MSI blutooth key and USB 2

Dear everybody
I have a p4 with the desktop board d850EMV2, each time i plugged my usb bluetooth key , the system freez and i get a message at the right corner : power surge !
or something like that: Power exceed the maximum ....
i can not use my usb key on usb2 port , i check the bios , the usb is enable .
please reply to me on my email address
[email protected]
Thanks for your Help

I have MSI 850E Max and happy about the board itself. Recently purcased a bluetooth device and wondering what does exactly means that this board support bluetooth ? Do I have to buy an USB/Bluetooth adapter or MSI migth have a bracket that will take bluetooth connection (I do see a jacket on MB).
I have purchase msi mb with 2 optional brackets (2 ports USB, 1 USB + machine stauts). Have I missed something ?

Similar Messages

MSI 865PE Neo2 and USB WD (MY BOOK) external HDD

Ok, so recently i went out an brought a My Book. I plugged it in and formatted it.. Next morning i came out turned of my PC and the computer hung during POST. after a few attempts at booting the PC up, i unplugged the MY BOOK from the USB port and rebooted, made myself a coffee and came back, sure enough the PC was sitting in windows.
So i did a bit of research and found that for some reason, when the PC is booting, it try's either reading from the MY BOOK during HDD detection and then at the end of the ON BOARD PATA/SATA HDD detection it 'Recycles' the USB ports, which crashes POST.
My main point of getting an EXTERNAL HDD is portability, so i can back my DATA up, but i also am going to use it as another drive on the computer.
So for my to be playing around, unplugging and plugging back in the Drive everytime the computer boots its sort of. well, not what i had in mind.
Im at a lost of how to fix it and that why i turn to you.

Hay ya Tzare, i've been playing for ages! still no luck!
the best i've got it i've put an inline switch to basically turn power off to the HDD. so i only turn it on when i need it.
i've tried a few little... crazy things. but with no luck! on involved a 1F 5.5V cap across the GND and 5VDC coming from the USB. oddly without GND connected it works!! but the cap keeps the HDD running forever! i read my multi-meter wrong, i thought it said .33A draw. it was actually 0.33mA, so really it wasnt even 1mA.... sigh!
i've tryed my luck with MSI and they say contact WD, and WD say contact MSI.
Im thinking the only real way to solve this is upgrade the motherboard. which also means upgrading the RAM and CPU and any AGP card. so really it will cos around... alot.
SO, problem still unresolved!..
Hay, you've got a switch on yours! that a bit better than me! LOL. (until recently)

MSI K8N Neo2 and USB 2.0

Does this MB have USB 2.0? When I plug in my iPod it says that the device could run faster if I plugged it into a USB 2.0 port. How do I fix this? Thanks
Chris

Gadgets,
Before you update your BIOS please do following:
1- Insure that you do not have older legacy USB peripherals (V 1.X) plugged in next to your Ipod 2.0 USB connection. Pluging in a USB 1.x connector next to a USB 2.0 connector can drag all transfers to the lowest USB 1.x transfer rate.
2- Do not guess at your USB transfwer rate. Download Sandra Lite 2005 (SR3) from Sisoftware here (it's free): http://downloads.guru3d.com/download.php?det=177
once you done so install it and use the File System Benchmark program to find out exactly what your Ipod USB connection is achieving in MB/s. A USB 2.0 connection should give you a 32 or greater MB/s transfer rate.
3- Don't MESS with your BIOS UNTIL YOU are absolutely sure of the procedures to follow. Here is some reference links:
https://forum-en.msi.com/index.php?topic=76897.0
https://forum-en.msi.com/index.php?topic=81017.0
https://forum-en.msi.com/index.php?topic=84865.msg606175#msg606175
If you decide to Flash your BIOS I recommend that you consider the one that I am using if you have an MSI K8N Neo2 (See my signature block):
https://forum-en.msi.com/index.php?topic=88244.msg633087#msg633087
Good luck,

MOVED: MSI K8N Neo2 and USB 2.0

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=93620.0

Gadgets,
Before you update your BIOS please do following:
1- Insure that you do not have older legacy USB peripherals (V 1.X) plugged in next to your Ipod 2.0 USB connection. Pluging in a USB 1.x connector next to a USB 2.0 connector can drag all transfers to the lowest USB 1.x transfer rate.
2- Do not guess at your USB transfwer rate. Download Sandra Lite 2005 (SR3) from Sisoftware here (it's free): http://downloads.guru3d.com/download.php?det=177
once you done so install it and use the File System Benchmark program to find out exactly what your Ipod USB connection is achieving in MB/s. A USB 2.0 connection should give you a 32 or greater MB/s transfer rate.
3- Don't MESS with your BIOS UNTIL YOU are absolutely sure of the procedures to follow. Here is some reference links:
https://forum-en.msi.com/index.php?topic=76897.0
https://forum-en.msi.com/index.php?topic=81017.0
https://forum-en.msi.com/index.php?topic=84865.msg606175#msg606175
If you decide to Flash your BIOS I recommend that you consider the one that I am using if you have an MSI K8N Neo2 (See my signature block):
https://forum-en.msi.com/index.php?topic=88244.msg633087#msg633087
Good luck,

