MSI BLUETOOTH Setup. Can you HELP??
MSI 845E Max2-BLR (i845E) Mainboard
Hi
Ive just built a system with the above mentioned MSI board, I chose this board because of the Bluetooth option as my friend is in a wheelchair & needed a short range wireless network to connect his desktop PC to his Laptop to transfer files etc. I thought bluetooth was the best option.
We have managed to Install the Bluetooth antena on the desktop end & the MSI USB Bluetooth dongle (Transceiving Key) on the Laptop end, everything Installed ok with no conflicts or problems showing anywhere.
When we go into the bluetooth software however it reports that theres no signal between the two devices, The system is running Windows XP Professional, do we have to setup a network within Win XP?
Im a complete novice regarding Networking or Bluetooth so if somebody whos maybe got experience of setting up this board with bluetooth could guide me through the setting up procedure of getting the bluetooth up & running
my email is: [email protected]
Many thanks.
Just googled "K800i Apple address book bluetooth sms" and found this link
http://www.fscklog.com/2006/09/sek800i_mitma.html
Its in german but copy and paste 10 points into sherlock and traslate to english.
Very simple to follow, took under a minute and now bluetooth sms and calls work a treat.
Have rehashed the clumsy translation and included below for you
1. Backup your address book and quit the application.
2. Right-click on address Book.app - > ' show Package CONTENTS '
3. Continue to go it into Contents/Resources
4 into Telephony.bundle
Right click ' show Package CONTENTS '
5 As before Contents/Resources to advance
6 Duplicate your ABDeviceCommandSets.plist for security
7 Open ABDeviceCommandSets.plist to with TextEdit
8 Search for' K700 '
9 Copy that string line and paste below replacing K700 with K800
< string>K800</string >
10. Finished. Open address book and test sms and dialing
Now telephone numbers can be dialled and sms sent
Enjoy!
Thanks to Leo...
Mike
Similar Messages
-
My iPhone 4s Bluetooth is not working, I have ios 5.1 but just can't get my Sony erricson hbh-pv715 headset to connect to the phone, the phone can't find any Bluetooth device, can you help please
Yes it's in pairing mode, it worked fine with the 3GS but doesn't seem to work with the 4s, my 4s can't find any other bluetooth device, I think the problem ls with apple?
-
Address Book / Bluetooth issue -- Can you help?
I have a Sony Ericsson K800i cell phone and a new black macbook. I have the two devices connected and can use iSync, but I cannot use Address book to make calls or SMS. I also have an old powerbook which works fine with the K800i.
I can only assume now that it is an issue with my MacBook. Does any one have any idea how to get it working? I can get it to connect, but it doesn't want to make phone calls or SMS.
Can anyone help? It would be much appreciated.
-GrantJust googled "K800i Apple address book bluetooth sms" and found this link
http://www.fscklog.com/2006/09/sek800i_mitma.html
Its in german but copy and paste 10 points into sherlock and traslate to english.
Very simple to follow, took under a minute and now bluetooth sms and calls work a treat.
Have rehashed the clumsy translation and included below for you
1. Backup your address book and quit the application.
2. Right-click on address Book.app - > ' show Package CONTENTS '
3. Continue to go it into Contents/Resources
4 into Telephony.bundle
Right click ' show Package CONTENTS '
5 As before Contents/Resources to advance
6 Duplicate your ABDeviceCommandSets.plist for security
7 Open ABDeviceCommandSets.plist to with TextEdit
8 Search for' K700 '
9 Copy that string line and paste below replacing K700 with K800
< string>K800</string >
10. Finished. Open address book and test sms and dialing
Now telephone numbers can be dialled and sms sent
Enjoy!
Thanks to Leo...
Mike -
Really slow and jerky cursor with my apple bluetooth mouse, can you help?
hey.
i have the apple bluetooth mouse and keyboard, they were working perfectly (keyboard still does) until they ran out of batteries one day. i reverted to the wired set up and (lazily) didn't get batteries for a while (month or so). When i did the keyboard responds as before but the mouse is painfully jerky and slow. i have re-paired the mouse and changed the batteries twice, it is so annoying i now use the bluetotth keyboard and wired mouse. any advice/suggestions gratefully recieved.
many thanks.
jamesit is so frustrating isn't it. i now sit looking at the bluetooth mouse whilst getting tangled up in the cable of the wired mouse!! i was going to buy the new wireless mighty mouse hoping that that would solve/bypass the problem but reading what you have all put is definately making me wary of that. it seems so simple doesn"t it, nice uncluttered desk, pretty foolproof technology. if only... seems that no matter how clever these things get they are still not smart enough. i have been looking elsewhere for solutions but no luck as of yet, if i find any i'll let you know.
regards,
james -
Can you help with Tcode to fill this SETUP table? not working for me.
