MSI Eclipse PLUS Problem, HELP ME !!!

Sorry for my poor English, I am an Italian boy!
I bought a MSI Eclipse and I assembled a PC
check all connections and perfect, first switch
black screen, no signal, I think the GPU, the change .....
but nothing, black screen, NO signal video !!!!!
What is the problem ....????
I state that I CPU core i7 930, may be the problem ...????
CPU does not support possible black screen!!
I do not think since at least the post bios should see!!
Help me please!!

Thanks Henry for information
I decided to make a change, through a support bracket
put a small fan (60mm) near to the chipset .....
As soon as I made the change post some pictures
Hope will be a nice work!!
Thanks again!!
this is my new PC
Configuration HW my new PC:
Case: Cosmos Black Edition (Fantastic Case)
Power supply: Corsair HXEU 750
Motherboard: MSI Eclipse PLUS X58
CPU: INtel core i7 >> 930
Cooler CPU: Zalman CNPS10X Extreme
RAM: G.Skill Ripjaws DDR3 1600MHz
Graphic Card: Sapphire HD 5770
SSD System: INtel X-25 M/G2
HD Storage: Samsung Spinpoint F3>500GB
Audio Card: CREATIVE SB X-Fi Fatal1ty
System Speakers: Logitech Z2300
Keyboard: Razer Lycosa Mirror Gamer
Mouse: NZXT Avatar Black
Mouse tensioner: Roccat Apuri
Rheobus: Aerocool V12 XT
NEON UV: Revoltec Neon Twin-Set
Group Fan: Noiseblocker BS XL2R
Monitor: BenQ E2420HD
Operating System: Win 7 Home Premium 64bit

Similar Messages

MSI Eclipse Plus problems

Hi Guys,
Spec as follows;
MSI Eclipse Plus
Inwin 650W Commander 80+ PSU
i7 920 CPU
6x 2GB Apacer DDR3 10600 1333MHz
MSI N275GTZ (Twin Frozr) GPU
Seagate Barracuda 1Tb 7200 HDD
LG GGC-H20L BluRay/DVD
LG W2343S LCD monitor
Logitech MX5500 Revolution Cordless Desktop
Logitech Z5500 Digital Surround Sound
MS Vista Ultimate 64bit
Bios Rev 1.0
After a week of struggling and the box traveling back to the wholesaler twice the OS is loaded and the MB and graphics drivers. I have faced problems from the incorrect voltage RAM being supplied (1.9V) to a horribly unstable system that boots when it wants to. Currently when the systems boots there is a 25% chance that graphic of the "windows starting" page is corrupted and the PC hangs.
This is using the only current configuration that will boot to hand to OS. I have removed 3x memory modules and only left the Black slots populated. When I populate the blue slots over and above the board quickly overheats and becomes unstable. Upon reboot either cold or hot the system will hang on "DDR init", reboot 3 times or more and sometimes displays the overclock error.
Does anyone know what the problem is and is there a workaround or update to correct this. This PC has cost plenty dough and is frustrating the hell out of me.

Max voltage for ram is 1.65V , change the settings manually if needed in the bios.
Try asking a new bios on the MSI on-line support , there is a new one but it is beta i believe. (A7566IMS.111 date 1/06/2009)
They gave me one(beta) for my eclipse (not plus)and mine is running like a rocket.

MSI eclipse plus startup problem

Hi,
I have the MSI eclipse plus motherboard, but I have a strange startup problem.
Sometimes my computer fails to start up. When I try again sometimes it works fine. (without changing any hardware or software configuration)
The Eclipse plus has a small D-led2 panel that shows information about the startup phases.
When my startup fails, the panel mentions: CPU init. And the error Code is FF (this means: power on and first initialize CPU)
(This is the phase just before DDR init).
So the startup fails in a very early stage of the startup process, (before I can access my bios)
When the start up fails, I have to disconnect the power cable, reconnect and try to start again. This is a very uncomfortable situation.
I have the latest BIOS version 21/04/2009 V1.0
I tried the fail-save default options in the bios.
My processor is i7 940
RAM: OCZ DDR3 . 6 pieces of 2GB. 1600Mhz (3 dual channel kits)
Power supply: Corsair 1000Watt
I hope somebody can help me.
Thanks in advance

