MSI E350IA-E45 Wake On USB does not work

I spent hours trying to get the computer to be able to wake from my usb devices. I enabled it in the bios and in the Windows 7 device manager. However, it doesn't work. The motherboard cuts off power to the USB when in S3 sleep mode. Has anybody been able to get Wake From USB working on this board or is it false advertisement?

Mine works with a USB mouse but not Bluetooth mouse.... My BT also has issues on cold start, until I jumped the 5volt pin to the 5v stand by on the power supply 

Similar Messages

  • MSI GX620 Firmware 1651 1433 link does not work

    Hi. am trying to overclock my CPU using SetFSB, but everytime I try to oc just the slightest bit, it my laptop freezes.  Even when I try to use Turbo feature on notebook it just freezes too! I have bios version 1.14. MSI Live up says that all my drivers are up to date, however, when  I updated the bios I did not update the EC firmware. For some reason, on  the MSI website for GX620, the download link for the this does not work. Can anyone email me the link or something, or tell me what I'm doing wrong. Thanks. Sorry if I posted this in the wrong thread.
    Win 7 32
    Intel Core 2 Duo 2.20 GHz
    4gig ram

    you can ask msi about non working link: http://support.msi.com/

  • TS2756 i downloaded the new itunes and now my hotspot via usb does not work on my macbook. (it was before) i have an iphone 5s.

    usb hotspot not working with new itunes. i have an iphone 5s. wifi hotspot still works but the macbook says in system preferances under iphone that its not connected or not responding. really annoying

    Why not?  What happens when trying to use it?
    "Will not work" is useless when asking for help.  Without specifics, no assistance can be provided.

  • MSI E350IA-E45 Wake on Lan

    Hello,
    A few day's ago I ordered the E350IA-E45 to build into a HTPC, but the day after I read a post where someone said that
    this board does not support Wake on Lan. So I decided to go searching for confirmation, but I can't seem to find an answer. I've already
    searched the manual, but it doesn't say anything about Wake on Lan.
    I'm hoping someone here can confirm that it does, or does not support Wake on Lan.
    Willie

    Thanks for pointing me in the right direction!
    It has a Realtek RTL8111E lan controller, which does support WOL.
    Willie

  • Usb does not work

    nothing plugged into USB ports is recognized - only things appearing under USB are Bluetooth USB Host Controller and IR Receiver
    external drive, camera, and phone are not recognized when plugged in (although phone receives power)
    any suggestions?
    Thanks!
    OS X 10.5.8, 2 GHz, 2 GB RAM

    Everything is checked except connected servers.
    Turns out I had the mistaken impression that anything plugged into USB would show up immediately in the system profiler list, and I see now that it doesn't. Now that I look into it more it seems that the problem may just be in the Lacie USB hard drive I'm trying to connect.
    Having said all that, an ipod which is plugged in does connect to itunes, but doesn't show up on the desktop, even though that option is checked.
    Thanks again.

  • [solved] usb does not work...

    Whenever I plug in a usb-device, it always say:
    Cannot mount volume.
    Error org.freedesktop.DBus.Error.AccessDenied.
    A security policy in place prevents this sender from sending this message to
    this recipient, see message bus configuration file(rejected message had
    interface "org.freedesktop.Hal.Device.Volume" member "Mount" error name "(unset)"
    destination "org.freedesktop.Hal")
    No idea of what it is saying....
    by the way, hotplugging is already enabled and the usb device works well in Windows.
    Last edited by horsecool (2009-01-21 10:00:28)

    Make /etc/PolicyKit.conf look like this and try again:
    <?xml version="1.0" encoding="UTF-8"?> <!-- -*- XML -*- -->
    <!DOCTYPE pkconfig PUBLIC "-//freedesktop//DTD PolicyKit Configuration 1.0//EN"
    "http://hal.freedesktop.org/releases/PolicyKit/1.0/config.dtd">
    <!-- See the manual page PolicyKit.conf(5) for file format -->
    <config version="0.1">
    <match action="org.freedesktop.hal.storage.mount-removable">
    <return result="yes"/>
    </match>
    </config>

  • 890GXM-G65 WOL Wake-on-LAN does not work

    I am unable to get the wake-on-LAN to work for this motherboard. Can anyone help?
    MB powermgmt is BIOS.
    I have enabled at the Win7 network driver-powermgmt the ability to wake the computer.
    Win7 x64
    AMD X2-255
    4Gb
    Any help appreciated.

