MSI ENJOY 10 PLUS, Media USB not Detected in CPU (HELP)

winpad enjoy 10 plus I can not be touched, do not work, and the device is not detected on the computer (no media), so can not upgrade the firmware again, the power button (Android system recovery utility v1.3.38) not work, though already updated drivers, follow instructions, the result was like that, please provide a solution, 

Try to use another cable to see if the problem comes from the cable.
Also, you can try to insert the straighten paperclip to the reset hole and plug the AC adapter to power on the tablet again.

Similar Messages

  • Zen V Plus - Media Explorer not detecti

    Hi, I'm not sure if this has been posted somewhere along the lines. If it has sorry.
    Anyway, my problem is I have my V plus attached to my PC I have it turned on and it says it's docked.
    But my Media Explorer and other various Media Sync programs won't detect it.
    It shows up in My Computer as a Portable Device but that doesn't really help me that much.
    I can transfer files onto it the old fashioned way of dragging and dropping but i'd really like the convenience of the Media Explorer.
    If anyone could provide me with a solution to this I would be quite greatful.Message Edited by Konis on 04-6-200702:24 PM

    I had the same. I understand, that another programs ocupate player befor Zen media Explorer. GoControl Panel-> System-> Devace Manaderhere you will find? Portable DevicesIn my PC here was MCT devise (something that, not remember)I delete it !!!Than start Creative Media Explorer and after ?Disconnect Zen Player and connect again.Now Explorer find Zen Player and in Portable devices I have Creative Zen V plus?Enjoy

  • My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable.  When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

    My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable.  When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

    I have had a 3GS for 2+ years.  After upgrading to IOS 4 (now 4.3.5) I began having problems.  In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that!  I connected to itunes and it did restore from a backup but it is a major inconvenience.  I am also searching for answers, but better back-up regularly!

  • Usb not detected on post

    Does anyone have this problem whereby your usb devices are not detected by the system during post? the only way to get it recognized is by quickly unplugging and plugging back in when the reset button is pressed.

    Core i7 Ivy Bridge i7-3770K 100 3.50 1M 8M E1 77 7751vA3.zip
    http://www.msi.com/product/mb/Z77A-GD65.html#/?div=BIOS
    >>Use the MSI HQ Forum USB flasher<<
    For full support you will need to update anyway, so might want to start there.
    Make sure to re-install all of the intel drivers when you are done.
    Edit: They just released a new full release so that is probably your best bet.

  • LAN card and USB not detected (KM4M-V)

     
    I just formatted my PC yesterday, installing Win XP SP2. But the intergrated LAN card and USB is not detected in device manager. I tried HELP but cannot solve the problem.
    I am a little confused. After formatting and installing Windows, the hardwares who don't have driver will be having a question mark icon in the device manager. But for my computer, no USB or LAN card is written in the device manager. How can that be?
    I had checked my BIOS and nothing indicated to change the USB or the LAN card.
    Where did i go wrong? I am using a MSI KM4M-V motherboard.
    Anyone can help? Thanks.

    Quote
    because there are too many spywares in my PC
    so was your computer seeming to be sluggish as well then?
    Is your problem caused by your PSU? post your system details and full specs of your PSU so we can assess further

  • Usb not detected in windows 8.1

    Hi,
    First of all thank you. I am happy with your customer support. I had a problem with the unresponsive screen in my HP OMNI 10 which has been solved now.
    Now i am facing a new problem with the USB. I have tried all the possible methods but i am not able to find a solution.
    My USB drive is not detected whereas SD card is detected. I also ran a component test which showed failed.
    Please help me out.
    Thank You.

