MSI Fan controller software for SLI ?

Is MSI think of make compatible their MSI fan controller ?

Quote from: TZBC on 04-February-15, 08:49:44
You mean "VGA FAN Control utility"?
it should be compatible with SLI, but system will recognize them as one graphics card, so you set the fan speed, two of the SLI card will response the same speed.
The status of the card is from the second one and nothing about the first one. it will be good to have a drop down menu to switch between cards.

Similar Messages

MSI fan controller and sli ?

I have 2 x MSI GTX980 Gaming SLI and I noticed that the fan controller gave me the status of the second card not the first one. How to get the info from the first card ?

In Fan Control it will only show one GPU temperature for your display video card. If you want both GPU temperature I think you can try download Afterburner. It will show both GPU temp.
http://www.msi.com/support/vga/GTX-980-GAMING-4G.html#down-utility&Win8.1 64

GTX980 gaming afterburner vs msi fan controller.

I noticed that the first fan are under the control of the custom fan profile from afterburner but the second one are under the control of the bios. Is there any way to have in afterburner the possibility to applied a custom fan profile for that second fan ?

^ Lol, then why MSI put this feature on these cards including 980 Gaming ? If their software, afterburner, doesnt have an update to fix this issue ?!
Also, i know that one fan for 980 gaming is controlled by gpu temp, and the other fan by vrm temps.

Fan Control Software for iMac G5

do you know any software that makes me able to control the fans of my imac. I want to change the speed of my fans.

You can control the fan speed to a certain extent by going to system prefs>energy saver>options>processor perfromance and selecting "reduced". This should slow your fan speed down, but I am not aware of any software program that will contriol your fans speed. It wouldn't be a good idea anyway to interfere with the settings the machine selects for itself, the iMac is very sensitive to heat and shouldn't have fan hacks.
Miriam

Need tech help for MSI VGA Fan controller for gtx 780 SLI

Just curios how to get the VGA Fan controller to work on the 2nd card that's in SLI? I can get the 2 fans to run 100% with afterburner but the middle one wont on the 2nd card? Thanks!

I have the same problem.
On GTX 780 Lightning, Afterburner will control both cards 90mm fans. Afterburner will not control the middle fan (fan 2).
The MSI fan controller will only control one card, not both. I think there was a major oversight here. They either weren't thinking anyone would SLi GTX 780 Lightning when they made the fan controller or its horribly broken. In my case Rakunvar, my bottom card (PCI-E slot 5) is controlled while the top card (PCI-E slot 2) is ignored.
I heard somewhere, they plan to fix Afterburner so it will correctly work with the 780 lightning. It seems to me they put the MSI fan controller in the box with the GTX 780 Lightning because they must've known that the current beta Afterburner wouldn't control the middle fan.

GTX980 SLI fan vs fan controller info.

I received my GTX980 Gaming 4G (2). I use the fan controller software but i wonder how to adjust the fan speed of each individually when i am in SLI ? So far so good. The cards gave me more performance then the EVGA GTX780TI. The cooling are better compare to EVGA cooling solution. A Happy guy
note : I pull off that sticker on the fan upward and peoples have to be careful of not pushing on the fan when you peel off that sticker or you will break the fan mechanic.

Quote from: pstlouis on 11-October-14, 05:05:38
I received my GTX980 Gaming 4G (2). I use the fan controller software but i wonder how to adjust the fan speed of each individually when i am in SLI ? So far so good. The cards gave me more performance then the EVGA GTX780TI. The cooling are better compare to EVGA cooling solution. A Happy guy
note : I pull off that sticker on the fan upward and peoples have to be careful of not pushing on the fan when you peel off that sticker or you will break the fan mechanic.
I've also just received my GTX980 gaming 4G (also in SLI). Freaking amazing!!
The only problem that I have with one of my cards is the MOSFT fan on that card does not shutdown when all the other do. PSTLOUIS, does all your fans turn off, once you have booted into windows?
NOTE: I have tested the card in which both fans turn off and it works on it's own. When I test the second card, I've noticed that the fans still doesn't shut/turn off.