    Quote from: Bas on 02-March-11, 00:51:56
    No, you can't turn the nic off!! How are you going to wake it when it's turned off?
    Unfortunately if "Allow computer to turn off this device to save power" is unchecked,
    then "Allow this device to wake the computer" will be greyed out.
    I have another PC that WOL works (DELL) and it has all 3 mentioned checked!!!!!
    I dont think "Allow computer to turn off this device to save power" means turn off the NIC!!! I think it means enable power management. Maybe a real expert can chime in here.
    Hmm....what do I do next????

  • Dvd player external does not work

    Two weeks ago I bought a HP Stream 11" with no CD/DVD drive; when connecting an external CD/DVD drive via USB does not work and appear a window that says a file is missing; I am kindly asking for your help regarding what has to be done in order to make it work.  Please note that the External DVD/CD drive worrks perfect on others Laptops I own
    THank you

    HI @agalford03 ,
    Welcome to the HP Forums!
    It is a great place to find answers and tips!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that you have purchased the HP Stream 11 which does not come with an internal  CD/DVD and when you connected an external one, you received a message that it was missing a file.
    Have you done all your Windows updates?
    Have you done a manual check for Windows updates?
    Have you ran the HP Support Assistant to check for HP updates?
    What file does it say you are missing?
    When it is connected, if you check Device Manager does it supply any additional information?
    Have you ran the Windows troubleshooter?
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • V570 - USB Ports Not Working

    Please forgive me if I posted this in the wrong section! First thread!
    Recently, three out of four of my USB ports decided to stop working. The one USB port that works is a USB 2.0 port that is located between the microphone jack and the DVD drive. There is also a eSATA / USB combo port. The eSATA portion works fine, but the USB does not work. At first I suspected that the USB controller was probably starting to fail. I don't understand why all but one USB port functions properly. 
    I have tried reinstalling the chipset drivers, updated my BIOS, and I tried to see if the ports are recongized in Linux. None of those work. I also checked the ports to make sure there are no bent pins. My warranty period just ended so I was wondering what I can do now. I don't mind opening up the computer, as long as I know what to look for.
    Thanks in advance!

    hi idaggerpwn,
    The USB board must be bad. Try to re-seat the cable from the USB board to the motherboard and check. If this doesn't work, check if the USB ports are somehow disconnected to the PCB. If they are, you will need to hire an a technician with board level soldering skills to reconnect them or you can contact lenovo for service to replace this part. (fees may apply)
    Check page 78 (see #10) of the hardware maintenance manual (HMM) for the USB board location. To access the USB board see page 53 of the HMM.
    Best regards,
    neokenchi
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • [MSI E350IS-E45] Problem with DVD drive

    Hello my friends.
    I just bought this little board to make a HTPC for my daddy and Im getting a hard time with it.
    I installed everything fine and installed windows 7, via USB flashdrive and when i rebooted I tried to put the CD with drivers to finish installation, but whenever i put any cd inside this drive the computer boots.
    If I start the computer with CD inside the drive, it will just hang with a 98 error code down and just wont start the windows.
    The computer have the following parts:
    - Spire PowerCube 300w (http://www.spirecoolers.com/main/product_detail.asp?ProdID=826)
    - MSI E350IS-E45
    - 2x2gb OCZ SIGNATURE DDR3 1333MHZ, configured as 1066mhz.
    - 1x OCZ AGILITY 60GB SSD
    I tried change the sata cable from one place to another. This psu is very good and have enough power to this setup, this psu was tested with a core i3 system (wich by the way consumes way more power than this HUDSON guy).
    Please, dont lie to me... Im on this busines for almos 2 decades and I know that there is something very odd happening here, I just downloaded a new bios version and will try to do a bios update later when i get home to see if this problem is solved.
    Thanx in advance!

