Msi cr630 only working on additional screen

Hi
I am new member to the forum,I had problem with the hinges and screen lid and changed these but after changing these  screen of the laptop has gone blank though it does work on additional attached screen.
I have reset the laptop to its original factory settings ,have checked the video graphics cables number of times and then bought another one to replace but this all failed.
Any one who can help me in this regard.
Thanks  in advance
AA

**  EDIT **  I just had a huge brain fart.    Have you tried adjusting the "FingerLow" and "FingerHigh" options?  Maybe its not picking up touches correctly.
I had the same happen to me after my recent re-install.  Installing the xf86-input-synaptics package fixed it.
https://wiki.archlinux.org/index.php/Touchpad_Synaptics
Apologies if you already have it installed.
Last edited by Forgotten Path (2015-04-29 21:21:56)

Similar Messages

  • Macbook air built-in keyboard/trackpad only work at login screen

    The built-in keyboard and trackpad have become unresponsive on my 2013 refurbished macbook air. When I restart it, everything works normally at the login screen, but becomes unresponsive again once I've logged in. The computer works fine with external inputs or a shared screen.
    I've recently updated to yosemite. The fact that everything works up until login makes me think this is a software problem. I've tried all the troubleshooting steps listed here, and I've reset PRAM and SMC. Does anyone know what could be causing this?

    Hi,
    I was able to get result from apple store after 24 days not hours days. They said it's my fault and they have found liquid inside of it and when i asked to see pictures of it they asked for COURT ORDER and repair will be cost around 400$.
    I am %100 sure that my macbook air never touched with liquids.
    I was using it for business and not even fluids there isn't any one scratch on it. I have been very careful.
    Did they asked 400$ for you too ?
    I am also using mac mini and iphone 5s. I think i will never buy an apple again.
    And i will definetly go to court.
    Repair R146244431

  • External monitor works only works when laptop screen displays

    Hi there, I just connected a different (newer, but not brand new) external monitor to my T61.  When I toggle screens (fn-f7) the external display gets no signal in the 'external display only' position, but displays beautifully in the 'both' position.  This never happened with my old monitor.  I would like to use the external display and not have the laptop screen display.  Any ideas? Many thanks, Ellen

    H
    Try this:
    After connecting external monitor, press win key+p and thrn choose projector only.
    Have a nice day
    Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
    If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

  • N95-3 (NAM) only works with old screen

    I have recently acquired an n95-3 which had an LCD screen which displays properly, but the display is very dim and flickering (backlight is fine).
    I therefore ordered a replacement screen for an n95 and the screen displayed no picture, but backlight is OK. I tried with the screen on my friend's n95-5 (China) with the same result. I'm confused as to why the old screen works but the new ones don't. Are the pinouts different?

    Ankush,
    Thank for your two responses.  I have also received some more emails from Chris Campbell around AIR in particular so I'll try to work with him first.
    Thanks you for confirming that you do not see any errors after installing the updates.  Also that Adobe Help and Inspiration Browser both work after updating AIR to 2.0.4.
    I will answer your questions for now though:
    1. You asked:
    Have you tried this:
    Uninstall PSE 9, PRE 9 and any other CS5 Adobe application.
    Uninstall Adobe AIR.
    Install PSE 9 and run the updates of Adobe AIR and now use the applications?
    If it still gives error, uninstall Adobe AIR and then install the 2.0.4 version directly which is available on Adobe.com.
    What happends now?
         Yes, I have done all of these combinations a few times without success.
    2. The directories for Adobe Help and PIB look fine.  They are
        C:\Program Files (x86)\Adobe\Adobe Help
        C:\Program Files (x86)\Adobe\PhotoshopdotcomInspirationBrowser
    As I said, Chris Campbell has asked me for info and to run some tests.  I'll let you know how it works out.
    Thanks . . . . Brian

  • Screensaver ONLY working, not main screen, or anything else for that matter

    I just got a new TV a few weeks ago and have bene able to use my Apple TV to listen to music, without even pulling it up on the TV (Just using my iPhone to stream to ATV).
    Here's my problem: The main screen will not show up from the Apple TV.  However, the screen saver will show up when that comes up, so it doesn't appear to be a wired connectivity issue.  Anybody have any idea why I cannot do anything on my Apple TV except the screensaver?