Advice Needed for Audio and MIDI Controller Software

I am hoping someone may be able to give me advice on how I should approach my problem.
I am currently running a live show with audio backing tracks and a small 12 par lighting system. The light system can be controlled via standard MIDI. I am using iTunes to play back sets of backing tracks, and manually controlling the lighting system using a dedicated foot controller.
What I would like to do, is be able to use software to simultaneously play audio files and perfectly sync the lighting (fades, shots, etc. via midi) with the audio track. Ideally, I would be able to have the audio/lighting paired as discreet entities that could be grouped into sets.
i.e.
Audio-MIDI_1 = Audiotrack1 would always be paired with Lightcontroller_MIDI_events1
Audio-MIDI_2 = Audiotrack2 would always be paired with Lightcontroller_MIDI_events2
Audio-MIDI_3 = Audiotrack3 would always be paired with Lightcontroller_MIDI_events3
I could the create a set of Audio-MIDI_x tracks which could be triggered in any order.
I would like to have to option to be able to activate a single track, or have a complete group of tracks activated sequentially (but be able to stop the and start the group as needed - you never know what will happen in a live situation). It would be nice to have a time-line UI as well.
Now the final requirement: it should be able to run on a PISMO PowerBook. <cringe>
I hope I am not too confusing.
I am thinking MainStage would not be the software for this task as Leo is not an option for the Powerbook.
I have looked at QLab and showcontrolpro, but I don't think theses are right for me either.
Any help or suggestions would be greatly appreciated.
TIA

Gary,
With a Pismo you really are confined. I've been using some software from Alien Apparatus called Solo Performer Show Controller (www.alienapparatus.com) and it has a timeline to sequence lights where you can run 32 channels of midi or dmx lighting. The only setback is it needs at least a 1 GHZ processor. There may be a company like Sonnet that has an upgrade for your processor.
The software is able to run backing tracks, send midi controls to effects units or other software, send hotkeys for apps, synchronize lyrics in a window or on an external monitor, controls a dmx fog machine, and also has a six button usb foot controller which can be configured for many things such as scrolling your songlist to select the next song, change volume of tracks, change a light scene, send a hotkey, trigger samples, etc. It is a bit pricey at just under 600 dollars but the foot control is durable, the company has excellent support and they listen to users to add features to the software.
Hope this helps
Thor

New Need Sink needed for MSI P7N Diamond nForce 780i SLi (Socket 775)

Hi Guys,
I've been having a problem with my machine where it will be working away as and then suddenly restart. I haven't been able to pin point the problem as it can happen regardless of applications or load thats on the machine. I've also run a couple of app's to check the RAM and its fine. The only thing I've been noticing is that the 4 cores of my Q6600 seem to be running a bit hot. On average on Idle there running between 45-55oc. Does this seem normal? I'm thinking that the cpu might be over heating when I'm running apps. I've seen one of the cores up around 68oc when under a bit of load. I'm using the stock heat sink at the moment and would like to cool things down it see if that helps. Can anyone recommend something suitable for my motherbroad.
Thanks
Garret

Quote from: Garret C on 15-October-09, 17:22:47
Intel Core 2 Quad Pro Q6600 "Energy Efficient SLACR 95W Edition" 2.40GHz (1066FSB)
MSI P7N Diamond nForce 780i SLi (Socket 775) PCI-Express DDR2 Motherboard with Free Creative X-FI Card
Thermaltake ToughPower 750W Modular Power Supply
My Q6600 (also G0/SLACR but don't know what you mean by "Pro") is OC'd to 3.4GHz and has had no problems running stable. Highest temps during OCCT/Linpack and LinX/Linpack peak at 80C 1st/2nd cores - 76 C 3rd/4th cores. Other tests (e.g. Prime95 small FFTs) run much cooler. I've run 2hr+ linpack tests with no errors, so I don't think you need to worry about your temps yet.
However, may I suggest that you check into is your power supply, in particular the modular connections. I had the ToughPower 750W Modular before upgrading to PCP&C. I noticed that the ToughPower's modular connections had a tendency to be just a tad loose. They wouldn't dislodge but they had a little bit of play. I could jiggle them ever so slightly while they were connected. As a result, the CPU power cable (8-pin/4-pin) would cause a restart upon the slightest disturbance or sensation. I've since discovered that modular connectors also affect the efficiency, power noise levels, and overall performance of a PSU. All in all, I plan to avoid modular connectors entirely going forward. Many newer cases have excellent cable management features and even old-style cases can be cleaned up with a little planning and effort. So the modular cabling advantages don't offset the severe disadvantages. Even if your problem isn't due to the PSU, it's something I'd recommend considering replacing.
Good luck. Hope all the suggestions are able to help you nail down and resolve your issue.