    First of all, I would redo the cooler paste.
    It's my experience that the installed thermal-pads are no good.
    I have the E350IA-E45 myself and I removed the pads and the temperature dropped significantly.
    I informed MSI about this and they are currently retesting the cooling solution, removing the pads for grease can lower temps as much as 10C!! (or more)...
    As for the PSU, my system with 4! 1TB harddisks and full load hardly uses more then 55W tops, that PSU should not be a problem.
    However, do consider the drive can be faileing, OR the drive is bootable and crashes before Windows can start.
    I have noticed that our Forum-flasher crashes too with exactly the same symptom.
    Anyway, what do you mean the computer boots if you put a CD in? Is that after or before Windows is loaded?
    Because before it can mean the CD is bootable, if it's after Windows is loaded it probably means the drive is bad.
    In any case, do check the thermal pad under the cooler, see in the BIOS how hot the CPU is.

  • MSI E350IA-E45 gigabit LAN problem

    Hi there, I'm having some problems with my gigabit connection on my MSI E350IA-E45 rig.
    I'm using a D-Link DGS-1005D Gigabit Desktop Switch and my other PC hooked up to it has a 1000mbps connection while the connection on my E350IA-E45 rig is stubbornly on 100mbps connection.
    I have already installed the latest Realtek PCIE LAN driver from the product page (release date 2011-06-02). Is there anything else that I missed? Maybe a BIOS issue of some sort? Would appreciate any advice on this matter.
    (btw, I'm running 64-bit Windows 7)
    Thanks

    To answer your question between Cat 5e and Cat 6.
    It's the bandwidth that they have:
    Cat5(e) - 100MHz -   100BASE-TX & 1000BASE-T Ethernet (e-version is just a bit better tested, nothing more)
    Cat6 - 250MHz  - 1000BASE-T Ethernet
    BUT, CAT5(e) can only be used with 1000Base on short lengths, upto 15 meters however it's not sure it works at all.
    I use CAT5 between 2 1000Base switches and it does 30 meters with ease, but switches are less sensitive then a single networkcard or between cards.

  • Gpu core clock low msi e350ia-e45

    I'm been running into a problem while bitcoin mining.
    I noticed that when I moved my MSI e350ia-e45 setup into my computer room that the Mhash/s starts off at 11.2 then drops to 4.3 after a couple of minutes.
    The previous room was about 66F ambient temps, the new room is about 75F.
    I downloaded msi afterburner and noticed that when my Mhash/s drops, my gpu core clock speed drops to 200mhz from 492mhz.
    This happens when the gpu hits 60c-61c.
    I was running catalyst 11.6 and then tried 11.7 with the same problem still.
    I've upgraded the bios to the latest 1.5 and still no fix.
    I've tried disabling cool n quiet in the bios.
    I upgraded my case cooling.
    I added thermal paste(which is why it changes in minutes rather than seconds now).
    Still no luck.
    This is a little bit of a let down as I also own a C-50 based netbook that does not exhibit this behavior.  It will happily run at the 278mhz gpu core clockspeed past 80c.
    The e350 is rated up to 90c so why would it underclock the gpu at 61c?
    My friend has an asus e350 board and in my room it doesn't underclock the gpu.  His runs at a steady 78c in here.
    I can only think that it is a bios issue.
    Any idea's?

    I moved it back to the other room with the lower temps and the issues vanished.  Too bad it can't stay in that room(the ethernet connection to that room travels through the outside and is prone to killing switches/routers/ethernet cards during lightning storms.
    I guess it's not much of an issue,  but the whole reason for buying an e350 was the higher gpu clock rate compared to the c-50.  It's kind of pointless if the gpu drops down to 200mhz when slightly heated.  It makes my c-50 netbook much faster than the msi e350 motherboard.
    I love the  motherboard, and all it's features,  except for the clock problem.
    I'm still hoping it's a software issue and not a bios issue. 
    I'll try installing an even earlier version of catalyst.
    I will be installing linux to see if the problems persist.

  • MSI E350IA-E45: 61C 4300RPM in idle

    New MSI E350IA-E45, open computer case, no OS yet. Check BIOS HW monitoring page: CPU temp. 61C, CPU fan speed 4300RPM. I can't check full load temperatures (no OS yet).
    It seems to me it is too high temperature and as the result - quite noisy cooling.
    What could you recommend? Send to replace/repair?
    P.S. Glad to read about any experience with this MB temperatures.

