MSI FX 5200, in game 3d objects corrupted after installing latest driv

VGA : MSI Geforce FX 5200 TDR 128
I installed the driver for my vga card from MSI official site.
after installing all in game 3d objects are corrupted.
the version of the new driver is 4403.
why this problem occures?
how do i can fix it?
offcourse vga card works properly with the previous driver.

which version driver that you download from MSI Website...?
try download MSI version 4403...not the Nforce version 4403.. i dont face any problem with the MSI Version 4403
MSI K7N2 DELTA-L
AMD ATHLON XP 2200
MSI FX 5200 VTD 128MB
COOLERMASTER X-DREAM HSF
2 X 256MB DDR RAM GEIL PC2700
CREATIVE S.B LIVE 5.1 SOUNDCARD
MSI 52X CD-ROM
LG CR-WRITER 24X10X40X
FLOPPY DISK
56K MODEM
40 GB HDD SEAGATE BARRACUDA 7200RPM
10 GB HDD MAXTOR 5400 RPM
450 WATT PSU WITH 2 FAN

Similar Messages

Game does not start after installing on mac pro

Game does not start after new install on mac pro ?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

ITunes corrupted after installing iLife 08

I can no longer launch iTunes following install of iLife 08. Error message says "copy of iTunes corrupt or not installed properly" "Re-install iTunes".
Is teh solution as simple as downloading iTunes 8 from the Apple site? How might this affect my existing iTunes library and authorization?

Same here. I recently had a memory module go bad and a bunch of stuff got corrupted, so I had to wipe the disk, install new memory, and reinstall everything starting with OS X. Since all of my old iLife apps were gone (They were not on the disks I got with the Mini), I had to get iLife '08.
Before I installed iLife '08 I recovered my iTunes library from my 30 GB video iPod using TinkerTool, and it all worked fine. After installing iLife '08, I got the "iTunes is corrupted or not installed correctly" error message (Oh NOES!!!11!!).
All you have to do to fix this is, 1) Download iTunes 8.0.1 from Apple, and, 2) click on UPGRADE. Your iTunes library will still be there (Mine was, anyway).
Cheers,
George

Mavericks is corrupted after installing windows

I installed windows 7 home premium a few days ago, like 2 i think, and then i downloaded a game aon the windows side and now i want to use mavericks again. I restart the mac and now mavericks keeps booting up with a loading bar and shutting down halfway. If i use disk utility, it says mac is corrupted. When i repair it, it cant repair it. I dont have a backup of mac because time machine never works, and i dont know how to use it. Any help? This is the second time its happened and i am not wiping the hard

A Mid 2010 Macbook pro
MacBook Pro 7,1
i dont know much abot mac os x, so 2. Was a no. Never heard of it either
i actually installed Final Fantasy XIII-2 and played it for half an hour before switching to mavericks, with mavericks working. Two things i think may have causd it would be either
1. Holding down power button while mavericks was booting up a few times because i missed the alt key when booting
2. Windows update?
The only thing i did after the restart was install, then reinstall a windows 7 theme. Install xbox 360 controller for windows, a directX patch (installed before and mavericks worked so not directX) and a few more windows updates.
sorry for any typos, a ipad mini isnt very fast.

OpenGL games fps going down after install Windows on RAID 0 on K9A2 Platinum

Hello .
Description of problem :
The problem was showed right after installations Windows on RAID 0.
When I had one HDD, the problem was not.
The problem was showed on both integrated RAID controllers (both on SB600 and on Promise T3).
When I play games (just games in OpenGL!!! for example conter-strike 1.6, Quake3, on Direct3D such problem is not present), and simultaneously I copy (or other users on FTP:)) a plenty of small files, game frames per second going down.
If to stop copying in current of minute, frames per seconds goung up.
If in 2-3 minutes, will help only restart game.
Processor type: "AMD Athlon 64 X2 4000+ (Brisbane)"
Motherboard: "MSI K9A2 Platinum, AMD® 790FX and SB600 (+ Promise T3) Chipset, AMI BIOS v1.3"
RAM: "Samsung 1GB 800MHz DDR2 Non-ECC"
HDD: 2x in RAID 0: "Samsung HD501LJ 500GB 7200rpm 16MB with NCQ Serial ATA II-300"
Video: "XpertVision NVidia 8800GT 512Mb"
Power supply: "FSP ATX-400PNR 400W ATX 12V v 2.01 20+4 pin passive PFC 12cm fan Noise Killer"
Operating System:
Windows 2003 server 32bit
Windows Vista Ultimate 32bit
I have established last version Dual Core Optimizer.
Tried to clean in boot.ini a key /usepmtimer and reboot has helped nothing.
The similar problem was on absolutely another motherboard (Biostar nForce570SLI) and hdd (Hitachi 80GB) with the same processor and Windows. But , installation Dual Сore Optimizer and a key/userpmtimer has helped.
What reasons of a problem?
How to eliminate a problem?
In advance thanks for the answer.

