MSI Control Centre settings query

Hi all, the older versions had an option via the taskbar icon to automatically load current settings on reboot. The option is no longer available on my Windows 7 64-bit installation. Anyone any ideas why MSI would remove the option to have your settings applied automatically & make it so that to load a custom fan profile you have to manually load it on every boot up? 
Also are there any other alternatives for fan control (mine are controlled via voltage not PWM so speedfan doesn't do the job for me).
Anyone any ideas?   

Set the default behavior you wish the fans to exhibit using the uefi / bios or click bios II. Use control center for on the fly changes that are temporary.

Similar Messages

  • P67A-GD53 (B3) Board Control Centre Software

    Hello,
    I have the above motherboard and am using MSI control centre. The board has blue phase LEDs which light up automatically when booting up.
    Within MSI control Centre it is possible to turn these LEDs off. Unfortunately, putting the CPU in sleep mode resets the LEDs to on.
    Is it possible to turn the LEDs permamently off even when going into sleep mode.
    Thanks,
    Nevica

    I got a few complaints on this subject and my first thought was pirated mainboards.
    Not this case.
    See this topic: https://forum-en.msi.com/index.php?topic=152674.0

  • Control Centre - doesn't retain settings

    The version of Control Centre (2.5.060) on my mother board (P67a-c43,  bios v1.19, 20120801) doesn't retain settings.  In fact what would appear to be the "apply" button is showing as blank.
    Recently I reverted to an older version of the bios because of other problems.  I seem to remember that when I was using the very latest bios before I reverted to an older one at least the green power settings seemed to be working.
    I notice on other posts that this problem of not being able to "apply" settings or retaining settings seems to be a bug that has never been fixed.
    I wonder, is this still the case.  Is there any solution?

    Thanks for the suggestion.  My bios version shows "auto" and a also atarget cpu temperature.  When I tried it at a target of 60C and ran the cpu flat out the cpu temp was nearly 70c.  So, knowing that the actual is overshooting the target temp, one way forward is to set the target quite a bit lower than than the actual desired temp.
    I think this is simple if inelegant way of solving the problem and I'll probably adopt this mainly because it is so simple.
    But surely to have to do this because Control Centre doesn't work and because the alternative  bios method of temperature control is inaccurate does not do MSI any great credit.

  • Can I only Bluetooth sync iphone 5 threw the settings app and not control centre

    What is the point of Bluetooth in control centre as when I turn on Bluetooth in control centre it never sync with my car radio . I have to go into settings Bluetooth and then connect to radio as far as I can see it only good for turning off Bluetooth Please help

    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • MSI Control center windows 8.1 fan settings reset after reboot.

    I wanted to see if anyone has any information about this. I have a z77a-gd65 motherboard running windows 8.1 and I have saved profiles for cpu fan and sys1/sys2 fans. After reboot the fan curves get reset to factoy defaults.
    I didn't have this problem with windows 7 and am running the latest version of Control Center.
    Is there a fix for this?  Thanks in advance. 

    I actually did find a response from MSI in a random query.
    They said, 'CC is used for temporary changes, use the bios'.
    Which I can see the validity of that statement, but at the same time, what if you want to adjust things to a finer degree than the bios and want it applied after restart?
    I know you can save and load individual pages of the Command Center, but still..
    I do find it VERY irritating I can't set fan speeds lower than 50% for the System Fans. (or is there a way to do this?)

  • MSI P55A-G55 + i5 760 (problem with Control Centre)

    Hi guys,
    Anyone gotten the control centre to work?
    My does not detect any CPU info at all.

    Quote from: mortego on 04-October-10, 09:13:08
    Hi guys,
    Anyone gotten the control centre to work?
    My does not detect any CPU info at all.
    Not working for me as well.
    Mortego does option "Restore on AC power loss" works for you? Try to switch off your PSU on back on it and power it after 1-2 seconds. I`m really interested in if only I have this problem as support says or not. In my country my reseller refused to accept RMA because they told me that it`s bios bug and I should wait for updates. It`s frustrating that it restart my PC rather than shutdown it completely.

  • HT4437 Air play seems to have disappeard from "the control centre" since I've downloaded iOS7. Can't find it within settings . I have air drop but not air play. Running a 32g iPad mini

    Air play is not on my iPad mini anywhere (from what I can see. Scrolled up from the bottom of screen to access control centre. Have air drop but not air play. Air play logo not seen In music. Cannot play through my altec lansing 5000 speaker system like I used to be able to before the ios7 download

    Using AirPlay on iPad
    http://support.apple.com/kb/HT4437
    AirPlay Mirroring
    http://support.apple.com/kb/HT5209
    Trouble shooting AirPlay
    http://support.apple.com/kb/TS4215

  • Disappointed with iOS 7 control centre

    I like everyone else was expecting a lot out of iOS 7. Definitely apple lived up with half of my expectation by adding new designs, new icons etc etc. but one thing that really got me disheartened was the control centre. I mean its cool that they added some toggles and shortcuts, but theres so much more that could have been done. Data toggle, 3g toggle, location toggle, hotspot toggle they are essential for almost all of us. Its really tedious to go back to the entire settings procedure every time we need to turn them on or off. These options are already present in other platforms since ages. And apple omitted them despite of having the space and opportunity to add them. And another vital omission was the Facebook and Twitter quick post widget. It was a really helpful part of the iOS 6. & i feel it should have been placed in the control centre. So i hope apple reads my post and takes these things into consideration for future development of iOS.