    Quote from: Bas on 12-May-11, 16:25:14
    Do not use M-flash!!!
    >>Use the MSI HQ Forum USB flasher<< instead.
    M-flash has killed so many boards that it's not funny anymore.
    (Yes we are telling MSI this every chance we have but they keep in there )
    Lesson learned ... I wish I new that before I tried to use the m-flash

  • MSI E350IA-E45 BIOS V1.5 fails to install

    I have a MSI E350IA-E45 motherboard, currently running V1.4 of the BIOS (which I had previously flashed from 1.3).  I downloaded, unzipped and attempted to install the 1.5 BIOS last week, and it just hangs during the flash program using a bootable DOS USB drive.  I tried 2 different USB flash drives, and I also tried using the M-flash method.  No luck.  It behaves as if the BIOS image is corrupted.  I tried downloading it from a different country's MSI server, same symptom.  Has anyone here successfully upgraded to this level BIOS?  Thanks!

    Henry, I tried the forum utility.  It appeared to install ok on a USB stick, but would not boot.  Upon inspection, the USB stick did not have a DOS kernel installed on it, so I gave up on that method.
    I eventually got the BIOS updated via my own original bootable DOS USB stick, using the AFUDE234 program.   For some reason, I had to turn off the HDMI-connected HDTV I use as a monitor, and plug in a standard monitor via VGA.  I guess there is a video mode issue under DOS.

  • MSI E350IA-E45 Entering Bios

    After having pressed the Del key during booting up -  the computer hangs with "Entering Setup" shown in the bottom left of the screen.
    * The problem was orignally found with the 1.0 version of the Bios but remains after upgrading to 1.5. With both versions the Bios was cleared with by switching the JBAT connector.
    * Memcheck86 has been executed and reports no error.
    * Attempts have been made with the SSD and BR drives detached with no joy
    Setup is as follows:
    1     MSI E350IA-E45, AMD E-350
                           Mini-ITX, Hudson M1, DDR3, 1xPCIe(2.0)x16, SATA 6Gb/s, USB 3.0, VGA,
                           HDMI
    1     Crucial DDR3 1066MHz 4GB KIT, CL7,
                           Kit w/two matched DDR3 2GB, 240pin
    1     Corsair SSD Nova Series™ V32, 32GB
                           SATA2, 2,5", 195MB/70MB/s read/write, incl 2,5" to 3,5" bracket
    1     Lite-On DVD±RW/Blu-Ray Reader, IHOS104
                           SATA, 4x BD-ROM Read, DVD±R: 12x, DVD±RW: 8x, Bulk, BLACK
    1     Ace Polly Mini-ITX Svart
                           Fan: 1x 80mm Back, 150W PSU, mITX, 18 dBA, 2x SATA, 2x USB2.0, HD
                           Audio

    Well, Ace is way down in the quality lists. The Ace was bought from Komplett in Sweden, would I gissa. But it is not sold any longer, likely because the quality simply was too poor:
    http://www.aceofsweden.com/ace/case/mini-itx.html Apparently only around for a single year.

Maybe you are looking for

  • How can I run a counter by number of times the script is run

    So I've created a script for disabling exchange mailboxes and moving them to a disabled OU in AD.  I currently have this set to run once a week via scheduled tasks but instead would like to kick it up to nightly and improve on the logging. Right now,

  • Tables not archived with CO_ORDER

    Hi All, CO_ORDER is the archiving object for archiving orders in CO The following tables though they are listed in DB15 transaction are not getting archived with CO_ORDER but the table entries are deleted while running the delete program pertaining t

  • Managed library with Time Capsule

    I have just started to move my stuff from a PC to my new MAC so I am not totally up to speed with the MAC yet, so please excuse me. I have a Time Capsule(TC) connected to my MAC via an ethernet cable and it also acts as my wireless router. I am trans

  • Audio Is out of sync in DVDSP

    Audio Is out of sync in DVDSP but the FCP file used for QT export is fine. The compressed AC3 even seems streached like it's out of sync in the beginning but gets closer to in-sync as it plays down the timeline. I've used "Clip start trim" to adjust

  • QuickTime in Flash

    Hi, I've got a Quicktime movie file that requires being streamed within an SWF online. I wondered if this was possible and what other programs you might need to make this possible. I've read about using the QTSS and other programs are recomended but