MSI FX5900 Ultra 256 MB and MSI 648 MAX
I have just installed my new FX5900 Ultra graphics card and when ever the card runs any 3D application for more than a couple of minutes, my PC will instantly shut down. The only way I can get it back up, is to remove my power cable from the PSU and wait about 20 seconds and then the PC will boot again.
I have checked the temperature of the card before and after the shutdown; and the latest Nvidia reference drivers show a GPU core temperature of 37 C. In addition, if I put my original GeForce 3 back into my computer, I experience no problems.
Looking on the internet, I have come across other people who have had a similar problem and this was resolved by changing the AGP slot to run at 4x rather than 8x. I have gone through the 648 Max BIOS and am unable to find anywhere where I can step down to 4x AGP.
Any Help Will Be Greatly Received.
Regards,
Macross
Thanks for your help guys. Whilst I have not been able to pick up my new powersupply, I have removed the Q-Tec 400W and put my old 300W PSU back, and guess what?? My PC has not shutdown since.
This power supply lark is totally new to me, and it does seem that a good quality 300W PSU can be better than a average 400W. I have never looked at the 3.3, +5 and +12 before, just the total wattage. Well, you do live and learn. Though it would have been nice if MSI put information like this in the manual of the card, or the WEB FAQ's.
I shall pick up my new 520W PSU on Saturday. Then I can put this new 5900 Ultra through its paces!!
Thanks
Macross.
Similar Messages
-
Can anybody give me a good tips, whats wrong when Windows XP installation (BSOD) failed on a computer with MSI 648 Max, I can see that is many in the some siuation as me. But no one of the solutions looks like i good one. Is it somebode that have find out the problem, or?
Its a good idea, but the RAM that I use is the same thats worked fine in the computer earlier. Its DDR DIMM 3100 TwinMOS, and thats a good stuff if I know it right?.
I have tried to take out the harddisk and placed it in another computer, and installed Windows XP. After that I placed the harddisk in the computer with the MSI motherboard, and I get I/O error and it couldnt red from the harddrive. I think that its the 250 watts powersupply, as the problem. I have looked i BIOS and under PC Healt, and there I could see that the +12 V and -12 V will only give +/- 11-11,5 V. Now I have purchase I new bigger powersupply, and hope that gonna fix the problem. -
MSI 648 Max and ipods? Prob's connecting.
Please can anyone help?
I have a MSI 648 Max board with on-board usb2 and have problems connecting to my 4G 20Gb iPod. I'm pretty sure it’s the USB connection that is the problem. Has anyone else had this? Can anyone suggest anything to help? This is my last port of call before I’ll have to folk out for a Firewire card which I really don’t want to do.
Thanks.Thanks for replying .
I have used USB for a number of devices (Printed/Mouse/DigiCam) and have never had any noticeable problems. I’ve tried the disconnecting thing and it didn’t seem to have any effect.
I thought it might be something to do with iPod’s not liking on-board USB and decided to post a topic here to see if anyone else has had a similar problem. Doesn’t seem to be much talk of iPod’s though. I wondered if MSI knew of any problems.
I have been around a few iPod forums but not many people seem to be using on-board USB.
Keep the suggestions coming though. Thanks. -
MSI 648 Max - Display Problems
I recently bought the MSI 648 Max motherboard, as my system needed an upgrade quite badly. To cut the costs down a bit, I’ve used some parts from my previous system (eg the video card which is an 2x AGP, 64 Mb, Kyro based card) but got new RAM, CPU and psu.
I put together the system (described below), loaded Windows ME, updated all drivers with latest releases, and the thing works but the quality of the display is really bad ;( . That is, I get lots of video artefacts (shadows, fading text, vertical lines, distorted colours, etc). The video card was working fine on my other machine. Also, Sisoft Sandra says that the card is operating at 2x AGP, as it should.
