MSI Core Center not loading

Anyone have this problem that the Core Center does not load at the start of Windows.?
Running 365PE-Neo2-P MS-6728
Latest bios
PC Apps:
WinXP SP2
CA-Antivirus eTrust ezAntivirus from Computer Associates (an MS partner)
MSI Live Monitor
STEAM
WinAmp
Those are the ones, that appear in the tray.
Then after the desktop gets loaded, the following appears in 3 different messages, and then the system reboots.
I can stop this by removing the Core Center software from the system.
1st pop-up window from CoreCenter
Failed to load Hardware Monitor Driver !
2nd pop-up window from Error
The serviice has not been started.
(after acknowledging this window, it loads MSI Live Monitor)
3rd pop-up window from CoreCenter
No Hardware Monitor!
Then it reboots

Had a similar problem after removing one version of core center and installeing a new version. The uninstaller sets the computer to remove some of core centers components after restart so if you install the new version before the restart it removes part of the new installation after restart.
Try uninstalling core center, restarting, reinstalling core center, restarting.
If you get the error message after restart end the core center process in task manager, uninstall core center, restart, reinstall, restart.
If this don't work and you have windows set to auto log on with no users screen disable this and when you boot wait on the users screen for a minute before logging on.

Similar Messages

MSI Core Center problem!!!

I´ve just updated the MSI Core Center to ver 1.6.2.0 because 1.6.1.0 kept increasing and decreasing CPU fan speed all the time, got a bit annoying.
After the install and restart of PC, when Core Center started, the PC automaticly restarted. Only way I can use my PC now is by dissabling Core Center, or going to older ver. but thats not the best solution.
I have passiv coling on NB, but this havent caused problems before, and keeps a normal temp.
MSI, i think u should look tthe Core Center program over, somethings wrong.
Pardon my english (I´m from Sweden).
//Khinax

hi khinax,
Please give your signature (computer spec).
Why you adjust the fan speed doesn't it run automatically with 3 pin?
Use CC with not much problem.
I use it for DOT with ver.1.6.1.0 which quit better than 1.6.2.0, this is the only software that can communicate with the COreCell.
Work fine right now.
Casing Tt Xaser III Skull
M/B 865 PE Neo-2 PFS Platinum Edition Bios Ver.3.6
CPU:P4 2.4C (HT enable) and ThermalTake SubZero 4G
(DOT Rank=Commander,Turbo,2395 mHz - 2760 mHz)
Memory: Corsair XMS 3500 2x512 meg (dual-channel dimm 2 and 4)
VGA:ELSA Gladiac 925 Ti4600
HD:2 SATA Maxtor 80gig and 1 ATA Maxtor 80Gig
CD/RW Yamaha and Pioneer DVD
PSU:ThermalTake Silent PurePower 480W (W0010/Black)
+5 V/40 A, +3.3 V/30 A, +12 V/18 A, -5 V/0.3 A, -12 V/0.8 A, +5 VSB/2 A Peak Load 550 W
Window XP PRO SP1
NEC FP2141SB
Microsoft DesktopPro
Sound Blaster Audigy 2 Platinum + Klipsch Promedia 4.1

K8t neo fis2r - core center not functional after installing sound card

Hi. I had been using Core Center with Dynamic Overclocking enabled and all was well. When idle, my amd64 3000+ (2.0ghz), was running at 800mhz. Under load it would go up to 2100mhz. But yesterday, I installed an Auzentech x-plosion sound card and after i installed the driver, the dynamic overclocking stopped working, my cpu is running at max all the time. (The variable fan speed function still works).
I checked the IRQ and there is no conflict, I uninstalled the amd64 driver and core center and reinstalled. Still does not work. I uninstalled the auzentech driver, rebooted, and cancelled new hardware wizard. Then the variable cpu frequency feature worked. Once I install the driver for the auzentech, dynamic oc stops working. I was thinking to try another pci slot but it appears to be a software issue rather than a hardware issue. The new version of Core Center does not work with my board even though msi says it's compatible so I'm still using the one that always worked. The amd driver is the latest and also always worked.
Has anyone else had a similar problem, perhaps using the auzentech sound card with this board and Core Center? Or does anyone have any suggestions?
Thanks!
K8T Neo FIS2R
AMD64 3200
AMI bios version 2.2
1.5Gb pc3200 memory
nvidia quadro FX 1100 128mb AGP
Antec 430W ps

