MSI Core Center Problem with the software
Hello all
Just wanted to let you know about a problem i had the other night. You will see my specs below but i recently installed core center and all was running well until 2 nights ago when the pc would start up into windows load up core center and then re-boot. The problem was core center it's self when windows was starting it up for some reason core center decided to overclock my pc i only realised this when i saw a brief glimpse of the CPU speed as core center started it was over 2.6 GHZ no wonder the machine shutdown i eventually got it to boot up and get into core center where i found that this time it was trying to run my machine at a FSB of 215 i reset this back to 200 and the re-booting stopped i decided to just un-install core center to save any further problem.
Have any of you guys had this problem and how many are having a similiar problem but don't realise it thinking it is the cpu or heat related just thought i would let you know about this in case anyone does have a similiar problem
Cheers everyone
i didn't even install it to tweak or overclock i was only using it to monitor my temps etc. seeing as it came on the installation disk did look at the overclocking features of it but after looking at them i returned to the default settings prefering if and when i try overclocking to do it through the bios. I was surprised as anyone that core center decided it was going to overclock my system on it's own, Maybe it's become self aware LOL
I just put this thread up in case anyone else has it installed and has similiar problems as i did so they can check to see if this is their problem thought it might be helpful as i know lots of people do have problems and find there way here looking for help
Similar Messages
-
I bought a Iphone 4S in Colombia two months ago, It never worked properly, I cant put turn it on. When I went to Movistar they told me that it was a problem with the software. Now, they have the Iphone for repair at Movistar. The questios is, If I bought a NEW Iphone why they gave me a Iphone with this problem. I asked about the warranty but they told me that Apple doesn't respond. Please tell me something. The IMEI is: 013071008363505 is a Iphone 4S 16GB. Black.
I would guess the fan is the cause of the noise. Suggest you take a look at it.
This site has a wealth of information about getting inside a Macbook or Macbook Pro.
http://www.powerbookmedic.com/mac-repair.php -
HELLO, I HAVE THE SNOW LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, (EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ...) THANK YOU!
Have a look here:
http://applehelpwriter.com/2011/07/24/will-my-old-apps-work-with-lion/
(Like any website owner, I may (or may not) derive compensation from my website) -
I´ve just updated the MSI Core Center to ver 1.6.2.0 because 1.6.1.0 kept increasing and decreasing CPU fan speed all the time, got a bit annoying.
After the install and restart of PC, when Core Center started, the PC automaticly restarted. Only way I can use my PC now is by dissabling Core Center, or going to older ver. but thats not the best solution.
I have passiv coling on NB, but this havent caused problems before, and keeps a normal temp.
MSI, i think u should look tthe Core Center program over, somethings wrong.
Pardon my english (I´m from Sweden).
//Khinaxhi khinax,
Please give your signature (computer spec).
Why you adjust the fan speed doesn't it run automatically with 3 pin?
Use CC with not much problem.
I use it for DOT with ver.1.6.1.0 which quit better than 1.6.2.0, this is the only software that can communicate with the COreCell.
Work fine right now.
Casing Tt Xaser III Skull
M/B 865 PE Neo-2 PFS Platinum Edition Bios Ver.3.6
CPU:P4 2.4C (HT enable) and ThermalTake SubZero 4G
(DOT Rank=Commander,Turbo,2395 mHz - 2760 mHz)
Memory: Corsair XMS 3500 2x512 meg (dual-channel dimm 2 and 4)
VGA:ELSA Gladiac 925 Ti4600
HD:2 SATA Maxtor 80gig and 1 ATA Maxtor 80Gig
CD/RW Yamaha and Pioneer DVD
PSU:ThermalTake Silent PurePower 480W (W0010/Black)
+5 V/40 A, +3.3 V/30 A, +12 V/18 A, -5 V/0.3 A, -12 V/0.8 A, +5 VSB/2 A Peak Load 550 W
Window XP PRO SP1
NEC FP2141SB
Microsoft DesktopPro
Sound Blaster Audigy 2 Platinum + Klipsch Promedia 4.1 -
Problems with the software update and windows vi
Hello,
I have been looking all over this forum and couldn't find an answer to my question, so I decided to post it myself.
Recently I bought a laptop with windows vista installed on it, and my creative zen vision M 30gb software stopped working. After ignoring this problem for a month, I thought creative might have already came up with a solution. I downloaded this new software package; Creative ZENcast Organizer .04.06 Suite. When I tried to install the software, I received an error, stating that my windows media player wasn't up to date. After double checking my windows media player updates, I concluded that my windows media player was up to date. Still I can't install this new software. Looks like creative is living up to its BAD reputation over and over again. Any help?
kindest regards,
Carlos Vangilbergen.Out of boredom I decided to try to use the usb cable that i use for my digital camera instead of the bundled one?The Vision M burst into life!?
-
Is anybody have the same problem as mentioned above?
First the formatting tags should be "[ ]" not "< >".
