Msi fatal error in windows 8

I lost the ability to scan from my PC. I tried to reload the software and drivers from a current windows 8 CD for the c410 but got msi fatal error message 1406 during the install. The software finished loading but I no longer have the HP Solution Center on my PC so I can't scan but am able to print. When I went to HP support, there are solutions for this error message for all windows operating systems except windows 8. Is there a way to repair this error in windows 8?

Hello mike9905,
Welcome to the HP Forums.
I see that you are having an issue with a fatal error when attempting to install the printer.
Please click on the following link for A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

ODBC Driver raising Fatal Error on Windows

Dear Friends,
I am facing FATAL Error Exception C5 from 8.1.6 and above oracle clients on windows 9X/2k/XP from VFP7/8. Error does not occur @ very first sqlexecute statement. It occurs at any no of statement. When user goes thru Foxpro Debugging mode it occurs with less frequency.
It is working fine with Orcle Client 8.1.5.

Hi, I also have a similar problem.
I use oracleinstantclient 10.1, and sometimes I get C5 in VFP9 when calling a procedure on the server using ODBC.
I looked on the forums and I found that one way to solve it is to not send <?variables> to ODBC driver, ex:
instead of
{CALL PACK_MG_EVOLUTIE.GEN_MG_INDICATORI(?lcSchema, ?lnMonth1, ?lnYear1, ?lnMonth2, ?lnYear2, ?lnType, ?lcMessage)}
use
{CALL PACK_MG_EVOLUTIE.GEN_MG_INDICATORI('SCHEMA_NAME', 6, 2005, 6, 2005, 1, 'MESSAGE')}
That solved my problem, but now I use oracleinstantclient 10.2 and I get
1526 Connectivity error: Unable to retrieve specific error information. Driver is probably out of resources.
Has anybody encountered the same problem?
I want to use instantclient 10.2 because I got the odbc installer to work on Windows 98.

A fatal error with Windows Server Backup

Hey,
I'm trying to backup my Windows Server 2008 R2 (physical server). Windows Server Backup tool crashes when I start to start it. It gives me error "A fatal error occurred during a Windows Server Backup snap-in (Wbadmin.msc) operation. Error details: The
Windows Server Backup service has stopped.
Errors I get to event viewer:
ASR Warning: Failed to collect disk information for ASR Backup. Reason: Unable to obtain disk information for device 14 (Win32 error code 0x1).
ASR Warning: Failed to collect disk information for ASR Backup. Reason: Unable to obtain disk information for device 10 (Win32 error code 0x1).
ASR Warning: Failed to collect disk information for ASR Backup. Reason: Unable to obtain disk information for device 3 (Win32 error code 0x1).
ASR Warning: Failed to collect disk information for ASR Backup. Reason: Unable to obtain disk information for device 1 (Win32 error code 0x1).
The following process dump file was generated:
C:\Program Files\DebugDiag\Logs\Crash rule for all instances of wbengine.exe\wbengine__PID__9716__Date__07_04_2014__Time_03_08_24PM__911__First chance exception 0XE06D7363.dmp
These devices (disks) that are showing in warnings arent initialized from Disk Management. If I open Disk Management, it always pops up prompt to initialize disks. I havent initialized these disks cause I already have them in use, but Windows regonizes those
disks twice cause I'm using multipath. I shouldnt initialize one physical disk twice.
I think seeing these disks twice is crashing my Windows Server Backup. Is there a way to disable specific disks for Windows Server Backup? Can I disable those disks somehow, so Windows Server Backup wouldnt see those disks twice? Or can I somehow tell Windows
that its seeing my disks twice, and there is actually only one disk instead of two.
Greetings,
Niko Turunen
Finland

Hi,
How did you configure the disks by using multipath? The ASR component is a system-critical component that is reported by the ASR writer. Every fixed disk on the computer is exposed as a component in ASR. During backup, the requester should include all fixed
disks.
For more detailed information, please refer to the articles below:
Using VSS Automated System Recovery for Disaster Recovery
http://technet.microsoft.com/en-ca/aa384630(v=vs.80).aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to resolve this Fatal error on windows 8.1

