MSI ControlCenter software problems

Just installed new board (P55-GD55). Works OK but software does not. It crashes each time I query it. Can control fan speed (barely) but display wipes out most of the window - screen res is 1920 x 1080. Want to test other settings. Any ideas on getting this software to function.
MBoard    MSI P55/GD55
BIOS    AMI V1.0
CPU   Intel i7 930
Memory   Kingston   4 x 2MB
Vcard   ATI Radeon 4670
OS     Windows XP

Quote from: andrewrmw on 27-April-10, 07:32:31
MBoard    MSI P55/GD55
BIOS    AMI V1.0
CPU   Intel i7 930
Memory   Kingston   4 x 2MB
Vcard   ATI Radeon 4670
OS     Windows XP
Dual-channel EDO DRAM?
Anyway, 8GB on XP? Hopefully is x64...

Similar Messages

MSI DVD Software Problem

I just purchased a new computer which came with a G4MX440 video card. One of the reasons we picked with card was the DVD player, MSI DVD, and other software that came with it.
The card seems to works very well, but the MSI DVD program, fails right after starting to read the DVD, it appears that the first few frames of the DVD come up and then it crashes.
The computer is running Windows XP Home edition, freshly installed and the latest drivers for the video card for Windows Update.
I have searched far and wide for a new version of the MSI DVD software and cannot find it anywhere.
Can anyone from MSI, or otherwise knowing person, let me know were I can get a version of MSI DVD that works with Windows XP?
By the way, just to try out the hardware and setup, I downloaded trial versions of other DVD players and they work fine. But why buy another player is one came with the video card?
I am assumming the MSI DVD comes with the DVD Decoder software included, right?
Thanks for anyone who can help me out. :O
...Peter

Have you tried Live Update? I experienced the same problem but after trying various methods of my own, I took it to the place we got it from and they fixed it for free.
nForcer420D

MSI PVS Software Install problem

Hi,
I'm having a problem installing the MSI PVS software...When I start 'SETUP' the Intervideo PVS screen starts, all activity stops for about 4 seconds, and then an error message appears: 'Setup can't continue, RPC call failed / RPC can't start' (rough translation, original message is in Dutch).
Anyone seen this before ?
Other software installs without a problem, no viruses (Norton Antivirus Latest edition and updates), no Blaster worm related RPC thingy. Blaster removal tool couldn't find anything...
Radio part and soft works fine, WinDVR3 demo version installs without a problem...and TV part is functional. No remote functionality though.
Any suggestions to get the original soft working ?
System: Win XP Pro SP1
AMD Athlon 2000+
CSE K7S6A motherboard, no overclocking
512 Mb DDR
40 Gig IBM HD
Hercules Radeon 8500LE 64 Mb
2x LAN Network card
TV@nywhere MSI
Nokia 17'' monitor
Sound Blaster Live

my suggestion is ... Dont bother
just use Girder and the msiremote plugin for the remote (I do and it works great )
for capture I use VirtualVCR - freeware and full sourcecode available

