
I have tried one stick of RAM.
The weird thing:
I tried unplugging the PC and the BIOS battery for about 10 minutes. Afterward, the computer started with my HD's and CD-ROM's attached. However, after loading bios and switching the FSB to 133 (with my Athlon 2100+), the system wouldn't reboot.
I again unplugged and waited. This time, I simply loaded BIOS and restarted the system. Same lockup-no boot thing. I repeated this twice.
I left the battery out all for around 6 hours overnight, and now the computer will not start again. I'm sooo frustrated...

Msi Afterburner will not record

Similar Messages

Maybe you are looking for