Hi,
For the datasource 2LIS_11_VASCL (SD Sales: Schedule Line Item), I need to fill the Setup Tables via OLI*BW
I understand the * to be the application number, which in this case it is 11 but I get a message that OLI11BW does not exist.
1. Can you help me with the tcode to fill the setup table for 2LIS_11_VASCL?
2. Since there are several datasources with the same application number 11, how do I fill only 2LIS_11_VASCL without filling the others:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
ThanksOk,
I tried that and it basically bring you to OLI7BW as suggested above.
1. At this point, how do you know which of these it is actually filling:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
2. Also, what does it mean when after running OLI7BW wide, with no restriction on my system, still rsa3 shows no records for 2LIS_11_V_SCL?
Any other way to confirm that there may not be any data in 2LIS_11_V_SCL?
Or any way, to make an entry which reflect in 2LIS_11_V_SCL so that I can verify if OLI7BW actually fills the setup table?
Thanks -
Can you help me choose a right bluetooth full keyboard?
So guys, I've bought a brand new 2015 mbp 13 and for my office I need to get a full keyboard.
Logitech has a few really nice, but they have the horrible small usb stick.
Also they have bluetooth but it's not a full keyboard (does not have a numpad).
I can buy a separate bluetooth numpad but I prefer to get something integrated.
May be if you are a designer o a developer does not care for a numpad, but for a mkt guy like me it's basic...
So please can you help me on this?I personally use IX Webhosting for a couple of reasons:
Fast reliable personal tech support by phone, instant chat, & email
They allow unlimited domains "www.yoursite.com", unlimited email accounts, unlimited bandwidth
And, price they are very reasonable plans start @ $3.95 USD a month
http://jeffnitschke.com/IXWebHosting.html -
I am trying to send all of m photos to my iphone from my old phone (Nokia N97 mini). I have paired the devices, the iphone says it is connedted but when i try to transfer the data from the Nokia, i get a message saying could not connect.
Please can you help??
ThanksFile transfer by bluetooth is not supported on the iPhone. There are a few apps in the app store that permit the transferring of photos by bluetooth, but this is only iPhone to iPhone. Fact is, you can't do what you're trying to do, so you can quit trying.
-
Dear all
How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
Thanks
Regards
karanHello
These are the following errors
1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
3.
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
tThere are repeating errors also.
TThanks
Regards
kkaran -
Hi. I am from Greece and I have an I phone 4 and I want to unlock the Bluetooth, because I can’t share files or anything else with another I phone or I Mac or another device. Can you help me please? Thanks.
Answered here:
https://discussions.apple.com/message/19977803#19977803
Re-posting the same question over and over won't change the answer. -
Question
i don't know how to setup FF to open in last session of windows wont let me save current sessions like it used to ask me fairly disappointing can you help m? Phil''want FF to open in last session of windows -- won't ask me if I want to save current sessions like it before''
'''You can still have the old messages''', to make sure you get your tabs restored immediately, but with or without the messages and whichever way you respond to the message you can still get back your previous session through the History menu. (see item #31 "tabslost")
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#tabslost
You can make '''Firefox 6.0''' look like Firefox 3.6.*, see numbered items 1-10 in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 6.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface -
I have downloaded Elements 13 - but when I go to Set-up it initialises the installer, I then say I have purchased and it asks me to sign in. But when I put in my password - I just get four boxes going round in a circle. Can you help ?
Hi Kartikay Sharma,
this happened after I downloaded the PSE13 SW, extracted the zip file and launched the Set-up.exe for the very first time, and on every retry.
It asked for my Adobe Id, and after entering it, those four squares started to circle and never stopped, as described by jeni69.
All I want to accomplish is to convert a photo catalog from album starter edition 3.2 to PSE.
After failing to install PSE13, I downloaded a trial version of PSE12, and installed it successfully. But now I am stuck with a conversion error. (Sorry, don´t have the English version)
Do you happen to know, which version of PSE would be capable of converting an Album Starter Edition Catalog?
