MSI display properties

I just installed a new FX5600XT VTDR 128 on a K7T266 Pro motherboard. I installed the VGA card driver with the disk delivered with the VGA card.
The problem is that I don't have the MSI Information tab and the MSI clock tab in the Windows based display properties.
I did a live update off the VGA drivers and the drivers off the motherboard, but that did not change anything.
Pls Help

I used to have that problem..you may download as much times the latest nvidia drivers that it won't change..thing is the drivers you installed from the cd which was the same thing it occured with me I tryed uninstalling them from the device manager or driver cleaner and it just didn't do no good..the best thing you have to do is install a new copy of windows and run live update monitor so it selects the drivers and you install it. That should solve the problem.

Similar Messages

MSI display properties problem

i have a ms star force geforcefx 5600 video card installed as well as the software which came with it ,MSI media centre deluxe 2,i noticed the other day when i click on display properties and click on msi information i get an error which reads (run dll as an app has encoutered a problem and will close),
i aslo tried to uninstall msi media centre to see if this might be the cause as the problem was first noticed not long after it was installed but it come up with an error(msidrif.dll(0x001)problem loading dll. can anyone help me get rid of this program or fix the other problem
thanks Dave

Uninstall the MSI drivers and Install Drivers from nVidia
http://www.nvidia.com/content/drivers/drivers.asp
If you want to overclock see link below
http://oc3dmark.octeams.com/tip02.html

MSI tabs in Display properties

whenever i try to use the msi tabs in the display properties i get this error
Run a DLL as an App has encountered a problem and needs to close.
and when i click on the button to see what data the error report contains i get this information
AppName: rundll32.exe AppVer: 5.1.2600.0 ModName: msicpl.dll
ModVer: 1.0.0.1 Offset: 00004261
I am running winxp and have re-installed it a few times to see if that would fix the problem, then i tried taking the card out and putting it back in, but no luck either, I have the newest drivers as well and nothing works,
any idea anyone???

Hi guys,
I posted something about this exact problem...
Hi everyone...
I just bought an MSI GF4 TI-4200 128 and have the same problem. Running XPPro, fresh install. I was running MSI GF3 TI-200 64 before with same OS and had no problems with either the properties and the MSI Live Update 2. Now, when I try and access the MSI properties in the Display properties, I get that same error (see at beginning of thread) and the window will close. When I try and use the MSI Auto Update, I get the vbios.dll could not be loaded or found... (or something similar) and can't use the Update. I "bypassed" the problem by loading the NVIDIA drivers instead of the MSI ones and it works like a charm now...
I am pretty sure that the MSI drivers would have worked anyhow but I have'nt tried them. BTW, I can access the NVIDIA properties no problem!
I will also send a request to MSI to let them know that I am now aware of this "known" problem and am awaiting a fix for this... I will also check with ASUS for a motherboard compatibility issue.
XPPRO fully patched
MoBo Asus P4B-533 (latest bios, 1007 I think)
512 DDR-2100
Sound Blaster 128
Maxtor 40gigs 7200
Intel P4 1.7
PS 300W Antec
etc...etc...
To Moderators: Is there a fix for this and if not, could you let me know (by link, email or post) what could be the problem (i.e.: ASUS moBo.)? I am quite content on using NVIDIA drivers but still, my inquisitive nature is acting up...
I haven't tried yet but will I be able to Flash my VGA bios if I have that problem? (is this VGA card related or a compatibility issue with something else?)

No MSI info and MSI clock speed flags in display properties

My problem is really curious. Several days ago I bought new harddrive and made clear instalation of Win98 SE. After that I installed VIA 4 in 1, on-board audio drivers, the new DirectX and then DetonatorXP drivers for my G4 Ti 4600. My problem is that in display properties I miss two flags descrabing my nVidia card - MSI information and MSI clock. System has detected card correctly. In advanced display properties I can adjust OpenGL and Direct 3D settings, AA settings, etc.
My system is stable in every game and benchmarks, so it means that card works correctly. Powerstrip detects core and memory speeds correctly, under adapter options in this program I see 128 MB video memory, AGP 4x enabled, fastwrites enabled - everything is correct.
But in display properties I do not see MSI information and MSI clock speed flags. Why ??? I have also reinstalled VIA 4 in 1 and Detonator XP drivers - it did not help.
Before byuing my new harddrive (80 GB Seagate,7200rpm) I had 30 GB IBM,5400rpm. Windows 98 SE installed on this harddrive detects card correctly too including MSI information and MSI clock speed flags. Now I miss it. Any idea ???
On both harddrives I have installed DetonatorXP 29.42 then I have updated to 30.82
My system:
MSI K7T Turbo 6330 3.0
1,33 GHz Athlon T-bird
512 MBRAM
G4 Ti 4600
80 GB Seagate BarracudaIV 7200rpm
Win98 SE

