MSI Dual-Net Card and Communications Slot

Hey all,
ok, i want the MSI Dual-Net Card...i have HEARD that you need the MSI Communications Slot for it to work...is that true???
because there is absolutly NO MENTION of this on either the website or even in the manual for the card...
the manual even shows a picture of the card being installed into a NORMAL PCI slot...

Quote from: Klodrik on 24-August-05, 02:28:28
Do u have IVT corp. BlueSoleil prog.? On my cpu, when i start Bluesoleil, it says "please insert a bluetooth device", but when i push the orange ball in the middle, i says " Invalid operation", and most of the menus are grey, like Tools, My services and My bluetooth. I cant even use "Find device". I'm trying to connect to a cellphone which has bluetooth ( Ericsson k700i ).
yep, thats wat i have...and its the BEST Bluetooth software i've used...we have 3 Bluetooth USB Dongles in my house, and the software for them all (compared to this) is...well, just crap...
did u plug in the USB header??? for the bluetooth to work, it has to be connected to a USB header on the motherboard...
and i assume you've checked device manager to make sure the driver is installed...if not, do it...
BTW, i know wat was wrong with my Wireless Network...i had the Wireless Antenna and Bluetooth Antenna plugged into the wrong places now my wireless has full strength!

Similar Messages

I have a PC DVR Net card and having a hard time connecti...

I have a PC DVR Net card and having a hard time connecting to the media server from my friends computer.I have read everything I can about port forwarding and I believe everything is right but I can't connect to my Web Cam server from another location. I do have it working on my Lan but when I go to a friends computer I can download the Web Cam fine but when I try to start the server it say's can't connect.My router is a WRT54G Version 3. I forward the Ports to the ports I was suppose to and I even made the computer a static Ip on it and everything seem's to work but I can't get into the server from another PC outside of my connection. My windows XP firewall is turned off and I even turned off the firewall on the router but still no luck. I hooked my connection up right to the computer bypassing the router and I was able to connect to my camera server from my friends computer with no problem so I know it's the router itself causing the problem..I used this one program to check and see if the ports were open and it said they were so I'm lost at this point. Any suggestions I would appreciate it very much.
Thank's

Reset the router for few seconds ...
Disable all the firewall on the computer ...
Check the IOp ... if getting Ip - 192.168.1.X .... try to ping the Ip .... If getting replies ... try going online
If not gettting Ip -- assign static Ip ... repeat the step ...
Still no luck ..possible the router is gone bad ....

MSI TV tuner card and HDTV

I decided for grins to connect my Pioneer Voyager HDTV box from Timewarner Cable TV (AOL) into my MSI TV tuner card to see what kinda picture I would recieve. Well, first I should say I am only allowed to use S-video and not the HDTV component cables (3), but it works. Timewarner at this time only offers 10 HDTV channels and rest or either digital (DVD quality) or analog. Some of the HDTV channels do not completely fill the screen and I have to adjust my screen to fit, but this is not to much effort. Some HDTV channels fit the screen but are in wide screen only and not full screen, but this was still pretty cool. I watched some of the wimbleton tennis in HDTV on my computer (awesome picture quality)
I am guessing that when HDTV becomes more popular and prices drop, that perhaps MSI might consider building a TV tuner card with HDTV outputs??

I have been seeing some amazing video using my msi TV-Tuner card (older card) and HDTV S-video inputs from my digital HDTV cable box. I understand what SteveK is saying about how S-video is not capable of displaying 1080i, but dang it looks awesome using dscaler. I did some searching and this guys says:
A better solution is S-video. Almost all players have s-video output. S-video looks much better than composite video, and only slightly inferior to component video. Hook an s-video cable from the player to the display (or to an A/V receiver that can switch s-video). The round, 4-pin connectors may be labelled Y/C, s-video, or S-VHS.
Link found here: http://www.home-theater-faq.com/whats_the_difference_between_composite_s-video_component_and_rgb_video.htm
Anyway I found some similar links that said about the same. In any case, if anyone wants to play with the HDTV viewing using dscaler and an HDTV s-video connection, it might be of interest.

Dual graphics cards and single 4K display - Mac Pro (late 2013)

I'm considering a new Mac Pro as my next graphics/development workstation. I see that the new Mac Pros have dual graphics cards (i.e. dual D300, D500, D700.) I was wondering if there is any benefit to having the second graphics card if I only have only one 4K display connected via Display Port 1.2? Would the two cards work in tandem to output to the single 4k display? Can the second GPU still be used for OpenCL, even if it is not connected to a display?
Thanks

There is no option to have only one Dxxx, and yes some apps do and no the number of displays does not affect video output.
Whether it is right for you vs say a maxed out iMac or something else is something you should continue to research and consider.
www.barefeats.com and www.macperformanceguide.com as well as other forums and sites.

