MSi Dragon Editon 2 problems booting with usb mice

Hi to all people. I have a problem with my laptop. If i update my BIOS with versions newer tan E1763IMS.50V the laptop doesn´t boot with usb mice connected. I think i answer this in the past but with not solution and now i ask again thinking some people have a solution now.I have checked with differents EC versions and BIOS E1763IMS.50V and with all versions works fine. If i update the BIOS E1763IMS.50V with other newer BIOS the problem appears. When the pc is started and Windows 8.1 is charged i can connect the mouse and works fine too. I have checked with various mices and with all the problem appears. The only BIOS that works fine is E1763IMS.50V.
Thanks a lot for your help

I borrowed a GT70, plugged my SteelSeries Rival optical mouse and flashed with the same 50V version to the laptop. It boots & works normally.
And then I flashed to 518 version. It still boots & works normally.
So maybe your problem is not on the mouse?
Did it boot up if unplugging the mouse?

Similar Messages

MSI P43 won't boot with usb devices connected

My system:
MSI P43 Neo
Intel Core 2 Duo E8400
NorthQ Black Magic 850 watt PSU
Corsair 4 x 2GB ram PC2-8500 1066MHz
Seagate 320 GB hd
Hitachi 1 TB hd
Samsung 1.5 TB hd
Club3D Nvidia GTX275 1,75 GB
Samsung DVD Write Master
When i try to boot i freezes at the detecting usb devices when i have a usb device connected. It does with any usb device. But when i boot up without any usb devices connected then i boot fine and i can connect the devices right after the detection of usb devices. How can that be?

Googled on "computer not booting with usb code 6b38" and found this:
Quote
****SLOW BOOT-UP in POST SCREEN****
P.S. If you see the BIOS code 6B38 in the bottom right corner of the screen, this is a indication that USB Legancy support is enabled in the BIOS. If this is enabled and you have any usb devices attached such as a external USB Hard drive, your system will take ages to go through the POST boot screens.
So disable this setting in the BIOS and the system will then boot in a matter of Seconds
From:
http://www.rebelshavenforum.com/sis-bin/ultimatebb.cgi?ubb=get_topic;f=30;t=000250
Also try and see if a clear CMOS will help, some people suggested that from a old post from MSI forum here, saying its bios 1.3 thats bugged.
So if disabling doesnt work, perhaps down/upgrading BIOS might.

Neo 2 Platinum freezes while booting with USB HDD attached

This system freezes when a powered-on USB HDD is connected. I realize that the system is trying to boot off the USB device and have disabled all of the USB boot options in the BIOS. However, DISABLE USB HDD is not one of them! Is their any BIOS or other fix available for the problem?
Moe

After bios update , clear cmos with jumper onboard .
After that you must enter cmos setup and "Load optimized defaults" followed by save+exit
Sounds to me bios if looking for MBR on attached USB HDD ( didn't do this on my Neo2 with 1.C bios and external USB attached)
Set the normal boot order to
Floppy
Cdrom
HDD
Boot other devices :Disabled
(other boot order can mock things up)
Find "USB KB/Storage support" set to:Enable
Save+Exit
Boot with USB HDD attached and enter the submenu of "Harddisk boot priority" in cmos setup and all recognized HDD's
wether they are IDE/SATA/USB shall be listed , move your OS HDD witch host bootfiles/mbr to top with PGUP key and save+exit .

Neo2 Platinum - How to boot with USB storage?

Hi,
I can't find in any bios setting to enable boot with USB storage... It recognize the USB storage drive but not booting it. I am using Imation 256mb memory stick. It boots in other system where there is option to select in bios, but not with Neo2. please help

Some older threads dealing with the same issue :
https://forum-en.msi.com/index.php?topic=76565.msg540210;topicseen#msg540210

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

K8N Neo4 Platinum SLI - Booting with USB attached

I've been unable to find anything definitive about this, so here goes:
I have problems with booting (hangs on post) when I have USB devices plugged in (i.e. thumb drive, ext USB drive, USB scanner). I am using v3.6 now, but haven't tried v3.7. I've received advice in the past to check BIOS - disable boot to USB device - but it still doesn't fix the problem.
Anyone experience this and know exactly how to fix it? I'm tired of disconnecting/reconnecting everything all the time.
Thanks!
MSI K8N Neo4 Plat SLI
Athlon64 3200+ 939 Venice
1GB (512MBx2) PC3200 DDR OCZ Value Series 2.5-4-4-7
Leadtek GeForce 6600GT
Hitachi 7K80 SATAII 80GB x 2 in Raid 0 (nVidia RAID controller)
Antec True Power II 550
Sony DRU-500A DVD+/-R/RW
Windows XP Pro SP 2