Oops, missed the PSU....
Quote
But why when copying to stop in 3-4 minutes, game fps not going up.
In fact after copying files system resources are not used, also reading and writing from a disk does not occur.
I understand that at copying Soft-RAID use some system resources. But when system resources not use game fps not going up.
Will help only restart game!!!
Quote
The problem was showed right after installations Windows on RAID 0.
When I had one HDD, the problem was not.
See that? You went from single disk to RAID and then the problem started...... I guess it's not very hard to conclude that one is related to the other. Just try to use single disk again an and see what happens.
Then: did you have two disks installed before going to RAID-0? Or did you add one disk for that? If so, then your PSU may be the troublemaker, not providing enough juice to feed all devices.
About your English: it is fine, don't worry. We do not mind, as long as it looks like English and we can understand it and as long as there's no MSN-crap in it... so, you are doing fine.

Lightroom 1.4 catalog corrupted after installing/uninstalling 2.0

Hi all,
I have about 10,000 images in my catalog, including thousands of edits made in the last week. I installed version 2.0 yesterday, but because of numerous problems (very slow, slider problems, etc) I got rid of it and tried to revert to 1.4.1
Unfortunately, ever since doing so, somehow my database has become corrupted and I can't regularly export catalogs. Sometimes they work, most times they don't. Most of my edits are very substantial and I've spent days working on a few of them so I can't risk anything major. I never had the opportunity to backup the catalog either (backups were turned off by default on this install).
SO. Is there ANY possibility of un-corrupting this database or have I just lost months of work keywording ?

Which is fine, but it's the version 1 catalog that has corrupted. I deleted the version 2 catalog after removing the software from my PC. I'm able to navigate within my catalog and make changes, etc, but exporting anything is hit or miss, and more hit than miss. If I choose to export x number of images as a catalog it will start the process, but within about 3 or 4 seconds will error out saying "Lightroom wsa unable to export the catalog. Unrecoverable error when generating export catalog." Nothing further to aid in troubleshooting.
This never happened before I installed the new version of the software. V2 seems to have modified it in some way upon import, or else co-incidentally something else happened to it at the same time. Either way, I can't export several groups of altered Nikon NEF images. I tried exporting the catalog without including the actual image files but no-go there either. The originals are safe (thank goodness), but the edits can't be moved, and some of them took hours of tweaking to accomplish.

MSI Gaming App Not Working - Fails to open after install - Want to use OC mode

Hi, well today I just recovered my GPU from a near fry using MSI Afterburner. Luckily, with help from a moderator on this site, I was able to get it working again. I thought I fried it trying to OC it. I simply want to be able to switch between the modes it is supposed to come with. I have a MSI R9 290, and it is supposed to be equiped with 3 easy "one click" toggling between OC modes, 1007MHz, Gaming mode, 974MHz, and Silent Mode, 947MHz.
I cannot figure out how to switch between these modes. I used Afterburner and nearly fried my card. I was told not to use that, that is for advanced users, to use instead the (supposed to be bundled, but was not included in my install) MSI Gaming App, to easily switch between the 3 different modes. I downloaded the MSI Gaming App (http://download.msi.com/uti_exe/gamingApp.zip) and installed it. When I tried to run it I get this error:
======
[MSI Gaming App]
The platform does not support this application
(OK)
======
So what does this mean, that the Gaming App is not supported by Windows 7 64Bit Professional (which is what I have)?
Am I doing something wrong, did I install the wrong application. I could not find any others however.
So I damn near fried my GPU trying to use Afterburner to OC my GPU, and I am very hesitant to try using it again. At this point, I have not even reinstalled Afterburner as I fear it might, just by installing, screw me up again.
What should I do, is there anything I CAN do?
Please help this noob- Thanks for your help!
-Kris

based on S/N the card is generic, AMD reference one
those cards don't have factory OC:
http://www.msi.com/product/vga/R9-290X-4GD5-BF4.html#hero-specification
http://www.msi.com/product/vga/R9-290X-4GD5.html#hero-specification
http://www.msi.com/product/vga/R9-290-4GD5.html#hero-specification
http://www.msi.com/product/vga/R9-290-4GD5-BF4.html#hero-specification

Windows 7 Corrupted after installing new keyboard

Installed a new keyboard on my Dell 1525 Inspiron computer. Good news the new keyboard works perfectly, bad news, Windows 7 will not launch. I have run the diagnostics and it all says it is fine. I have run the recovery mode and auto repair, and it comes
up and says a recent hardware installation should be removed and try again. So I removed the new keyboard and reinstalled the old keyboard, but did not fix it. Try going back to a previous backup and it did not fix it either. Now what? Should I reinstall Windows
7? I don't have a recovery disc or the original disc since I upgraded from XP to W7 by downloading it. I hate spending $90 dollars on new software as old as the computer is, but it still works really well, which is why I bought the keyboard. Help!!!!!

