MSI ATI radeon can't detect 2nd monitor

the monitor is on & working but neither Windows Hardware or the ccc detect it.
here's what I have-
Dell inspiron 530 w/ intel core(2) duo procssor 4Gb ram @ 2.20GHz
Windows Vista Home Premium sp2
MSI ATI Radeon 6450
Belkins f3006-01 vga splitter
monitors are 2 similar Gateway vga/dvi monitors.
all I want to do is extend the screen or slide pop-up windows to the 2nd screen for digital audio recording software(DAW). NO GAMING.

A closer reading of the safire 7950 Mac edition site (link above) says they want to see a Mac Pro 4,1 2009 or better.
System Requirements
Mac Pro with Mac OS X 10.7.5
CD-ROM or DVD-ROM drive for installing software
Mac Pro with Mac OS X 10.8.2 or later
2 GB RAM, Early 2009 Mac Pro (MacPro4,1)

Similar Messages

MSI Ati Radeon HD4850 512 Mb. & AMD Radeon HD6850 1GB GDD5 CrossFireX Possible?

Hello everyone! In this new topic, I'll try to capture a doubt that I have a few weeks ago! The question is this, I have a video card MSI ATI Radeon HD4850 512MB and XFX Ati Radeon 6850 1GB GDDR5, and my question is whether these two plates can be joined to form a CrossFireX, ie the two plates running in simultaneously. I had the opportunity to read in other forums, there are people who form a CrossFireX, with the video card that comes in the motherboard, ie onboard plate ... I can say? From already, thank you very much!

this probably will not work, the card is too old
http://sites.amd.com/PublishingImages/Public/Graphic_Illustrations/WebBannerJPEG/AMD_CrossfireX_Chart_1618W.jpg
don't even see any 4xxx in the list

MSI ATI Radeon 1800 GTO

If anybody have msi ati radeon x1800 gto please upload your original bios!

Quote
A Vid Card is not a Mobo, there is little to be gained on a Vid Card by Modding or Flashing the BIOS for any reason. Do what BK said.
Well, that's not true as you can gain a lot by modding a vid card by bios if you know what you're doing of course....
hammer_ns, if MSI tech can't help you try with a different manufacturers bios as those x1800GTO's are all just standard design. If you need one pm me.

P-2120t + MSI ATI Radeon HD6450 1 GB?

P-2120t
Win7 Home 64
Currently have standard on-board graphics ...wondering if adding a MSI ATI Radeon HD6450 1 GB card will improve the video in any significant way. Can pick one up for $32.
Thx.

Such a Radeon HD 6450 is offered as an upgrade for your pc:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03188862&cc=us&dlc=en&lc=en&product=5193517
But OEM-cards can differ in the specs from marketplace cards, AMD says that the card requires 400W psu:
http://www.amd.com/us/products/desktop/graphics/amd-radeon-hd-6000/hd-6450/Pages/amd-radeon-hd-6450-...
You have to try ... maybe you have to upgrade psu too.
*** Say 'Thanks' with Kudos ***

MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP) problems

i recently purchased a MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP)
it says it can automaticlay download new bios etc using MSI live update,
but when i click on VGA Bios, it says my card does not do this??? how do i check the bios and if there is a new one available?
any ideas?
ive heard you can unlock the MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP)
from 8 pipes to 12 pipes, how do i do this
also any idea on what the best drivers are for a MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP)
catalyst?
omega?
MSI std drivers?
thanks

Jobbie,
The best Drivers for your Vid Card are the ATi Catalyst Drivers.
Take Care,
Richard

MSI Ati Radeon HD4850 512MB CrossFireX

Hi all! My name is Mark, and I've made a topic about how to make RAID 5 on a MSI Platinum DKA790GX
I have a new problem, a few days ago, acquired another HD4850 512MB MSI Radeon exactly equal to that already had, to fomar a CrossFireX, the thing is that this all wrong, and not to do ... I explain how procedures
first of all, connect the new video card to see if it worked and if it works perfect, then connect the 2 video cards to the motherboard, and connect the 2 bridges CrossFireX then lit the computer, and perfect, I noticed dispostivos administrator, and the 2 plates are recognized each other, so here we go perfect, then I went to AMD Vision Engine Control Center, to enable CrossFireX and I went out no option, nothing at all to enable CrossFireX I set if 2 plates were activated, and are disabled, the primary adapter is active, but the other says Disabled Adapter, and do not understand that in the device manager are the two ... Well, I started aa look everywhere solutions and had not, they said that previous drivers again, what I did, but none worked, none tell me the option for CrossFireX ... try using a single CrossFireX bridge but does not work, update the BIOS of my motherboard is a MSI DKA790GX Platinum, and I do not see any option to enable CrossFireX, uninstall video card drivers, use Driver Sweeper to remove the root ATI drivers, and install new ones, and try the old and I do not work ... and do not know what else people did it all, yesterday was Saturday from 2 pm until 1 am and I still can not solve the problem, I need help getting to ride these two video cards, not how , probe around as you can see, and I can not think of anything more!!!
please if anyone can help me, I would be grateful now!
My PC specifications:
Motherboard: MSI DKA790GX Platinum, GPU's: MSI ATI Radeon HD4850 512MB x2, RAM: 4GB RAM Dual-Channel Kingston, CPU: AMD Phenom x3 8650, Power Supply: Cooler Master 750W Plus, x2 Samsung 500GB Hard Disk x2 Western Digital 500GB Hard Disk , RAID 5 System Mounted

