MSI FX5200-T128[8917]Has 5200Ultra Chip

Hi,
Some where in this forum i saw that someone is talking about after removing the heatsink of 5200 and seeing it is 5200 Ultra ...It happened to me too...
My GPU is ought to be 5200 but under the heatsink it is 5200 Ultra
soo i need help about that how can i found vga bios for to turn its bios to 5200 Ultra's
and my xp drivers saying it is 5200, after i updated bios will it be turn to 5200 Ultra...?? it must be but is there any compability issues known by anyone ??
thanx for your time ...
Sorry for my english

I doubt you want to do that considering some of the parts on the board aren't the same as an Ultra board and so if you flash it to Ultra BIOS then you'll render it dead...
It's your board tho so if you feel froggy dive in I'm game to watch! heheheheh
You can't find a BIOS file for these except thru LiveUpdate unless someone saved it before the flash...
Bonz

Similar Messages

MSI FX5200-T128[8917]Has 5200Ultra Chip Will it need AGP Voltage rise

Hi,
Some where in this forum i saw that someone is talking about after removing the heatsink of 5200 and seeing it is 5200 Ultra ...It happened to me too...
My GPU is ought to be 5200 but under the heatsink it is 5200 Ultra
soo i need help about that how can i found vga bios for to turn its bios to 5200 Ultra's
My xp drivers saying it is 5200, after i updated bios will it be turn to 5200 Ultra...?? it must be but is there any compability issues known by anyone ??
And it is 5200 Ultra why it doesn't needs external power input[From PSU] like other Ultras have ?
If i rise the AGP voltage will it be helpful to use all power of 5200Ultra ?
thanx for your time ...
Sorry for my english

Since this issue is regarding a VGA card I'm moving your thread to the VGA Forum...
Bonz

VGA FX5200 T128 (8917) driver to support Linux OS

Hello,
Currently I am install red hat 9.0 (Linux) OS in my PC.
But I encountered problem when detect my VGA card driver.
(VGA FX5200 T128 (8917) driver)
Have anyone encountered before, please advise alternative solution.
Thank you in advance.
Regards,
vivaspeed

Quote
Originally posted by some body
See HERE.
vivaspeed Reply:
Hello,
Thank you of your reply,
but I am confuse which one I need to refer?
My processor is Pentium 4 and my VGA card is MSI FX5200-T128.
So which "Graphics Drivers" I need? Linux IA32 or Linux IA64?
And which "nForce Drivers"?
Should I need to upgrade my BIOS before I install the driver?
My motherbroad series is 875P Neo Series.
can please guide how to upgrade by manually (not LiveUpdate).
At tne meantime, I found another VGA driver from "www.viaarena.com/?PageID=296"
but is only provide for "AS IS" type. May I know is "MSI FX5200-T128" as same as "AS IS" type?
Thank you in advance.
regard,
vivaspeed
[email protected]

Need Cooling Fan For MSI FX5200-T128

Can anyone suggest a cooling fan to fit the MSI FX5200-T128.

Quote
Originally posted by cgrossi
man, for me to overclock my fx5200 t128, i fitted a coolermaster dp5-6j31c that i used on my 1800+.
Thats a pretty big heatsink. Doesnt it put strain on the AGP slot?

648F Neo + MSI FX5200-T128 + Celeron

Hmmmm... having som problems with Neo + FX5200 + Celeron CPU, it all works fin untill i install the Nvidia driver. the system works fine if i use a P4 478 CPU.
When the driver is install there is no picture, only black screen after loading windows.
If i install a MSI FX5600 there is picture and every thing works fin.
Anybody have a solution for this problem?? Then just buy som new hardware!
the Celeron CPU is a 2400 & 2500

Version 44.03 and the newst driver.
If i use a XFX FX5200 gfx card there is no problems only if you use the MSI FX5200 gfx card there is problems

MSI fx5200 T128

i bought this card but when i install the driver the system sometimes crushes out.
And an error message appers "system recovered from a serious problem".
what can i do?is there a general problem with this cards between the drivers which comes together?
please help!

everpower 300W PSU
512 mb ddr ram
gigabyte S648FX-RZ mainboard
p4 3.0E
ASUS cd-rom
msi fx5200 td128 graph_cs card..
operating system:
XP/XP SP2 does not matter when i install driver it begins crushing.

648F Neo + MSI FX5200-T128 + P4 2.8

Hi,
having som problems with Neo 648F+ FX5200 + 2X256 DDR400 + P4 2.8Ghz CPU+ PSU 450W.
it all works fin untill i installed the P4 2.8Ghz (i had Celeron 2.8Ghz). the system works more slowly & some times when i open one aplication the PC restarts ...
Anybody have a solution for this problem?? Then just buy som new hardware!

