MSI CR/RW 8348 problems

hi.
I have got this burner for a few months and i been burning some time now with out any problems.
But today the problem started, i bought some new TDK 48x discs and when i want to burn no matter if its an mp3/data/or video file the Nero program just hangs when i either press the Burn button or when i select my Speed to burn then it says no cd is in.
And now the strange part, my old 4x TDK discs works i dont understand this.
I've been using over the months Verbatim,Mmore,Fuji etc..
I tryied to check the cables and reinstall both driver and the burner but i get the same error.
ALso it can read my normal cd:s so i dont understand why the 48x TDK does not work.
Any suggestions ?
I run Win2000. Pro SP3.

nero 6 takes care of this issue too.
are you using the wizard or the tool bar? the tool bar sets things better. You didn't say whether you were trying to copy a disk or compile a new one so I can't give you better on nero . The second bit of information I (or others) might need is some discription of how the disks are configured. is the cd on a master position with its own control? Which manufacturer of media? TDK, Memorex , imation, sony?
Did you test the drive in nero to see what speed it will write at? nero 5.1 needs to test each time or it gets locked up and sometimes stalls the system. What IRQ is the drive at?
The nero help for 5.1 is a bit sparse but I found the help desk was VERY helpfull. I phoned them and they knew what was wrong very quickly. gave me a few work arounds and things worked fine. it sounds like the problem might be in the way nero registered in the registry.

Similar Messages

MOVED: MSI KT880 Delta-FSR - problem with multiplier

This topic has been moved to Overclockers & Modding Corner.
MSI KT880 Delta-FSR - problem with multiplier

http://www.rme-audio.com/english/techinfo/nforce2_tweaks_02.htm
wiretrick it so multipliers under 12.5 will work
assuming the cpu is an old unlocked one

MOVED: [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

First post, whoo hooo
So what version of BIOS are u running? I recently installed the two newest versions 2.0 and 2.1, and they both give me problems. With the latest (2.1) I'm getting the same error as you. Returning back to previous BIOS fixed my problems. Oh yeah, my RAM is Kingston Hyper-X, so i don't think thats your problem.
Let me know if you fix it, thats why im here, .

Power of the Press - MSI Neo4 SLI Bios Problem

For those interested, I just sent this to hardocp because they did the review on the MSI SLI Platinum. Since MSI headlines this review on their website, maybe hardocp can do something about this bios problem. Enjoy and please send more emails to hardocp so we can get this problem addressed! Believe me, Ive seen this works with washington politicians, I know it can work if we all do it.
I appreciate companies like yours doing extensive reviews about products. However, your review caused me and a whole bunch of others to purchase this board with enormous problems associated with it (check out the msi forums). The problem is that this board works only for 130nm chips in which you tested on. On the newer amd 90nm chips, this board is the worst performing sli board out in the marketplace (for both winni and venice core chips). You need to do something to stop people from buying this board because its just awful and the folks from MSI are silent on the subject.
It's gotten so bad that people have gone out and purchased other sli boards, transferred all of the equipment out of it and into the new one and guess what...voila, no problems. Anyway, some of those in the other user forums had the same problem but those other manufacturers quickly fixed the problem. Its just getting worse and worse. I feel like both msi (and I am MAD) and reviewers like you (unless you don't know about the problem) are silent on this and its cost me hard earned MONEY ($175 for the mobo) and hours and hours of time...
You have a LOT OF POWER with MSI and I can see it because they headline your review on their website (power of the press). For Gods sake, please do something before others make the same mistake or if you can get MSI to allocate resources to fix the problem...you would be HEROs! Thank you.