HI,
Fatal error encountered during installation.
The installer will now cleanup and exit!
c:\oracle\Middleware\jdeveloper\wlserver_10.3\common\
bin\console.exe(Accesss is denied)

I found the solution. I did some research and found references to deleting the caps.db files under older versions of Windows. I did find a caps.db file under C:\Program Files (x86)\Common Files\Adobe\Backup. I deleted the file, and then right-clicked the setup file and used "Run as Administrator" (didn't do that the first time), Everything installed fine, except for an error message with Adobe Flash CS4. But so far, the programs seem to work fine. BTW, Adobe Reader 11, Photoshop Elements 11, and Premier 11 came preinstalled with my computer), which may have created some conflicts.
For what it's worth, Adobe's own website indicates that there are no known issues with Windows 8.1 for CS4 (http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.html).

Fatal Errors with Windows Integrated Server

Every once in a while - 3 or 4 times in the last 3 hours I get a fatal error on the server. The last part of the server log looks like this:
08/03/13 14:27:59 WARNING: ExecutorService.inform Unknown event state3 Ignored
08/03/13 14:27:59 WARNING: ExecutorService.inform Unknown event state4 Ignored
08/03/13 14:28:12 WARNING: ExecutorService.inform Unknown event state3 Ignored
08/03/13 14:28:12 WARNING: ExecutorService.inform Unknown event state4 Ignored
08/03/13 14:28:13 WARNING: ExecutorService.inform Unknown event state3 Ignored
08/03/13 14:28:13 WARNING: ExecutorService.inform Unknown event state4 Ignored
08/03/13 14:28:15 BASE URL IS: /SOAConsole/faces
08/03/13 14:28:16 BASE URL IS: /SOAConsole/faces
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d80f244, pid=5376, tid=2388
# Java VM: Java HotSpot(TM) Client VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# V [jvm.dll+0xcf244]
# An error report file with more information is saved as hs_err_pid5376.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Process exited.
I'll be happy to include the error report file if that is helpful

I'm sorry I have not been able to determine what caused the errors. In many cases I didn't actually notice it until I went to try to use the console or worklist and found the server was down. I then looked at the log to find the error. There was at least once when I was just navigating the console and it died, but I don't ermember exactly where. Nothing I hadn't done before. I'll try to pay more attention.
I just restart the server to recover.

BGBISAPI.msi fatal error 1603

Hi,
I am setting up a test SCCM 2012 environment and have a primary SCCM server up and working and deployed 2 Distribution & Management point servers fine however when i go into SCCM, Monitoring, Site Hierarchy when I right click my site it shows a load
of failures, for each of my 3 servers i have 2 errors reported every 60 minutes,
Message ID 1016 and- site component manager failed to install this component of this site system
Message ID4951 - Site Component Manager Failed to install this component, because the Microsoft installer for this component (bgbisapi.msi) could not install
When I look at the bgbsetup log file its showing
bgbisapi.msi exited with return code 1603
Fatal msi error bgbisapi could not be installed
I have done a lot of research into this trying a host of stuff and it wont install, any help much appreciated