I am not overclocking; some of the BIOS parameters I used are as follows (based on the OPTIMAL DEFAULTS):
AGP Aperture Size 128 Mb
DRAM CAS Latency by SPD
Timing Setting Mode NORMAL
MA 1T/2T Select AUTO
Primary Graphics Adapter AGP
Allocate IRQ to PCI VGA NO
CPU/DRAM Frequency Ratio by SPD
DRAM Frequency 167 MHz (for now)
CPU Frequency 133 MHz
AGP/PCI Frequency 66/33
DRAM Vcore 2.6 V
CPU Vcore AUTO
The system temperature showed in the Health Status is less than 40 C (104 F).
I have tried the latest AMI BIOS (version 1.3), and then reverted to version 1.0, but I still have the same display problem.
I would really appreciate some help.
Ciao
mystro
========================================
Windows ME (v4.90.3000)
Pentium4 CPU 2.4 GHz (133x18.0), FSB 533 MHz
MSI SIS648 Max (MS 6585) ver. 1.0
2 x 256 MB Corsair DDR400 (CMX256A-3200C2, CL = 2-3-3-6-T1,
Hercules 3D Prophet Kyro 4500 TV Out (Kyro I not II) 64 Mb, AGP 2x, 175/175 MHz
IBM 40GB 7200RPM UATA100
Mitsubishi 40x CD-Rom
Yamaha 8424S CD-RW
Adaptec 2930U SCSI card
Eagle 350W psu, 190W (combined 3.3V & 5V)boards agpx4 and 8 only so i dont advise using that card
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=355&MODEL=MS-6585 -
I have problems with my sons MSI 648 Max Mainboard, everything seems to be alhright, but when I upgraded the BIOS version to the lastest. the computer starts to hang. I have also but a new harddisk in to the computer an some more RAM. I think the problem begin in the powersupply, its just a 250 W powersupply to the computer, and we have av 1.8 GHz Celeron. Have anything had this problem, or is it something I should think about after the upgrade of the BIOS?.
I know that 250 watt is to small, but the computer have function great in 2 months. But after i have taking out the old harddisk and but in a new bigger one, and placed some more RAM (256). After that I installed Windows XP on the new harddisk, but after that I upgraded my BIOS version to 1.4. After the upgrade of the BIOS the computer starts to freeze after a while. I tried to reinstall XP but the computer freeze under the installation. I have tried to switch back to older BIOS version, but I cant make it work. I have really hard to believe that the powersupply is the reason why the compter freeze.
-
Sound Problems with MSI 648 Max ( MS-6585 ) Board - Help !!!
Hi,
i have the MSI Mainboard: MSI 648 Max ( MS-6585 ) and when I put on the microphone i have a bad sound on my soundboxes like scratching or beeping.
I have installed a new BIOS update and new Sounddrivers.
I have Win2000 with SP3.
Anybody can help me???
THX ;(Error404,
I since you have a 648 Max and you posted in the Multimedia Forum, I moved the thread to PIV Motherboard Forum for you.
Good Luck,
Richard -
MSI 648 max problems, please help
Just put a new machine together and I am having some problems, hopefully someone can help.
My machine seems to run pretty stable in OS, but dies when any game is played. It will crash anywhere from 2 minutes - 45 minutes in the game. Ive tried several games: C&C generals, unreal2, etc with the same results.
Bios are updated and nothing is overclocked. Win XP is fully updated.
Specs:
MSI 648 max, 533fsb
p4 2.4 northwood
Seagate 80gig hd 7200rpm
MSI g4 ti4200
2 - 512mb pc2700 ddr333 dims (double sided)
Antec 350w ps
sb live
48x liteon cdrw
16x liteon dvd
We are using a Kingwin KT-436S-WM case
http://www.kingwin.com/product.asp?cid=15&pid=75
It has a total of 5 fans with intake/exhaust
HSF currently being used is the retail box HSF
With the case sides on, here are temps at idle after 10 minutes in OS:
Proc: 136
System: 91
Vid card: 118
With the case sides off, here are temps after running 10+ minutes in OS:
Proc: 125
System: 86
Vid card: 114
Here is the error that pops up (after crashing) when playing Command and Conquer: Generals:
Technical Difficulties
Sorry a serious error occured
Thanks in advanceWell my roomate cancelled the memory test after 12 hours, so I dont know those results.