Quote from: Husker_Faithful on 19-May-05, 11:56:11
Ok, I guess I am confused some, where is the issue with the new cores? I have no issues running the San Diego core and the my memory at the listed and published speeds.....
Quote
Also is your MOBO the SLI type? I run the SLI Neo4 with a San Diego core without any issues. In fact I dropped it in and booted using the San Diego as a direct replacement for a older (if 6 months is old!!) 3500. I have OC'ed with Corecetner as far as I can push it and runs awesome!
Quote
GUys, I am not sure exactly what issues you are experiencing as there can be MANY factors! But my SLI Neo is running awesome! It overclocks (no Tiresmoke, i won't go into that in this forum ) and has NEVER once BSOD, or rebooted or even crashed! Not once and I push the crap out of this as it is my gaming box. Also TS you are SO correct on the clock settings on the ultras, you gotts make sure they are the same or it will cause issues. The only thing I am kinda bummed about is the lack of real performance with the dual 6800 Ultra's, but that is a Nvidia issue not MSI. Guys I may be blessed, but I have run three Neo MSI brds, 2 939 and 1 754 and never had any issues....
Quote
I have yet to experience any boot/reboot issues...So I think we should wait to hear more from this person before we assume anything...
Quote
I have the nForce4 SLI brd and i run a new San Diego..it booted up fine and zero problems. But man is this thing FAST
Quote
According to MSI, the Neo4 will work fine with the new cores, the Neo2 will need a bios upgrade
Quote
I set my brd up the first time for SLI with dual cards and have never had any issues..Sorry guys, but I guess it's the luck of the draw, but I have yet to ever ave an issue with any MSI brds..I have a Neo2,Neo4 and the older 754 slot Neo..no issues.
7 of your last 11 posts. Why man? Why?
This is from MSI at the "listed and published speeds"
Dear Customer,
Since the mb has not been certified to support the Venice and San Diego Core processors, please wait until beginning of June, 2005 for the release bios support for the mb.
Sincerely,
Technical Support Division
MSI Computer Corp.
As for overclocking have you read these?
https://forum-en.msi.com/index.php?topic=75897.0
https://forum-en.msi.com/index.php?topic=79534.0
https://forum-en.msi.com/index.php?topic=79827.0
Look, I have already been threatened to be banned because of my sarcastic replies to you. Read every one of your responses I listed. Obviously OTHERS are having problems. WHY don't you help them instead of TAUNTING people that yours works. They are upset, and you make them feel dumb like it's their fault.
Man I have tried to contribute so much to this issue that at least 20 different members here are having, I have tested with an Asus SLI board, I have tried different BIOS's and posted results, I have theorized with others and I feel like you are slapping me in the face by restating time and time again "what problem mine works great"i
I'm on a verbal warning because I didn't have respect for you. Well how are you respecting the other people who have problems by saying you don't know what their issue is. Read up on it or help them, instead of creating tension. Please?

MSI 651 Combo / MS6769 Problem with Temperature

Hi. I´m having some troubles with my mb, since 2 weeks ago. Suddenly, it starts to appear that cpu temperature go 70 º C (158 º F), and i hadn´t do anything. I changed the cooler, and put some new grease, and nothing happen. Then i searched in this forum, and i found a message simmilar, that said something about upgrade bios, and thas what i recently do (WS6769 v1.0 originally, then V1.3, then V1.2). But nothing...
What should i do? buy another mb? I don´t want to.
Thanks.
Claudio

Well, i´m pretty sure that it is the mother board, because, i already changed all what´s possible to change: processor, RAM, hd, power supply, processor.
Din: I don´t know what´s "corecenter". I already upgraded BIOS (to v1.2 that supuestly fix my problem), and put thermal paste (grease? in spanish "pasta disipadora") between CPU cooler and CPU. And i do change the processor (i put a p4 1,8GHz), with other FAN processor (CPU cooler), and the same temperature.
Danny:Those details you ask me:
In a label on the power supply (lVoltage MAXAmpere): +5V 30A, +3.3V 20A, +12V 15A, -12V 0.8A, -5V 0.5A, +5Vsb 2.5A.
It is a Maxpower 300 Watts ATX, model PX300.
On BIOS PC Health: Sys Temp: 18ºC/66ºF, CPU Temp 66ºC/150ºF (up to 70ºC), CPU Fan speed 2909 RPM, Vcore 1.68V, 3.3V 3.26V, +5V 5.10V, +12V 12.03V, -12V -12.19V, VBAT(V) 3.26V, 5Vsb(V) 5.14V.
I have a Celeron 1,8 GHz, socket 478, a MSI 651 Combo MS6769 Motheboard, with nothing else. Hd Maxtor 30Gb, Rewriter MSI 52x24x52.
The problem: From one day to another, it wasn´t load XP. It resets itself after a few seconds (about 5 secs). On the BIOS PC Health section, i actived the CPU Temperature beep on "too much degrees" (i don´t remember the exact name, but that´s the idea). And that´s how i realize that the temperature is the problem. I think it is how the motherboard inform the temperature, and it is a nominal temperature, not real. If it´s real, i already had a burnt processor.
Anything else that can help to find a solution for me?
Very thanks.
Claudio