Hey guys, I just went to AMDs site to get the dashboard utility mentioned and in the readme, it stated that in XP, the power option needs to be set to portable/laptop. But in the past, I read that it needed to be set to "always on" and that it is, in fact, what I had it set to before when cool n quiet was working. Now I change it to "portable/laptop" and it works and set to "always on" doesn't work anymore. So now Core Center reports I'm at 33c @800mhz at no load. I don't get it??? I'll have to try an alternate utility just to verify that is indeed working.
btw, QV, I checked system properties, (right-click my computer > properties, or "system" in control panel) and on the "general" tab, it indicates an AMD64 3000+, 2.0GHz. But I'm pretty certain the clock frequency is dropping now as reported by core center because of the decrease in the cpu temp at idle. Am I looking in the right place in XP? I have XP pro, SP2
Again, thanks for the input and Happy New Year

MSI Core Center Gone Crazy!

Hello.
I'm using an MSI K8N Neo2 Platinum board with an AMD X2 4400+ CPU. (2.2GHz = 200MHz x 11)
I'm not doing any overclocking.
Core Center worked fine until I installed AMD's Processor Drivers.
I wanted to try Cool'n'Quiet, but benchmarking revealed that the system's performance degraded with it enabled... So I disabled Cool'n'Quiet, and then I notices something weird in Core Center: for some reason the clock speed alternates constantly between 200MHz to 74-45MHz to 327MHz!
This is really bizzare, and even frightening... Could I have damaged something in the CPU?
I tried to uninstall the AMD driver, but the clock speed in Core Center still fluctuates!
Then I installed it again - it didn't help.
Cool'n'Quiet is disabled in BIOS, the Power Scheme is "Always On" and as I said no overclocking is being done.
PS: in CPU-Z the clock speed is stable at 200.9MHz x 11.
Can anyone explain this to me? It's really frightening, I'm afraid that the CPU will burn or something...
Please help...
Thanks in advance!

I've uninstalled Core Center. It's just too buggy. But other programs do weird stuff as well; SpeedFan, for example, makes my CPU fan very noisy, and I don't want to control the speed by hand - the motherboard does fine job controlling it automatically.
About Vcore, I'm just asking if 1.30 is the right value, because I've read somewhere in this forum that it's supposed to be 1.40 for 90nm AMD CPUs.
I don't want to overclock; my system is fast enough as it is...
I havn't changed anything the the Core section of te BIOS.
My BIOS version is 1.9, and I've chosen 50 degrees as "Smart CPU Fan Temperatue". choosing 40 degrees makes the fan noisy as a tractor...
Right now the CPU temperature is always about 48 degrees C, and under load it's 50 or even 51 degrees.
Do you get 31 degrees when idle with your 4400+ processor?
What kind of cooling are you using? I'm using the fan that came with the processor... Perhaps switching to a Zalman fan will solve this problem?
Or is my BIOS just reporting wrong temperatures?
PS: SpeedFan reports my Northbridge temperatue as 45 degrees C... Is this too high as well?
Thanks!

Dual Core Center - not worth bothering with?

Hi,
New to this forum so please bear with me!
Just installed a K9N Neo V3 and upgraded to latest BIOS.
Have installed latest version of Dual Core Center software and when I select the the Silent option withing a few seconds the window pops up and it starts playing a Siren sound like something is wrong. It reports the CPU FAN RPM as quite low - but then I have a Artic Cooling Freezer Pro 64 CPU cooler which controls the speed based on temp.
I cant find any instructions on how to use / configure Dual Core Center. How do you adjust warning levels?
Can you adjust the System Fan Speeds based on Temperature?
I tried uninstalling Dual Core Center and installing the latest version of SpeedFan 4.33 but that wont show any FANs at all on the main screen or config screen.
Are there any other software worth trying?
Thanks In Advance

Quote from: harry66 on 05-January-08, 19:29:02
The two SYS FANS that I have installed.
Anyways I seem to have solved the problem - the two fans came with Molex adaptors etc so I just swapped the 12v & 5v connectors round and connected them to the PSU rather than the MB connectors.
Now the PC is ultra queit and still has two fans sucking warm air out - albeit only running at around 900RPM
OK... I'D Like to Understand, If those fans came with Molex Adaptors, How did you Connect them to the Mainboard in first Place?
Now this is How I modded 2 X 12mm FANS that were Molex and came along with my Case.
Chopped off a 3 Pin cable from Old Cpu Cooler That was not being used, Insert the 3 Pin Cable into one of the Fans Molex Adapter as an extension. Because the molex connectors on these fans are Usable via Male/Female, simply connect The 2nd Fan to the 1st one and hooked it up to My Fan Controller, now I have the Ability to control 2 fans on 1 Knob, and I Do Wick them both up to keep My System cool under Load. The Fan Controller is the reason I needed them on a 3 Pin, could easily use both fans on One 5V ZM-MC1 connector just the same.