    This problem has nothing to do with the remote.  The Apple TV is still functional with the remote.  The problem remains that I can see the screensaver, but not the main screen on the Apple TV.  As soon as I press a button on the remote while the screen saver is running, the screen goes to black. 

  • Notification center and control center only work from lock screen on my iPhone 6

    When I try to swipe down to get notification center or up to get control center from any screen but my lock screen, I can't.  Is there a setting or something that I need to change?

    That is correct. Are you starting from off the screen area itself? You cannot start from on the screen. You need to be just off of the screen to begin. See if that helps. If not, then do a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Check operation after that.

  • XD01 Customer data Additional Screen

    Hi,
    I have created a BADI implementation for XD01/02/03 to add custom screen with additional customer fields using BADI CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS. Works well, customer master now has a new button that brings me to a screen I defined.
    Now I have a requirement to only show this additional screen button for certain Sales Area and I cannot find a way to do it.
    I can hide tabs on custom screen by Sales Organization, but activating whole button+screen functionality looks to only be possible before Sales Area data is known during IF_EX_CUSTOMER_ADD_DATA~CHECK_ADD_ON_ACTIVE
    Is there something I am missing?
    Jurijs

    Hi Jurijs,
    Have you checked the method 'SUPPRESS_TAXI_TABSTRIPS' for the BADI definition 'CUSTOMER_ADD_DATA_CS'?  It looks like maybe you can use this to suppress the tabs based on your sales area requirement.
    Regards,
    Ryan Crosby

  • I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

    I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite.  Please help!

    Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

  • I cracked my screen. I want to use other monitor which I had one. I bought Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

    I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

    You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.

  • My macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help.

    my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
    disk utility give me this:
    Process:         Disk Utility [371]
    Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
    Identifier:      com.apple.DiskUtility
    Version:         11.5.2 (298.4)
    Build Info:      DiskUtility-2980400~60
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [86]
    Date/Time:       2013-11-05 03:29:41.247 -0500
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          9522 sec
    Crashes Since Last Report:           29
    Per-App Interval Since Last Report:  981 sec
    Per-App Crashes Since Last Report:   25
    Anonymous UUID:                      F6B8E263-76C8-4C7D-AA58-48134BF4BA78
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   libobjc.A.dylib                         0x0000000100c62fbc _read_images + 312
    1   libobjc.A.dylib                         0x0000000100c79721 map_images_nolock + 1266
    2   libobjc.A.dylib                         0x0000000100c62761 map_images + 115
    3   dyld                                    0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
    4   dyld                                    0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
    5   dyld                                    0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
    6   dyld                                    0x00007fff5fc08f7c dlopen + 490
    7   libSystem.B.dylib                       0x0000000100a14e40 dlopen + 61
    8   com.apple.CoreFoundation                0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
    9   com.apple.CoreFoundation                0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
    10  com.apple.Foundation                    0x0000000101008355 _NSBundleLoadCode + 638
    11  com.apple.Foundation                    0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
    12  com.apple.Foundation                    0x000000010101960c -[NSBundle principalClass] + 38
    13  com.apple.framework.DUSupport           0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
    14  com.apple.framework.DUSupport           0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
    15  com.apple.DiskUtility                   0x0000000100006082 0x100000000 + 24706
    16  com.apple.DiskUtility                   0x0000000100005f59 0x100000000 + 24409
    17  com.apple.AppKit                        0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
    18  com.apple.AppKit                        0x00000001013e1f77 -[NSWindowController window] + 112
    19  com.apple.AppKit                        0x00000001015f61d9 -[NSWindowController showWindow:] + 47
    20  com.apple.AppKit                        0x00000001015c7c5c -[NSDocument showWindows] + 98
    21  com.apple.AppKit                        0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
    22  com.apple.AppKit                        0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
    23  com.apple.AppKit                        0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
    24  com.apple.AppKit                        0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
    25  com.apple.AppKit                        0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
    26  com.apple.Foundation                    0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
    27  com.apple.Foundation                    0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
    28  com.apple.AE                            0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
    29  com.apple.AE                            0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
    30  com.apple.AE                            0x0000000104d7312b aeProcessAppleEvent + 210
    31  com.apple.HIToolbox                     0x00000001028a0619 AEProcessAppleEvent + 48
    32  com.apple.AppKit                        0x00000001013fc095 _DPSNextEvent + 1191
    33  com.apple.AppKit                        0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
    34  com.apple.AppKit                        0x00000001013c168f -[NSApplication run] + 395
    35  com.apple.AppKit                        0x00000001013ba3b0 NSApplicationMain + 364
    36  com.apple.DiskUtility                   0x0000000100002009 0x100000000 + 8201
    37  com.apple.DiskUtility                   0x0000000100001db8 0x100000000 + 7608
    Thread 1:  Dispatch queue: com.apple.libdispatch-manager
    0   libSystem.B.dylib                       0x0000000100a27c0a kevent + 10
    1   libSystem.B.dylib                       0x0000000100a29add _dispatch_mgr_invoke + 154
    2   libSystem.B.dylib                       0x0000000100a297b4 _dispatch_queue_invoke + 185
    3   libSystem.B.dylib                       0x0000000100a292de _dispatch_worker_thread2 + 252
    4   libSystem.B.dylib                       0x0000000100a28c08 _pthread_wqthread + 353
    5   libSystem.B.dylib                       0x0000000100a28aa5 start_wqthread + 13
    AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