MS-8348 problems

I just got a MS-8348 and it is incorrectly seeing the
speed the disks should be able to write on.
Princo disks that are 2x-48x, and the MS-8348
says that they are 16x Max.
Imation disks that are 12x and the MS-8348
says that they are 16x Max
Old Sony 6x disks and the MS-8348
says that they are 16x Max
Nero reports Firmware Revision: A.QZ
My 24x Aopen burner reports that it can burn the
Princo at 24x and the Imation at 12x
The only media that the MS-8348 recognizes as other
than 16x is the disk that came with the burner.

MS-8348B
This is not related to hardware in my computer,
or the OS.
This is a problem with the drive recognizing the media.
Searching through your site I have seen firmware upgrades for other burners that seem to be primarily to
recognize more types of media.
When will MSI be putting up a firmware upgrade.
Simply allowing the drive to burn at 16x to any
unrecognized media is not acceptable, when the
drive is unable to recognize most types of media.

Msi kt3 ultra, msi gf4 4200 tvout problem

I have a msi gf4 4200 64mb card and i have a msi kt3 ultra aru and windows xp,
my problem is tv out is garbled in pal , ntsc is grey (iam in europe), the colours seem inverted blues are red, etc and theres a ghosting effect around moving images like in videos or around the cursor
Ive tried everything from default mem setting , to high performance , tried diferent driver sets , tried windows 2000, tried via chipset drivers, latest msi, nvidia gf drivers, pal b , g , i , 60hz, diferent resolutions, clone view, single output to tv, stretch view , nothing seems to fix it, the only thing that comes close to fixing it is using the tvtool http://tvtool.info/ with color fix correction activated, but the images isnt stable its got a weird strecthing, shimmering effect on the bottom half of the tv image
Iam sure that the problem is not tv or cable related because i tried a friends p4 (board msi sis 645dx) with the exact same model gf4 4200 (not my one) with my scart cable and tv set up and it worked fine.
Could it be a voltage problem? ive even tried upping agp and core voltage a bit to see if helps, and nothing

mhuizing,
nope havent tried a diferent tv , but it should work , i tested the connection with a friends computer
exact same gfx card model and it worked fine!
My old system leadtek gf3 ti200 , epox 8kha+ worked fine with this connection.
Iam using a scart cable to a video , then from the vid to the tv via antena cable
i upgraded and voila, i got some headaches for free :P !!!

Msi k7n2 delta ilsr problem

hi i have this configuration on my pc:
antec true control 550 watts
msi k7n2 delta ilsr
kingston hyper x pc3700 2x512 mb
athlon xp 3200+
seagate 120 gb sata 7200.7 hd
ati radeon 9800 pro excalibur ice q
i have 2 problems : the first one is that sometimes windows display me a blue screen with certain problem related to ati2dg.dll i think that problem is beacause the video card so i decided to update the bios , in the live update page from msi says that the bios 7.6 fix a bug with ati vga cards but after flashing and updating to bios v7.6 that blue screen with the same error still appearing so i dont know what else to do to solve the problem and the second one is that when i start any game or make the processor to work a little mostly related with video stuff the case speaker start to beep and the pc lags until he restarts with no reason i really dont know why if u can help me thank you

Foxtrotccs,
In the BIOS try setting the AGP to 4X and disable Sidebanding. Then set the AGP Apeture to 256. See if that helps.
Make sure you are running the lastest nVidia nForce Drivers and the latest ATI Catalyst Drivers
Take Care,
Richard
P.S. There is still a possibility that the Kingston RAM is the problem.