SoundBlaster X-FI MB3 software problem

Hello MSI Forums,
New purchaser of the Z87-GD65 motherboard. Has anyone else purchased this board and installed the XFI MB3 software from the included driver CD? I installed the software and it states that "There is no supported audio device available". For anyone that says I do not have a SB card installed, my understanding is that this is not a driver, but software to enhance basic onboard audio on a motherboard.
Quote from Creative: The Sound Blaster X-Fi MB3 software suite is a powerful audio platform equipped with cutting-edge audio technology, offering premium audio quality, effects and features for ordinary PC systems equipped with only basic onboard audio.
No where does the Creative site say it is a external soundcard required software. It is part of the software package included with the MB, and is for sale by Creative. I would expect that this software is included with the MPower boards as well.
I cannot get 5.1 audio from the optical S/PDIF Out, and figured this software might be the fix. I only get 2.1 audio. I have an older Gig board with optical out, and the Realtek drivers that i used for that board had theater 5.1 options. The MSI Realtek driver under the digital output only gives you the option for CD or DVD with no speaker options, like the Speaker setting does.
I have run through all of the sound settings in Device Manager and can only select 2 channel audio on the Advanced tab for Realtek Digital Output. Not understanding if it is a MSI Realtek interface problem, or the drivers. Tempted to install the old R257 or R267 drivers. Currently running R271. The old drivers allowed me to install the Dolby HD drivers from Realtek (DCC Win764 2.2.3 Dolby). If i try to install the Dolby HD drivers for this board I get an error.
Sent an email to MSI Tech Support:
Dear Customer, the board does not have a sound blaster audio controller; it has a Realtek audio controller. It does come with the sound blaster Cinema an audio effect program. the board will do 5.1 from the analog audio jacks only. You can get 5.1 from the audio optical output for video playback if you use a program like power DVD and the audio track is originally recorded in 5.1.
I am using MPC-HC X64 software to watch movies on a Blu-Ray projector and have always had 5.1 audio using the optical out. So this software supports it, not sure why Tech Support thinks that the software will make the difference, when I cant even select 5.1 under the Digital Audio device output in Device Manager. The included Cinema software only appears to alter the OFC audio jacks. I am wondering if the problem is the Realtek driver for the ALC1150, or MSI's version of it. Nothing has changed from my previous MB setup other than the board and the drivers.
Running Windows 7 X64 as I was on the other MB.
Any suggestions, or anyone using the software successfully?

Quote from: dmsanjaya on 04-August-13, 04:49:38
sorry froggy that's what i said. i had the problem. cinema sounbd one is another problem. X-FI MB 3 is intended for Xpower board only as far as i know. check your self, check the overview of both boards and you will see only in xpower it says about the x-fi mb 3, so i guess the CD has the software of all the Z87 mobos, i think it's not specific as the rest of the devices are mostly common as well.
GD65
http://www.msi.com/product/mb/Z87-GD65-GAMING.html#overview
Xpower
http://game.msi.com/product/motherboard/z87-xpower
P.S. My cinema sound problem is a seperate problem. m facing many problems with this mobo. i can't even install widi drivers
Already did read it at the MSI Website several replies earlier.

MSI PVS Installation Problems

Hi. Yesterday I put together all the parts of my MEGA 865. All parts appear to be working fine and most of the software was installed without any problems. The only problem I'm having is with getting the MSI PVS software to install. When I try to install it a loading screen for the program does appear but then nothing after that. After a few minutes of waiting for something to happen I closed the setup program using task manager, when I did this I got the message:
Setup failed to run installation:
The remote procedure call failed
Sorry if a solution to this has already been posted, I did look but couldnt see anything.
Thanks

your windows xp has been installed to drive F:
there is another thread which details this topic and how to temporarily disable the card reader elsewhere
install windows xp to drive c: and msipvs will install perfectly

Kernel panic but software problem

Kernel panic (the "You have to restart your computer" message at startup) is said to come from hardware problems but this seems to be a software problem - maybe somebody can help me!
It started slowly with the fans coming on more often than ususally. Then, I had some kernel panics at startup, usually after two or three false stars, the system would load. Hardware Test said everything was OK, Disc Utility corrected a few permission errors, but the problem persisted. I tried everything: Disconnecting everything, removing PCI card, you name it, nothing helped.
Only thing that did help was start over. "Archive and install" was not good enough, I had to start from zero. Which means that all my iTunes library and all the rest waas lost. Made a disc image on an external HD and went for it.
After that, I upgraded to 10.4.11 and tried the migration assistant. Left some of the programs out from the old installation, but took my Documents folder with me. Imported my iTunes library and iPhoto pictures. Until then, everything was perfect. After that point, the fan started its strange behavior again, and today guess what: You have to restart your c.!
So it must have to do with the programs and data that I imported, and not hardware. Have no idea though - anyone run into similar problems?
Apart from standard apps, the only thing I use is Cubase but I haven´t touched it for a long time.

Hi, thanks for your reply! I am now trying to rebuild everything using 10.4.7 ... seems the driver for the audio card (m-audio) was at least causing problems. I´ll see if it was the only one. I did the system updates whenever they popped up in software update but there wasn´t even a driver available for 10.4.11.
If that´s not it, I´ll try to use your tips! Thank you!