Hi BeckyLaWR,
Is the keyboard a USB device ? Have you tried to choose the "Last known good configurations" option to have a check ? Does machine boot well without the new keyboard ?Can we boot into safe mode ?
There is a possibility that the driver installed for the keyboard is corrupted.It is recommended to download the driver from the manufacturer website for the new keyboard.
Best regards

I cannot access Yahoo Games on my Mini after the latest Java upgrade. This has happened before. Any ideas? Thanks!

When I try to access Yahoo Games Bridge the system will not allow me to download the applets necessary. This has happened before after a software update and it is a complete pain. I can go back to a old version of Java but the security is apparently not good. Any ideas? Thanks!
Jack

Thanks lllaass but I have enabled Java. I did manage to get into the site by setting the Java security level to the lowest setting. There was a warning but it did let the site load after I excepted the risk. Thanks again!

MSI X99S MPOWER won't boot (Debug 00) after installing Transcend 256 M.2 SSD

Hey all, as the subject suggests I bought a new MSI X99S Mpower mobo. I put together a new system with it without any problems using my old SSD. I received a new M.2 SSD (Transcend 256 GB) once I installed it the system would no longer boot. I removed the M.2 SSD and the unit will now still not boot. I power on and the LED just displays 00.

what bios version you are using?
can you list the exact M.2 SSD (Transcend 256 GB) mode/part number?

MOVED: MSI X99S MPOWER won't boot (Debug 00) after installing Transcend 256 M.2 SSD

This topic has been moved to MSI Intel boards.
https://forum-en.msi.com/index.php?topic=254774.0

what bios version you are using?
can you list the exact M.2 SSD (Transcend 256 GB) mode/part number?

MAX 14.0 broken and database corrupt after installing LV2014 and latest device drivers

I have LV2012 and 2013 (both 32-bit) installed on my Win8.1 64-bit system and have used them without problem. I recently went through the agony of installing LV2014 32-bit from Dev Suite 2014 DS2 and the latest device drivers from the August 2014 DVD, and now MAX (v14.0) does not work. Firstly, it is slow to populate the System information display, secondly when I try to expand a tree I get a MAX Database Connection Error (see attached), and there is no software listed at all. Thirdly, devices are not listed properly even though appearing in Device Manager (eg. a CAN interface no longer lists CAN0 but does show the device but no configuration, same for USB DAQ devices I(see attached), and I do have CAN 14.0 installed), and there is nothing under Data Neighborhood.
Initial attempts to install LV2014 were prevented by the NI mDNS Responder and related services not stopping when required by the installer. This also affected attempts to repair MAX.
All 3 versions of LabVIEW run OK, but projects no longer include remote or RIO/FPGA hardware - possibly due to uninstalled support software - but without the software list in MAX I cannot tell what is and isn't installed.
I have performed a Reset Configuration Data, repaired MAX several times, uninstalled it (any all dependencies), turned of the firewall and virus software, and completely reinstalled LV2012, LV2013, LV2014, and device drivers, but with no change to the problem. I have now lost 2 whole days and I am getting desperate for a fix. Surely this cannot be the only case of this in the whole world.
Mike
CLD & Alliance Member, UK
Solved!
Go to Solution.
Attachments:
MAX problems.jpg ‏218 KB
NI mDNS errors.jpg ‏102 KB
MAX Devices.jpg ‏83 KB

Hi Dr.M
In order to workaround and repair your MAX problems , please see the following article (the Knowledge based article mentionned in the error):
I know you have been through a couple of these steps , but there may be some related links that could help as well.
http://digital.ni.com/public.nsf/allkb/B9107A7F281F9B408625720B0078E5A8?OpenDocument
As for your installation errors:
This error happens when a service gets hung up in a "stopping" state that does not allow the installer or uninstaller to remove it. This can happen with a number of different services, but it has appeared to happen mostly with the Lookout Citadel Server (lkcitadel server) and National Instruments Time Synchronization (lkTimeSync).
-To resolve the issue, open up the Services application by going to Start»Run and typing "services.msc" without the quotes. In the window that opens, find the service that the error message references. It will usually have a status of "Stopping."
-Double-click on the service to open the service's properties window as seen below.
-Try clicking Stop to stop the service. If this does not stop the service, set the service's type to Manualand restart the computer. It is safe to set the service to Manual because it will be started manually if it needs to run. After the restart, the service will not start automatically and you will be able to install or uninstall your software as necessary.
As for the devices not being visible have you downloaded the NI DAQmx drivers correctly(after installing LabVIEW).
Regards,
Mark
Applications Engineer Intern
National Instruments UK and Ireland