MSI Eclipse SLI and USB ports

I have reinstalled Windows 7 fresh with formatting HD
Now whenever I plug a memory card (even on the motherboard ports) in any of the USB ports I get the message
"The USB device can perform faster if you connect it to a High Speed USB 2.0 port"
I reread the book, rechecked the connections, under device manager I have 8 Intel ICH10 Family USB enhanced host controller and underneath them i have another set of 8 root hubs -
The transfer speed is definetly USB1 (under 14mb/s) (in other pc core2duo e6400 - windows 7 the rate was almost 20mb/s)
Anyone has a clue - there are no drivers and I don't want to touch the bios before getting some advice
Thanks guys - you've been extremely helpful before

I have reinstalled Windows 7 fresh with formatting HD
Now whenever I plug a memory card (even on the motherboard ports) in any of the USB ports I get the message
"The USB device can perform faster if you connect it to a High Speed USB 2.0 port"
I reread the book, rechecked the connections, under device manager I have 8 Intel ICH10 Family USB enhanced host controller and underneath them i have another set of 8 root hubs -
The transfer speed is definetly USB1 (under 14mb/s) (in other pc core2duo e6400 - windows 7 the rate was almost 20mb/s)
Anyone has a clue - there are no drivers and I don't want to touch the bios before getting some advice
Thanks guys - you've been extremely helpful before

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Solution may be found if you search in the "More Like This" section over in the right column.

MSI motherboards and usb 2.0

Does anyone know why usb products don't recognise that the MSI motherboards usb 2.0 or vice versa.
I have several computers all with msi mbs but not one has usb 2.0 as when i put in a usb item a banner appears that says that it would work better in a usb 2.0 port, the box says they are all USB 1.1 and USB 2.0 compatible.
is there a patch to sort this out?
Thanks in advance

There's probably a setting in BIOS to enable or disable USB 2.0 support along with a similar option for legacy USB (1.1) support. Take a look at your particular setting.
Of course the other possibility is that 2.0 works on the back but doesn't work on the front. In that case I think it is almost always the wiring from the mobo USB connector to the front panel receptacles.

Registration and MSI Drivers for MSI STAR KEY 3

First of all for some strange reason i cannot register my star key 3 which i bought at 23/03/2010 from www.e-shop.gr, i have send to MSI the photo with the serial number.Second, clearly in the manual refers about a software driver CD which was not included in my package! I have searched the MSI site for an MSI driver and it has only for STAR KEY 1 and 2 ,not for STAR KEY 3! Currently i have the driver that Windows XP service pack 3 installed but as i saw from previous models STAR KEY 1 and 2 ,the MSI driver has more features.To anyone who has MSI STAR KEY 3, did MSI included a driver CD in the package?

Even though I can understand your frustration, you need to understand a few things in order to take the next steps in this matter:
First:
The BlueSoleil package is not an MSI Product but a piece of bundled third party software that comes with the package. It is kind of like buying a CD/DVD Burner and getting a CD that contains Nero Burning ROM and a valid license for the particular Nero Version on that CD. Now let's say: That this "older" Nero Version does not work very well with Windows 7 64bit (because it was concipated for older Windows Versions). Who do you blame for that? The manufacturer of the optical drive? When you contact the software company behind Nero about that, they will tell you exactly the same thing as BlueSoleil did: Buy a newer version! Now, please don't tell me, that will start complaining about the manufacturer of the optical drive about an outdated Nero Version.
Second:
Quote
I bought this device a couple of months ago, so its not even a very old one!
Just because you bought this device only recently in some shop, that does not mean that it is brand new (the shop could have had that thing in stock for a couple of years already).
In fact, the device is at least 3 years old (if not older) and is officially advertised as supporting the 32bit versions of Windows 2000, Windows XP and even Windows Vista. Windows 7 was not even on the market back then and therefore there was also no possibility of including a copy and a license for a Windows 7-ready Bluesoleil version. There is an old version of the bundled/third party BlueSoleil Software on there because the product was put out on the market more than three years ago. In case the people in that shop you bought the device in told you any different, they did not really provide very good advice.
Quote
the ability to contact the real MSI Support
... exists here: http://support.msi.com/
However, MSI will most probably be able to help you with getting your hands on a free up-to-date Bluesoleil version (just like the optical drive manufacturer who will not provide you with a free copy/license of the latest Nero Release).
Quote
I also tried to register the product but the registration page says: "not MSI product" BAHH!!! WHYY??
What page exactly? Do you have a link?
Quote
I have the serial number
Did you enter the serial number of the device or the serial number for the BlueSoleil Software Version that came with it?

[Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

Ok,let's go...
I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1. i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection. i have 2 screenshots to show you:
this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
the other one is from everest corporate edition:
both drivers marked with purple colour!
i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
thank you very much and i'll stay alert of your suggestions. by

MSI Btoes - BlueTooth PC2PC USB Dongle

Hi...
I have a problem with MSI BlueTooth USB Dongle.... When I install software my computer cant recognize my USB hardware. Cant find driver.....
Any help??!???!??!
I try 3 same peaces and all are the same....
TNH

After several hours trying to get BToes to work in Windows XP Pro, with problems similar to those described above, I seem to have finally succeeded in getting it to work. Hopefully the following guidelines may be useful to others. If you are not confident editing the registry, don't proceed any further!
1. Log in to Win XP as Administrator.
2. Install BToes software as per instructions.
3. Run REGEDT32.
4. Under HKEY_LOCAL_MACHINE\Software, right click on the Microstar key and choose "Permissions...". In the permissions dialog, look in the Group name or User name box for your normal account or the "Users" group, and then set Permissions to Full Control. Close the dialog.
5. Under HKEY_LOCAL_MACHINE\Software, right click on the Widcomm key and choose "Permissions...". In the permissions dialog, look in the Group name or User name box for your normal account or the "Users" group, and then set Permissions to Full Control. Close the dialog.
6. Under HKEY_CURRENT_USER\Software, right click on the Widcomm key and choose "Permissions...". In the permissions dialog, look in the Group name or User name box for your normal account or the "Users" group, and then set Permissions to Full Control. Close the dialog.
7. Right click again and choose Export. Save the key to a file, e.g. widcomm.reg, on C:\ (don't use default administrator folder, you'll not be able to access it later).
8. Close REGEDT32.
9. Restart PC.
10. Log in to Win XP using your usual account.
11. Run REGEDT32.
12. Under HKEY_CURRENT_USER\Software, right click on the Widcomm key and choose "Permissions...". In the permissions dialog, look in the Group name or User name box for the "Users" group, and then set Permissions to Full Control. Close the dialog.
13. From File menu choose Import to import c:\widcomm.reg (saved in 7).
14. Close REGEDT32.
15. BToes should now work.
N.B. when you log in to your usual account again, you may get an error saying something like it cannot load a profile and it has connected to the default. To fix this, go into the Bluetooth Advanced Configuration. Then under Local Services, find File Transfer in the list of services and click Properties button. In here, change the Exchange folder to one that your account can access (it default setting is to a folder in the Administrator account, to which you don't have access).

MSI Star Key on Windows 7

Hello!
I have a bluetooth usb device since 2005, back then I used to have windows xp and it worked very well, now I have win7 32 bits and I'm having troubles with the installation, driver is not supported.
The device is the MSI star key v 1.0. How can I get the right drivers??
Regards!

Topic split and renamed.
This is a very old device now, and MSI does not provide Windows 7 drivers.
Its possible that drivers are already included with Windows 7, have you tried letting Windows Update find drivers for you?
Alternatively you could give the Vista 32bit drivers a try, they may just work (Windows XP drivers won't):
http://eu.msi.com/product/net/STAR-KEY.html#/?div=Driver&os=Vista%2032

Installation of 27" cinema display with macbook pro silver key and bootcamp

For everyone out there who may be interested in using the new 27" cinema display with an older Macbook Pro Intel with silver keys and bootcamp.
What is needed:
1. Apple 27" cinema display.
2. Macbook pro Intel silver key model
3. Altona Dual Link DVI to Mini DisplayPort Converter (Model AT-DP400)
4. Bootcamp 3.1 drivers from Mac OSX Snow Leopard V10.6.3(retail)
Procedure:
1. Update your display software on the Mac OS side. Apple has posted an update on their software downloads page, "LED Cinema Display Software Update 1.0" After doing so, make sure that the 27" CinDisp is operating correctly and you can change the brightness from the system settings.
2. On the Windows side, install the bootcamp 3.1 drivers. These are on the Snow Leopard distribution CD. However, there is a bug in the .msi installer that causes the installation to go into an endless loop. This must be resolved during the installation of the drivers. The following article discribes how to do this:
http://discussions.apple.com/thread.jspa?threadID=2305631&tstart=0
3. After you have successfully installed the bootcamp 3.1 drivers, then install Apple's bootcamp update: "Apple Magic Trackpad and 27-inch LED Cinema Display Update for Windows 32 bit".
Good luck, it works!