I do know that after removing 1 of the DIMMS, the machine seemed to be stable playing games.
I sure wish MSI would have stated it only accepted 1 double sided DIMM.. especially when the reccomend Kingston ram, which is double sided......
Me and my roomate BOTH bought this motherboard, while my roomate only bought 2 DIMMS of 512, I bought 3!!!!!!!!!!!!!!!!!!!
So now it looks like we need to return these motherboards and get new ones... I HAVENT EVEN GOT MINE OUT THE BOX!!!!!!!!
Any reccomendations on an MSI motherboard (or any) that support double sided DIMMS? I am looking for 3 slots...
thanks...
Any other advise on how to get this motherboard to work with all this ram would help too, so we dont have to RMA through newegg....
Anyone from MSI read this board?????
X( :O ?( -
Intel 3.06GHz on MSI 648 Max L
Hi,
I have a question; if I were to purchase in the future a P4 3.06Ghz processor which supports HT, will it work on my MSI 648 Max without hyperthreading just as a normal processor? I understand that hyperthreading does not work on this board (the one without the udated chip). I'm just curious if the processor itself is supported. I don't see why not, it should just work as a single 3.06 processor. Thanks in advance.
Razvan ScutaruI have the 3.06 running in mine , and the board is the one that does not have HT.. and it works just fine..
The only thing that I have found is that you cannot run 400 mghz ram in it with spd setting.. you will have to go and set up the setting manual and then it will work.. don't ask me why I can't find it out..lol..
But other than that it is one fast computer..
also if you set the ram setting to anything other than the fast setting it will default back to 2.5 on the cas setting..
But after running bench marks I can't see any improvement by running at a cas of 2..
Also if you have a black screen when you are working with the bios you will have to clear them and reboot .
I had one that gave me problems but it was the PSU that was causeing it.. 400 wat but in real load it was only putting out 328 wats.. and that will not work with a 9700 pro in this board.. at least it would not on mine. -
Hi,
I have put three GB of RAM in a PC containing a MSI 648 Max motherboard.
The memory is 3 * PC2100 1GB of Samsung 266 DDR RAM. I've ran memtest
(http://www.memtest86.com) to test the chips to test the chips individually
and in blocks of two. The machine runs fine with up to 2GB, but fails
when all three are in.
I have two identical machines (and two sets of 3GB RAM), which exhibit the
same problem, memtest failing at the same time.
The machines run P4 2.4Ghz processors.
Can you help?
Thanks in advance
EwanHello
Goto the following link and see if this can give you some insight. Scroll down to the bottom of the page and it will give you configurations for that board. Good luck
http://www.ec.kingston.com/ecom/config/modelsinfo.asp
Quote
Originally posted by the_boat
Hi,
I have put three GB of RAM in a PC containing a MSI 648 Max motherboard.
The memory is 3 * PC2100 1GB of Samsung 266 DDR RAM. I've ran memtest
(http://www.memtest86.com) to test the chips to test the chips individually
and in blocks of two. The machine runs fine with up to 2GB, but fails
when all three are in.
I have two identical machines (and two sets of 3GB RAM), which exhibit the
same problem, memtest failing at the same time.
The machines run P4 2.4Ghz processors.
Can you help?
Thanks in advance
Ewan -
Msi 648 max working with ati 9700
Hi,
I got it working (100% no crashes) today on windows 2k adv server:
msi 648 max (6585 early version), ati 9700 (1st version), and mostly the latest drivers/software, e.g. msi mb bios v1.2, sisagp47.exe, siside47.exe, ms directx9 (dx90_redist.exe), wxp-w2k-radeon-7-83-030120a1-007447c-efg.exe, control-panel-7-83-030120a1-007447c-efg.exe.
Before you get happy, now I want to replace the 648 motherboard with something better. It is a total waste of money to try running an ati 9700 on an msi 648 max.