Please note that the memory controller was moved into the CPU with the i7 - it is no longer part of motherboard chipset (MCH). You're not the first and probably won't be the last to buy the wrong type of DDR3 memory for your i7 rig. People, before you buy; check if the memory you are handing money over for is actually suitable for your CPU. Simple really as they will state they are i7 compatible. The i7 has a recommended maximum voltage of 1.65V for the integrated memory controller, 1.9V is probably a dangerous voltage to set it to (if the BIOS even allows it). To quote the OCZ FAQ:
Quote
The memory supply voltage also powers the receivers and senders on the memory controller with a voltage plane known as VDDQ. Because the Corei7 is manufactured on a 45 nm node, the logic is sensitive to overvoltage and Intel defines the upper safe limit for the Core i7 as 1.65V.
So to answer your question:
Quote
I still have one question: What do I risk with my DDR3 memory that is standard at 1.9V
More than likely, the integrity of the i7 940 itself. You have to ask yourself, "What's cheaper to replace... the RAM or the CPU?" The answer should be simple enough to work out for the average user.
I'd be taking the RAM back if at all possible and exchange/upgrade it for an i7 compatible kit (which will be three/six stick tri-channel, not two/four sticks dual-channel) designed to operate within the 1.5V~1.65V recommended voltage range. The OCZ equivalent (comparing what you currently have) to what you want would be this range.

MSI Eclipse Plus cannot startup and always on "suspend"

Good day everyone, I'm at wits end. Currently using the MSI Eclipse Plus with i7 920 (not overclocked yet) with a Gigabyte 800W Odin Pro Power Supply. The problem I'm encountering is at the startup. When I press power button the board blinks blue like normal and immediately goes into suspend mode. (well im guessing it is cos there is a yellow led light above the power button on the motherboard indicating suspend).
I tried unplugging devices, fans, hard disks, all peripherals but the motherboard just wont boot up.
The funny thing was yesterday I was using the computer and it was just fine. No problems...until this evening when it decided not to boot at all and stubbornly display the yellow LED stating its on suspend.
What gives?
Hope you guys can help me cos really I am so tempted to ditch this board right now.
Stefan

Sounds like all is well. That's good news. If all is confirmed stable, I wait a week or two before OC'ing to give everything some time to settle in. There is some real good OC info in the OC & Modders part of the forum. Actually, when you are ready to start OC, it is best to start a new thread in the OC & Mod section of the forum. If your CPU cooler is stock original, 3.5 is probably a realistic goal. A base clock of 166-7 & multi 21 with Turbo Boost, should net about 3.507. Keep in mind, the RAM is affected as well, & those settings will probably need some adjustment as well. There are other settings that need to be changed too. When you create your new thread, be sure to make a signature of all your system components. It makes it a bunch easier to make recommendations.

Overclock MSI Eclipse Plus with Intel Core i7 920

Hi,
I need help on how to overclock MSI Eclipse Plus with Intel Core i7 920?
Here are my system spec.
MSI Eclipse Plus
Antec Quattro 850W PSU
Corsair TR3X6G1600C9
120GB Sata HDD
Rgds

With a stock Intel CPU cooler, I don't recommend going past what default voltages can achieve, excluding maybe a memory voltage increase or timings adjustment if needed. Some utilities are very important to have before starting to OC such as Real Temp & CPU-Z. What are your CPU & IOH temps reading in bios H/W Monitor? The temps of the individual cores is also very important, which Real Temp will provide you with.
As mentioned, with a stock cooler, I would suggest not going past about 3.507 (bclk 167 X 21). Other settings need to be changed before this is done however. We need those temps too, before specific settings can be suggested. The last thing any of us want to do, is make settings changes & voltage recommendations that may damage your system.