Is this a 2.8 Northwood or a 2.8 Prescott. The board doesn't support Prescott.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=470

FX5200-T128 AGP (Tv-Out)

Hello
Hopefully someone can answer my question since MSI doesnt return my emails or my phone calls. This makes me want to spend my hard earned money buying another MSI product.
I just built myself a new system and cant figure out why I am having the problems with this video card. I am using this video card until I decide which one to upgrade to. A little about my system first.
CPU: AMD XP 3200+
Ram: Cosair (2) 512meg) chips PC3200 (Mastching Pair)
MB: Gigabyte 7nnxp (Latest Bios)
Sound Card: Sound Blaster Live 5.1
HD's: 85, 120, 160 gig Maxtor Drives
MSI FX5200-T128 (Latest Bios)
KDS VS-195 19 inch Monitor
I am running the Latest Bios and software MSI FX 5200 Drivers 53.03 (Nvidia Drivers) for the FX5200-T128 AGP 8X video card and still have these problems.
The problems I am having probably have something to do with the refresh rate but i'm really not sure just guessing. The taskbar (down below) turns a solid color and you can't see the icons on it when dong different tasks on the computer. Evently it goes back to normal and everthing goes back to normal. When I first boot the computer up I get a white background (which doesnt bother me to much). Plus I use Photoshop a lot and when I am first booting that up the screen goes to white but after its loaded up I see everything I need to see. If I am in Photoshop doing some editing the whole screen turns white and usually the only way around it is to press the esc key and sometimes I loose my work and have to start over. If I go to the control panel then select the display icon/settings/advance/troubleshoot/hardware acceleration. If I lower the performance on the card way down then i don't have a problem but why would I do this.
Any help would be greatly appreciated
Michael

IF you had done a search and some research on that card you would see that it's a glorified GF2 440 MX equivelent and is not a high end video card for much else than a normal business workstation...graphic editing wouldn't be my first choice to do with that card...
Now you could have a bad motherboard as well...power supply could be light on it's output to power your components...it could be a lot of different things...
Need to troubleshoot your system with known good parts of the same manufacturer and chipsets...
Good Luck!!
Bonz

KM2M Combo-L(MS-6738) and FX5200-T128 DDR TV out 8x

?(
I need some help, I need to know if I can install a videocard MSI FX5200-T128 DDR TV out 8x in a motherboard MSI KM2M Combo-L(MS-6738)
Thanks

Aetius,
I do not know, can you? :D
The card will work with the board, but I do not know if you can do it or not.
Richard

FX5200-T128 Screen flash on log in....

Hi there,
Just purchased the MSI FX5200-T128 card and installed with a new installation of XP and supplied drivers. Upon log in with any user the screen flashes twice, then logs in. Also when I go to the display settings and go to the FX5200 tab the screen flashes. Windows update indicated that I needed a new driver signed in July (I think) so I downloaded these. These were 45.23. After installation of these, hitting the display manager toolbar icon causes the screen to flash, as well as retaining the previous flashing problems!
This morning I have downloaded the 45.33 drivers with the same results.
Any ideas why my screen keeps flashing!?
Thanks in advance,
Mark
Athlon XP 2000
Gigabyte GA-7VRXP
1024Mb PC2700
MSI FX5200-T128

I have another problem. I know that support for this card is poor with the current XFree and have downloaded the run file from Nvidia. I have a new HD and started to boot Mandrake 9.0 from CD. It got as far as hitting enter to start the install....then the screen went blank and that was it....
So now I have problems in both Linux and WinXP!!
Any help would be much appreciated,
Mark

Concerning FX5200 T128 with and without fans!

I have seen the MSI FX5200 T128 VGA card in two shapes: one with a heat sink, and another, a bigger one, with a fan or what's called Twin Flow.
Both of them are MSI GeForce FX5200 T128!
What is the difference between them?

One with bigger fan is overclocked and with temp sensor.

FX5200 T128 and DVI Port :(

Dear Friends
I have a MSI GeForce FX5200 T128 (128MB) VGA card.
It has only D-Sub Port(DB 15-Pin) and a S-Video port and DO NOT HAVE A DVI Port :(
But in the manual its written that
"Support for dual-link DVI for compatibility with next-generation flat
panel displays with resolutions greater than 1600x1200 without
the need for reduced blanking"
So, now I'm planning to buy a new LCD/TFT monitor, to take advantage of digital picture through DVI input without converting from Digital->Analog->Digital. SO that I'll not loose any quality.
So Is it possible with my card ?
I think its not possible as it does not ve a DVI port.
Very bad product .................

Thank you all for your support.
But, it has been writen in the FX5200 T128 section/features.
So I thought .......
Anyway seems I ve done a bad investment Any exchange offer from MSI for Asian customers in future

FX5200-T128 mosfets extremely hot

Hi,
I have a MSI Geforce FX5200-T128 video card. I'm worried with the 2 MOSFETS near the BIOS chip and Svideo-out because it is getting extremely hot. Is this normal?
Thanks.