Msi KT3 MoBo / MSI geForce4 TI 4200 Problem

Hello, hopefully someone can help me. I am having a rather unusual problem. Least I think it is. I have a MSI kt3 ultra2 motherboard, 512 meg ddr 2100 crucial ram. AMD XP 2000+ CPU and an MSI Geforce4 TI4200 video card. First of all, what agp settings should i use? 4x? 2x?. Secondly, should i enable agp fast writes? And last, what are the other 2 settings in the agp setup in the bios which are like 1/2 or 2/3?
I also ran mad onions 3d mark 2001 SE and got a score of 4898! This seems a little low to me. Comparing online, I should be getting scores rannging from 9000 to 13000. I have installed Nvidia Detonator drivers but they are the latest beta drivers. Are these bad drivers? None of my games ever freeze except for Soldier of Fortune 2. It slows way down and when i ctrl+alt+del, it says i am using 100% cpu usage. Can anyone help me? I just want my system i bought a week ago to run at its full potential and have nowhere else to turn.

I am using Windows XP Pro. I am running the 3d Mark 2001 SE with a 1024 resolution and no AA. I am also using a 32bpp color depth. The defaults when you load the program up for the first time basically. I never did get a patch for SOF II although I should have. Man do I fell like such a n00b.
Hey Jamie B, you said i should "disable support for advanced cpu controls is NOT checked". Where is that at?
Thanks to all who have replied. :D I appreciate it.

MSI X48C PLATINUM BIOS PROBLEM

Hello, i post this topic cause i don't saw any end for my problem, i got the same problem then a lot of people CPU work at half speed i send already message to MSI Customer Service, but what they tell me to do don't solve my problem:
MSI Customer:
As to your issue, please update your MB bios to v7.3A(7353IMS.73A)to fix it.
BIOS/7353/7353IMS.73A
After bios flash, please unplug power supply for a while and clear CMOS (refer to user manual) and load default to "save & exit ".
If you don’t have floppy drive, please make a usb flash into boot device instead.
Best regards,
MSI Technical Support Team
Now i hope i will got some help cause i don't know what to do else
My spec:
Processor
Model Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
Speed 1.50GHz
Cores per Processor 2 Unit(s)
Threads per Core 1 Unit(s)
Type Dual-Core
Internal Data Cache 2x 32kB, Synchronous, Write-Thru, 8-way, 64 byte line size
L2 On-board Cache 6MB, ECC, Synchronous, ATC, 24-way, 64 byte line size, 2 threads sharing
System
System MICRO-STAR INTERNATIONAL CO.,LTD MS-7353
Mainboard MICRO-STAR INTERNATIONAL CO.,LTD MS-7353
Bus(es) ISA PCI PCIe IMB USB FireWire1394 i2cSMBus
Multi-Processor (MP) Support No
Multi-Processor Advanced PIC (APIC) Yes
System BIOS American Megatrends Inc. V7.3A
Total Memory 4GB DIMM DDR3
Chipset
Model MSI X48 Processor to IO Controller
Front Side Bus Speed 4x 167MHz (668MHz)
Total Memory 4GB DIMM DDR3
Memory Bus Speed 2x 167MHz (334MHz)
Video System
Adapter 2x ATI Radeon HD 4870 X2 (1GB, 780MHz2x900MHz, PCIe 2.00 x16, SM5.0)
Graphics Processor
Adapter ATI Radeon HD 48XX (RV770) (1.03, 1GB, 780MHz900MHz)
Storage Devices
WDC WD1500AHFD-00RAR5 150GB (SATA150, 3.5, 10000rpm, NCQ, 16MB Cache) 140GB (C)
CBM Flash Disk 2GB (USB) 2GB (E)
SONY DVD RW DRU-530A (ATA33, DVD+-RW, CD-RW, 1MB Cache) NA (D)
BOR R0L2ZWDUR (SCSI, BD-R, HD-DVD-R, DVD+-R-DL, CD-R) NA (F)
Operating System(s)
Windows System Microsoft Windows Vista Ultimate 6.00.6001 (Service Pack 1)
Platform Compliance x64