Game center not loading my profile

Game center app on the ipad just says loading and spins never loads my profile and now some of my other games do not load.

Hello Lea1979,
It sounds like your Game Center app is not loading correctly. I would start by logging out of Game Center in the settings:
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
closing the running apps on your phone:
From: iPhone User Guide
http://help.apple.com/iphone/7/#/iph6c493cac
Then close all the running apps on the phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and try loading the Game Center again. You will be prompted to sign back in:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
All the best,
Sterling

Need older MSI core center!!!

Hi, iv got an older ms-6561 Card. Iv ealier used the Core center with great result, but the latest version did not support my card. Coud somone please get me a link\send me some older versions I coud try out?

Try here Softpedia

MSI Core Center Problem with the software

Hello all
Just wanted to let you know about a problem i had the other night. You will see my specs below but i recently installed core center and all was running well until 2 nights ago when the pc would start up into windows load up core center and then re-boot. The problem was core center it's self when windows was starting it up for some reason core center decided to overclock my pc i only realised this when i saw a brief glimpse of the CPU speed as core center started it was over 2.6 GHZ no wonder the machine shutdown i eventually got it to boot up and get into core center where i found that this time it was trying to run my machine at a FSB of 215 i reset this back to 200 and the re-booting stopped i decided to just un-install core center to save any further problem.
Have any of you guys had this problem and how many are having a similiar problem but don't realise it thinking it is the cpu or heat related just thought i would let you know about this in case anyone does have a similiar problem
Cheers everyone

i didn't even install it to tweak or overclock i was only using it to monitor my temps etc. seeing as it came on the installation disk did look at the overclocking features of it but after looking at them i returned to the default settings prefering if and when i try overclocking to do it through the bios. I was surprised as anyone that core center decided it was going to overclock my system on it's own, Maybe it's become self aware LOL
I just put this thread up in case anyone else has it installed and has similiar problems as i did so they can check to see if this is their problem thought it might be helpful as i know lots of people do have problems and find there way here looking for help

MSI DKA790GX PLATINIUM msi core center bsod on startup win7 x64

i installed core center on win7 x64, i get bsod rushtop64.sys on startup.

Did you see this in the link? Also it's dual-core-center.
Quote
• If you are using an ATI graphic card, you must install ver. 8.41 driver and its additional applications to make Dual CoreCenter works normally. It is better to use recommended installation while installing an ATI VGA driver.
But that brings me to my next question, why would you install and use that app anyway?
Hardly anybody does.

MSI Core Center v2.0.2.1 released

Release date 22.11.2006,and download link.
http://us2.msi.com.tw/support/swr_exe/mbd_swr/CoreCenter_MB.zip
I don't know if there are any improvements from the last version,but if we don't try will never know .Here you go for the released notes and changes since last version.
New Version: 2.0.2.1   Build Date: 2006.11.07
      a. modify ICH7 SMBus address reading under XP64
      b. add "HaveEIST" parameter to check BIOS has implemented "EIST" item
      c. modify LoadNTRushTop() to load 32/64 drivers to replace InstallShield method
      d. support MS-7236 v2.3(BIOS v332) + Conroe FSB266 CPU
      e. new mainboard :
         MS-7267 v3.1,v3.2 (Chipset: Intel 945GM4+ICH7, ClockGen: ICS 954129BGLF,Linear over clock,watch-dog(MS7))
         MS-7236 v2.4 (Chipset: Intel 945PL+ICH7, ClockGen: ICS 954519BGLF,Linear over clock,watch-dog(MS7))
   New Version: 2.0.2.0   Build Date: 2006.10.05
      a. fix MS-7125 v3.A DMI detection from 3.0A to 3.A (BIOS v7.1)
      b. support Intel Conroe CPU serial
         - E6300 (FSB266,EIST,CPUID=0x6F6h)
         - E6700 (FSB266,EIST,CPUID=0x6F5h)
      c. fix Intel Conroe CPU Ratio error issue under EIST mode
      d. support Intel EIST for MS-7235 v1.1 (W7235IMS.169)
      e. check EIST register by cmos
   New Version: 2.0.1.9   Build Date: 2006.09.20
      a. avoid MS-7236 v2.2 overclock failed issue
      b. fix MS-7236 v2.2 read SMBus failed under 64bit XP
Cheers!