Msi eclipse plus

Hai i have a strange problem with me eclipse plus combined with corsair dominator 3x2 GB TR3X6G1866C9DF in triple channel mode (black slots,2,4,6) the sytem constant reboots after showing d4 led...
Placing one memory in slot 2 works fine for all three, also puttiing two modulus in slot 2 and 4 off whatever combination of the three works fine windows 7 installed.
Tried all kinds of cell menu settings found on the net and msi and corsair forums and memory timings no luck with three in triple mode unsuccesfull.
I have an i7 920 processor and gtx 295 and 850 W silverstone power supply.
Is there an eclipse plus bios update like for the eclipse standard mobo that couls help me?
Or should i buy other memory and which and forget about the dominators.....180 euro lost.....

Quote from: HU16E on 10-September-09, 03:46:10
I guess you could argue the case with the shop, although rare, the pins could have been bent from the start. Otherwise, an RMA to MSI will be needed. At the top of this page just under the big blue MSI logo, you should see the 'Service' tab. Good luck to you gulare, & hope it is resolved soon for you.
When I bought my Eclipse (FluidTek in Sydney, Australia), I was made to remove it from the anti-static bag the shop, inspect it and sign off the pins were undamaged. I can understand this from the vendor's point-of-view as it leaves no doubt as to the initial condition of the board and who is responsible for any socket damage.

MSI Eclipse Plus, SLI, PCI and double hieght graphic cards.

I'm intrested in building a system with the Eclipse Plus and 2 card sli setup.
The manual states that for a 2 way sli, graphic cards should be placed in slots top 2 pci slots. MY graphic cards are double height so placing them in these slots would block out the only pci slot available which I need
Is it possible to mount the graphic cards in the first and 3rd slot and still achieve sli?

Are you sure about that PD?
syrus will just have to give it a try. Please let us know if it works.

Msi Eclipse Plus (Sli) Boot Problem !

Hi
I have a problem , but i'm not sure if it's a motherboard problem ! So i request some help to clearly identify the troubleshoot .
When i try to launch my computer i got 4 bip and message on the Debug led (on the back of the motherboard) :
- It say FF
And on the DLed 2 i have the message :
- CPU Ini.
FF means status = Power on and Initialize CPU (see in the booklet of MSi Motherboard)
All is running : CPU Fan and front fan turning; Power on Hard drive ; GTX295 Led is Green , but nothing happen . The card stay in freeze position .
I have check the PSU 1000w Corsair . GTX295 have power , Motherboard led of CPUpower is on (6 blu Led )
I have unplug all component on motherboard except PSU and still the same message and status
I have pull off the PSU and press the Cmos reset button .
I have Pull out the battery of the motherboard for 30 sec , still nothing
So i don't understand what happened . May be CPU is down or the motherboard is down i don't know if there is a solution to identify the problem
All Component are new from monday .
I apologise for my english
Thanks for helping if you got any idea

If you do pull the CPU for reseating, be sure to check carefully for socket pins damaged or bent.

Help with 4GHz Overclock on MSI Eclipse Plus

Hi all,
I'm new to overclocking, but have read up on some materials. I'm trying to get my i7 930 to 4GHz on air cooling, but the system seems relatively unstable with BSODs and Prime95 crashing (including workers stopping due to error) from time to time.
My specs are set out in my sig below.
For now, I have disabled C1E, EIST, Turbo mode and Spread Spectrum and my BIOS settings are as follows:
Base Clock - 200
Multiplier - 20x
Memory Ratio - 4
Uncore Ratio - 8
XMP - Disabled
QPI - Full Speed
QPI Frequency - 4.8
CPU Voltage - 1.336 (+0.14)
QPI Voltage - 1.35
CPU PLL Voltage - 1.88
DRAM Voltage - 1.64
IOH Voltage - 1.202
ICH Voltage - 1.200
Idle temps around 45-46 C, with 85-88 C on load (ambient temps around 28 C)...scary, I know.
Does anyone here have this motherboard? What has been your experience so far? Is there any advice that you can give me to stabilize my overclock? I'm not sure what else I can do.