I was told you should avoid calling a method from itself is this true?Recursion is a valid programming technique and in fact makes many algorithms much easier to code.
so I don't know if what worked for me will work on a lower end machineIt may be a little slower but it will still work. Recursion only causes a problem with resources when you have many levels of recursion. On my system I have:
C:\WINDOWS\TEMP\Temporary Internet Files\Content.IE5\
In this case there is only 4 levels of recursion. This is not going to cause a problem. You would generally only have problems if your recusion routine is not working correctly and you get in an infinite loop which will lead to resource problems and an abend.
In your particular case you aren't even using many resources at all since all you are doing is printing the file name.
This [url http://forum.java.sun.com/thread.jsp?forum=57&thread=435487&start=3&range=1]post shows a recursive routine that list all files for a directory and displays them in a table. In this cause you might have a problem with resources depending on the number of files in the directory. But the resource problem is because of the memory to hold the filenames in the table, not because a recursive routine was used to get the filename. -
I have an I7 processor, 6 GB of RAM and a GTX 460 GPU.
As you see it is not a hardware problem.
It happens quite often on several websites.
I do not use a lot of plugins or addons. Actually, I use none. The only ones I have are the ones the browser requires to display content such as Adobe software, etc.As a temporary get around, dare I say it? I'm using Google Chrome which doesn't have this glitch in it. Been doing so for a couple of days now and no problems at all. I've gone back to Firefox a few times and the two or three second freeze every 10 or 15 seconds resumes, so I'll maybe check Firefox in a few months and see if there is any improvement. Or maybe, I'll be so used to Chrome by then I won't bother.
Hope this suggestion helps. -
HT5429 Problem with the software
How can i get back my iphone 4s to ios5 I have already upgraded it but iphone5 and ios6 are not known in our markets yet. thank you
can somebody help me pleeeaasee )))
-
My problem with the phone is this
ontop of all the typical problems with the software i am having the following issue.everytime i go to update to ed04 it will download the whole way then fail to install.so eventhough the new 05 is out and supposedly fixes everything i can't even update to that.
they seriously should have just given the option over the phone to swap for the charge since my stores in the area were out of them for over a week now.i went in everyday after work and even called other area stores and had no luck.i'm seriously ready to just cancel my service and move on to another provider.i need my phone since i have a side job i do out of my hosue that is just beginning to take off and missing calls is not helping me exapnd.adamamazing wrote:
ontop of all the typical problems with the software i am having the following issue.everytime i go to update to ed04 it will download the whole way then fail to install.so eventhough the new 05 is out and supposedly fixes everything i can't even update to that.
they seriously should have just given the option over the phone to swap for the charge since my stores in the area were out of them for over a week now.i went in everyday after work and even called other area stores and had no luck.i'm seriously ready to just cancel my service and move on to another provider.i need my phone since i have a side job i do out of my hosue that is just beginning to take off and missing calls is not helping me exapnd.
Try a factory reset, it is a pain, I know, I've done it a couple of times, what do you have to lose at this time. Just backup your contacts and remove your SD card, even though it is not necessary, I still do just for the heck of it. -
Problem with Asha311 software update
Sir, I am having a problem with the software update of this unit. Updated it thrice but always get an error message saying "maybe problem with the internal". Hope there's a solution for this. Thank you.
When do you get the error message?
Nokia C7 -
I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once -
I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister
From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod. -
I face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion
If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
(61713) -
"There was a problem downloading the software fot the iphone. The network connection timed out."
there's no pblm with my connection but this error keeps on showing,
what to do? please help....Stop with the silly and pointless fonts.
A simple search of the forums for the actual error would have revealed the resolution.
Temporarily disable all security software on the computer.
Maybe you are looking for
-
Is it possible to Load External SWF files into Flex Mobile projects?
Hi Guys, I'm trying to load an external asset in this cse (a SWF file) into my flex project (Apple IOS IPAD), don't get any luck. Can any one suggest a solution ?
-
Flash content will not load in IE7
My company standard is IE7 I'm charged with developing flv that will auto play on PC from a removable thumb drive. in addition it should be able to launch a url. I'm using CS4 Flash and Dreamweaver developing on a Mac. I've used action script 3 to pr
-
Control to monitor serial bus traffic
Just started getting my hands dirty with an eval of Veristand. My tinkering is going well, but I have noticed a potential problem for when I start developing my own stuff for my program. Hopefully, some one can point me in the right direction. If I
-
Reliability 255/255, txload 1/255, rxload 1/255
I can't seem to find the meaning of the following parameters when the sh int command is performed: reliability 255/255, txload 1/255, rxload 1/255.. Can someone please shed the light on it? Thanks.
-
I will set my iPod view options (for the main library) to what I want, as in "Title, Artist, Time, Ratings, Date Added", and every time I reconnect my iPod to my Mac, the view settings go back to the default, most of which I have no desire for! How c