I had this same issue on another thread.
other threadI worked with a Microsoft engineer on the case. The issue is now resolved. The problem was due to the server not being part of a local security group that caused it to not install a function. We reviewed several logs to isolate
the problem. The Microsoft engineer approached this from a "what is the expected outcome" rather than just the specified error code. Before this was fixed all of my EU desktops were showing up inactive and with no inventory, and no historical data.
Now everything works properly.
Details below
Had Microsoft review my settings on support call
confirmed boundaries were correct.
Discovery groups and settings are correct.
Secondary site settings and roles are correct.
Overall health of SCCM is correct.
Site hierarchy is correct
Server installation procedure is correct.
Server SCCM patch installation is correct.
Site to site functions are correct, however we have to double check logs to make sure all components are correct. Since imaging and remote controlling are functioning there might be a component error as initially suspected.
We isolated a machine in one office, and reviewed log files (inventoryagent.log and others)
confirmed that the machine is sending it logs files to management point.
We then took a look at log files on the servers to further isolate the issue.
<PROBLEM SECONDARY SITE SERVER>
U_ex***.log – iis server logs
Compmon.log – component information including installation
Perfsetup.log – performance counter information
Mpfdm.log - Moves client files to the corresponding SMS\INBOXES folder
Mp_Hinv.log to confirm that the mp is receiving and processing inventory
dataldr.log – logs .mif file processing for inventory on primary site
<PRIMARY SCCM SERVER>
dataldr.log – logs .mif file processing for inventory on primary site
dataldr.lo_ - logs .mif file processing for inventory on primary site
We noticed that the associated .mif file for the desktop machine was not present on <PRIMARY SCCM SERVER>. ( search on ConfigMgr\inboxes\auth\dataldr.box )
We reviewed additional logs and found errors in the
compmon.log files
We concluded that there is a communication error between <PROBLEM SECONDARY SITE SERVER> and <PRIMARY SCCM SERVER>, since the inventory logs were present and processing on <PROBLEM SECONDARY SITE SERVER>. Deeper analysis of the logs
pointed us to the root communication issue between <PROBLEM SECONDARY SITE SERVER>
Local administrators group was correct with <PRIMARY SCCM SERVER> and <PROBLEM SECONDARY SITE SERVER> added.
The sitecomp & compmon logs were reviewed further and we found some additional issue with components not installing fully.
Per one of the logs we see a failed installation and a removal of the server from a local group.
<PROBLEM SECONDARY SITE SERVER> was being removed from a local group – SMS_SiteToSiteConnection_[SITECODE]
We added the server back to the group and restarted the SMS_SITE_COMPONENT_MANAGER service.
Once this was restarted we reviewed the logs again.
<PROBLEM SECONDARY SITE SERVER> started processing and completing any installation of missing components. Exit codes-0 for completed installations.
Sender.log started showing progress in transmitting the inventory and collected data from the workstations.
Results
BGB installed correctly.
<PROBLEM SECONDARY SITE SERVER> – shows green status in component settings in SCCM Console
Refreshed the SCCM Console on <PRIMARY SCCM SERVER>
<SECONDARY SITE> machines were now listed with the correct management point – <PROBLEM SECONDARY SITE SERVER> and are now showing as active.
Software deployment status has been updated for EU offices.

FATAL ERROR occurred during installation

Trying to install a HP Officejet 4500 G510g-m onto a HP Desktop PC with Windows Vista.
Error message reads:
Fatal error message during installation
An error occurred during installation of assembly
'Microsoft.vc90.MFC,version="9.0.21022.8",publickeytaken=1fc8b3b9 a1e18e3b",processor architecture="x86",type="win32".'
"Fatal error"
"MSI.netdevicemanager40"
Error logs reads:
+0000000000000958722048/s/Now launching=x:/hpzmsi01.exe -m netdevicemanager40 -I xxx -f 'x:/hpwwins26.dat" - validate No at" -validate No
X:/Network64.msi failed with return code 1603
When searching for the code 1603, I found a trouble shooting number (c02455020)
When I run the program regsvr32 Atl.dll it came up with
DII Register Server failed with error code 0x2002801c
But the com product was already registered, the computer has been re-started 12 times. So I cannot understand why I cannot install the complete printer, why is telling me that only the basics can be installed. I purchased and ll-in-one because I need it all not just a printer.
Be so kind to enlighten me.
My father's patience has ended, and before he packs it back into the box, I am willing to troubleshoot it with you.
Please help.
Thank you.