Well folks, I have all things settled, the final version I have served for the AMD Vision Engine Control Center was the 11.12 version of the Radeon drivers, which let me install all your applications, also I did a change in Bios, I had updated to version 1.G0 and now go to 1.20 which is older, but has no more errors! so here I have all walked to perfection, with gta 4 walk at 60 fps, and later the only thing I need is to buy 4 more GB of RAM, and RAID 5 disk partition I have for windows 7 64 bit, to have all optimized to 64 bits, since all the components of my pc are for use at full 64-bit, ie, would travel faster, for example, more FPS in games!
although I had no answer, and I had about 20 visits, no matter, thank you xD Like
I send greetings to all from Argentina!
Goodbye!
Gamertag: Markitoo22

How Do I use an Ati Radeon 4870 HD for 3 Monitors

I am new to the Apple world and community. I recently got a new job that requires me to use a Mac Pro. OS X version 10.6.8. 2.66 ghz dual xeon and 32 GB of ram. It has a ATI Radeon 4870 HD. I can run 2 monitors fine using the DVI and Mini DV port ( Using a convertor from apple. ). When I try to use the 2 other HDMI ports for my third monitor, Mac OS wont detect it. The wierd thing is some of the images from certain apps show on the 3rd Monitor.
Under graphics information it shows the Radeon 4870. Under PCIe information it shows the same card. On the back of my machine I have 2 HDMI slots and another lower down with Mini DV and DVI.
The Displays I am running are 3 HP LP2475w Monitors. Running in DVI mode with one converted to Mini DV. The 3rd non working is running in DVI to HDMI but it can be run Straight HDMI if need. Ive tried alot of configuration settings and I can't get the HDMI port to be detected by MAC OS. Ive plugged one in at a time and just the HDMI do not detect.
Please let me know what information is needed to help troubleshoot this better.

A 5770 is $249 or slightly less and in the same dept to me as replacing hard drives, adding some RAM in order to work and because my understanding is it was the first card to support 3 monitors.
The 5770 only requires 10.6.5+ - and the 4,1 had way too many issues with 10.5.7/10.5.8
The 4870 may or may not provide what you need for the software you run, even though 3 yr old machine but 4 yr old plus video card.
flashing:
http://boeglin.org/blog/index.php?entry=entry090918-031702
4870 vs GTX 285 that came out at that time also
http://www.geek.com/articles/games/macpro-whats-better-ati-radeon-4870-or-nvidia -gtx-285-20090720/
The default card was Nvidia GT120 and req'd no power cables and popular way to support more displays.
People were running DUAL 4870s to support 3rd monitor though back then:
http://forums.macrumors.com/showthread.php?t=665034&page=10

Pavilion Slimline 400-034 Windows 8 not detecting 2nd Monitor

Hello, I have a Windows HP computer, and I recently bought a 2nd monitor for my birthday, link click here. I have the same monitor for my first, and that works perfectly fine, when I bought the 2nd monitor, I realized I have a different port, and it's not a DVI-I, it's a DVI-D. So I bought a VGA to DVI-D connector, so I plugged my VGA into the connector and then plug the DVI-D into the tower. I turned on my computer, and the 2nd monitor wasn't detected, the DVI-D connected one, but the first one was. The monitor was set into mode auto, so it detected any working inputs, DVI, VGA, HDMI, and another. The 2nd monitor works thought while into the DVI-I port, but neither work in the DVI-D port. Any help (: ??

