MSI AMD board which supports AMD mobile ?

Is there a MSI Mainboard which supports an AMD Mobile ? Does anyone of you have any experience with that combination or does anyone know a (desktop) mainboard able to run that combination ?
Thanks for any answers.

I have never understood why BIOS chips aren't all  pop-in/pop-out replaceable. Then a screwdriver and $30 check to BADFLASH would update the BIOS with the threat of bricking a system that might take weeks/months to reconstruct. That's just panding to DELL/HP/LENOVA/MS & a bad attitude from the mobo manufactures. 
I will take your advise and look for recently manufactured boards, tho getting a serial number from NEWEGG  or TIGER DIRECT would be like getting a Lords-prayer from Beelzebub! 
Quote from: XFM on 04-November-14, 14:34:22
I can't recommend any particular MB for you but can just say do some research on MSI website for Z87/97 MBs for BIOS vs CPU support. Also keep in mind that recently manufactured MBs will have the later BIOS on them from the factory. You can determine if the MB you decide on has a later BIOS from the serial number if the store you buy it from will provide you the S/N (from date code in S/N) when purchased. Flashing the BIOS if needed isn't quite as bad as it might seem if you ask for help on this forum before attempting to do it. There's a right way and wrong way to do it and using Live Update is by far is the worst way, instant expensive paperweight is the usual result by using Live Update.

Similar Messages

  • KM4AM-L and AMD mobile XP2400 (35W)

    OK, since the AMD64 35W doesn't seem like it will work in any micro-ATX boards, I'm trying to find a board that supports AMD XP 35W.
    Will this processor: http://www.excaliberpc.com/product_info.php?products_id=3767
    Work in the KM4AM-L? Keep in mind I have no plans to do any overclocking, this is for a cool and quiet home theater PC in a small Flex-ATX case.
    Should it work?  Has anyone actually done it?
    Thanks!

    I was selling my old 2000XP & decided to get the mobile 2400+, I also just pawned off my old microAtx MSI K2M? combo board so I grabbed the KM4AM-L it's suposed to support all of the bartons & basically eveything up to the 400mhz cpus.
    Well it doesn't support the mobiles at all....
    It boots up & recognizes it as an Athlon Mobile XP @ 600 mhz & feeds it 1.65vcore which is severely out of whack.
    Since the board has no manual options for the multiplier the best you'd be able to do is run it at 200mhz fsb x 6mult = 1200mhz, but the voltage would still be way high & you'd generate lots of unnecessary heat...  So, it's not a good thing.
    The questions for MSI are:https://forum-en.msi.com/images/msi/smilies/confused2.gif
    confused2
    1 - why program the bios to recognize the cpu name at all if you aren't going to support it with proper multiplier settings.
    2 - unless the voltage regulator on the board won't go low enough for the mobiles why don't they work.
    I've got another full ATX board that seems to understand the mobile so that's where it'll endup but I was hoping to build a HTPC system with a fast & cool chip running at stock speed under a nice quiet heatsink/fan combo.  It's a logical use for an otherwise sweet microATX board.

  • MSI AMD FM1 A55-P33 - won't install windows 7 32bit

    Hi there,
    we have board the MSI AMD FM1 A55-P33 motherboard but for some reason we cannot install windows 7 32bit on it.
    What does install flawlessly is:
    All Windows7 64bit
    Windows 7 Starter 32bit
    We ( and also the local supplier here in South Africa ) have test the following components:
    Power Supply
    Ram
    Ram Ports
    Alternate Ram Manufacturer
    DVD Writer
    Hard Drives
    Graphics Card
    Onboard Graphics Alone
    Board is running latest bios update.
    and it still does not install.
    They supplier  has ordered in and tested the same model motherboard and it still does not install.
    For me that means it could be the motherboard model or the cpu ( which is still being ordered in so an alternate can be tested )
    When i say doesn't install, it installs until the very end where the installation restarts and goes into the installation one last time to finalize things
    and then it throws a error and you can't complete the installation.
    The local supplier has had the computer for 2weeks now with no success,
    I was hoping someone here could assist us with a few suggestions.
    Thanks to any advice given .

    what is the exact error received?

  • Amd mobility radeon hd 5000 series code 43

    I am getting a code 43 for my amd mobility radeon hd5000 series.

    Same quastion but longer:HP Pavilion dv6 No Second Monitor with Widows 10With W7 I use a Pavilion 23xi Monitor via HDMI in addition to the lap top screen.On upgrading to Windows 10  only the Laptop screen  is enabled.Looking at device manager and HP System info I see that the laptop screen is being driven by the  “Graphics device 2:  ATI Mobility Radeon HD 4200 Series”, Device Manger reports “No drivers are installed”.“Graphics Device 1: AMD Mobility Radeon HD 5000 Series” in controlling nothing and DM reports, with a yellow exclamation mark, “Windows has stopped this device because it has reported problems. (Code 43)”.Presumably why I have no second monitor output?Any view on how to fix? “Update drive” says I’m running the latest driver. No luck with the ATI update software either.Another question is given that googling seems to say that the 4200 is not supported in W10 could this be a root cause of the 5000 problem and an indication that I’ll never get dual monitors back (which means going back to W7 or a new PC)? Or is it simple a matter of coaing the 5000 driver back to life?Any thoughts appreciated. Even if only to say me too.Thanks,Dean.