HT4060 My first generation Ipad won't allow me to charge it by the mains socket. This was a replacement as my origional Ipad had a software problem. I have rebooted it a number of times but still not charging. Any advice?

My Ipad 3G has decided not to charge. I have been using the same charger that came with it which worked perfectly until a few days ago. I have even tried to charge it using my incar charger, but it still won't charge up. This Ipad is a replacement as my first one had software problems, so I am hoping this can get fixed and not result in another replacement.
I will be grateful for any advice.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

MacBook Pro 13" Early 2011 Backlight Keyboard Not Working?! Software Problem...

So my "MacBook Pro 13" Early 2011" backlight keyboard hasn't been working. I have tried LabTick today, doesn't fix anything. Even in high or low lighting situations (dispite the Adjust keyboard brightness in low light being off) doesn't like to go on. It doesn't give me a circle with a cross like it does with that box checked in day light. It shows on the screen the
16 dots fully light after hitting F6 fully, just it doesn't light up. I one time had to reset my Mac OS at the Apple Store, it fixed the problem, but when I restored with a time machine backup, it went back to this software problem. How can I fix this?! What is wrong with my OS? Mountain Lion? How can I fix this?!

If it does not detect the display automatically, try going to system preferences>displays, click detect displays.

My macbook pro 15 mid2010, crash every time in the last month. What can i do? Is a hardware or software problem?

The problem is that my mac is working very well, in soft programs, like browser or text editing, and then stop. Stop for one eternity, until i do a hard shut down.
After this situation apper´s many times, in a single day, i went to a apple service store and left my mac to repair. At first, the tecnhical manager told me that happens a lot, and the problem are in the logic board. Well, when i pick up the mac, he told me that was a software problem and was solved with the instalation of 10.8.5, but in that same day, he crash 3 or 4 times, in different way´s. Now, he crash´s and restart alone, and at the first try don´t restart appearing one message on the grey screen.
I don´t know what is this problem.
Someone have or had this problem too?
What is the solution?
Thanks a lot...

Maybe find a local who can translate for you. I don't know what to tell you for dealing in another country for service on your computer.
I can offer you something you can do if you want to give it a try. You'll need a backup of your data in your Home folder because you need to erase the drive. You'll also need a solid, preferably fast, internet connection.
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

My Ipod touch screen will not come up unless I conect it to the computer. It never gets past the apple logo and never fully retores? My screen is crackd a little at the bottom. Is this a screen or software problem?

My ipod touch 4will not respond unless I hook it up to the computer. It never goes pasthe logo apple screen.It never restores fully. Cant tell if this is a screen or software problem.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 if a 64 GB one and $99 for the other 4G iPods. They do not fix yours.
Apple - iPod Repair price

MBP 2011 GPU failure or software problem?