I have the same MBP and recently bought a 23" cinema display on Craigslist for $140. It works great. I had a display port to DVI adapter and it worked fine. Built a stand to hold the laptop vertically so it's out of the way. Don't know about older displays but anything with DVI should work fine.
The screen size and resolution are great for photo editing. I now have the best of both worlds, a display that rivals my wife's iMac and portability.

MSI P67A-C43 (B3) USB not working but theres a twist! Help!

:lol_anim:I Have built a new rig with the MSI P67A-C43 (B3) Motherboard, 16GB DDR3 PC3-10600 1333MHz Memory (4GB x 4), Intel Core i5-2500K 3.3GHz 6M LGA1155 Processor, 550 Watt 80 PLUS Bronze Power Supply,24x DVDRW, 3.5" Internal Card Reader with 2 USB ports, 500GB 7200RPM 3.5" SATA Hard Drive(which i plan on upgrading just didnt want to waste money on the shitty HD they had.....
So down to the nitty gritty . My computer is running Windows 7 64 Bit, i have downloaded all of the updates and all of the Chip-set drivers, Bios, etc... i ran a system registry tool to clean up any errors in my registry and i have ALL of my drivers up to date.
I have my USB mouse and keyboard that connect fine and are recognized by my computer, sometimes they stop working and start back up within seconds but windows does display any type of error or disconnection "this may have been fixed due to the registry cleaner i used i haven't had any hiccups yet" so i have my USB mouse and USB keyboard working fine and dandy now i think. got a new headset and the windows finds the USB Headset and it works Perfectly fine. BUT and this is where my whole frustration comes out. Whenever i connect my I-Pod Touch, I-Pod Nano, My Cell phone to copy files to from my SD Card, or my External My Passport drive Windows says "USB Device was not recognized" notification and in the Device manager it shows the one device with a yellow exclamation point and says "Unknown Device" I have tried to uninstall the USB hubs and reinstalled them perfectly restarted windows, still non of the devices work. i have tried making sure that windows tries not to turn off the device to save power, when i say i have tried almost everything i mean everything that is related with USB Device not Recognized. So i do not know what to do now, i have contacted the Manufacturer and they don't know squat about it or what could be causing it. the only thing i can think of is there is some hardware maybe that is not compatible i do hear some beeps when i start up i will have to come back and update how many beeps" i saw another post that it means the motherboard is trying to tell me something maybe this could be the issue. but i have tried every single usb port and non of them Recognize the device but when i plus in my mouse and keyboard in diff ports they still work so i am a bit confused. my last step is to return the computer to the manufacturer for a replacement or repair w/e i do not want to do this cause this should be working. my friend has almost the exact same MB and equipment and his works fine so i am getting a little frustrated with the issue Someone Pls Help me out. And yes i have tried turning off the computer, unplugging it and pressing the power button, and waiting like 1 Hour etc and still nothing. Drivers are Up-to-Date and Mother board bios and chip-set drivers are Up-to-Date as well. I hope someone knows or has an answer to help me out!

Yes the Bios is Up-to-Date and they are not plugged into the Blue USB 3.0 ports(x2). oh and forgot to mention already did a clean install again of Windows 7 64bit and still nothing. Im also wondering if the power supply is enough?? maybe?

Bitlocker without TPM and USB

Hello Team,
I am working for a company which has Windows Server 2012 R2 domain server and mixture of Windows 7 and Windows 8 client computers.
The problem is, I need to configure bit-locker in all client machine, but some machine doesn't have TPM. I found a way to configure bit-locker without TPM, but it requires USB(key within it) at every startup.
So I want to configure Bit-locker in all client machine without TPM and USB, but with PIN. And all bit-locker recovery keys should be backed up to Active directory.
Please let me know the steps to configure this rather than HTTP links.
Thanks in Advance.
Have a great day ahead and make a great day for me.

Hi.
Having a PIN is only possible in combination with a TPM, but having a password alone is possible since windows 8.

Firefox 3.6.11 does not respond on mouse, only Tab key and space bar

HW: Lenovo R61i.
OS: MS Win-XP PRO, ver 20002, SP3
Internet Explorer is diabled in:
Contol Panal|add/remove programs|add/remove windows components
All other programs responds om USB mouse or the little joy-stick between G, H and B-keys.
Removed FF, booted and reinstalled FF 3.6.11.
Mouse works a couple of cliks - then Tab key and Space bar is the only tool.
By the way - living in Norway, means No version og FF :)

Getting very tired of this problem which is becoming much more frequent. I love the FF browser, but lately after I have been on line for a while, the browser stops responding to mouse clicks and I have to use the task manager to shut the program down and then reopen it to get it to work. From what I've been reading in the forums, this is not an uncommon problem. I've done all the recommended fixes and nothing works. Please fix this!!

MSI blutooth key and USB 2

Similar Messages

Maybe you are looking for