OK
I decided to take the plunge and update to BIOS v3.7, which I hate doing because MSI tends to break things while fixing others in their updates.
And guess what....it works!!!!!!!
I plugged in a thumb drive, USB scanner, and external USB hard drive, and it boot with them all connected.
So far so good

Problem Booting with default SSD set on Bios

Hi
I have two SSD each one have a system for boot one I use for everyday work and another one for gaming.
I set on boot the SSD for work as default for boot, it works for several days and then end up to boot from the second one.
It's very difficult to press F11 to get boot option but if I menage I can boot with no problem from it.
So I ask to my retailer and they told me that maybe SMART Tech. check the ssd and if find something wrong it boot form the second option.
I check my everyday work SSD with CHDISK and HDtune but there is no problem or error.
I am lost to find the cause of this behave.
I have update with liveupdate 5 the Controlcenter to 2.5.056 but ClickBIOSII is not anymore available and I can find anymore on utility MSI download any hint?
Thank you
Windows 7 Pro 64Bit
Board MSI Z68-GD80 B3 Socket 1155 MS-7672
Bios H.50 V17.5 Build date 20120111
VGA EVGA 670 GTX
VGA BIOS Version 80.04.4B.00.70 Ge Force 310.70
PSU Cooler Silent ProM 850W Single +12 rail 66A
Intel I7 2600K 3.40Ghz socket 1155 8mb Cache
Cooler cpu SCYTHE MUGEN 2
MEM Kit Dual Channel G.SKILL RipjawsX DDR3 8GB (2x4)1600 Mhz Memoria Ram CL9 [F3-12800CL9D-8GBXL] CL9-9-9-24 1.5V
2 HDD SSD OCZ Agility 3 2,5" 240GB/120GB
PCI card HighPoint RocketRaid 230
1 SSD Mushkin Disk MKN SSDCR240GB WORK
1 SSD OCVertex DiskOCZ-AGILITY3 GAME
1 Sata Cotroller RocketRaid WITH 3*HDD Wester Digital Raptor 150 for storage
Hardware attached USB
Saiteck yoke
Saiteck throttle
Saiteck rudder
TrackiR V4
Logitech wireless headphone
Logiteck wirless keybord
Monitor CrossOver 27
Monitor HP W2007

Hi
I have two SSD each one have a system for boot one I use for everyday work and another one for gaming.
I set on boot the SSD for work as default for boot, it works for several days and then end up to boot from the second one.
It's very difficult to press F11 to get boot option but if I menage I can boot with no problem from it.
So I ask to my retailer and they told me that maybe SMART Tech. check the ssd and if find something wrong it boot form the second option.
I check my everyday work SSD with CHDISK and HDtune but there is no problem or error.
I am lost to find the cause of this behave.
I have update with liveupdate 5 the Controlcenter to 2.5.056 but ClickBIOSII is not anymore available and I can find anymore on utility MSI download any hint?
Thank you
Windows 7 Pro 64Bit
Board MSI Z68-GD80 B3 Socket 1155 MS-7672
Bios H.50 V17.5 Build date 20120111
VGA EVGA 670 GTX
VGA BIOS Version 80.04.4B.00.70 Ge Force 310.70
PSU Cooler Silent ProM 850W Single +12 rail 66A
Intel I7 2600K 3.40Ghz socket 1155 8mb Cache
Cooler cpu SCYTHE MUGEN 2
MEM Kit Dual Channel G.SKILL RipjawsX DDR3 8GB (2x4)1600 Mhz Memoria Ram CL9 [F3-12800CL9D-8GBXL] CL9-9-9-24 1.5V
2 HDD SSD OCZ Agility 3 2,5" 240GB/120GB
PCI card HighPoint RocketRaid 230
1 SSD Mushkin Disk MKN SSDCR240GB WORK
1 SSD OCVertex DiskOCZ-AGILITY3 GAME
1 Sata Cotroller RocketRaid WITH 3*HDD Wester Digital Raptor 150 for storage
Hardware attached USB
Saiteck yoke
Saiteck throttle
Saiteck rudder
TrackiR V4
Logitech wireless headphone
Logiteck wirless keybord
Monitor CrossOver 27
Monitor HP W2007

I can't boot with usb in windows 7 for setup win8.1

please help me very fast...I have a iso file of win8.1 that i copied it in my usb disk.and i set the priority of boot in usb.but when i power on and select boot menu and then select usb...the windows 7 start normally.(my laptop:G500).what's the problem?

