MSI Drivers and Utilities DVD won't work

Hello, I've just purchased the parts to construct an entirely new computer, and I've chosen MSI Z77A-G41 motherboard. I put everything together, and I loaded Win XP on, and my plan is to upgrade to Win 8 during their special offer. I needed to go into Setup and change the SATA mode from AHCI to IDE, so that I could install XP. Once I had XP up and running, I inserted the MSI Drivers and Utilities DVD to load all of the drivers. However, when I put the disc in, it auto-runs, the driver/utility screen is shown 'blacked out' and I immediately receive a Windows error message: "DVD Setup Application" error. I went in through Windows Explorer to the programs on the DVD, and found DVD setup. By trying to run this from within Explorer, it takes me to the same error as when I auto-run.
The only thing I can think of is that I need to change something else in Setup, to run Win XP because it's so old? I'm pretty sure that there's nothing wrong with the new DVD burner, because I've used it to install XP, and also to extract and install Service Pack 2 and 3 (which I downloaded on another computer and transferred on a CD). If I knew exactly what needed to be installed from the MSI DVD, I could try doing it from within Windows Explorer. But, I'd still like to figure out what the Setup Application error message is telling me.
Any helpful suggestions will be appreciated.
Thanks!

A further note before I head off to bed. I was able to install Win XP service packs 2 and 3 using my new burner, and I've activated with Microsoft and downloaded and installed 117 updates. I have now used this same DVD burner that won't recognize or work with the MSI driver/utilities DVD, to install all of the drivers for my video card---that DVD auto-ran just fine. So, after doing some searches on Google about the "DVD Setup Application" error, not a lot of help but most people say that if another DVD will spin up and load things OK---it must be the fault of the DVD that won't load. In other words, I don't think that there's a problem with anything in the Setup on the motherboard.
So, if anyone has any further ideas, please let me know. Otherwise, I'm going to contact MSI tomorrow and see about a replacement DVD. Thanks.

Similar Messages

TS3212 when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

ScanJet 8270 ISIS/TWAIN Drivers and Utilities cannot be installed on Windows 8.1 64Bit

Hello, I've tried to install all the drivers for my ScanJet 8270 on a Windows 8.1 64Bit System. The standard twain and wia drivers installation worked perfect, but when trying to install the "ISIS/TWAIN Drivers and Utilities" the setup hangs (I'm using version 3.0 from 20 Aug 2014 which is currently the latest one). The setup starts, shows a progess bar while extracting the files, but after that nothing happens. After a while I've took a look into Windows task manager and saw, that the process is still running, but doing nothing (no CPU or other resource usage). On Windows 7 everything worked fine, but not on Windows 8. Although the scanner is advertised to work under Windows 8 and this driver is also listed on the driver downlaod page for Windows 8 it's not possible to get it installed on Windows 8. Is HP not testing the setups before shipping them? What can I do to get this driver to run on my PC? Is anyone out there having the same problems and solved them already? Thanks for your advices Sven

Hello, Thank you for posting your query This looks like there is no action from the software setup after a while on Windows-8. Please try the following steps 1. Open the run prompt in your computer and type "msconfig"2. In the system configuration utility, select the "services" tab3. Check the option " Hide all microsoft services"4. All the Programs, other than Microsoft Windows services would be listed now5. Locate any conflicting programs and uncheck them in the window6. Restart the computer and try to run the installation again Please Note: keep a record of the programs you are unchecking as after the installation you may need to check them back in the same screen Do not uncheck any Microsoft service from the list as it may be critical for your computer's function. If doubtful. Please contact us through chat or phone for further assistance. To contact us through chat: http://www8.hp.com/us/en/contact-hp/chat.html Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted SolutionI work for HP .

Got a MacBook with 10.5.8 I am anable to burn cds, dvds, and dl dvds. Everything worked before I reformatted my computer but now it comes up with error messages like unable to communicate or something about the laser power levels. Help! Anyway to check

Got a MacBook with 10.5.8 I am anable to burn cds, dvds, and dl dvds. Everything worked before I reformatted my computer but now it comes up with error messages like unable to communicate or something about the laser power levels. Help! Anyway to check to see what is going on?

Hi I am having the identical problem with my 24" intel iMac 2007..... Did you ever figure out what the problem was? I'm on round 3 now and with a completely blank grey screen and it won't start up from the disk 1.. I also have diskwarrior and techtool pro as well as the osx leopard and snow leopard disk... The HD is new.. Replaced by apple 3 months ago.. Don't know the cause the first time this happened about 9 months ago.. 2nd time, 6 months ago it never rebooted from the office for mac 2008 critical update... Did a clean install after backing up to TC... Took it to apple replaced HD even though it appeared ok, they checked all hardware and I ran techtool pro daily ever since. Last week software update had several updates avail. Office for mac being one of them.. I updated and have never booted since.. . I swear to never ever use another Microsoft product as long as I live if I can just fix this once more... Help me please

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue.

My game center won't load and shows up blank when I try to open it. I've already tried to close all the apps and restart it and it still won't work. Is their anyway to fix it without restoring it??

My game center won't load and shows up blank when I try to open it. I've already closed all of my apps and restarted it and it still won't work. Is their anyway to fix it without restoring it and starting over??

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- sign out and the sign back into Game Center
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

My microsoft word and excel programs won't work and files won't open.

After an automatic HP update, my Microsoft Word and Excel programs won't work and my files won't open. What caused this and what can I do to fix the problem without losing my files? I have files that are part of my work and I HAVE to have them ASAP. Please help.
Thanks in advance.

Hi
Please find the steps to resolve your issue.
Open Installed Updates by clicking the Start button , clicking Control Panel, clicking Programs, and then, under Programs and Features, clicking View installed updates.
Click the update that you want to remove, and then click Uninstall. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Or Try this step
If this does not resolve your issue then you can try a System restore to the date where unit was working fine steps provided below for you.
Start in search box type System Restore then click on it then select the Date where unit was working fine.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I tried to update my 4s and now it won't work. Is there anything I can do? It's only 6 months old..

I tried to update my 4s and now it won't work. Is there anything I can do? It's only 6 months old..

Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.

My computer won't let me run the setup.exe file. I am an admin I've run as admin and I've downloaded many times. I just reformatted my computer and now it won't work.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
 Cheers, Tom

I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please?

I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod?

HT201210 I tried to update my iphone and now it won't work at all

I tried to update my iphone and now it won't work at all

Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

I clicked update for facebook And now my iPod touch 4th gen won't let me download the Facebook app I've turned it on and off like 5 times and it still won't work can you please help me

I clicked update for facebook And now my iPod touch 4th gen won't let me download the Facebook app I've turned it on and off like 5 times and it still won't work can you please help me

Seems to be an Apple or FB app problem. Nothing you can do but wait for it to be fixed.

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and it still won't open. Says the itunes library won't work with the older program. Help

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and reinstalled a older version and it still won't open. Says the itunes
library won't work with the older program. Please help

It says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

I have Stickies 6.0, I upgraded to 10.6.8 and now it won't work, is there any way to recover my old Stickies info?

I have Stickies 6.0, I upgraded to 10.6.8 and now it won't work, is there any way to recover my old Stickies info?

Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

MSI Drivers and Utilities DVD won't work

Similar Messages

Maybe you are looking for