Mosfets normally get hot.
They are generally designed to handle high heat. I wouldn't worry about them unless your having problems. If they do worry you I would attach some tiny heatsinks to them with thermal epoxy. Radio Shack sells some or any small heatsink will do.

[GeForceFX] S. .O. S fx5200-t128

tengo 14 maquinas con esta graphic card FX5200-T128, 128mb ddr, S-TV_out desde hace 7 meses,
en la ultima semana empesaron a reiniciarse, el disipador de la graphic card toma mucha temperatura produciendo el reinicio, las 14 maquinas estan en las misma condiciones se REINICIAn, necesito ayuda urgente ya que son herramientas de trabajo.-
MOTHERBOARD: asrock K7VM3
PROCESSOR: AMD sempron2400+
256 mb ddr
I have been having 14 maquinas with this graphic card Fx5200-t128, 128mb ddr, S-TV_out for 7 months, in completes week empesaron to be reinitiated, the dissipator of graphic card takes much temperature producing the resumption, the 14 maquinas estan in same the conditions REINICIAn, I need urgent aid since they are work tools. - MOTHERBOARD: asrock K7VM3 PROCESSOR: 256 AMD sempron2400+ mb ddr

Hi, how high the emperature of the cards are? are all of them getting hot? when you say Quote
the dissipator of graphic card takes much temperature
, what exactly do you meant to say? are they over 70° C? what drivers you are using? the latest? fresh windows install? Directx? please provide more info about your PCs
here you can read some info that I guess will help you:
>> General FAQs for MSI SocketA boards <<
Is your problem caused by your PSU?
Suggestions on posting and getting better answers
follow the forum rules, only english allow, salu2

Windows crashes on MSI FX5200-TDR

Hello all,
Yesterday I've bought a MSI FX5200-TDR 128RAM graphic card as a replacement of my old ATI Rage Fury PRO. After the card drivers was succesfully installed and the Windows 2000 system restarted then it started to halt randomly when I've tried to play some 3D games (for example Ghost Recon).
My first idea was to update to the latest NVidia drivers and so I did. Then switching the graphic resolution to 1280x1024x32bit halted the system immedeatelly. Each futher restart of the system leads to immedeate halt before the OS boot process to be finished. Thus I've ended up with an unbootable Windows 2000.
Then I thought either the DirectX 9.0 or the newest NVidia drivers are the problems. I've decided to reinstall Windows 2000 and here comes the funny part. The instalation proccess halts once the drivers are loaded e.g. the first part of the instalation proccess. I'm even unable to reach the disk partitioning page. Even worse Windows XP does exactly the same.
By "halt" in this message I mean that the system immedeatelly is shuting down e.g. no message, no error, no blue screen only a light speed shut down
The system I use has the following hardware:
Motherboard: ASUS A7M266-D -> a dual AMD Athlon MP proccesor board.
Processor: 2x AMD Athlon MP 1600+
Memmory: 2x 512Mb DDR RAM 266Mhz CL 2.0
Harddrive: 1x 40Gb Quantum, 1x 15Mb Maxtor
CD-Drives: 16 speed Plextor DVD, 52 speed Acer CDROM
90% of the time I use this system with Linux (Slackware 8.1) and FreeBSD. Actually I use the Windows OS only for 10-20 minutes relaxation with some 3D games. E.g I have 3 operating systems installed on this computer. The Windows 2000 and Slackware are on a same drive (the Quantum one), FreeBSD I have on the other one.
The most unusuall thing is that first I've installed the NVidia Linux and BSD drivers first and both OS's works without any problems. Even now (I'm wroting this message using Linux on the same system) I have no single halt with them.
For example on my Slackware Linux I have a stock Linux kernel 2.4.21 compiled with SMP and Large Memory support.
The XServer and Gnome work perfectly, the OpenGL based screen saver (as test example) and MPlayer as well.
I have no clue on the problem. It looks like an incompatibility between Windows on one side and the Asus mobo and MSI graphic on the other. I'm glad to see that the *nix'es are more stable again nevertheless I have nothing against Windows 2000.
In this situation I have no choice but to switch back to my old ATI card and keep relaxing with Counter Strike ) Or maybe better to get rid of wasting my time with playing games )) Of course I'll appreciate any idea on this nasty problem maybe I'try to finish Ghost Recon before finally quiting with all these computer games )
Best regards to all surfing in this forum and sorry for my English

i suspect its a weak psu ,can you run any thing stresses the vga card under linux

MSI FX5200-T128[8917]Has 5200Ultra Chip

Similar Messages

Maybe you are looking for