Summary: I had to set my DRAM memory clock to 2.5, fast write off, and agp to 4x. There are a bunch of other bios settings and ATI control panel setting to keep it from crashing. If anyone is pathetic enought (like me) to want more information, then post your questions.
The only reason I'm posting my results is because I got all my help from people on this board. BTW I'm running Corsiar CMX512-3200C2 (at 2.5 sucks), and Antec Truepower 550w power supply (which is not p.o.s).
Good luck and save your money....
Thanks all.Hi,
I agree. My Bios is at version 1.2 because I flashed it a couple months/weeks ago and that was the current version at the time. Now they have up to 1.4 but I did not need it.
Bye. -
MSI 648 Max-L (MS-6585) SiS 648 P4 (533FSB) Skt478 DDR ATX Motherboard w/Audio, LAN Retail
400/533FSB, ATA/133, AGP 8X, 3DDR DIMM, 6PCI, USB 2.0, Audio, LAN, Bluetooth Pin
93.49
ok my question is... im sorry i just wanna make sure i buy the right motherboard ok ?
can this motherboard support
intel p4 3.06 Hyper threading
1gb kingston ddr 333
40gb ata133 7200 rpm
maybe msi geforce fx the new one but i cannot find it on my online retail store so i probably going to buy an ati 9500 pro 128mb 8x
windows xp prof... this motherboard comes with ata133 cables for my HD?
whow will work my system and whow much time my motherboard is going to work
if this motherboard dont support the above config. plz sugest me any other motherboard... that will work perfect or just sugest me any other better version of mobo u guys have... and plz tell me where i can buy the msi geforce fx plz ...and for whow much thank u guysMake sure you get the HT Ready version. Utilizes the 648bo chipset and also has a sticker on the box. Im not exactly sure how to distinguish the 2 different types because the model numbers are EXACTLY the same.
Support Hyper Threading..
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=417&MODEL=MS-6585
Doesn't Support...
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=355&MODEL=MS-6585
-rob -
What show 2nd termo-controller on a MSI 648 MAX?
Hi from Russia.
I have 43 motherboards MSI 648 MAX (HT-ready).
My computers spontaneously freezes. I think, that this problem because of overheating motherboard chipset. Motherboard Monitor showing t80 Celsius on a 2nd termo controller. This is error, or really big temperature of a SiS chipset (t80 on all motherboards)?
And i have other problem in a Counter-Strike.I press ESC when i play in OpenGL mode and i have black screen with freeze (video GF4 Ti4200 AGPx8 )
Maybe anybody know how solve this problems?
Please sorry for my english.Did you ever resolve this? I have a similar problem
Machine has been running with a 512 Mb/333 MHz module in slot 1 for 2 years with no problems. I want to increase the memory size. Tried adding all sorts of combinations of other modules, but won't boot. I went out and purchased a compatible Kingston 1 Gb/333 MHz CAS 2.5, compatible according to Kingston site. The memory counts to 1 Gb, and everything POST seems to work. I get a beep, and then nothing. Trying different slots, the same problem. The 512 Mb works in all slots, but not the 1 Gb.
What is the fix for this MSI memory upgrade issue? -
Degauss prob. w/MSI 648 Max pls help
PC spec. below.....message
Everytime I restart my monitor from Xp or when leaving the bios, my monitor does a degauss. And it gets very irritating X( when you fx. reinstall your PC from start.
The "light" on the monitor also goes from green-orange-green as if it had been shut down.
Have tried conn. the monitor to my other system, and here there are only degauss when i power my pc up.
Have also tried another MSI TD4200 as I have simular in my other PC. no effect at all...
A friend of mine got same PSU and Monitor and his system also degauss only when he power up the PC.
Have anybody ?? noticed a simular problem before, and if what's the "cure".....
To me it "smells" like a bios problems,,,,,,,,,but I be mighty happy to ANY other suggestions.