BIOS v7.4b2 is a BETA-Release of the BIOS-Series that prepares the upcoming v7.4 Final Version. It is not available for public download and MSI Live Update is not programmed to find it for you.
Also, as every Windows based flash is inherently risky and much more dangerous than any DOS based flashing mething, I suggest you do not use MSI Live Update for BIOS Updates. Unless you are prepared and ready to face the increased risk of a bad flash resulting from using this tool, it is in your own best interest to choose a flashing procedure that will update the BIOS from a plain DOS environment.
I have uploaded the 7.4b2-BIOS (BETA) in the following post. Flash it at your own risk!
>>>https://forum-en.msi.com/index.php?topic=117175.msg924921#msg924921<<<

MSI X48C Platinum booting problems

Hello all,
First of all, I tried using the searchfunction multiple times and didn't find anything helpful.
So I hope you guys can try and help me with this problem since it's a real pain in the ass.
I built a new setup using:
Intel Core 2 Quad Q8300
OCZ Reaper PC3 10666 DDR3 2x2GB
OCZ ModXtream Pro 600W
WD 80GB SATA HDD
XFX 9800GTX+
The system booted fine until it got to the POST-screen with the MSI logo. I googled and figured that the Q8300 was not supported and I had to update the BIOS.
With that being said, I got a replacement CPU (C2D E6600) and tried to boot the system. But I gave me and beep-errorcode; 2 short beeps 6 long beeps, no videosignal
I thought it was either the RAM, videocard or the CPU,
so I replaced the RAM with; DDR2 RAM (Kingston KVR800D2N6/2G)/OCZ PC2 8500 1GB (using the Turbocards for DDR2)
the videocard with: ATI HD 5470
and the CPU with a Pentium 6 630
How many times I tried swapping components, it didn't really matter. The system would still give me these cursed 2 shorts beeps and 6 long beeps.
What I've tried so far;
Clearing the CMOS using: https://forum-en.msi.com/faq/article/how-to-clear-the-cmos
Removing the CMOS battery
Switching between hardwarecomponents as stated above
Reseating the same memory multiple times
In short:
Errorbeep-code: 2 short beeps and 6 long beeps, no videosignal
Really hope you guys can help me,
Thanks.

Confirm that you tested your Power Supply in another system.
Have you tested the MB outside the case, just resting on a non-conductive surface.

MSI K7T266 Pro2-RU - problem with the lite-raid - would like to use it as a normal ide

Hi!
I tried to install a single drive on the raid-controller and create a single array for it.
For some reason the disk management in Windows XP does not see it, even though
I have updated the related drivers. However, the Disk management showed it the first time after I had installed the HD onto the raid, but as I could not do anything intelligent with Disk management in regard of the HD, I removed the drive from Disk management with that effect that the disk management does not recognize the drive at all, even though I have now re-created the array on the risk, disabled and enabled raid on the Bios.
I read that there exists modified bios for MSI KT3 Ultra ARU BIOS, which will turn the Raid into regular IDE. That would be something that would most probably be the best way to proceed for me. However, do such bioses exist for MSI K7T266 Pro2-RU? Any other suggestions on how to get the disk management to succeed in recornizing the IDE on the raid-controller would be good to hear as well.
Yours sincerely,
Tero

Ok, I tried updating with the hacked 3.7 Full Raid Bios. Now I seem to have another problem: even though the hacked bios recognizes my HD, it thinks it's about 130 GB, when it in reality would be 250 GB. The hacked bios seems to work ok with Disk Management in Windows XP too, so it's a shame that the hacked bios doesn't seem to have a support for large disks. On the other hand the link at Lumberjacker was dead for the hacked bios v3.6, I would have tried it, if it would have provided me with a good solution to my problem.
I then went back and installed the official v3.7 bios and the lite raid does now recognize the HD being 250 GB, but the Disk Management just states "Missing" in regard of the HD and does not let me do anything fruitful with it. I looked the HD's properties and the Device Manager just states "Hardware device not connected code 45".
How in earth could I manage to make this work now (I do not want to move my other HD:s as they are full of stuff and don't want to risk losing any content)?
General specs of the computer: IDE 1: 60 GB and 120 GB Matrox, IDE 2: Nec2500 and Sony DVD-Rom, Athlon 1800+ XP, 512 MB memory, Ati 9700 np, Network adapter card. The new HD to be added is a 250 GB WD (have removed the jumper)
Thank you for any tips,
Tero