  • [GUIDE] Update AMD Mobility Radeon drivers to fix graphics issues

    I made this small guide because some topics on this forum are about this problem and there is no official step-by-step solution from HP. So, how to fix your laptop's graphics issues by updating drivers for AMD Mobility Radeon HD GPU to latest version from AMD?
    1. Install latest BIOS for your laptop from HP.http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Official-HP-statement-on-Switchable-Graphics-and-Open-GL/td-p/766285
    2. In BIOS set Switchable Graphics Mode to 'Fixed mode'.http://imageshack.us/photo/my-images/268/79500144.jpg/
    3. Install latest graphics driver for your laptop from HP.http://www8.hp.com/us/en/support-drivers.html
    4. In Catalyst Control Center make sure that active GPU is 'High-performance GPU'.http://imageshack.us/photo/my-images/853/cccv.png/
    5. Download latest version of Mobility Radeon drivers for your operating system from AMD.For now, I recommend version 12.6:- for Windows 7 64-bit:http://www2.ati.com/DRIVERS/mobile/12-6_mobility_vista_win7_64_dd_ccc.exe- for Windows 7 32-bit:http://www2.ati.com/DRIVERS/mobile/12-6_mobility_vista_win7_32_dd_ccc.exe
    6. Install AMD driver on top of HP driver. This installation will update AMD components to latest version.
    7. Enjoy graphics performance as if it was properly supported by HP.
    Solution for HP:
    Release new driver each time AMD makes a new release within 1 week maximum. Hard? But this guy does nearly the same. Alone and for free. http://leshcatlabs.net/ OR simply ask AMD to provide direct links to new drivers like in an example above (see point 5) and sticky these links with a step-by-step instruction on this forum.
    Problem solved. With kudos from Russia. Alexander.
    P.S. Does this guide work?
    http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Video-Card-Drivers-AMD-Radeon-HD-6770M/m-p/1405781#M43216
    http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/7690M-GPU-HP-HORRIBLE-DRIVER-SUPPORT/m-p/1403429#M43109

    hey there, i ve recently bought the g6-1304sv notebook first things i did when i got it was all the updates, both the windows 7 updates and the HP assistant updates(that basically gave me the new bios and i guess new drivers for graphics) when i got into the bios and actually switched it to fixed mode the notebook gave me a bluescreen (i could only get into the pc in safe mode through which i uninstalled drivers for both the onboard and the amd card in order to actually get back in the pc normal way) the strange thing after that  was that it didnt give me the catalyst center on the right click and when i downloaded and installed the latest it would say that catalyst could not start because it couldnt find the card (or sth like that) updated drivers for amd etc but still nothing. what i did then is creat backup cds and restore pc to factory settings. (does that remove bios update? dont think so)From that point onwards everything works fine and im now using the amd card no problemwhat worries me is the hp assistant messages saying that i need to update urgently. will that mess everything up again?i hope this helps others and i hope you have an answer for me thx in advance and for the guide!!!

  • Help... my KM4M-L displays Athlon Xp 2000+ as AMD Mobile Athlon 800

    Hi guys,
    I'm using the motherboard KM4M-L (MS-6734) with CPU Athlon XP 2000+ but it always displays my CPU as AMD Mobile Athlon 800 MHz even though I've already set the jumpers for cpu speed to 133. When I tested setting the cpu speed to 100 it showed my cpu as AMD Mobile Athlon 600 MHz so I assum that the multiplier has been set to 6 from the factory. But wait... it doesn't have the jumpers for setting multiplier! Or the motherboard sets multiplier automatically? What's wrong with my motherboard or cpu? (I'm sure my cpu is Athlon XP 2000+, I've checked by installed it to my friend's machine and that machine displayed the cpu correctly). Could anyone pls help?