I installed the MSI Drivers from the MSI cd. All ok but the clock and info tabs were missing. I upgraded the driver from msi site to 3000 and no tabs.
X(
Before the GF4 i had a gf2 and i realized i forgot to uninstall the nvidia drivers before installing the new card's drivers. I uninstalled them and reinstalled the msi driver 3000. But no clock nor info tabs.
Can someone help me? Are those tabs needed?
I'm using xp pro, intel p4 1.8 on motherboard intel d850md, 1gb ram.
Also the 3d turbo experience gives me msivga.ocx initialization error.
Thanxs.
Quote
Originally posted by Assaf
The MSI tabs only show if you use an MSI driver from the MSI website.
They are nVIDIA drivers with the added MSI tabs and logos...
But there is no real reson to do it.

Cannot set resolution with gnome-display-properties

Hey all!
After full system update my external display does not get detected/recognized properly by gnome-display-properties
Though before upgrade it worked just fine!
Tried to downgrade hal and xorg-server but without any success.
Any ideas how to fix?
Thanks!

I have the same problem. I do, like You, own a ASUS P4S8X motherboard and a MSI (Ti4800SE-VTD8X(MS-8900))videocard.
Because it was a brand new system i installed everything from scratch, so installed the MSI drivers for the videocard. Afterwards i thought i that it would be better to download the latest nvidia drivers. Since that time i have the same problem with the property settings of the videocard, Ghost Recon (original and supplied version) does not work anymore as goes for liveupdate of msi.
There is a solution but i think it is CRAP. You have to uninstall nvidia drivers and reinstall the original msi drivers.... bla bla bla... Why is it that there are a lot of known errors with msi/nvidia drivers in conjuntion with the liveupdate, supplied games and with the settings?? I would like to see a (driver)update from msi which is for mortals. I'm not the hacking and phreaking guy, and so are more. I have spent a fortune on this card so MSI get started!!!!!!

Display Properties shows 32mb, not 64mb

I was wondering if anyone else has seen this:
On the MSI Information tab of the Display Properties, the memory and type indicate 32MB SDRAM, instead of 64MB DDR as the manual shows. This is a 64MB card, and it is detected as such by everything else on the system. All benchmarks show the correct amount and type, 64MB DDR. The driver doesn't seem to make a difference as I had the same properties whether I used the MSI driver or the NVIDIA. And yes, I uninstalled the old drivers before I put in the new ones. Anyone? ?(

I got everything to work good and wanted everyone to know the results.
First of all, thanks to Deathstalker for all the help, here and in the other threads.
I stole most of this info from the following thread:
http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=12236&boardid=9
1st step is to download and install new NVIDIA drivers. I've used the 41.09 release version from NVIDIA site and the 42.86 beta version from http://www.guru3d.com. Both work well so far. Be sure to uninstall the previous drivers before adding any new driver.
2nd step is to DELETE msicpl.dll from the /Windows/system32 folder and the msicpl.ini from the /Windows folder after you install the NVIDIA drivers.
3rd step is to use notepad to make a new file and put in it the following:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\NVIDIA Corporation\Global\NVTweak]
"Coolbits"=dword:ffffffff
"NvCplEnableAGPSettingsPage"=dword:00000001
"NvCplEnableAdditionalInfoPage"=dword:00000001
"NvCplEnableClearViewPage"=dword:00000001
Save it with the .reg extension. This will open all the extra options in the NVIDIA Drivers including the Core and RAM Speeds for your GF4.
4th step is to double click the .reg file you created and install the registry entries.
5th step is to reboot and enjoy! Check the Advanced tab in Display Properties to verify the tweak. It's buried a bit, but it's there.
This method worked great for me! No more crappy MSI tabs with funky info. If you need help, send me PM or IM.
Best of luck!