Dual video cards and PS4

Hi I was wondering if anybody else is having this problem.
I am running a mac pro with dual video cards (8800 and 2600) and I cant select opengl in photoshop cs4. if i disconnect one of the cards it works.
Is it not possible to use dual cards with PS4
Any help?
David

well, I have two graphic cards of the same kind but with Photoshop CS4 open, I can only view the images on the first monitor: if I put the image on the 2nd display it shows a black window :-((( maybe a bug of the software?!?

MOVED: Bluetooth driver and software - Dual Net Card (Vista)

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=105162.0

On Toshiba support and download page you can download Toshiba BT stack but it is for usage with Toshiba notebooks.
You bought non-Toshiba product so for download contact Nexus or visit Nexus support page.

MSI 4670 Video Card and NVIDIA/ATI drivers on K8NGM2-FID

I installed an MSI R4670-2D512 video card yesterday and had a problem with drivers that I'd like to understand better. What I did was uninstall all the NVIDIA drivers, install the board, install the ATI drivers, and update the ATI drivers (with reboots). In the end, I had no LAN connection, and XP's hardware warnings (and Device Manager) showed no "Other PCI Bridge," "SM Bus Control," and "Video Controller." Reinstalling drivers from the motherboard's CD got all those going again, but I'm wondering if that's created any underlying NVIDIA/ATI conflicts. I've disabled GeForce 6150 under Display Adapters, leaving the 4670. That covers the video controller, but should I do the same for the other two? And should I have even needed any of the three? Thanks.

Quote from: BOSSKILLER on 22-November-08, 03:56:04
"I've disabled GeForce 6150 under Display Adapters, leaving the 4670. That covers the video controller, but should I do the same for the other two? And should I have even needed any of the three? Thanks."[/i]
Show us what you mean.
Actually, I misspoke: video controller and Display Adapters were in different categories. What do you want to see? Under Display Adapters, both the ATI 4670 and GeForce 6150 are listed. I disabled the latter (right click, disable), so there's a red X through it now. The three yellow '?' that were under Device Mgr > "Other Devices" are no longer there. They were listed at the time under "Other Devices," but once those motherboard CD's drivers were reloaded they dispersed to other locations with new names and the Other Devices category disappeared. I'm guessing one of those three is now called the "NVidia NForce Networking Controller," since when the problem arose there was only a "1394 Net Adapter" under Network Adapters. I couldn't find the other two, hence I wouldn't know what to show you.

PC cards and PC slot - Help?

I see that my PowerBook has a PC slot, but what kinds of cards go in there? What are the options? Where can I browse the choices?
I have a PowerBook G4 running the latest and greatest system.
Thanks in advance!

This being a forum for questions about the PowerMac G5s, you're not likely to get a quick and accurate response. I'd suggest you ask in the applicable PowerBook forum.
Regards.

Where to purchase Dual Net card?

I bought an MSI K8N Platinum a couple of months ago and am now interestd in buying the MSI wireless card. Can you only get it in the bundle or can i get it some other way?
Thanks

You can get it in the Uk here http://www.refreshcomputers.com/default.asp?txtAction=emailproduct&txtId=6375

LaCie FW-800 Card and slower slots

Greetings!
I have a late model 2005 G5 and want to install a LaCie FW-800 card. Given that the fastest slot is in use by the graphics card, will any of the remaining slots impede or otherwise degrade the 800Mbps rate?
Information on the card is located here:
http://www.lacie.com/us/products/product.htm?pid=11574
Thanks!

Even 1x PCIe is faster than FW800's 800 mbit bandwidth.

Dual video cards and render speed

Will two video cards render Motion content faster than a single card? More specifically, will dual cards help when the Motion files are used directly in FCP? Using Motion 2.1.2 and FCP 5.1.4

It depends on the graphics card driver. In the past, some cards, because of the way the driver was written, would divide available VRAM between two monitors. Over time though, drivers have gotten better, and this limitation is fading away. Even though, being that your graphics card has to render both the GUI for your OS (which is now loaded with effects as well) and Motion, keeping your screen real estate reasonable will allow your card to devote more resources to your project. Every pixel has to be rendered somewhere, whether its your project or the twenty translucent widgets you have loaded into your dashboard.
You won't see a "boost" by adding more VRAM, any more that you will see one by adding more system RAM. An increase in RAM equates to greater calculation space within which to work. For Motion this will show up as the ability to process more layers and real-time effects before a RAM preview is needed.
JM

Dual-Net Bluetooth+802.11G PCI Card PC54GBT

Just checking to see if anybody knows when this K8N Neo accessory will be released??
It's designed to use the orange PCI slot on the K8N Neo and provide both Bluetooth and WiFi access points with only 1 antenna and 1 slot....
Here is the only pic I could find on the Net.