    Apple is not here
    This is a user to user forum
    Try apple.com/feedback to send to Apple
    Allan

  • I cannot swipe up on my iPad to get to control centre.  I want to mirror to Apple TV.  this is the most frsutrating thing. No wonder Microsift rules

    I cannot swipe up on my iPad to get to control centre.  I want to mirror to Apple TV.  this is the most frsutrating thing. No wonder Microsift rules

    Is notification center showing up when you swipe down ?
    Check in your settings if control center is checked :
    Settings > control center > check both "lock screen" and "access within apps"
    gently swipe up beginning outside the screen, just a few inches up (you don't need to swipe up to the top of the screen.
    if detected the airplay option will appear in the control center.

  • Should i use Green Power mode in Msi control Center ???

    So all new to this control center on my board and was wondering should i use the green power mode in Msi Control center, it looks pretty cool but not sure if i should use it so anyone got any opinions ?.

    Quote from: Beavise on 02-February-15, 05:50:02
    If i do use the one in the bios what setting should i use ? i'm new to this stuff the boards i had always just did it by itself.
    What settings exactly? I have different board, as I said I don't have a disable option, only adjust the settings for target and fan speed in Hardware Monitor which is graphic.
    looks like this:
    http://www.hardwareheaven.com/reviewimages/msi-z87-g45-gigabyte-z87-d3hp/msi-bios6.jpg

  • Accessing control centre.

    Updated to iOs7. Finding my way around it. Now for some odd reason I cannot use 5fingers to close apps or access control centre in apps or even on home screen.......help!

    Thanks for responding. I must have played around with settings and gestures weren't working. Reset settings and fixed it. Quite like closing apps down 2 or 3 at a time.........

  • Hi i currently cannot swipe up to get to the control centre on my iphone 4. So am unable to swith the do not disturb off therefore are unable to use my phone

    Hi i currently cannot swipe up to get to the control centre on my iphone 4. So am unable to swith the do not disturb off therefore are unable to use my phone

    Do not disturb is also accesible in settings, so you may be able to temporarily avoid the issue by allowing calls from everyone and having it only silent while locked, or perhaps secheduling might work. Other than that, restarting your device may be an option.
    Is there any reason you know of that might be making you unable to access control center?

  • HT202769 Apps cannot be launched from the control centre when the phone is locked?

    I'm using an iPhone 6, running iOs 8.3.
    There is an issue when I try to launch any apps from the Control Centre while my phone is still locked.
    For example, if I launch the camera from the Control Centre while the iPhone is locked,
    the camera will launch, but within the next second, the screen will black out.
    So for me to use any apps from the Control Centre, I have to first unlock the phone, then launch the app.
    Has anyone faced this same problem and have a solution to it?

    Reset device: press both home and lock buttons for at least 10 seconds, releasing when the Apple logo appears (no data loss).
    Reset settings:  Settings > General > Reset > Reset All Settings
    Restore: Use iTunes to restore your iOS device to factory settings

  • Can't open control centre

    I have a Griffin survivor cover on my iPhone 4S and have just installed iOS 7. I can't open the control centre because of the case covering the edge of the screen. It seems strange because I can open the camera from the locked screen which is the same action as to open the control centre. It's quite frustrating to find that you can't use one of the best new functions of iOS 7. Does anyone know if there is any other way to open control centre?
    Thanks in advance.  

    How about adding the Control Center as a feature on the AssistiveTouch icon in the Accessibility part of the settings?? This icon is designed to assist if you are having difficulty touching the screen, which seems to be the problem all of us (including myself) are having. Otherwise preloading some multitouch gestures would be the super clean and professional way about solving it. You guys should really have loaded iOS 7 with multitouch gestures for moving backwards and forwards within apps like Safari, Messages, and others like them. E.g., two-finger swipe across for back or forward while browsing, two-finger swipe up or down for Notification or Control Center. Heck, use three-finger swipes if if interferes with the zooming or something else. Just saying you guys really need to step up your multitouch gesture game. iPads and MacBook Touchpads have had them for years!!!!

  • Control centre won't work! Please help!!

    Hey guys, I need help I have a problem where my control centre won't come up on the home screen or apps only on the lock screen. Please help!! Also my device is a iphone 5s n and it is iOS 8.1

    Hey there iThings,
    Since the Control Center is not opening anywhere but on the Lock Screen, I would start by toggling the option to Access on Lock Screen off first:
    Use Control Center on your iPhone, iPad, and iPod touch - Apple Support
    Settings > Control Center.
    Then quit all the running apps on the device:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the phone and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

Maybe you are looking for

  • BAPO_PO_CREATE1 giving errors while creating PO by uploading a file?

    Hi,   when i am creating Purchase Order using BAPO_PO_CREATE1 by uploading a File, it is giving below errors 1-> No instance of object type PurchaseOrder has been created. External reference: 2-> PO header data still faulty 3-> No master record exist

  • I cant log into youtube or ebay paypal

    Everytime I try and sign into YouTube or to pay through ebay on Paypal, the page tries to load and then it says: Problem loading page The connection to www.google.com was interrupted while the page was loading. # The site could be temporarily unavail

  • IOS 7 Deleted My Apps

    I just downloaded iOS 7 and it deleted my apps. I went to the App Store to download them again but it says that it is already downloaded. How do I get it back to my home screen? Please help!!!!

  • Multiple tax code in po

    Dear Experts, My user created a Po with two line items with different tax codes,user has done MIGO with same delivery note,how can i make make MIRO,which tax code i need to give in header data of MIRO,please suggest me.can we use multiple tax codes i

  • SUBMIT WITH JOB

    Hi All, There is a requrement in which i have to pass an internal  table from main program to another program .then do processing on that table i.e modify the value of some fileds and then pass the changed table to main program. I have to use job i.e