MSI Mega Stick 1 problem with Nforce 2? Look here

I love this stick, so I didn't give up to find a solution. With SP 1&2 it freezed when there is data communication. Now it's gone how?:
Flash the latest firmware of Mega Stick II to your Mega Stick I
After installing MSI driver, it freezed again

Actually i am having this problem also. Msi mega 256mb mega stick is not compatible with abit mobo NF7-s as i had tried to use it with other computers which is using nf7-s mobo also. But it comes to normal when i plug it into my my housemate computer which is not using nf7-s mobo. I am wondering of how to solve this problem for long long time already. Can anyone tell me how to solve it? Even i had updated the firmware to the newest but the problems still occur.

MSI MediaCenter Deluxe II problems

Hello,
I have recently purchased an MSI FX 5900xt card, and to try its multimegia features I installed the mediacenter. I live in Hungary and use a Hungarian Windows XP. I theory mediacenter knows hungarian language.
BUT
At the top of the window, the time/date isshown correctly, but on the buttons there is no text, i only see a row of empty squares instead of "watch TV, listen to music, etc." When I change regional settings, language settings and unicode conversion to english the software works correctly (although it shows everything in english, not hungarian, but it wouldn't be a problem if it would remain like that), but I cant leave these settings like that, because many of my softwares need the original settings. It were fine if the program could remain in English language, but i havent been asked which language I prefer, and i cannot change that in setup.
Plese Help me!!!

Well thanx a lot for trying to help...
I guess I have to wait for update or patch.
And I don't want to install Madia Player 9. I don't like it very much. Everything I need, is in Media Player 7 and without Microsoft SPYWARE included in Media Player 9.
So much for MP9.
Is here in forum someone who is from MSI and can tell me, when some update or patch will be available?
Thanx a lot

MSI 760GMA-P34 (FX) Problems

Hi i have this is issue. I recently made a new pc and i have a problem from the start. When i run the system and getting into windows the pc will stuck making some noise from speaker and then restarts witout blue screen appearance even if i have check not to automatic restart. The problem occurs at random times but mostly when i go to open a game the system always restarts. I tested all the parts on another computer and everything worked perfect. Please help me thanks in advance. All the components are at their normal clocks nothing overclocked. Used all the latest drivers.
Here are my full pc specs:
Motherboard: MSI 760GMA-P34 (FX)
CPU: AMD FX-8350 4.0GHZ 8-CORE BOX
PSU: THERMALTAKE SPS-630MPCBEU SMART SE SERIES 630W CM 87+ PSU
GPU: Gigabyte Radeon R9 290 4GB Battlefield 4 Edition
HDD: SEAGATE ST1000DM003 1TB BARRACUDA 7200.14 SATA3
SSD: CORSAIR CSSD-F128GBGS-BK 128GB 2.5'' SSD SATA3 FORCE GS SERIES
RAM: G.SKILL F3-1600C7D-16GTX 16GB (2X8GB) DDR3 PC3-12800 1600MHZ TRIDENTX DUAL CHANNEL KIT

it may work at idle (MSI do not put them at load in test as they only check it works) at load as we have had many reports that they throttle back to 800-1400MHz and report a Temp on the VRMS of 255C that is a automated throttle! <--- the MSI CPU support pages can sometimes be miss-leading as flobelix said its a 95W board and that 125W CPU will cause thermal throttling under load!
as for it not starting and just looping that may be due to a unsupported CPU due to a unsupported BIOS for the CPU so what is the boards BIOS version it has or what is its serial number of the board? <--- if your CPU is a low TDP one that is very good it may work ok but I would suspect even if it is a lower TDP one it may in time degrade and the board will thermal throttle as it will pull more power and overwhelm the board!
you where warned not to try using that CPU by flobelix so as you disregarded that its not surprising that your having a problem immediately using it!

MSI CR/RW 8348 problems

Similar Messages

Maybe you are looking for