Sorry I was a little slow posting the results, but the shop phil86 directed me to was prompt, and sent me back a response the next day. Sounds like a good place to deal with, however they don't sell the card by itself and shipping to the US is expensive. Has anyone found a source that sells just the dual-net card?
As promised, here is the response Gladiator Computers sent back to me ...
Unfortunately at this time this product is not sold on its own, only as a bundle with the board. I have checked this previously with MSI.
The cost of shipping to USA for the board and card is £40.00
We are unable to accept payment via any type of card, only via cleared funds, a bank transfer for the full amount in GBP Sterling.
If you have any further questions please let us know.
http://www.gladiatorcomputers.com

Where is my Dual-Net pci card ????

hi,
i've just bought my K8n SLI Diamond..and surprise no dual-net card in the bundle !!
i've checked with the store and all their stock is without the pci-card !!!
So if someone has any idea on that matter and where 'am suppose to find answers ?!!!
am very disapointed by MSi who doesn't seem communicate about that missing !

Quote
Originally posted by ionic
thx fasteddie but have u see the ridiculous picture in that link it's a FAKE !!
the serial number under the bar code has been badly erased !!!
i live in FRANCE and there is no second bundle, then do u think 249 euro is a price for a cheaper bundle ???
and finaly, everywhere on the mobo'box it mention :"plus MSI dual-card"
my english is good enough to underdand this !!!
in FRENCH we call that :"DU VOL !!!"
and if MSI doesn't have more than fake pictures, it's gonna hit the fan !!!!!
i can't believe it !
Fake pictures. Take a look here---> Dual Net Card

Dual ADC displays and a vid card w/ no ADC ?

Hi.
I've got a PowerMac G4 with an ATI Radeon 9800 Pro vid. card. I bought it when I purchased my 17" Apple display not knowing that the Apple display had its own connector that required me to but a $99 adaptor that also requires a power cord!
Anyway, my old CRT (that acted as my 2nd display on the G4) finally died. I purchased a nice 15" Apple display, but apparently forgot to consider the ADC connection.
I need a cheap, fast solution.
I've got a G4 with the 9800 Radeon which has a DVI and VGA connection.
By the way, does having 128MB DDR of video ram help with rendering time??
Ok, back to the original question.
I also have the original video card that came with the PowerMac G4 1.2mhz Quicksilver. I believe it's an 9000 Radeon. It's got an ADC and VGA connection.
How can I setup a dual display on the G4 with the two Apple displays? Both are ADC and neither card has (2) ADC connections.
I've got two ADC to DVI convertors and I have the VGA to DVI convertor that came with my 17" apple display, but the DVI end doesnt match the DVI end on the 2nd ADC to DVI convertor.
Any suggestions? Is there a dual ADC video card?

Hi
As far as I'm aware, the Radeon 9000 that came as the stock graphics card in certain PowerMacs had an ADC connector and a DVI connector. It also came with a DVI to VGA adapter. If this is the case you should be able to attach one monitor directly to the ADC connector and the other to the DVI connector using the $99 DVI to ADC adapter. You'd be losing the benefit of the Radeon 9800 though.
Unfortunately there aren't any graphics cards with dual ADC connectors, as the card (and AGP slot) would have to provide enough juice to power two monitors. The options seem to be:
1. One AGP card with an ADC connector and DVI connector, which would require one DVI to ADC adapter, such as the Radeon 9000.
2. One AGP card with two DVI connectors, which would require two DVI to ADC adapters, such as the Radeon 9600 retail version. Mines worked perfectly, although there do seem to be problems with it in certain Quicksilvers and Digital Audio G4s.
3. One AGP card with a DVI connector, which would require a DVI to ADC adapter, such as your existing Radeon 9800 and one PCI card with a DVI connector, which would also require a DVI to ADC adapter, such as the Radeon 9200. An AGP card with an ADC connector would also work but seems pointless given you've already got the 9800 and adapter.
Unfortunately I'm not sure there is a really cheap solution. As already mentioned, there are VGA to DVI converter boxes on the market, but they're incredibly expensive and you'd be converting from digital to analogue and back to digital, with some loss of quality.

Orange pci slot (communication slot) questions?

i have a msi k8n neo platinum rev.1 motherboard that has a orange pci slot (states in manual that this slot was designed for msi pci wifi cards). i just purchased the msi dual net pci card (red pcb board not the green pcb board one - if there is a difference?) and used that orange slot (pci slot 5) and all is well (device recognized by windows, driver/software installed fine, etc....). problem is, when i shutdown pc, my cdburner activity light and hard drive activity light stays on with pc shutdown. when pc is running and such, the lights turn on as usuall. this only happens when the pc is off. is this normal?
i put the card in pci slot 4 and this issue didnt happen. so card isnt bad or anything. confused on why putting this card in pci slot that was intended for causes some sort of activity light short.

Could be some wake up LAN thing on the orage slot. Computer in ready mode or something???
I use a wifi card in the orage slot in mine , but it's not the dual one

MSI Dual-Net Card and Communications Slot

Similar Messages

Maybe you are looking for