Here are the specs for you HP Pavilion Slimline 400-034 Desktop Computer and here is the user guide for your Insignia™ - 24" LED HD "NS-24EM51A14" Monitors. Based on the specs of your computer, it has one DVI-D (digital only) output and one DVI-I (digital and analog) output as shown below;
#3 - DVI-D (digital only) #4 - DVI-I (digital and analog)
According the user guide for your Insignia monitors... VGA, DVI-D, and HMDI inputs are available. Using a passive DVI-to-VGA adapter will work on the DVI-I port because it supplies both digital and analog signals. Using a passive DVI-to-VGA adapter will NOT work on the DVI-D port because it only supplies digital signals. Please remove both DVI-to-VGA adapters and VGA cables and replace them both with DVI-D cables. You can purchase these cables online and at most local retail store such as Fry's, Best Buy, Walmart, Target, Radio Shack, Staples, Newegg, Office Depot, etc. Once you have purchased two DVI-D cables, please connect your hardware as follows;
Computer ---> DVI-D cable ---> Monitor #1
Computer ---> DVI-D cable ---> Monitor #2
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

MSI & ATI Radeon "recovered from a device Failure"

.System:
P4 2.4G 533Mhz
MSI 645E Max-U with Sis 645 DX
ATI Radeon 64 DDR VIVO AGP4x
500 MB DDR PC2100 (266)
80 GB HD ATA100
Windows XP SP1
The system just locks up, Dark screen and after a while turns to 640 x 480 4bit mode and says:
"Microsoft Windows detected and recovered from a device failure. Please save your work and reboot to restore full functionality."
From other forums same thing happens in Gigabyte, asus and via. It looks like asus has allready made a new bios update for there board I hope MSI do the same thing soone ;( ;( .
Aparently 8X havent been fully exploted and there are some glitches. On top of that Windows XP and 2000 have some reflesh problems over 60 Hz (as it says in ati web)
Mean while is up to us to look for workarounds until they do there job. If the Mobos (motherboard) makers dont make the change then it will have to be up to ATI.
Aparrently disabling the Fastwrite on windows helps a lot. So far I have had this problem making a data backup on a DVD-R so two DVD-R wasted.
If you want more info on where I got all this go to:
http://www.rage3d.com/board/showindex.php?s=&threadid=33662452
It looks like NVidia is having the same problem too but sorry cant help you there. go to this link to see if they can help you:
http://www.tek-tips.com and search for weirdest video card problem thread749-458930

Your video card doesn't support AGP 8x, so that shouldn't be a factor at all. Does SmartGart report it running at 4x?
Did you do a clean install of XP when you started using your mobo?
Has this problem only occured when using your DVD burner? If so, the problem may lie with that.
Only other suggestion... maybe time for a new video card?

8cores+ati radeon hd 2600 xt= missing monitor

hey everyone... i have a little problem.. i had an older powermac with two 24-inch monitors and never had a problem, upgraded computer to the new 8-core one. plugged in both of my monitors and when the computer started up, only one worked... so i plugged them back into my old comp and they both worked.... so i switched ports for the monitors and, the same monitor worked and the other didn't... still with me...
so i reset the pram and smb or whatever it is and it worked...
my computer is on all the time...
so i restarted and guess what, no monitor... reset the pram and stuff and get it back.... shut it off no monitor, reset it and reset it and reset it.. no luck...
anyone follow
lol
help
oh yeah when i open up the about this comp... only one monitor shows as being plugged in slot 1... if switch slots it always says slot 1... ***
Message was edited by: fdotguido

try hot-plugging the monitor cable (unplug, wait 10 secs and plug back in) to see if the system can detect the monitor.

[SOLVED] xrandr can't detect other monitor

Hi,
Here is my problem, I try to make a dual sreen by myself just by editing Xorg .conf files. But I need to detect my second monitor first.
nvidia-setting detects my monitor but xrandr (-q) don't.
Here is the conf file of my monitor :
Section "Device"
Identifier "Default nvidia Device"
Driver "nvidia"
Option "NoLogo" "TRUE"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x800_75.00"
EndSubSection
EndSection
Here is the xrandr -q result
agrum ~ $ xrandr -q
Screen 0: minimum 320 x 175, current 1280 x 800, maximum 1280 x 800
default connected 1280x800+0+0 0mm x 0mm
1280x800 50.0*
1024x768 51.0 52.0
832x624 53.0
800x600 54.0 55.0 56.0 57.0 58.0
720x400 59.0
700x525 60.0
640x512 61.0 62.0
640x480 63.0 64.0 65.0 66.0 67.0
640x400 68.0
640x350 69.0
576x432 70.0
512x384 71.0 72.0 73.0 74.0 75.0
416x312 76.0
400x300 77.0 78.0 79.0 80.0 81.0
360x200 82.0
320x240 83.0 84.0 85.0 86.0
320x200 87.0
320x175 88.0
Since nvidia can make a dual screen with my current configuration, I don't think I have to edit it. But I would like to knwo how to detect my second monitor, get its name, if its a VGA, DVI, CRT ...
Thanks.
Last edited by ApotheoZ (2010-07-03 11:15:17)

@wangcutopen, this thread is half a year old. I suggest you use nvidia-settings to do your setup for your nvidia card. Search the wiki for 'nvidia', or go to nvidia's linux forum. Try google after that.
If all those steps don't work, then open a new forum thread. But only after trying all those.
EDIT: re-opening, misread the dates on the post. My bad.
Last edited by ngoonee (2010-09-06 15:47:27)