    Hey @varun_viswanath ,
    Welcome back to the HP Forums!
    I see your USB is not being detected by your Omni 10 tablet.
    Can you tell me which drive you are connecting (make, model, and size please) and which OTG cable you are using for this?
    It would also help to know which Omni 10 tablet you have. You can see here for how to find the model: Locating the HP Omni 10 Tablet model number.
    Thanks.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • HP DeskJet Ink Advantage 3525 USB not detectable

    My printer HP Deskjet Ink Advantage 3525 suddenly not detectable by the computer, the following were made for troubleshooting
    - tried replacing USB cable, failed.
    - tried connecting to other computer, failed to detect
    In the computer where it is originally connected and installed, I
    - tried connecting different printer, it was detected.
    OS- Windows 7 Pro
    Please assist.
    Thanks

    Hello DariusPH.
    I understand you are receiving problems where your USB cord isn't detecting on your computer. You have tried the necessary troubleshooting steps. Please follow this HP document on Troubleshooting USB Connections For Windows 7.
    If the document above doesn't fix your issue, then please follow this entire HP document on 'Device Setup Failed to Complete' or 'Unknown Device'.
    Please inform me your troubleshooting steps and if this resolved your issue. I will continue to assist you if these documents don't resolve your issue.
    Ashley
    I worked on behalf of HP.

  • MY IBM - NET cam not detected!! help

    I am doing a project for video - conference/chat
    my webcam made by IBM is not detected by the JMF
    or JMF studio or regeistries.
    But it is working well with YAHOO messenger, or
    the application which has been given from IBM.
    Please give me solution.
    whether IBM is not in the devise list?
    or
    what?
    thank you,
    kiran

    IBM PC camera is not supported under JMF..try logitec quick cam or somethign else..u can find the list of supported webcams on the JMF home page

  • MSI P67A-C43 (B3) USB not working but theres a twist! Help!

     :lol_anim:I Have built a new rig with the MSI P67A-C43 (B3) Motherboard, 16GB DDR3 PC3-10600 1333MHz Memory (4GB x 4), Intel Core i5-2500K 3.3GHz 6M LGA1155 Processor, 550 Watt 80 PLUS Bronze Power Supply,24x DVDRW, 3.5" Internal Card Reader with 2 USB ports,    500GB 7200RPM 3.5" SATA Hard Drive(which i plan on upgrading just didnt want to waste money on the shitty HD they had.....
    So down to the nitty gritty  . My computer is running Windows 7 64 Bit, i have downloaded all of the updates and all of the Chip-set drivers, Bios, etc... i ran a system registry tool to clean up any errors in my registry and i have ALL of my drivers up to date.
    I have my USB mouse and keyboard that connect fine and are recognized by my computer, sometimes they stop working and start back up within seconds but windows does display any type of error or disconnection "this may have been fixed due to the registry cleaner i used i haven't had any hiccups yet" so i have my USB mouse and USB keyboard working fine and dandy now i think. got a new headset and the windows finds the USB Headset and it works Perfectly fine. BUT and this is where my whole frustration comes out. Whenever i connect my I-Pod Touch, I-Pod Nano, My Cell phone to copy files to from my SD Card, or my External My Passport drive Windows says "USB Device was not recognized" notification and in the Device manager it shows the one device with a yellow exclamation point and says "Unknown Device" I have tried to uninstall the USB hubs and reinstalled them perfectly restarted windows, still non of the devices work. i have tried making sure that windows tries not to turn off the device to save power, when i say i have tried almost everything i mean everything that is related with USB Device not Recognized. So i do not know what to do now, i have contacted the Manufacturer and they don't know squat about it or what could be causing it. the only thing i can think of is there is some hardware maybe that is not compatible i do hear some beeps when i start up i will have to come back and update how many beeps" i saw another post that it means the motherboard is trying to tell me something maybe this could be the issue. but i have tried every single usb port and non of them Recognize the device but when i plus in my mouse and keyboard in diff ports they still work so i am a bit confused. my last step is to return the computer to the manufacturer for a replacement or repair w/e i do not want to do this cause this should be working. my friend has almost the exact same MB and equipment and his works fine so i am getting a little frustrated with the issue Someone Pls Help me out. And yes i have tried turning off the computer, unplugging it and pressing the power button, and waiting like 1 Hour etc and still nothing. Drivers are Up-to-Date and Mother board bios and chip-set drivers are Up-to-Date as well. I hope someone knows or has an answer to help me out!