    I concur with Nick. I'm also running the KM4M-L with a 2500+ (pre-week 3/39 unlocked) and there's no way to set multi or FSB in the BIOS.
    I've blown the 3rd and 5th L3 bridges on the chip which gives it a default multi of 13 instead of 11. Not much of an overclock, but 2.16Ghz (instead of 1.83Ghz) is about the best I'd expect from default vCore.
    Also, just to point out, the Mobile chips (at least in the case of my 2400+) default to the 6x multi, even in my NF7-S 2.0 board. I believe due to the PowerNow technology, they are set to start out at a minimum of 6x multi and can throttle up to as high as 13.5 depending on temp and power settings. (ie. remaining battery life)

  • AMD Mobility Radeon HD 5000 Series for windows 8.1

    Hello,
    I just updated my pc's operating system to windows 8.1.
    The AMD(AMD Mobility Radeon HD 5000 Series) and Intel(Intel(R) HD Graphics) graphics adapters installed automatically when I connected to internet.
    I then tried updating the drivers and it tells me that drivers are up to date.
    But the pcs is incredibly slow. and when I shut it down and try to boot back, it fails to start
    on about three attempts and finally gives me an uption to restore the system to previous state.
    After successfully restoring the pcs, I then disabled the AMD graphics and the system boots successfully
    and the performace improved slightly but not up to normal.
    How can I install the suitable drivers for the display adapters and have the pcs perform fast as it should.
    Or advise me on any alternatives or other  possible solutions to get the pcs performing well and fast.
    Pcs Information:
    Name: HP Pavilin dv3-4048tx Entertainment Notebook PC
    Serial Number:   [Moderator edited Serial Number]
    Product Number:   XG158PA                                                                                                        

    Dear Customer,
    Welcome to the HP Consumer Support Forum!!
    Please try and install the following Catalyst Software Suite for display issue:
    http://support.amd.com/en-us/download/desktop?os=W​indows+8.1+-+64
    Also perform the steps mentioned in the links below to increase the system performance:
    http://windows.microsoft.com/en-in/windows/improve​-computers-performance#1TC=windows-7
    http://www.computerworld.com/article/2484556/micro​soft-windows/how-to-boost-windows-8-performance.ht​...
    Hope this helps, for any further queries reply to the post and feel free to join us again.
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    GR1
    Although I am an HP employee, I am speaking for myself and not for HP

  • Solution of dv6-3040ee and 8.1 with vCards Amd mobility radeon HD 5000s and Intel HD Graphics

    With my windows 8.1
    If I setup the two vCards Amd mobility radeon HD 5000s and Intel HD Graphics
    the windows can't open unless I uninstalled one of them
    but I need a solution allow me adjust brighness that not found in AMD card but found in Intel vCard
    and the most of games Intel can run it but AMD can
    Help !!
    Now I'm installing The two cards but if i restarted my laptop it wouldn't run
    The photo show that ...
    http://www3.0zz0.com/2015/04/07/21/289209638.png

    Hi there @ZezoOo 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are looking for help with your video drivers for the adapters in your notebook. Unfortunately, after doing some searching, it appears that Windows 8.1 is not a supported operating system for this notebook. HP customized drivers are only available for the Windows 7 operating system.
    Please see the following, for some guidance.  HP Products - What If I Don't See My Operating System?
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Hp dv6 3050ee AMD mobility radeon hd 5000 (5650) series and intel(r) HD Graphics draver

    У меня - HP dv6 3050ee, видео - Mobility Radeon AMD HD 5000 (5650) серии и Intel (R) HD Graphics Draver, пытаюсь установить драйвера для Windows 8.1 (! Их нету)
    Но как только автоматически устанавливаются драйвера, начинает перегружаться компьютер! Сейчас я работаю с отключенными видеокартами, в другом случаи начинается перезагрузка компьютера, подскажите что можно сдлеать? Сейчас у меня полностью отключена и удалена - AMD Mobility Radeon HD 5000 (5650) серии, а Intel (R) HD Graphics Draver - работает без драйверов ((( .
    Большое спасибо за помощь.
    I - HP dv6 3050ee, video - Mobility Radeon AMD HD 5000 (5650) series and Intel (R) HD Graphics Draver, try to install the drivers for Windows 8.1 (! They do not have )
    But as soon as the drivers are automatically installed , the computer begins to reboot ! I am currently working with disabled graphics cards , in other cases begins to restart your computer , you can tell me what sdleat ? Now I have completely disabled and removed - AMD Mobility Radeon HD 5000 (5650) series and Intel (R) HD Graphics Draver - works without drivers (((.
    Thanks a lot for the help.