Thanks for your help
Cheers, Frank -
Hi can you help with the following panic attack report,
hi can you help with the following panic attack report, macbook pro OS 10.7.3
Interval Since Last Panic Report: 157997 sec
Panics Since Last Report: 1
Anonymous UUID: 7ADCF50C-CC18-405E-9D5C-03325D3A83FA
Thu Mar 29 05:37:28 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff800021d905, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef801a845328, CR3: 0x0000000019452019, CR4: 0x00000000000606e0
RAX: 0xffffff801a8450d8, RBX: 0xffffff800e79f340, RCX: 0xffffff801a8450d8, RDX: 0xffffef801a8450d8
RSP: 0xffffff80a4623e90, RBP: 0xffffff80a4623eb0, RSI: 0x0000000020c85580, RDI: 0x0000000000000001
R8: 0xffffff80008bd890, R9: 0xffffff80058aeac8, R10: 0xfffffe80539a9928, R11: 0x0008000000053d89
R12: 0xffffff800e79f370, R13: 0xffffff8000846288, R14: 0xffffff801a8450c0, R15: 0x0000000000000001
RFL: 0x0000000000010206, RIP: 0xffffff800021d905, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffef801a845328, Error code: 0x0000000000000002, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80a4623b50 : 0xffffff8000220702
0xffffff80a4623bd0 : 0xffffff80002c266d
0xffffff80a4623d70 : 0xffffff80002d7a1d
0xffffff80a4623d90 : 0xffffff800021d905
0xffffff80a4623eb0 : 0xffffff800021daad
0xffffff80a4623ee0 : 0xffffff800023caa9
0xffffff80a4623f10 : 0xffffff800023cb36
0xffffff80a4623f30 : 0xffffff80005a3258
0xffffff80a4623f60 : 0xffffff80005ca448
0xffffff80a4623fb0 : 0xffffff80002d7f39
BSD process name corresponding to current thread: SophosAntiVirus
Mac OS version:
11D50b
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 5720232329361
last loaded kext at 5694112402758: com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3 (addr 0xffffff7f807a3000, size 86016)
last unloaded kext at 248390619372: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f80a4e000, size 65536)
loaded kexts:
com.sophos.kext.sav 7.3.0
com.apple.driver.AppleUSBCDC 4.1.15
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleHDA 2.1.7f9
com.apple.driver.AppleMikeyDriver 2.1.7f9
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.driver.AGPM 100.12.42
com.apple.kext.ATIFramebuffer 7.1.8
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleLPC 1.5.3
com.apple.ATIRadeonX3000 7.1.8
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 513.20.19
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.3.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.1
com.apple.driver.AppleIntelCPUPowerManagement 167.3.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.kext.triggers 1.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.DspFuncLib 2.1.7f9
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOBluetoothSerialManager 4.0.3f12
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.driver.AppleHDAController 2.1.7f9
com.apple.iokit.IOHDAFamily 2.1.7f9
com.apple.iokit.IOAudioFamily 1.8.6fc6
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.kext.ATI6000Controller 7.1.8
com.apple.kext.ATISupport 7.1.8
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController 4.0.3f12
com.apple.iokit.IOBluetoothFamily 4.0.3f12
com.apple.driver.AppleThunderboltDPInAdapter 1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.1
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.3
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.3
com.apple.driver.AppleThunderboltNHI 1.3.2
com.apple.iokit.IOThunderboltFamily 1.7.4
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 412.2
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.3
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.70f5
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.100.98.75.19)
Bluetooth: Version 4.0.3f12, 2 service, 18 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3Get rid of Sophos Anti-Virus software you have installed. Use the uninstaller or:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software. -
I want to install a printer hp laser pro cp1525nw on my macbook air with mountain lion 10.8.2 . I download the drivers from the apple site and install them . I resart the macbook . I just can not add a new printer . the computer dos not start a research
Can you help me?hi . I had the simalar problems of my HP b209a-m printer not being seen on my wireless network> I could not add the printer and could not get the printer to join my network, I found this post at HP discussion and it worked!
Each printer has different options/settings but it seems like the general idea should work ok if you can reset printer back to factory settings and find Printer IP Adress.
This is for HP printers
1. On the printer navigate to the Wireless or Network menu.
2. Select Restore Defaults.
3. On your computer look for a wireless network named 'hpsetup' and connect to it.
4. Print a Wireless Network Test from the front of the printer to see its IP address. (on my b209a-m Printer the IP info was found by pressing the Wireless Icon)
5. Type the IP address into the address bar of a web browser to see the printer's internal settings.
6. Click on the Network tab and look for the Wireless Setup Wizard and run it.
7. The Passphrase is the password you use on your wireless connection.
8. Now change the network name on your computer back to your wireless network.
The printer will now be connected to your network. With your the computer backyour wireless network network, you can re-add the printer from System Preferences.
Hope this works--- it did for me.
Jim -
i can'use firefox automatically,in my computer i have got write arima in my start autimatically.what's the meaning?since 22june i got message mozilla firefox 3.6.4:executable files may contain viruses or other malicious code that could harm your computer.use caution when opening this file.are you sure you want to launch firefox setup 3.6.4.exe?after i click yes,i got answer:file is corrupt?What is the meaning?what happened with mozilla add ons ie8,windows,yahoo toolbar?can you help me to choose match for my programm 2010 and install automatically with flashget the lastest?i got permission from licensi yahoo to use it for ie8 and google,for ie8 i never try it.thanks
== This happened ==
Not sure how often
== when i got programm 2010,install 3.6.4 from yahoo.tollbar2(YM9),i tried it last week.I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.