    Yes the Bios is Up-to-Date and they are not plugged into the Blue USB 3.0 ports(x2). oh and forgot to mention already did a clean install again of Windows 7 64bit and still nothing.  Im also wondering if the power supply is enough?? maybe?

  • HT201407 apple logo appear and iam unable to restore it i have tried everything still itunes is not detecting my iphone help is it a usb issue??

    my iphone got stuck in apple logo it freeze and neva turn off but still it can turn into recovery mode but iam unable to detect my device in itunes i have tried in differnt pc and change the new usb cable still its not working anyone .... plizzz help

    Hello there, ReaganFromImphal.
    The following Knowledge Base article should provide a solution that will allow you to restore your iPhone:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • USB not detected

    I recently brought a mac mini. First thing i did was update all the software, most importantly OSX to 10.5.1. I inserted a usb jump drive to transfer some file then properly ejected it. Now none of the usb ports work. I tried different devices; mouse, keyboard, external hard drive,... Tried rebooting. Nothing worked.
    Then i tried resetting the PRAM (CMDOPT+PR). It detected my external drive. But after I eject it, the usb ports stop working. Is it a hardware or software issue? It only happen with the usb ports, my firewire works fine. PLEASE HELP
    Message was edited by: PTran

    Welcome to Apple Discussions!
    ...but I didn't think they would fail so quickly, and with so little attached to them!!!
    The load created by a WD Passport drive I've used in my office has been sufficient to cause a number of IBM and Dell laptops to suffer failed USB connectivity, so I would not be surprised to see the same sort of issue with a Mac mini. Indeed, the documentation supplied with the drive warned that is should be used with its own power supply (sold separately of course) whenever possible.
    The mini conforms to USB standards, including voltage and current available on the bus to power external devices. However, not all devices conform to the standard in terms of load they exert.
    Have you tried the SMC reset procedure as described below? If not, then I would suggest you try it. If it does not help resolve this, contact Apple regarding the USB outage since it is clearly within warranty!
    a major design fault!
    Based on the number of reports of USB failures, it would seem not to be.
    To reset the SMC on an Intel mini:
    -From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
    -Unplug all cables from the computer, including the power cord and any display cables.
    -Wait at least 15 seconds.
    -Plug the power cord back in, making sure the power button is not being pressed at the time.
    -Then reconnect your keyboard and mouse to the computer.
    -Press the power button on the back to start up your computer.

  • Plantronics .Audio 510 USB not detected in Leopard

    Hi guys and gals
    I just updated my OS X from 10.4.9 to 10.5.1, and now I've got a bit of a problem with my Plantronics .Audio 510 USB headset. In 10.4, it would be detected automatically and work just dandy, but in 10.5, no such luck. It will not even show up in Sound in the Pref Panel. I've checked that the USB headset is receiving power, and it is. The mute button works and lights up, and the volume buttons affect OS X. The volume is turned up or down when I press them, but for the built-in speakers only.
    Any ideas?
    Thanks in advance.

    Hi guys,
    I've just bought the .Audio 510 USB myself. My system sees the headset but only as an "Unkown USB Audio Device". I can get it working, but I need to manually go in and select it in my systems settings and Skype preferences each time I plug it in.
    I also use NiceCast streaming software and it's the same deal with that. How are you guys getting on with it. Have you had any success since you last posted?