    Hi @Jiko ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-3050ee Notebook and issue with Graphic drivers for Windows 8.1. You system shows me that the drivers are only available for Windows 7 on this machine. Updating to Windows 8.1 would rely on Windows 8 drivers only and you would lose some of the enhanced effects on this Notebook.
    No, you can not use the Notebook without drivers installed. 
    Have you tried to just update the drivers in the Device manager on Windows 8.1?
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • MSI AMD 970

    I'm trying to install windows 8 in a MSI AMD 970 and I get the followin issue:
    Secure Boot isn't compatible with your PC
    Your PC's firmware doesn't support Secure Boot so you won't be able to use it in Windows 8.
    I haven't found any information in anywhere, please help me

    do a clean W8 installation [not upgrade]

  • MSI AMD 125W/140W CPU Ready Mainboards

    MSI AMD 125W/140W CPU Ready Mainboards
    For more recent update list, click here:

    Thanks for the response, it was the reply I didn't want to hear but was totally expecting.
    I have accepted that the only way forward now is a motherboard upgrade.
    The downside of this is that I have lost faith in MSI, and while I recognize that the fault here lies with the retailer who sold me this bundle I do not wish to be burned againi.
    If anyone can recommend an MSI Motherboard capable of running the FX-6100 for a reasonable price, and can vouch that the throttling does not happen without the need for a third party cooling solution... then I will look into it. If not I have found a Gigabyte branded motherboard capable of 125w CPU's with good reviews for a similar price to the 760GM-P23.

  • Msi Amd Radeon HD 7850 blackscreen problem

    In games only (i play Hitman Absolution now) i run everything on ultra fps is just fine,just i get blackscreen with sound loop and i only need to hard shutdown,its randomly happens,my pc is new,1 month old,what should i do? i've updated graphic drivers to newest,i tested with disabling sound in control panel for 30 minutes,and nothing happens,maybe its sound i dont know,i found so many problems on internet like mine
    Graphic: MSI AMD Radeon HD 7850 Series
    Processor: Intel (R) Core(TM) i5-3450 cPU @3.10 GHz 3.10GHz
    Installed memoory (RAM): 8.00 GB
    System type: 64-bit Operating System

    he need to have quality PSU for the card to handle it
    Quote
    and what if dont crash ?
    then the issue is in your PC
    Quote
    and what if crash ?
    then problem is in the card and you need to rma it
    Quote
    maybe its because of skidrow,but i dont think so...
    what is skidrow?

  • Hp pavilion g6 2231tx ( AMD Mobility Radeon HD 7670M ) latest update driver link pls

    AMD Mobility Radeon HD 7670M [ hp pavilion g6 2231tx ]
    this is my graphics card model number pls update driver download link provide pls......

    Hello @dKthegr8 ,
    Welcome to the HP Forums!
    I understand you're looking to update the GPU drivers for your notebook to the most recent versions.
    In order to use the switchable graphics feature of an HP notebook, you must use the drivers that are provided on the HP - Drivers & Downloads website. These drivers are not always the most recent but are the only drivers that will allow the GPUs to work properly.
    Sorry for the bad news.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Problems with AMD mobility radeon hd 2600 in Satellite A210-103

    I've got a problem with my graphic card. The computer doesn't find any graphic card. I played on Windows Vista again a few weeks ago, and now the graphic card disappeared.
    I allready downloaded new display drivers, but nothings working.
    Can anyone help me with my problem?

    Hi
    Please check the driver from other notebook models which are released with the same GPU.
    I found these notebook models which support the same graphic chip:
    Satellite A200 PSAE6E
    Satellite P200 PSPB6E
    Satellite Pro A200 PSAE7E
    Satellite Pro P200 PSPB7E
    Greets

  • Need url for info on msi 6905 master, which is a slot1 adapter on m/board GA6 MM

    need url for info on an msi 6905 master slot1 adapter(cpu holder)

    http://www.msi.com.tw/program/support/download/dld/spt_dld_list.php?kind=1&CHIP=17&NAME=Archives
    you have the number wrong some were
    6905 is to high a number for a slot 1 board

Maybe you are looking for

  • Language Settings in Unattend.txt Win8.1 OSD not working properly

    Hi fellow suffers :) Although I am using the following unattend.txt within my OSD TS Win8.1 is still asking to confirm the "Region and Language" manually at the end of the setup (even if I am choosing english)... what am I doing wrong ?! I am not usi

  • Batch Program to update data in SQL Server Environment

    Dear Experts, My current scenario is that SAP ECC must send a mass update to an external Data Base (MS SQL Server) in a scheduled Batch Process. The solution that I have thought is: Batch Process to go through an ABAP table and to trigger a Web Servi

  • Problem while Calling Webservice from ABAP

    Hello All,              I am Calling the Webservice using ABAP-Class from abap,i getting the following HTML response error from the Webservice.Can any one help me. tional//EN">###### ####td {font-family : Arial, Tahoma , Helvetica, sans-serif; font-s

  • Aperture 2.1 library on ReadyNAS fails

    Photos fail to import into my library located on my ReadyNAS. I have all my picture files on the NAS and was successful in importing referenced photos into my library (located on the NAS) in Aperture 1.5, Upgrade to 2.1 and now they will not import i

  • DV9720US - Speakers won't mute with headphones plugged in.

    I am running XP instead of the Vista it came with. I have all the drivers but one work..(other devices> unknown device) with yellow !?  I can't use my headphones because speakers won't mute. Is this a hardware problem, or something electronic broken,