-
Do you know how to use Flash? can you help?
hi all,
Do you know how to use Flash?
I have been trying for months to find someone who can use
flash, who can help me, with no luck.
I need my links on my website updating, just a couple of them
need the text changing as i need
to change the name/title of some pages. I have tried to do it
myself (using a trial version of flash,
as i dont have flash). the site was made using dreamweaver.
the files are .FLA
and before anyone says 'get the person who made the site to
do it'....He wont, ive tried.
when i tried to change them myself i cocked them up and now
they dont work at all, see my
website and you will see; www.stevenallenphotography.co.uk
so, if you can use flash please can you help me? all i need
doing is the file updating with some
of the link titles/names changing, i.e. one link is
'exhibitions' which needs changing to 'published work',
please get in touch if you can help.
thanks,
steven.I used divx in my site once its really very nice! but i use it in different host not .mac...try this divx web player with video selector code --------<object id="ie_plugin" classid="clsid:67DABFBF-D0AB-41fa-9C46-CC0F21721616"
width="640" height="480"
codebase="http://go.divx.com/plugin/DivXBrowserPlugin.cab">
<embed id="np_plugin" type="video/divx"
width="640" height="480"
pluginspage="http://go.divx.com/plugin/download/">
</embed>
</object>
<script type="text/javascript">
// This code detects which browser we are
// running into (IE or others) and assigns
// the correct element (object or embed) to
// the "plugin" variable, that we will use.
var plugin;
if(navigator.userAgent.indexOf('MSIE') != -1)
plugin = document.getElementById('ie_plugin');
else
plugin = document.getElementById('np_plugin');
// This is a local JS function used by our form
// element to call the plugin functions using
// the "plugin" variable that we defined above
function openNewMovie()
var url = document.forms['videoSelector'].movie.value;
if(url != '')
plugin.Open(url);
</script><form name="videoSelector">
Choose a video to play:
<select name="movie" onChange="javascript:openNewMovie();">
<option value="" selected>Video Selector
<option value="http://www.yourdomain.com/folderdivx/name.divx">title1 divx
<option value="http://www.yourdomain.com/folderdivx/name.divx">title2 divx
</select>
</form> ---------------------
Hope this help! -
HT5569 I am having trouble connecting to wifi can you help.
I am having trouble connecting to wifi can you help.
connectng with a pin # will not work with the ipad. you need to find out exactly what the actual wifi password is.
pin and push buttons are used by wifi protected setup. which is an optional feture of WPA
here are some ideas
go to the routers home page (typically 192.168.1.1 or 192.168.1.254) and see if you can click on "show password"
get the manual out, it should have the default user name and password you may need to access the routers page
if your windows computer connects, then you should be able to right click the wifi connection and click on show password as well. this is somewhere in the properties page of the wifi connection
also with windows its a good idea to click on "save wifi connection to usb drive" this can be used to connect other windows computers and xbox game consoles as well
if your laptop computer is a mac book you can go to the keychain or icloud keycahin and reveal the actual passowrd as well.
look at the actual router it might have directions on a sticker on how to access the routers configuration pages
if you enter the wrong password on the ipad you need to forget the network and try again
Maybe you are looking for
-
YELLOW BANNER in Adobe Reader 9.3
When trying to use A. Reader with a PDF created in Premiere Pro CS4 the Yellow Security Banner cannot be accessed until after the Instruction Dialogue Box is OKed. Not being able to access the Yellow Banner first prevents any play buttons from appear
-
Jndi tree different in different servers in a cluster?
I bind a Properties object in jndi tree and it comes up fine in one node i.e. I can see it in the jndi tree on one Server. But I cannot see it in another Server in the cluster. Any idea why this behaviour? the code looks like this: Hashtable h = new
-
Disabling "Save" and "Email" icons for pdf docs.
I have an ebook that I have set to NOT allow copying, printing and whatnot, BUT the icons to Save and Email are still visible...how can I remove or grey out those icons so that the document cannot be saved or email THAT WAY?? Any ideas plz Thank you
-
Creative Cloud 2014 Upgrade Trial Activation
We converted 13 users to Creative Cloud last year. Since then the CC 2014 version has come out, and 12 out of the thirteen users have upgraded to the 2014 version. The last persons CC shows that the trial has expired for the 2014 upgrade, and a "Buy"
-
Computer completely freezes when trying to play video
When I double-click on the thumbnail of a video to play it, the computer completely freezes, and sometimes the display will get corrupted with noise. I tried exporting a video file to disk, then opening it with Quicktime instead of iPhoto, and the sa