  • Q10 USB not detected in Link or Blend

    Q10 SQN100-3 Rogers
    OS 10.3.1.1.1581
    Link 1.2.4.27
    Connects wirelessly by default when Link first installed.  Blackberry Device manager shows Y and Z drives.
    When wireless connections turned off in Link or turned off at device and USB connected:
    Windows alerts that device has been connected.
    Windows Device manager shows Blackberry device as well as Network Adapter Blackberry Device, Blackberry Tethering Device, Blackberry Virtual Private Network.
    Blackberry Device Manager does NOT show any devices
    Device shows USB connected
    There are no firewall restrictions
    There is no problem with the USB connection or port
    USB connection on device set to manual IP address but that has no effect on Link
    Rogers Tech Support verbally says that it is a known issue that BB is working on but nothing on any forum says that including this one.
    Is this a known issue that is being worked on?

    I finally got it working:
    - I completely shutdown my Blackberry Q5 terminal and unplugged it from USB.
    - In the Windows Device manager, I can see the Blackberry Virtual Private Network in the Network adapter group, which is correct. But the Blackberry Terminal was not listed.
    - So I connect the USB back in my Blackberry Q5 device and turned it on with the switch on the top.
    - From there, Windows detected the terminal and installed the Blackberry Terminal drivers (automatically supplied with the BB Link software)
    - And Link started automatically saying that the BB is connected properly through USB.
    - When I turn on the USB mass storage, it works as well (and disconnect from Link at the same time), so  I have to turn off USB mass storage in the BB Q5 settings to make it connect back to Link through the USB cable.

  • N81 USB not detected

    Hi all,
    I own an N81 8GB model. I brought it 2 weeks back. I usually connect my Linux computer and my mobile using the accompanied USB cable. It was working fine and I was able to transfer files successfully. Recently my phone is not getting recognized by my system on plugging in the USB. I am not getting the mobile alert asking what type of transfer should the mobile activate. Previously once when I had this issue I did a couple of restarts (mobile) and luckily it worked at that time. But now it is not. I even restarted my computer but of no use. Please help me. Without the USB transfer the 8GB would be a waste. Thanks

    I had the same problem: I plugged the phone in my laptop's USB port -- and nothing no "ding dong" absolutely nothing! I tried plugging the phone to Linux box and no dmesg output here either.
    I thought I broke the cable or the connector, and got a new one -- but nothing. It was driving me bonkers. Sometimes, I wish I would have gotten the iPhone instead -- seriously!
    I discovered the "solution" for this problem by accident.
    Ok, here we go:
    1. Set a "quick alarm" in your clock application (i.e. two or three minutes past the current time).
    2. Turn the phone off.
    3. The phone will power up and your alarm will sound. Switch it off and the phone will ask you if you want to use the phone. Choose "Yes" here.
    4. Boom, magically your phone will be recognized again when you plug it to your USB port and the N81 will ask you to choose the transmission mode.
    5. You're done.
    Don't ask me what happens in the phone when the alarm goes off, and how it got in that "non detect mode" in the first place but this is how I fix mine now. As an explaination how it might have gotten in that "non detect mode" the only thing I can think of, and this is pure speculation, is that I might have had the phone connected to the USB port while the Laptop was doing a reboot. In the boot sequence a USB device was recognized, and the PC tried to boot from it and this might be what screwed the phone up.
    Anyways, good luck everyone.

  • Usb not detected - palm centro

    I recently purchased a Palm Centro.  The software was installed successfully and the Centro was able to Sync with the computer, however, I am unable to download music.  Windows Media Player (and my computer's Device Manager) does not seem to detect the device.  I connected my mp3 player to the computer, and it was immediately detected by Window Media Player.  I'm just wondering if it's the cable that's defective or the user.  Am I doing something wrong?
    Post relates to: Centro (AT&T)

    And you have no problems hotsyncing??? Well there are two things it could be either windows media player can't recognize the device properly or the conduit on the device is having a hard time recognizing windows media player. So you have two things you can consider either hard reset the device and test syncing to windows media player without syncing anything else back to the phone or try uninstalling/reinstalling windows media player.
    Post relates to: Centro (Sprint)

Maybe you are looking for