Display properties tab

Well everything is working fine, except...
Well basically I uninstalled the MSI drivers and installed the latest NVIDIA drivers from their website. Now my Display Properties have all the tabs from the MSI dual core center(or another MSI product). The only things I have is the MSI Update tools. I would like to know how to remove these tabs from my Display Properties(where you change your screen saver and wallpaper). I looked in my add and remove programs window and I dont see anything that relates. I would love if someone could tell me how to remove it (whether it be regedit or some other way). I've looked around in regedit and I didn't have much luck. I think when I just directly removed the driver it left it there. But I dont really want to uninstall my Nvidia drivers, reinstall MSI drivers, then uninstall and then reinstall my nvidia drivers... if you get what I mean. Anyhow thanks in advance!
Help is appreciated. BTW, the Geforce 8600GTS is pretty dope, love the card.

goffy59,
Always glad to help.
Take Care,
Richard

6600gt display properties not showing nvidia

This is my first nvidia card and I can't get the display properties to change so that the MSI clock and information shows on it. What am I doing wrong? I just got it today and can not figure out what I did wrong.

I had the same problem, here is how I resolved this issue. --------------------------------------------------------------------------------
A few weeks ago I had posted that the DOT tabs on my display properties had vanished and being the smart guy that I think I am the only way of resolving this issue was to uninstall SP2. After removing SP2 my DOT tabs were back, I chalked this up to another program that wouldn't function correctly with SP2, I also posted to another forum member who had a similar problem and offered my advice as to resolving this issue.
I would like to apologize to anyone who may have taken my advice and uninstalled SP2 to recover the vanishing DOT tabs. I can promise anyone who cares that before posting again I will do a better job of fixing my own before I try to fix yours.
If you haven't fallen asleep yet reading this I will tell you how I solved this problem. I reformatted my drive reinstalled XP Pro with SP2, updated all drivers, my system and my DOT tabs are functioning happily together.

How to display properties of dimension on the input form and report in bpc

Dear Expert,
Please tell me how to display properties of dimension on the input form and report in bpc. I can only display dimension number.
thanks so much
hungth

Hi Hungh,
If your are using BPC 10 with EPM add in client, you can use the function:
EPMDimensionProperty ()
This function retrieves the properties of a specified dimension in a specified cell range.
Thanks, Safa

Can't change displayed properties in resource renderer

Hello everybody!
I'm trying to do display a very simple list of filenames in a KM navigation iView. I've assigned a layout set, which references a collection renderer and a resource renderer. In the resource renderer, "Visible Properties" is set to rnd:displayname(contentlink).
But still I get a list with filename, file size and timestamp. No matter what I put in the "Visible Properties" field, the same thing is displayed.
I've verified that the layout set references the correct resource renderer by changing other attributes ("Command Display", for instance), and these changes do have an effect.
Any ideas what might be the problem here?
One more thing. This iView is a dynamic navigation iView. How can I make the documents open in the content area of the portal instead of in a new window?
Any help is very much appreciated.
-martin

Hi Martin,
seems like you have selected a collection renderer for "structured output", like the grid or tree collection renderer. In this case the collection renderer is the one who is responsible of the properties displayed.
So what you have to do is edit the parameter "Displayed Properties" of your collection renderer with the properties you want to display.
Check this <a href="https://forums.sdn.sap.com/thread.jspa?threadID=28751">link</a> for more info about "unstructured vs. structure coll. renderers".
Hope this helps,
Robert
PS: The iView Property "Launch in New Window" should be set to "Display in Portal Content Area", in order have the iView displayed as you wish.

How to set up display properties for a crosstab is CSS?

I am woundring how to setup css class and code like in this tutorial.
myalerting.css ?
Set up display properties for a crosstab: Design Studio 1.2 - YouTube.
Design Studio 1.2: Set up display properties for a crosstab
if you have sample file please share I am sure other can be befits from as well.
I would like to use color display on numbers or icons in seperate column if the value in certain range or a value is below or avove business needs.
Thanks.