Hello Techiizz
Try the following article. It covers the Fatal Error 1603 and should help resolve your problem.
MSI Fatal Error 1603
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Dreamweaver CS5 Fatal Error XML Parsing

Can anyone help me with CS5 dreamweaver - It has a fatal error on windows 7 - it states XML Parsing fatal error an exception occurred, Type: unexpected of exception message: the end of input was not expected, line 22 file: c\users\danny\appdata\roaming\adobe\dreamweaver cs5\en_us\configuration\workspace\designer.xml.
I cannot use dreamweaver at all - PLEASE HELP ME. Thanks

The xml file which defines the Workspace layout has become corrupt.
Navigate to the file via the path listed in your post, delete it and relaunch Dreamweaver.
http://forums.adobe.com/message/2124385
If Dreamweaver still won't launch. delete the entire Configuration folder. Dreamweaver should then create a fresh Configuration folder the next time you launch it.
Locating your personal configuration folder
http://forums.adobe.com/thread/494812

HP Laserjet Pro MFP M125A " A Fatal Error Occured Preventing Product Use" on Window XP SP3

Dear Friends,
I really need your help on this issues, recently company that i been working buy 19 Unit of HP Laserjet Pro MFP M125A printer to be install at our 19 branches. All of our branches is using Window XP SP3 and the spec is exceed the minimum requirement stated at the box of the HP Printers which means by rights, it should be no problems.
However, I sent and setup the printer at 4 branches only 1 is a success. others 3 centre is showing the same errors which is A Fatal Error Occured Preventing Product Use. I been trying to install using original CD provided by HP and driver provided at HP Support also given the same errors. The 1 Centre that OK PC spec is almost the same as the others 3 and all using default programs and software. So i dont knows what really is the problem.
This is the things i have done in hoping to successfully install the driver but WITH NO SUCCESS:
Clear temp file, disk cleanup, defragment disk and restart PC.
Reinstall Windows SP3 and restart PC.
Install basic driver only and using control panel > device and printer > add printer (Select Driver Manually). (See Pic Below)
Repair windows using original windows XP SP3 CD.
Re-Check for USB.INF file.
Repair Registry with reg cure.
Uninstall USB support and etc (Google), then re-install the printers.
Uninstall Antivirus, disable all startup and services.
Install using FULL DRIVER, BASIC DRIVER AND DRIVER MANUAL.
Sometime when running the installer, it will prompt the below error signature and HP installer will loading quite long and then crash, but others PC don't have this errors, it straight away to the installation menu until DETECTING PRINTER until 99% and shows errors "A Fatal Error Occured Preventing Product Use".
It seems that almost everythings i try cannot make the printer driver to be install. However, the SCAN driver is install successfully. Currently the printer only can PHOTOCOPY AND SCAN, without being able to print.
Please anyone which facing similiar issues to HELP ME. anythings i can do, to install the printer DRIVER.
THANKS!

Hi @gendit ,
I see that you are having issues installing several Laserjet Pro MFP M125A printers on several Windows XP computers. You are getting "A Fatal Error Occured Preventing Product Use". I can help you with this.
What version of .NetFrameworks do you have? Check Your DOTNET.
You might have to run the Windows Updates. I would update the .Netframeworks to 4.0.
I believe HP software piggy backs Internet Explorer. Should have at least Internet Explorer 6.0.
Please try these steps, most likely the wrong driver is getting installed, giving you the Fatal error.
Disconnect the USB cable.
Uninstall the printer software from the CD.
Run the software again, immediately after connecting the USB cable, follow this document to update the driver before it errors out again. A Fatal Error Displays During Software Installation.
If the issue persists, here is a document with some different steps to try.
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Officejet Pro All-in-One L7780 Printer installation fatal error "MSI.MSI_BPD.Scan"

Hi,
I run my laptop (an HP Probook) on XP and have was having trouble printing from Word and thought a good starting point would be to check the printer driver was complete and working by uploading the driver from the HP website.
However, on trying it I received the fatal error message "MSI.MSI_BPD.Scan" saying that a more recent version was already installed (dspite my having used the HP web-site).
The HP fix "HP Installation Error - XP" was automatically insatlled on my desktop, but didn't fix it. (The laptop did re-start as part of the process.) Part of the fix was to erase the previous version. However, after going through the process a second time it still didn't work.
Could it be because I used a different target directory for the upload, or is it something else?
Many thanks in anticipation of your help!
Nick
P.S. I did try the HP Print Diagnostic Utility v5.0 and the printer isn’t recognized (as being there at all) and on clicking the “get drivers” (or something like that) button the process appeared to repeat that above: everything loaded and then – nothing!