Bios compatibility for SLI MSI 780 TI Gaming 3G

Good afternoon!
Well, before retailers and other places clear out their stock of the 780 TI, I'd like to get another one.
My question is - I've gotten an updated BIOS from this forum for my current MSI Geforce GTX 780 TI Gaming 3G. When I get my second one and attempt to use SLI - does my second card require the same BIOS that my current card was updated to for SLI to work?
Or do I not need to worry about that? I just want to get my head in order before I pull the trigger on this.
Thanks again guys!

Quote from: badboy2k on 20-September-14, 01:42:30
do not flash your new one with the others VBIOS version (If you need one for it come and ask us for one as different batches need different versions as the VRAM may be different)!
I would never do that! I probably won't even flash the other one if it's not necessary.

New software for the 5508 controller -when?

Hi,
Anyone have a clue when the new software for the 5508 controller is going to be released?

I hope they have resolved the bug CSCte01087 present in software 6.0.188.0. since my 1252 can't associate to the controller i had to downgrade to 6.0.182.0.

Need software for Intel ESB2 SATA RAID Controller for Windows 2012rR

I have installed Windows 2012r2 on my HP XW8600 and I found the software for the LSI Adapter (SAS 3000 series) but I am unable to find the software for management of the Intel ESB2 SATA RAID controller. The only software I could find was listed as a Windows 7 application but will not install onto my Windows 2012r2. Thank You

That looks exactly like the software I tried and an error reported this software will not install on this platform. I will try again tonite and see what happens. I will test all the apps on that list starting with the latest and see what happens. I thank you for your help.

SLI - Can I use two different video card versions for SLI?

Hello,
Can I use two different generations of MSI video cards that implement the same GPU for SLI?
The two video cards are:
MSI N260GTX-T2D896-OCv2 GeForce GTX 260 896MB <-- What I currently have
MSI N260GTX-T2D896-OCv3 GeForce GTX 260 896MB
MSI N260GTX-T2D896-OCv4 GeForce GTX 260 896MB
The main difference between these three seems to be that the OCv3 has two fans and a different heatsink than the OCv2. The OCv4 has one fan like the OCv2 and but it is located in a different location and some weird spikey heatsink thing going on. I already have the OCv2 but I am looking to get another card for SLI and newegg doesn't sell the OCv2 anymore. The important thing is that I am looking for is stability and it seems that the most ideal setup would be to get identical cards.
By the way, why are there so many versions (updates?) to this card? Have there been issues related to the card that necessitate a revision?
Thanks

Different coolers(HS and fans) and possibly different makers of vRAM. But, you should be able to run SLI without issues regardless of the versions.

MSI Big Bang-XPower II SLI question

Hello. I have a MSI Big Bang-XPower II with two cards in SLI. The cards are cooled using AIO water cooling brackets which makes them take up three slots each instead of two. I would like to add a third card with the same cooling. The manual says that for 3-way sli I should use slots 1,3 and 5 or 7 as they are all PCIe 3. My processor doesn't do PCIe 3 so I leave it in PCIe 2 mode. My question is, could I set up the SLI configuration using slots 1, 4 and 7? Would it run at 16/8/8 in pcie 2? Or would the 4th slot not be usable for sli?
Thanks

No, that is not possible. PCI_E4 is a gen2 slot limited to x4. SLI is disabled once a slot used is at less than 8 lanes. Follow the Multi GPU support table on 1-21 of your manual.

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

Re-install software for the C6280 all in one printer... get an error message "can't find file"

need to re-install the software for the c6280 all in one printer. downloaded the latest install package from the HP web site. During the install process, I get an error message .. can't find user/appdata/local/temp/7z256315/setup/.....setup/blocksysuser........
the folder 7z256315 does not exist on the HD.
I also get a message that it can't find PS_A10_02_software.msi.
Windows 7 , C6280 all in one printer. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via wireless to the router.
hope you can help
thanks
charlie
This question was solved.
View Solution.

Hi cberistain,
Follow the steps below, and let me know what happens?
Step one: Clear temp directory
Type %temp% in the run or search for programs and files field
Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-77039-1&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know if you are able to successfully install the software and driver, and are able to print & scan?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

MSI Fan controller software for SLI ?

Similar Messages

Maybe you are looking for