Probook 4530s ATI radeon can't install

hi all
after install ati radeon .... black screen appear
and then go to bios to disable switchable to can start windows . with intel Hd3000
i download all amd installation for HP site and Amd Site
probook 4530s core i5
windows 7 64 bit
please help me

Thank you BOSS for your quick response:
I took your advice and reinstalled my OS, but unfortunately stand-by mode is still causing errors. The only difference is that I managed to install the ATI driver normally and no BSOD, so far.
I'm not sure what is causing this, but my humble guess would be that my ATI card is an OEM card which is pulled form a working dell computer and these cards sometimes do not integrate well when installed on non dell motherboards... However, I need to find out that that is absolutely the case before I remove my vid. card from my system
There is a memory dump file that contains the info about this error but I can't decipher...I'm not a computer savvy, but you or someone here my find the root of the problem in that file. If that will be of any help to provide you with I will, next time.
Thanks in advance!!!

MSI & ATi Radeon

Hi!
I am very curious if MSI is planning to manufacture ATi based cards...
Asus did it and now they manufacture nVidia and ATi in the same time...
I think it's a good move because buyers will have a better choice... some like nVidia, some don't... but they all love MSI... so those who hate nVidia can just buy MSI ATi... I think it would be great...
What do you guys think?

not as far as im aware they were going to a while back and then changed their minds
as far as im aware they did built some ati cards for mendion and thats been it
mendion are a large german pc maker ,they were however not for sale seperate

Windows 10 elitepad in Dock can not detect VGA monitor

Windows 10 will not detect my external monitor. I loaded Winbdow 10 on elitepad 1000 about 2 days ago. This is the first time I've tried to use my extenal monitor. My elitpad is in the elitpad docking station.  The tablet id also in the expansion Jacket.  Under windows 81. I was able to duplicate my tablet display on to the external monitor over the VGA jack in the dock. Now tablet can not detect the VGA monitor.      The monitor is an HP2065 using the HP provided VGA to DVI cable.   I've tried rebooting with the monitor diconnected and then adding plugin it in . I've run the detect monitor several times.   Any one got a solution. The new HP support page does not even list tablet as an option for display support. Thank you

            Ok, thats the procedure I was talking about earlier. I did that bios default factory reset just now. First the version 6 and earlier. It didn't work so I tried version 7 and later and that didn't work. I then tried version 6 and earlier again only this time pushed F10 more rapidly and got right in right when I got to the F5 and enter portion. Then I pushed F10 again to save the change and enter again to close. The PC didn't boot up the next screen like the test said it would. So I did it all again and spent some time reading what was on the bios pages but accidently pushed ESC as the bios menu suggested instead of enter to close out   . No boot up screen again. I did another hard shutdown and then unplugged the cord for 5 minutes and this time the PC stayed off when I plugged it back in. The bios are set to default but I cannot get it to start again in safe mode or boot up. So if the power supply is working properly, and the monitor worked in safe mode, then the video card must be good. right?
          So I'm editing from the night before, its Monday morning here in Wi. and I'm sorry to say that after leaving the PC unplugged all night that when I plugged it back in this morning, the dumb thing started again without pushing the  start button.  So the only thing doing a recovery on the bios accomplished was to prove that my the video card can run the monitor in safe mode which is a good thing I guess. Hope someone has an idea as to what else I can try.-------thanks

HP ENVY 700-210xt CTO Desktop PC/windows 8.1: can't display 2nd monitor

Detail information:
- HP ENVY 700-210XT CTO Desctop PC
- One VGA port and one DVI-D port (used DVI-D to DVI-D cable to connect to second monitor)
- video card is a buildin card on motherboard
- Two monitors: AOC 10X16, Acer 12X15 (with both VGA and DVI-D ports) and both working perfectly if connected to computer thru VGA cable.
- When start computer, both monitors showing 'HP' and circle of stars to indicate Window is starting (so I think DVI-D connection and is fine).
- Then second (DVI-D) monitor shows no signal and VGA monitor continues and everything is fine.
- If I go to Devices/Project/Second screen and choose any of the options: Duplicate/ExtendSecond screen only, nothing shows. After awhile, system says can't find second monitor.
Questions:
1) if it is OK to use two different kinds/sizes of monitors?
2) what else I can do to make the computer to use the DVI-D monitor?
Thanks,
Ning

Hi,
If you can't see the basic HP UEFI boot menu information with a DVI connection then you have a hardware issue. It's either your monitors or DVI cable or the DVI port on your PC. It's definitely not a software issue as digital drivers don't get loaded until later in the Windows boot process.
Test the monitors and the DVI cable on another PC to ensure that they work correctly. Alternatively, try a different DVI cable and monitor on your PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

MSI ATI radeon can't detect 2nd monitor

Similar Messages

Maybe you are looking for