    Sounds like the battery is shot and in need of a replacement.  You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
    Not much else you can do for troubleshooting this one.
    B-rock

  • Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

    Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

    I seem to have fixed it by putting <div  class="clearfloat"></div> after the navigation bar?

  • My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

  • The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video.

    The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video.  When I open the app the screen is just blank. As it is a default app I can't delete and reinstall. Anybody else experience this?

    Try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
    If that doesn't work then try closing the Videos app via the taskbar : from the home screen (i.e. not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I dropped my iPhone 5s yesterday and then I picked it up but I couldn't unlock it. I have a password but only half of the screen is working I couldn't press anything on the right half. So I turned it of and on but it is still the same

    I dropped my iPhone 5s yesterday and then I picked it up but I couldn't unlock it. I have a password but only half of the screen is working I couldn't press anything on the right half. So I turned it of and on but it is still the same. The screen look perfectly fine but I can press the numbers 3 6 9 or cancel

    Take it to your closest Apple store and have them look at it.

Maybe you are looking for

  • Purchased app will no longer sync

    To summarize, I had to do a restore and one of the apps I purchased won't sync to the phone any more (unknown error occurred 0xE800002E) and the App Store asks me if I want to buy it (rather than offering it to me to re-download). What should I do?

  • The folder "iTunes" cannot be found or created, and is required.

    Hello, I cannot start iTunes. When I do, I get the following error message: The folder "iTunes" cannot be found or created, and is required. the default location for this folder is inside the "My Music" folder. I have reviewed and gone through the re

  • In Photoshop elements 13, the elive button does not appear in expert mode.

    This is happening in the trial version. Windows 7,  hp530 laptop.

  • Filename creation options like AudioGrabber

    When I rip a Cd in I-Tunes to MP3, two folders are automatically created, one with the name of the artist, and a sub-folder with the name of the album. In this sub-folder I can find the filename. Well, as a professional DJ, I do not like to organize

  • Quicktime Conversion - Save previous settings?

    On several of our Final Cut systems - When we export using quicktime conversion and then close out of Quicktime, it defaults back to H.264 and mono audio. Any easy way to get the system to save certain settings? Thanks!