Looks like it shouldn't impact many of the existing channel boards...

Re: MSI Command Center Not Working

Its a no go.I installed 1.0.0.95 and it does the same thing.On my other windows 7 partition where I have 10097 everything works fine.It used to work before on the one I am having proablems with,thing is it just stopped working all of a sudden and just ...

Tried to answer your post on Polish MSI forum but seems like while I was typing my internet went off
Try to put BIOS file (to be downloaded from product site on msi.com, make sure to download exactly same BIOS you had before it failed with upda...

Believe Core Center or BIOS voltage?

I have a K8N Neo2 Platinum board (bios 1.1). Does anyone know if I should trust the 12 volt reading from the BIOS hardware monitor or the MSI core center utility.
I have a brand new power supply (Enermax EG465P-VE FCA).
I am getting the following readings for the 12 volts:
BIOS READING
11.97 -12.03 volts
CORE CENTER READING
11.61-11.91 volts
I have been experiencing some stuttering with my new eVGA graphics card and the tech support thought I the power supply might be the issue since it is sensitive to the 12 Volt rail. They were not sure which voltage reading is correct. Unfortunately, I do not have a volt meter to probe inside. Could it be that once windows loads up, it activates more devices causing a voltage drop of some sort?
Any help is appreciated.

The BIOS readings are almost certainly more accurate.
How many amps does your PSU have on 12V? If 24+, then it's unlikely to be that - your voltages look well within spec.
Graphic stuttering can also be caused by several other things, including drivers, AGP fast writes to name a couple.
A slight voltage drop is normal with more devices, but a good PSU should regulate itself to keep within spec.
Edit: Just checked, and your PSU is 20A on 12V, which is "borderline OK", depending on who you ask
I'd try investigating other possibilities before you blame the PSU though.

Core Center alternative?

I'm getting tired of the error message "Failed to load hardware monitor driver!" in Core Center 1.6.1.0. I find that I have to manually load the program, and even then, I sometimes get the same error.
Does anyone know of a good alternative to Core Center 1.6.1.0? Ideally, I'd like a program that would dynamically display FSB and Multiplier because I use Cool & Quiet and I find such information interesting. Also, the program would display the temperatures, voltages, fan speed, etc. Thanks!

Quote
Originally posted by Cozman
that error message is i believe a conflict between the MSI software and the Creative Audiolgy software .. the way i found in the past to prevent it was to use ....
start .. run .. msconfig .. on the startup tab look for SBDrvDet ( i think or SBDetDrv ) and disable it ..
Ok I disabled the application, and it seems to work- thanks. Core center now loads without the error message.
I am curious though... what exactly did I disable? I'd hate to be without 5.1 channels when I'm playing Battlefield
Audigy 1 doesn't work with K8T Neo, and it seems Audigy2 software causes problems.... Does MSI have some kind of grudge against Creative?

New Core Center Ver. 1.6.6.0 Out

MSI Core Center ReleaseDate: 2004-6-1
Version 1.6.6.0
Under,downloads for motherboard-utility

OK guys.
Seeing you are in and out of live update.
On this machine it recognises the 1.71 bios, and if I click on Live Bios Update the dialog box says there are 3 changes from previous version
"1. This is AMI BIOS release.
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
3. 2004/05/06"
If any of you are still on 1.6, is this differant, as I did not pick up on the change with single and double sided mem. Which may help with certain Ram Sticks, and Snoppy to keep using win2K.
jocko

Core Center Freezes Machine

Seems that MSI Core Center windows application does not like underclocking...
When i overclock with this tool everything is okay...
however, when i try to revert to previous setting using the tool, Machine freezes
Well i guess software programming is not the strong point of MSI
Markoul

Welcome to the club I like most pps played with corecentre when rig was 1st built. Since then alll oc done through bios. Only have core centre instakked to allow access tio corecell chip to reset fan settings if needed. Have removed it from starting with xp/
luck

MSI Core Center not loading

Similar Messages

Maybe you are looking for