Hello there,
since Januari 1, 2015 my Macbook Pro 15" (purchased in 2011) is having major problems! How things started:
I was just watching a movie on Netflix, pauzed it, went to the toilet and when I came back my MBP had a black screen. I could hear the fans working (when I pressed my head against the keyboard) but it did not respond to anything. All I could do was a hard reboot.
After reboot I got the Apple logo, but the screen looked not as smooth as before. When I looked closer I saw very thin, horizontal lines (color pink/brown?) across the entire screen. These lines were not perfect. They had a small break in the middle. After the Apple screen I got different results:
- White/Grey or maybe very pale blue-ish screen -> Does nothing behind this
-----> This is also the most frequent result of a boot
- Normal blue screen -> Checkered screen -> Back to the blue screen to end with a Kernel Panic screen
Since a few days I can "normally" boot again but it crashes after a while. I don't know what the trigger is. It may be coincidence but it always crashed when I tried to go on the internet or used an application wich used the airport (also used a cable). Maybe important to mention is that this "normal" boot happens after the "checkered" screen mentioned above.
-----> The "crash" in this normal boot happens like this:
- Total freeze of the MBP
- Crashes on a black screen (like I had before)
- Crashes on a dark blue/purple(?) screen -> This is also the most frequent crash after a "normal" boot and happens faster and faster.
Safe boot: Sometimes a normal screen but most of the time a screen with pink, very low resolution bands (vertical) across the screen.
When I tried searching for solutions on the internet I immediately came across this:
http://www.mbp2011.com/
The screens show exactly what I'm experiencing. The culprit in this case: GPU failure.
BUT, isn't it strange I don't have any glitching (apart from the boot in safe mode, the Apple Logo and the checkered screen) or distortion on my screen, that it sometimes has a clear screen, like nothing is wrong? Unlike many of the people with the GPU failure, I CAN boot the MBP with a normal screen, only it isn't very stable and it is only occasionally.
Things I've done so far:
1. Reinstall OS X (10.6.7) from the original installation disc.
2. I have tried NVRAM and PRAM (cmd+option+P+R), no change.
3. Verbose-mode (cmd+V). (the last thing I could see was something about the Airport) I did this 2 times. First time it crashed on a black screen after the Verbose-mode. Second time it got stuck on the grey screen.
4. Single-user Mode (cmd+S). Everything looked fine, no errors on hard disk.
5. Start in Safe Mode. (Shift). The bar doesn't load until the end but it boots in safe mode, but with the pink bars on the screen
6. Re-apply of thermal paste on GPU
The programmer at our work has over 30 years of experience with Apple and has never seen something like this. He also doesn't understand why it would be a hardware failure, because the glitches are "symmetrical", it can boot "normally" and he can't find anything wrong with it. He is now looking for something in the software wich may cause the MBP to crash. Could it just be a software problem? As I said before: It could be a coincidence but the crashes (after a "normal" boot) always appeared after trying to connect to the internet, using the internet or using an application that uses the internet (like the App Store -> I was trying to download Yosemite, it crashed around 70% of the download). And in Verbose mode the last line said something about the Airport and then it crashed.
My MBP is a Macbook Pro 15" (bought in July 2011), 2 GHz Intel Core i7, 4 GB 1333 MHz DD3
AMD Radeon HD 6490M, Part nr. MC721FN/A.
I am running Snow Leopard OS X 10.6.8
I spent the last two weeks on the internet to understand that if it is indeed the GPU that is failing, the replacement of the entire Logic Board is necessary, wich is VERY expensive... This cost would be more or less ok for me, but I read about failing after replacement, a LOT. Why would I pay so much money for a repair that only lasts just over 90 days? That is ridiculous!
Sorry for spelling/grammar mistakes, English isn't my first language and really thank you in advance. This MBP is impossible to replace (no money...) so I hope someone can help me.
Ask away if I did not provide any information that is necessary for troubleshooting.

Anyone?

Windows xp pro stalls - blank screen- hardware or software problem?

Hi Guys,
My system is about one month old and has been awesome in performance and graphics.
Suddenly it (windows xp pro) stalls after flashing the windows loading screen and it goes blank. Looks like a software problem?
I am posting on this forum because when I check cmos, no hard drives are registered.
I can't get into safe mode, can't get past the administrator/user screen because no mouse operates here and can't select icons with the keyboard.(No admin passwords were set up anyway)
Booting from CD, repair console doesn't work because it can't find any hard drive.
Reluctant to do a complete reinstall because of precious stuff on the hard drive.
Using f8, "last known good..." just gives the same blank screen.
Using floppy boot, no other drives are recognized.
If my root directory has been wiped out by a virus or something, how come it gets past post and starts to load windows? If it's merely the graphics driver or similar not loading, how come the cmos shows no hard drive?
Is this a hardware or software problem? Any help much appreciated.

THE ANSWER !!
Hi Guys,
I finally got to talk to the guy who set up this system and he said that it is normal for RAID drives not to show on BIOS/CMOS. 'Think of it like a vrtual drive' he said. When the black and white initialization screen shows something like: 'Nividia Stripe-healthy'...then THAT is the hard-drive.
He said that as long as Windows was getting to the loading screen, that means that the computer itself was functioning okay, so don't worry about BIOS, the problem is a file corruption in windows, or virus etc.
Also he said that when trying to use recovery console or reinstall windows, because the system can only read the RAID drives through a SCSI interface, you have to load the Nvidia SCSI drivers from floppy by pressing f6 when asked to at the bottom of the pale blue screen (from Windows cd boot), before trying to do anything with windows (or windows will just tell you it can't read the drives, as it did before with me.)
So in the end, I reinstalled windows by that method and everyting seems fine so far. YAY!
Thanks you people for being kind enough to help someone out. I really appreciate it.