Hi,
How did you prep your flash drive? If you're booting in legacy (not UEFI) mode, it should be NTFS (for Win 7 anyway, haven't tested Win 8) with the active flag set. If you're booting in UEFI mode it should be FAT32.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

E9280t can't boot with USB 3.0 cards (multiple vendors tried) New e9280t BIOS version needed

Hello...
I purchased a new e9280t last year from the HP Website complete with 9 gb memory (now 16), Blu-ray/DVD writer & reader, Hauppauge Digital TV tuner, ATI Radeon 4850 Dual Monitor video card, etc... SInce then I've added more memory and a 3 port Firewire 400/800 card. Its running Win 7 Pro (sp1) and the BIOS is v5.29.
I purchased a external USB 3.0 WD drive (3 TB) and a StarTech USB 3.0 card (Amazon.com). After installing the USB 3.0 card, the system would power on for one second and die and then do it again a couple seconds later and the cycle continued until the power cord was pulled. I then pulled the USB 2.0 card and tried again only to have the same results. The only cards that remained in the system during the testing was the ATI card and the Hauppuage TV Card.
Thinking the problem was with the USB 3.0 card, I purchased another vendor's (Rocketfish from BestBuy) and installed it. The same problem as with the other USB 3.0 card, the system won't start.
No driver software or any other changes were made to the system before installation attempts (per vendor's installation instructions).
Since the failures all occur during the initial power up sequence and that the cards were tried with and without having power connected to them, that the problem is only correctable with a BIOS upgrade for the TRUCKEE motherboard. I could be wrong but I'm going on 30 years of hardware experience as my framework for that opinion.
If anyone else has this same problem, It would be good to rally around and see if HP notices us.
Thanks,
Norm
This question was solved.
View Solution.

Greetings,
I have tried multiple vendors and have yet to find a USB 3 card that will allow the computer to boot (for more than a 1/10th of a second).
I've tried removing every card in the system except the the display card and no go. Two of the cards removed had power connectors to them and the third did not. So even after removing those cards along with disconnecting one of the two internal hard drives, I'm certain its not a power issue. As to what it might be, I don't know.
If anyone else has been able to get a USB 3 card to work in that system, I'd love to hear from you.
Thanks,
Norm
SYSTEM INFORMATION AS OF 20110315
PRODUCT:                        HP Pavilion E9280T
PRODUCT #:                     AW020AV-ABA
MOTHERBOARD:           PEGATRON        (HP Name: TRUCKEE 1.04E01) 64 Bit
BIOS VENDOR:             American Megatrends Inc.
BIOS:                                   5.29
BIOS RELEASE DATE:    09/17/2010
CPU:                                    Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz
MEMORY:                            16 GB
VIDEO:                                 ATI Radeon HD 4850
VIDEO DRIVER:                 8.821.0.0, 1-26-2011
SOUND CARD:                  Realtek High Definition Audio
SOUND DRIVER:              6.0.1.6196, 9-7-2010
HD SOUND DRIVER:       ATI High Definition Audio Device
HD DRIVER VERSION:    5.0.7000.9, 9-18-2009
OS:                                       Windows 7 Pro (SP 1)
VIDEO CAPTURE:             * Hauppauge WinTV HVR-1800 (Model 78xxx, Combo ATSC/QAM)
CAPTURE DRIVER:          1.47.28239.0
FIREWIRE CARD              * 400/800 Powered Card (2 800 & 1 400 ports)
USB 2.0 CARD                  * 5 USB 2.0 ports
* It should be noted that during the testing of the USB 3 cards, this device was removed prior to the testing.

W701 Won't boot with USB dongle attached

W701 with current BIOS (6KET46WW v1.12) will hang if there is a USB dongle for a Microsoft Explorer Mouse USB dongle in the upper left USB (2.0) socket on boot. Works fine if you put the USB dongle in the lower USB/eSata socket. Note that the upper socket on this 2541-W1Z is NOT a USB 3.0 port (silver, not blue). Course I don't want to put it in that socket since I like to use that for eSata... Apparently the same problem exists in the W5XX laptops as well, but I don't see a post discussing the issue on the W701.

Have you seen the thread
Hangs on boot with Logitech wireless keyboard
Yours may be a similar problem.
I'm about to get a W701 in a day or 2 and will be in the same situation. I'll check it out and report back when I can.
ThinkPad W701 25002LG, i7 2Ghz,FX 3800M, 4Gb,16GB, SSD 320GB, DVDRW, RGB WUXGA, Wacom, Col Sensor, Fingerprint reader, Mini Dock

Distortion with USB mic and Logic Pro/Garage Band

I have read a ton of posts, but I have yet to find an answer to this question. I have a USB mic that used to work wonderfully before upgrading to Leopard. When I make a recording now, it usually works well for about 5 minutes, and then out of nowhere I get horrible distortion. I have read that if I changed the frequency from 48000Hz to 44000Hz it would correct the problem. It seemed to work, but the problem keeps coming back. If I switch the microphone profile from built-in mic back to USB Mic in Preferences>Audio, it corrects the problem for a little while. It happens in Logic, Garageband and any other program that I try to record to.
I read in a Leopard update note that one of the past few upgrades was supposed to fix this issue, but it hasn't been fixed for me. Does anybody know of any solution to this problem? I would be greatly indebted to you!