Font corrupted after install

Hi dear people,
I have a problem with installing a font in Mountain Lion (10.8.2). It is a TTF font called Segoe UI. The weird thing is that the preview in the Finder shows the font correct, but as soon I try to install it shows arabic looking characters and in is not locateble in the Font book. I validated the font and that showed that everyting is fine. I could used the font just fine with OS X 10.7.x. Any also had this with a font? Anyone has a solution for this beside choosing another font?
Already thanks in advance!
Henk Noppe

Segoe UI is a standard Windows OS font and should work OK.
If you go to TextEdit > Format > Show Fonts does it show up on the list for the All Fonts collection? If so, can you select it and type correctly?
Sometimes Fontbook does things which do not actually affect you ability to use a font as intended.

System lockups/video corruption after adding hard drive

I have a first generation MacPro with an ATI video board. I recently added a 1 TB Western Digital "Black" hard drive, and I used Carbon Copy Cloner to duplicate the first drive onto the Black HD, which is now my new boot drive.
Ever since I did that, my system has become quite unstable and locks up frequently. What typically happens is I'll get a garbled single row of pixels in random places on the screen, and then within a few minutes it will lock up if I try to do anything that is graphics intensive such as using Expose's active screen corders to show my desktop, or opening a folder with dozens of different icons (like the Apps folder). It /seems/ like the problem is compounded when I am using FireFox, but that may simply be because I use it alot.
After the lockup the only way to regain control of the machine is to hold in the power button.
I've even gone as far as removing the original drive thinking that perhaps the system might be confused and is pulling drivers or whatever from the old drive. That didn't help.
Any thoughts as to what is happening here? It's seriously driving me nuts (not to mention wasting a lot of my time constantly having to restart the system).

Did you run Disk Warrior before and after cloning?
Repaired permissions?
Re-ran 10.5.7 combo update?
I'd even look in system profile - memory and see if there are errors showing (doesn't show errors from prior system boots though).
Cleaned out the X1900; add copper cooling kit $29, or look into another ATI card.
Before using any new drive, zero it. And if you have Windows and the drive is backed up or before you put files on it --- do a complete and thorough zero and extended test in Windows using WD's own Diagnostic utility - much better, reliable, and does map out bad blocks while Disk Utility and other OS X tools rarely do. But any new drive... I've had 3 out of 6 need such treatment.
As a test, reboot back on your original why not? I'd have done that just to narrow down the possibilities.

Partition table corrupted after installing OSX10.8.3

I installed OSX 10.8.3 from the Mac App Store on Friday and after installing, my macbook rebooted and a grey bar appeared at the bottom of the screen like it was updating the EFI...
After waiting the bar to be full (apprx 45 minutes), it simply stopped...
I tried restarting and the bar reappeared... So I decided to reboot in Verbose and saw my disk being repaired once, twice, 3 times and then nothing more...
I then booted on my one week old clone on an external disk (thank god I had one) and checked the internal disk with the following :
Disk util (GUI)
Disk util (Terminal)
Testdisk and pdisk
Data Rescue 3
Everything seems ok with reading the information on the disk, but impossible to mount/unmount the OS X partition
But the partition table is not right...
I need to be able to use my computer so I might erase and reinstall everything today,
But if someone has an explanation to this mess I want to know it...
Macbook Pro early 2011
2.7GHz Intel i7
RAM 8Go

I tried burning the firmware updater to disc, but I when I try to boot from it, it says "No bootable device — insert boot disk and press any key.” This is with a an external firewire dvd burner. But I also tried the same disc with another MBP that still has its original internal superdrive, and I got the same error there. That MBP can boot from the Crucial SSD firmware disc though, so I don't know what the deal is.
I'd gotten rid of my bootcamp partition a good while ago since VMWare had been taking care of any Windows needs I had just fine, but I still had a Winclone backup of my old bootcamp partition. So I restored it to a new partition, booted into Windows 7, and installed the Intel SSD Toolkit. But every time I tried to run it, it just crashed on me. I watched it in the task manager, and it would appear in the process list for a while and then just disappear.
I've already ordered a bigger Crucial M4 to replace the X-25M (it was getting a bit full anyway), so I hope things go better with it. Thanks for trying to help though, everybody.

MSI FX 5200, in game 3d objects corrupted after installing latest driv

Similar Messages

Maybe you are looking for