Kevin,
I could not get this to work on my installation; perhaps you can review and "run with it" or someone better with CSS can assist.
The gist of it is there is a class .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background to define the status symbol for the alerts
Based on your Exceptions in the BEx query, Good 1 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
Good 2 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
etc... Bad 3 (red symbol) is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9Background
I tried the following custom CSS on the crosstab, note using IE (which now we can no longer use until Microsoft patches)
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlternating{
background-color:#F9F9F9 !important;
myAlerting.sapzencrosstab-DataCellDefault{
background-color:#FFFFFF !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_1.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert2Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_2.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
color:rgba(0,0,0,0.0);
background-image:url('green.png');
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9StatusSymbol
color:rgba(0,0,0,0.0);
background-image: url('aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_9.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
I didn't want to hold you up and for sure I hope there is someone in the community who could help. I'll try again when we can use IE

Displayed Properties in Collection List Renderer are not displayed

Hello All,
I have created one custom property and entered the value for a resource which had that property.
Now, when I am trying to display the custom property in any layout, its not coming, even though I have added the property name in the Displayed Property of the collection list renderer.
To check the view is taking the correct layout or not, i changed some other settings of the collection list renderer and the changes are immediately getting reflected. What could be the problem here?
Any help, deeply appreciated
Regards
BP

Hello Bobu,
Are you using a different Namespace Alias other than 'Default' in your property definition? If so then you need to specify the property in the 'Displayed Properties' parameter of the collection renderer as <NamespaceAlias>:<propetrty ID>, e.g. rnd:displayname.
Other than that you should check the 'Folder Validity Patterns' and 'Document Validity Patterns' to make sure they are valid for the content on which you are trying to display this property, you may have already checked this.
Regards,
Lorcan.

Rnd:action in displayed properties of resource renderer to open a webdynpro

Hi,
In the collection renderers of the SAP KMC, we define the displayed properties as below.
rnd:iconrnd:displayname(contentlink)rnd:action
Which means that the displayname of the resource is shown as hyperlink and we click on it the resource opens in the respective editor.
I have an requirement when I click on the hyperlink of the display name I want to open a webdypro application. How can this be achieved.
Any inputs will be of great help.
Regards,
Sreeram

Hi,
Firstly thanks for your quick reply. My requirement is , I have some images in a folder in KM of portal for example : /document/IMAP. If I click on this file , it should invoke a webdynpro application. I have follwed ur blog and created a oth file and uploded in /etc/oth folder. After doing this I thought when I click on any file in /documents/IMAP folder the webdynpro application will open but its not happening.
my oth file is as below
<?xml version="1.0"?>
<ObjectTypeHandler Name="IMAPOTH" Class="com.sapportals.wcm.service.objecttypehandler.GenericObjectTypeHandler">
<SelectionCriteria>
<Paths>
<Path>/documents/IMAP/**</Path>
</Paths>
</SelectionCriteria>
<Actions>
<Action>
<ActionType Type="view" Namespace="http://sapportals.com/xmlns/cm"/>
<ActionURL URL="/webdynpro/dispatcher/local/DropDownApp/DropDownApp?Resource=<resource.uri>"/>
</Action>
</Actions>
</ObjectTypeHandler>
Regards,
Sreeram

Missing Display Properties

Hi,
Not sure how but all the tabs, except background, are missing on my Display Properties in XP Pro. I've checked in regedit and all have 0 as Value Data and I am logged on as Administrator and not on a network. The strange thing is they are all showing perfectly when I boot in SAFE mode - any ideas greatly appreciated.

Spyghost,
Set your desktop resolution to 16Bit and remove any files you have on your desktop.
No need for you to keep rendoring your desktop in the background while playing a game.
Then in the settings I would do these tweaks:
Performance & Quality Settings
Performance - Aggressive
Antiailiacing - Off
Anisotropic Filters - Off
Direct3D Settings
Enable Fog Table Emulation - On
Mipmap Detail Level - Best Performance
More Direct3D
Vertical Sync Mode - Always Off
Render no more than - 5 Frames Ahead
OpenGL Settings
Default Color Depth - Use Desktop Color Depth
Buffer-Flipping Mode - Auto-Select
Vertical Sync - Off by Default
As for the overclocking section, you can use it at your own risk. For now run without overclocking.
Take Care,
Richard

Display Properties

Using a laptop and running on Windows XP. Frequently, when booting up, the screen resolution is 1024 X 768 and display is distorted. When I go to settings in display properties, I cannot increase the display to 1280 X 800. Rebooting sometimes helps, but the next time I turn it on, the setting reverts to 1024 X 768. How do I correct this?

have you installed all the drivers?
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

MSI display properties

Similar Messages

Maybe you are looking for