Nope. The larger buffer didn't work. What did work was running a cord out of the 1/4-inch jack from the direct box to a 1/4-to-1/8-inch adapter and then into the mic/line-in jack on my computer. I set GarageBand to use the built-in line-in and had no static problems. It's a stopgap until this gets fixed.
A post by LinuxMercedes on Oct. 3 at http://discussions.apple.com/message.jspa?messageID=8158914 may provide a solution.

Observation made with USB mics and Audition CC on OSX and Windows

Hi all,
I have Audition CC installed on both my desktop (running Windows 7 pro x64) and my Macbook air (OSX Mavericks).
I noticed that when I use my USB microphone (Audio Technica AT2020) on the desktop, with latency set as low as possible, there is still a slight bit of lag when monitoring.
On the other hand, when I use the USB microphone with the Macbook Air, with i/o buffering at 32 samples [and sometimes higher], I get what seems like zero lag when monitoring.
Does this have to do with hardware or drivers differences between both machines?
Thanks!

Yeah.
One of the big drawbacks with most USB microphones is that most don't provide any monitoring--they rely on you using whatever is built into your computer. (There are a few USB mics that do include monitoring but they're fairly rare.)
In most cases, this'll just be whatever sound card is installed in the computer--and the standard ones on most PCs are a 65 cent chip designed for the simplest of playback duties and Skype calls, not recording. This would mean that the only way to monitor is for your signal to do a round trip via the computer which inevitably introduces some latency even with very low buffer settings.
Once you get to more specialist audio interfaces (even fairly basic ones) they have a feature called "direct hardware monitoring" which lets you create a monitor mix in the interface itself before the signal even goes into the computer. I'm not a Mac user but I have to assume that the audio hardware in your Apple provides some form of direct monitoring without the "round trip".

Notebook won't boot with usb device plugged

Hi,
Voila, I have a Satellite Pro Sp6100, when i try to boot it whith an usb printer plugged in, the notebook won't start at all. i have latest bios version 1.90.
Thx,
Barzot @+

Hello
It will be interesting to know if the printer is ON or OFF when you start the unit. I have tested my Tecra M1 with USB stick and the boot up procedure needs about 5 min. If I put the USB stick out the unit starts as usual.

How to record an audio clip in Premiere Pro cc with USB mic on PC

Hey All,
Having trouble finding a solution on the web. I have just made the switch to Premiere Pro CC from Final Cut Pro 7, and also from Mac to PC, yikes I know. I am looking to record some audio clips directly into PP with my USB mic. I have successfully hooked up my usb mic through the PC control panel. My ignorance will be apparent here, What should I do next in Premiere Pro to begin recording my clips?

https://helpx.adobe.com/premiere-pro/using/recording-audio.html
NEW! Voice Over record feature in Premiere Pro CC 2014 - YouTube

T440p exactly once per two power ups cannot boot with USB mouse receiver insterted.

With inserted nano Logitech mouse receiver my Lenovo cannot boot once per two power ups.
Let say that I power off laptop. Power on, it just powers down itself after 3-4 seconds. I power up it again and everything is OK. It allways behave the same way: NOTOK >> OK.

engywook wrote:Erm, I dunno, I'd guess input-mouse. I have no idea what evdev is.
evdev is a generic input driver (you can use it for both your mouse and keyboard). If you do not know what the evdev driver is, you most likely are using the xf86-input-mouse driver.
To be sure you can use a
pacman -Q | grep xf86-input
from the command line and see which one comes up. Try switching to the other (you need to install it first of course). This gentoo wiki page may help you a bit how to configure your xorg.conf for an evdev driver: http://gentoo-wiki.com/HOWTO_Advanced_M … d_USB_Mice (note that you do not need most parts that are written there)
Does this solve your problem? If not, try using the vesa video driver temporarily to see if the problem is with your video card driver.
engywook wrote:Do I need to do something with pacman to get all the packages at the mirror? all I've really done so far is pacman -Sy or -Su whatever updates it.
No normally that should work. You don't get any results when doing
pacman -Ss pidgin
If so try to use another mirror and see if that helps.

MSi Dragon Editon 2 problems booting with usb mice

Similar Messages

Maybe you are looking for