Hey Nick,
Check out this document to see if it is able to walk you through solving the fatal error. A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
If this does not help post back with any new details and we can continue from there.
Best of luck!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Problems installing photosmart b110a on Windows 7 64-bit - FATAL ERROR in driver installation!

Hello,
maybe that you can also help my with the installation of the driver software for my B110a on my Windows 7 64-bit Enterprise Edition Laptop. I downloaded the driver software from:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-82451-1&cc=de&dlc=de&lc=de&...
I tried it several times, including the HP Installation Error - Windows 7.hta guidance. Actually I've already installed a lot of printers on PC's in my family - i've never experienced such a problem...
I always ended up with a "fatal error" :
1. fatal error:
2. error information send to HP:
3. details / error situation code:
Any help is highly welcome and appreciated since I am quite desparate in the meantime - after trial & error for more that 3 hours... ;-(
Many thanks in advance & best regards from Switzerland, Dominic
Dominic Rihm
[Personal Information Removed]
This question was solved.
View Solution.

The fatal error you got with the B110a is caused by an .msi error. The document below should walk you through that.
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
The fatal error you got with the B109a might have a different fix. It would depend on the exact error code you received. The document below should help you find the error code and work through the fatal error.
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Fatal Error: Failed to open handle for AFLVCG61.msi

Fatal error occured while installing Device Drivers CD. I have no clue Help.
Message says Failed to open the handle for D:\components\max\AFLVCG61.msi.
And, the details says:
K:\NIInstallers\dev\1.1.2\src\UberInstaller\IniFileInfo.cpp(968): IInstallerError 11002
Fatal Error. Failed to open handle for D:\components\max\AFLVCG61.msi.
Failed to open database handle for D:\components\max\AFLVCG61.msi.
Msi Error: 110
Error Record:
Exception code: E06D7363 ()
Fault address: 7C59BBF3 0001:0002ABF3 C:\WINNT\system32\KERNEL32.DLL
Registers:
EAX:00FEF1D8
EBX:0041E507
ECX:00000000
EDX:0000000C
ESI:00FEF268
EDI:00FEF1F8
CS:EIP:001B7C59BBF3
SS:ESP:002300FEF1D0 EBP:00FEF228
DS:0023 ES:0023 FS:003B GS:0000
Flags:00000206
Stack Trace
Address Frame LogicalAddr Module SymbolName + Offset
7C59BBF3 00FEF228 0001:0002ABF3 C:\WINNT\system32\KERNEL32.DLL RaiseException + 86
004C3160 00FEF268 0001:000C2160 D:\setup.exe
0041E5CC 00FEFA5C 0001:0001D5CC D:\setup.exe
0044DA59 00FEFB40 0001:0004CA59 D:\setup.exe
0043EAE0 00FEFB84 0001:0003DAE0 D:\setup.exe
004402BF 00FEFCDC 0001:0003F2BF D:\setup.exe
00463C4B 00FEFD84 0001:00062C4B D:\setup.exe
00463D46 00FEFDA8 0001:00062D46 D:\setup.exe
0046B4A1 00FEFDF0 0001:0006A4A1 D:\setup.exe
0046B55E 00FEFF18 0001:0006A55E D:\setup.exe
004EB185 00FEFF80 0001:000EA185 D:\setup.exe
004C8EED 00FEFFB4 0001:000C7EED D:\setup.exe
7C57B388 00FEFFEC 0001:0000A388 C:\WINNT\system32\KERNEL32.DLL lstrcmpiW + 183

Hi LegalEngineer-
Which operating system are you using? It seems like either you got a bad Driver CD disk or that your Windows Installer might need to be updated.
You can find updated driver downloads for all NI hardware at Drivers and Updates at ni.com. I generally prefer this method because it avoids installing unnecessary software and also ensures that all drivers are up to date.
Regards,
Tom W
National Instruments

Fatal error installing bundle (MSI)

I have an MSI file that I built using Admin Studio for Zenworks. I am on ZCM 10.3.3
Running the MSI by itself it works without issue, but if I try to run that bundle from Zenworks, I get a fatal error every time. I tried setting it up as a UNC path, and even uploading the MSI file.
When I look at the windows logs, I see this.
Product: Samsung OfficeServ Communicator -- Error 1310.Error writing to file: C:\Windows\WinSxS\Manifests\x86_Microsoft.VC80.Deb ugCRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_d014c028.cat. System error 0. Verify that you have access to that directory.
I checked the directory, took over ownership, and tried again. Still failing. Why is this not working via Zenworks?