Thanks for being the first to help. I tried your suggestion. The lowest available Memory Ratio is 3 and I set the Uncore Ratio to 6. However, PC did not manage to POST at all and it restarted 3 times thereafter for reason of failed overclocking. At least with Memory Ratio 4 and Uncore Ratio 8 is more stable for this setup?
I also tried changing the multiplier to 19 and 21 but still not much. Right now, I've reduce the overclock to 3.8 GHz using the following settings:
Base Clock - 180
Multiplier - 21x
Memory Ratio - 4
Uncore Ratio - 8
XMP - Disabled
QPI - Full Speed
QPI Frequency - 4.8
CPU Voltage - 1.240 (+0.02)
QPI Voltage - 1.35
CPU PLL Voltage - 1.86
DRAM Voltage - 1.65
IOH Voltage - 1.355
ICH Voltage - 1.200
Perhaps I'm too ambitious in trying to reach 4GHz due to limitations in my system?

Z87 msi mpower big problem help me please auto turn off and never boot

i had bought msi z87 mpower from amazon 2 weeks ago while trying to open it, it just turn on and leds light up but no beep/ no display= no signal , i tried to take it out of case the same problem tried it with 1 stick of ram g-skill 1600 mhz 4g same problem i removed the vga card same problem i removed the ram , the motherboard didn't recognize it and power on led on but no beep nothing debug led all the time 00 , with cpu i5 4690k only some people told me , mobo didn't recognize the cpu because it's haswell refresh need update for bios , but how when i can't see any screen and it can't even boot just fan spin and leds light up nothing else , i sent it to some msi technical support in egypt to try to make bios for it , he told me he could bot it and update it from windows normally without any problem and he sent it back to me , while i took it to try at my home with my cpu the same problem motherboard didn't recognize my cpu , i had connected everything and as well wifi card with the pin and the 4 kits of 16 giga ram trying to power on same problem i did 1 restart and the motherboard never turns on again like dead
i get it out the case and removed everything except wifi card same problem no power i just removed the wifi card it turns on for 1 second the turn off automatically i connect it again, and mobo don't turn on again i just release this pin of wifi card out of mobo the leds turn on like if the pin of wifi card shorting the motherboard i don't know why i removed it at all and try to turn on the motherboard light up and fans works for 1 sec then turn off automatically like the motherboard shut down it self for safety i try to connect the vga card only with 1 ram and cpu but the motherboard don't turn on at all , so motherboard only turn on now with 1 ram and cpu just turn on for 1 sec and then off if i connect anything more it will not turn on at all same problem with other power supply i sent it back to technical shop they said it's just bios corrupted and nothing bad but they told me they can't make it because bios files on msi site doesn't work for some reason and they want to give me it back like that turn on/ off immediately what could i do , did they make something bad when i sent it to them at start because it was turn on normally and when i try it just 1 restart and full fail to power after that and they admit , they had work through it to windows and make normal bios update so what would be the issue , i feel like if wifi card made some short to the motherboard with it's pin or the bios failed ot recognize wifi card and failed after 1 restart i don't know where to start or what to do psu good cpu good ram is good tested what could make some motherboard no turn on , as well i have removed the battery for 5 minutes and try with it and i made clear cmos button still same and they said they didn't touch motherboard while making bios
help me please
pc spec:
cpu i5 4690k
mobo msi z87 mpower
ram g-skill 1600 4giga
vga zotac gtx 970 amp extreme edition OC
psu seasonic 600 watt eco
case corsair spec 03 gamming

Quote from: bassam.mohamed20 on 13-April-15, 02:46:28
okay tomorrow i will try another processor chip but what if doesn't work , same here i suspect it's bios so what could let some motherboard turn on and off immediately?
Bad CPU? bad Motherboard? Other stuff.
The only way to know is testing parts.
You said it already worked with another CPU. Did you check CPU socket pins?

MSI Eclipse Plus Motherboard Featuring NF200 Chip is it worth the it????

Well MSI have launched there i7 with NF200 support according to some uk sites and the price is like ouch ouch and ouch again £350ish. Also it seems from some reports on the NF200 it slower that the X58 without the chip so is it really worth the money? Or are we been ripped of by the computer industry.