PC SPEC AS Follows
P4 2,4 533 w/box cooler
MSI 648 MAX
PSU VIP 450w w/an average power on 250w
2x256 Pc2700 Apacer
MSI GF4 TD4200 64mb
ASUS CD
Liteon CDR/W
WD 80gb JB 8mb cache
Monitor AOC 9KLR "new" versionNever the less it does........have tried the VGA card in another PC, and here there are no degaussing.....have also tried another VGA card,,,,,,,,,same deal mate! ?(
Problem is prob. related to the mobo power management......or the comb. of hardware........
I have tried changing every components exept CPU/Memory/Mobo with no changes..........
So to me i'm sorry to say it's looks like a faulty mobo or some mismatch in the bios settings.......... ;(
73/CT -
Need advice. Present computer specs: P4 2.4GHZ 533 FB, Samsung 2700DDR 512, Radeon 9700 Pro, MSI 648 Max Board . Problem Im having is after booting up puter, after about 3 min. cursor arrow changes into a 1 " square. Then screen goes black and puter freezes up. Ive checked out the processor, video card, in another computer. No problems incountered. Do I have a Bad board???
There is a compatibility issue between 648 Max and Radeon 9X00. There are many threads about this issue in this forum. Have you tried updating your BIOS because it should solve some issues?
-
I wanna try and oc this damn thing and see how it goes but my bios is retarded. if i change anything in it it will not start. no post no screen no nothing sits there and i think hdd light goes on but nothing is actually going. for me to go back i have to clear cmos and i have tried diff bios versions and all the same. so what the heck can i do? i plan on buyin new board and drives soon as seeing all msi crap sux. dont know y i bought em all there a bunch of liars. so if anyone got a way other than buying new board cuz thats on way just wanna see what this one got.
Don't bather yourself I have the same problem.
:O MSI FAKED US ALL A BIG ONE. The problem is in the option AGP/PCI Frequency (MHz)
It doen't work and my clue is:
1- When I adjust my CPU FSB more than 110 MHz (PCI > 36.66 MHZ) and set this option to 66/33 the computer boots normally until it starts loading the O.S. and errors saying that the OS cannot start due to lost system files, or Read
Write error to Aux device, or it hangs.
2- When I set this option to 80/40 and the CPU FSB to Auto (100 MHz), the computer boots normally and load the O.S. normally and everything goes just fine. and Sandra software reports the PCI clock frequency as 33 MHz.
Thats to say that the PCI/CPU FSB ratio is fixed at 1/3 regardless to any value selected in this option.
My system is:
Msi 648 MAX ver1.0 HT ready S.N.(648 Max0304165360)
Intel P4 2.4Ghz 512KB bus 100 Mhz
Msi MX440SE-T AGP 64MB DDR
WD 80GB 7200 HDD
Samsung 52-24-52 CD-RW
Creative modem blaster v.90 di5655
P.S. Logic 350W
Win 98SE & WinXp
Maybe you are looking for
-
Hi just bought a new iphone 5c want to put all data from my old iphone 4s on to it plugged in to my apple laptop and its tellng me to download new i tunes version 11.1 which I have done plugged in again to transfer the data and now its telling me th
-
Does deleting iTunes erase my music files
I erased Quicktime by accident and now it is asking to uninstall and reinstall iTunes. Will this erase my library of music?
-
Get read-only error when trying to create via CI
I have created a component interface of the VCHR_EXPRESS component (along with the proper component fix for an initialization issue). I had VS generate a create_ex XML schema to be used by BizTalk (PS adapter) to create a new voucher. When I try to e
-
which table is the link between Asset , PO , & GRN is stored ??? We use KOB5 for capitalisation. In table MSEG, PO number & asset fields are blanks Also in ANEK table, PO number is not stored. Suppose, in a PO, there are 2 diffrent Material codes in
-
Premiere Pro CS6 and MXF Compatibility.
We have recently had a problem with audio dropping out during export using Premiere Pro CS6. This particular project file used a combination of footage from a Canon XH-A1 and a Canon XF305. It was created in CS5 (Not CS5.5) and was recently converted