Well, you still have Win7 issues, those can be researched.
Process Monitor may help track down the issue.
See who is doing the writing and see who owns the process that is doing
the writing.
On 12/7/2011 10:16 AM, motc7 wrote:
>
> craig_wilson;2159347 Wrote:
>> As Anders said, It's not an issue I've seen reported before or at least
>> not a general issue.
>>
>> Something is Blocking Windows Installer.
>> Knowing the Impersonation under which installer is running, the
>> parameters used by the installer, etc.. etc... will help determine why
>> the installer is being blocked when ZCM launches it.
>>
>> It's not ZCM itself trying to write to those locations.
>>
>> On 12/7/2011 9:13 AM, Anders Gustafsson wrote:
>>> Motc7,
>>>> I could update to 10.3.4, but is this a known problem with
>> something
>>>> other than 10.3.4?
>>>
>>> Not that I know of, but I know there are a lot of fixes in 10.3.4,
>> not
>>> to mention 11.1. Meanwhile, try Craig's suggestions (above)
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>> human.
>
>
> I think we can close this for now. I built this package on a WinXP
> machine, and I did try to launch it separately and it worked. But only
> on the XP machine. windows 7 machines it fails with the same message I
> originally posted. Sorry to trouble.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

I am trying to uninstall itunes as it will not open error 7 (windows 126) so that I can reinstall but keep getting the message.. The feature you are trying to remove is on a network resource that is unavailable itunes.msi... Any suggestions anyone

I was unable to open iTunes and got a message error 7 (windows 126) so I tried to uninstall and download latest itunes 10. When I tried to remove old version of itunes I got the message... The feature you are trying to remove is on a network resource that is unavailable and when I try to download iTunes 10 the message reads.... The installation source for this product is not aailable. Verify that the source exists and that you can access it. Can anyone help?

A msi file is short for microsoft installer. It normally is for installation, removal, and maintenance for a program. So iTunes.msi would be used for the updating of the program. For some reason it isnt finding this so we can't update, install, or remove it.
From what I have seen windows installer cleanup utility solved related problems before.
I found this forum about removing and installing a new iTunes. It was about someone who was trying to isntall iTunes, and was looking for msi file and asked for help. Using this should allow you to be able to install iTunes. It won't give you the msi file but will allow you to isntall iTunes over again.
This was what was said.
Another option in case you can't get an msi. (Or even if you can ... the msi's mentioned in the messages may be damaged rather than missing.)
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Restart the PC, and try another iTunes install. Does it go through properly this time?

RC-50004: Fatal: Error occurred in ApplyAppsTechStack: While Installatling EBS R12 on window server 2003 SP2

Hi Mr.Hussain,
Can you please guide me how to solve this error,
i am trying to install oracle EBS R12.1.1 on windows server 2003, i am following your document, installation of EBS R12.1 in windows server 2003 SP2
i did stage everything going right, even i did md5sums for the extracted file of EBS R12 folder.
i stated installation, even installation done perfectly at the end of installation 2 Command Prompt windows appear and stopped, i try to open log file from oracle installation folder, i got this message at the end of log file
3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver c:\oracle\PROD\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for PROD instance
can you please guide me how to solve this error,

This is a generic error so you would need to check the installation log files for details about the error.
Please see if (Rapidwiz 12.1.1 Fails To Execute Ouicli.Pl During Apps 10.1.3 Techstack Autoconfig (Doc ID 1328464.1)) is applicable.
Thanks,
Hussein

Msi fatal error in windows 8

Similar Messages

Maybe you are looking for