I agree with mechsner , for now it's overkill , on the eclipse you can run 2x pci-e 16x or 1 pci-ex16 and 2 x pci-ex8 for triple sli.
If you use 2x gtx295 or 2x 4870x2 you got quad sli on 2x pci-ex16 (black slots).
Maybe in the future when gpu's get stronger and faster but now ?
Now sli is software related on the x58 chipset, but with the nf200 it' hardware related. is this better ?
Follow the link for a interesting reviewhttp://enthusiast.hardocp.com/article.html?art=MTYwNiwxLCxoZW50aHVzaWFzdA==
you will see something very strange.

MOVED: MSI P7N SLI problem, help!

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=118438.0

Quote from: Lugaidster on 16-July-08, 04:53:03
That bios didn't fix the multiplier issue. It's already flashed...
I was thinking that you have missing MP.
"I haven't tested every possible fsb setting but I don't want to, I just want to run my cpu at the 8x multiplier "
What's the problem to do that?

MSI P7N SLI problem, help!

Is there a way to get a bios that has the quad core multiplier issue fixed on a P7N SLI-FI board? I mean, c'mon a fix has existed for the other p7n boards for months now. Isn't there one for my specific board??? I'm about to flash a SLI Platinum Bios into my board just to see if it works, 'cuz I'm loosing it already . Any help would be greatly appreciated since I can't move my q6600 from it's stock settings, 3600 mhz is a "no go" with my cooler and there seems to be an fsb hole between 1200 to 1600 mhz on my board, I haven't tested every possible fsb setting but I don't want to, I just want to run my cpu at the 8x multiplier :(

Quote from: Lugaidster on 16-July-08, 04:53:03
That bios didn't fix the multiplier issue. It's already flashed...
I was thinking that you have missing MP.
"I haven't tested every possible fsb setting but I don't want to, I just want to run my cpu at the 8x multiplier "
What's the problem to do that?

MSI Eclipse (problem)

Dear MSI Teams,
Currently my MSI Eclipse plus was send for RMA. 1st ram slot spoil. 1st sata spoil. But cannot 1 to 1 exchange. And also prblem with the skype.
Now the distributer loan a MSI Eclipse to me. Now my pc keep restart. WTH!! Supporting MSI so many years and get this !
Regret to get this MSI Eclipse plus & my previous (MSI Eclipse). Going to change ASUS Rampage II. Solid and not much problem compare with MSI Eclipse plus.
WHAT DO YOU GUYS SAYS???????

Are you asking for assistance or...? How about giving details about your system to see if you have some component creating this experience. Please give us your complete system specs including the PSU(the brand, model and especially the amps for the +12v rail(s)). Please read the >>Posting Guide<<

Re: MSI 58 eclipse plus won't start

Hmmm...bad board. I guess my context was completely wrong. Hehehehe

Quote from: jcniest5 on 20-June-09, 03:59:58
Buddy, just a word of advice...6GB OCZ Platinum DDR2-12800 and MSI Eclipse Plus just don't mix. I have exactly the same combo and was not able to make it work right until I went and bought Corsair 1600 memory. The OCZ memory has tighter memory timing, but it works horrible, even when I relax their timing to 9-9-9-24 like that of Corsair. Still crapping out every single time, even at stock speed (non-OCed CPU)! I originally thought that my memory kit was bad, si I RMAed it, got a new kit from OCZ, installed it, same thing! My conclusion? OCZ Platinum and Eclipse Plus just don't mix.
The Corsair memory kit works perfectly, stock or OCed. To further isolate my issue, I OCed the CPU to a certain speed, use the relaxer timing of the two memory kits and tried one at a time. I've tried running it at 1066, 1333, 1600 and everything in between. With the Corsair memory, I was to run my board stable at everything. As soon as I changed to the OCZ memory, the PC crapped out every single time. It would crash, freeze, BSODed out....etc...etc.... The OCZ memory is now sitting on the shelf.
Go and get a different brand of memory. It will make a world of a difference, I tell ya.
well i would belive that my pc atleast would run fans e.t.c even if it was the ram, as its now. i`l steal some ram from a buddy and see.
thanks for ur tip.
Regards Lockness

MSI Eclipse PLUS Problem, HELP ME !!!

Similar Messages

Maybe you are looking for