Need Help...Do I have The mother of all itunes software problems???

I am in desperate need of help. I have fried three new ipod touches in two days. I Purchased a new 32GB 2d Gen ipod touch on Mon. 11/24. Worked okay till Friday 11/28. When I tried to sync with new additions, a warning came up “the ipod could not be updated, an unknown error occurred (9)” That was followed by a windows vista windows warning “USB device not recognized”
When I disconnected the touch I found that it could not be started. Tried a forced restore pressing the sleep switch and the home button together. That did not work.
Brought the touch to my apple store genius bar on Saturday and they too couldn’t get it to work. They switched out the ipod with a new one. Brought the new one home connected it and it received the new ipod touch software download okay. But when it tried to sync the same problem repeated…the two pop up warnings as before and a second dead ipod!
I then synced my ipod classic with no problems, so it appears the itunes software is okay. I’ve scheduled another appointment with the local apple store genius bar again.
When I took the new fried touch back to the Apple genius bar, it was switched out again. It was activated (by the initial step ipod touch software download on their computer.
I brought my laptop with me so we could test the syncing. The syncing proceeded initially for several minutes, and then the dreaded pop up warnings appeared
“the ipod could not be updated, an unknown error occurred (9)” That was followed by a windows vista warning “USB device not recognized”
The new replacement ipod touch was also fried.
The tech gave me yet another new ipod touch. He had never encountered such a problem and advised me delete and reinstall itunes and call the APL CARE 800 support number and go over the problem with one of their techs who have a broad range of experience in dealing with possible PC related issues.
As my other ipod has no problem syncing from the same laptop (Dell Inspiron 1520 using Vista) I am wondering if the problem might be a corrupted Itunes software problem that affects only the touch and not the ipod classics.
Has anyone heard of a bad itunes software related problem? I googled this and could find no info. Thanks for your help!

If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
You will have to have all computers authorised with the relevant Apple ID's
Store > Authorise this computer...
This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
If both Computers use the same apple id this step is not required.

When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance

When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

How to get and install the new MSI Bluetooth Software Package 1.4.3.3.

How to get and install the new MSI Bluetooth Software Package 1.4.3.3.
This little FAQ will only cover the new version of MSI Bluetooth Software Package.
First thing too do is unistall any older version of the MSI Bluetooth Software.
Do this through the Add/Remove program applet in your control panel.
There seams too be only through Live update you could get the new version of MSI Bluetooth Software Package.
If you can't see any enter for MSI Bluetooth Software in the Live driver section of Live update then you have too enter the following too your registry.
Create following code in Notepad and save it as MSILD.reg, then run the file.
;-->Code start
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\MSI\Drivers\MSI Bluetooth Software]
"DrvSetup"="1"
"Version"="1.4.2.10"
;-->Code end
Rerun the Live update and hopefully you will now see a entry for MSI Bluetooth Software in Live driver section.
Install the new version of MSI Bluetooth Software and reboot your computer. Even if the setup program doesnt told you too doit.
After rebooting the computer you will see the Bluetooth icon in the taskbar. If it's Red then try too start the Bluetooth services by right click on the try icon and the only alternetiv there is.
If the Bluetooth services is asking for a valid licens.dat then you should do the following.
Surf to Jon's Bluetooth guide http://www.jonsguides.com./bluetooth/prepare.html and download the patcher from the link there.
Unzip the the patcher and then run the BTWPatcher.exe program.
Now the Bluetooth services will start and you will bee able too configure your own settings for the Bluetooth services.
If nothing of this work you could try the complete Bluetooth solution at Jon's gudie and install the IBM version of the same program. I havent test this solution and will not do soo.

I have the MS-6968 device and i want to use driver 1.4.x or 3.0.x. I found the driver 1.4.2.10 but i cannot find any WIDCOMMSecurity code.
So, can anyone give me a link for BTWPatcher.exe???
It cannot be found here (Jon's Bluetooth ) anymore.
Thanks

MSI ControlCenter software problems

Similar Messages

Maybe you are looking for