MSI FX5900SP 128VTD overclocking or bios flashing help?

I have a MSI FX 5900SP 128VTD and was wondering if any one has managed to flash the bios with that of a FX5900U, the card uses 2.8ns ddr so i am a bit put off about trying it, if any one has flashed the same card as what i have or if they are O/C it could they let me know what it is O/C too, i have flashed the card before but flashed it back as the bios was unsuitible? :angryfire:the clock speed of the card at default are 400/700, were as the standard FX 5900 and FX5900U clock speeds are 450/850, so if anybody knows there stuff? :yes:let me know.
Thanx

Thanks for the link and also the advice about making it into a key chain, but i flashed it??? with the leadtek A350 bios, but it crashed after a few minutes? , sooo i flashed it back to the original bios ant tested it and everything is ok , i then got my hand on a original nvidia FX5900U bios and flashed it with that one, and everything has been ok , its now showing up as a FX5900 ultra and my clock speeds are 450/850 were as before when manually O/Cing i could only get 465/812, but i am now happy with it as i get 668 more 3d marks on 3dmark03 and its rocks in game better than before, so i guess am going to need touse it as a G card and not a key chain? shame lol .
Take Care,
Darran.

Similar Messages

MSI K7N420 - Bad BIOS Flash - HELP !!!

I recently tried to install v2.70 of the K7N420 BIOS ...
i booted up my computer .. all was going well .. until the last section of the progress indicator.
my system hung at this point for a LONG time.
so i assumed maybe the BIOS was done flashing, and i really had no choice at that moment.
well it didn't post.
so i slapped in a PCI vid card and i got it to post.
says something about Award BootBlock ...
im guessing this is the "recovery" BIOS.
it asks me for a system DISK so i put one in with it to automatically flash the BIOS.
problem is .. it says that the bios is "write-protected" and to check my jumpers.
well ... i checked the manual, only reference to BIOS and jumpers is the one to clear CMOS, i tried that and no luck.
i also tried the /Wb command during flashing to write to BootBlock and again no luck.
anyone know maybe where these "jumpers" are or what i can do ???
i REALLY need to get this computer up and running.
Thanx!

well i tried what gfilitti suggested... twice actually ... the second time leaving the battery out for over 3 hours ....
yet no luck ... ill detail EXACTLY what happens when i turn on PC.
Mainboard without pci gfx card (using onboard) = NO POST
When i insert my old ATI 3dxpression+... computer boots up (shows spinning ati logo while video BIOS loads)
then my mainboard loads and this is what it says:
Award BootBlock BIOS v1.0
CMOS Checksum Error
Insert System Disk.
so i insert a bootable disk i made (also tried using win98se bootdisk and placing bios files in RAMdrive)..
goes to the BIOS update screen...
says this:
Erasing Flash - 0FE00 ok
then the progress indicator loads and then i get an erroe msg as follows:
Flash ROM is write protected
Please make sure whether lockout jumpers is set to
correct or not
Warning: program chip fail
PS-> i CAN'T access BIOS menu by pressin DEL like before.. all i get is the BootBlock v1.0 screen.

Problems with MSI K8MM-ILSR mATX after BIOS flash...

I flashed it with the latest AMI bios dated 12/21/2004 and i used the LiveUpdate Windows-Based flashing. Everything was perfect and ran fine, comp rebooted and everything is still running great, EXCEPT....
Now my memory wont run at DDR400, There is a DDR Setting, if anyone wants to DLOAD the manual and look with me....Its either set to 'Limit' or 'Auto'. Auto on the old bios loaded at DDR400, but now its DDR333. When i choose limit, my DDR Options come up, DDR100, 200, 266, 333, 400. When i set it to 400, DDR333 STILL comes up. Aside from that i dont know where the dividers are. CPU said my ram is at 333 aswell. Its stating that the mobo is using CPU/12, which i dont like.
Any help or ideas? I dont really wanna use the old bios.
EDIT: I tried removing CMOS battery, resetting CMOS, and using the second to last BIOS, still no DDR400.

rakstr,
Since I now have two boards with memory setup restrictions (see stats) from MSI, I decided to work the problem with my own fix. That's Danno's "don't get mad, get even-better-results policy". I had a choice of hacking the Bios or something more entertaining......
Last night, I wrote a PCR File for the AMD Athlon 64 memory controller, i.e. the Hypertransport bridge. I googled to find one, but apparently no one's bothered to write one. I'm doing alpha testing now with the PCR, and the results have been good. Are you familiar with H. Oda's WPCREDIT/WPCRSET utilities? I see some of the folks in this Forum have been using it to toggle 1T/2T Command Rate. Since Memtest86+ can provide alterations to settings on the fly to establish best memory tweaks with stability, I'm now able to recreate any of those settings with WPCREDIT from within Windows. I had fun last night tweaking a setting with WPCREDIT running on screen side-by-side with the memory window from CPU-Z. As I'd tweaked a setting, CPU-Z would almost immediately update (on it's own) to the altered setting....fun fun. It was good verification of the PCR. I do have more testing and documentation to do.
I need a beta tester/volunteer in a day or so. Are you interested? Are you familiar with those utilities?
Danno

BIOS FLASH HELP! (No option to boot from USB)

All,
Before I get experimental (i.e. break everything), I was hoping to see if someone else has faced this problem yet. I have one of the earliest to market nettop winds when Newegg put them on sale... so old, in fact, that the bios is 1.08 (zero, eight!). As such, I realized I was running in USB1.1 and not high speed. Turns out the bios from 1.2 - 1.7 support usb2.0 which would help me greatly with my external drives.
I followed the how-to and created a bootable flash drive, but I have no option in the bios right now to boot to USB. Is there any other way (i.e. in Win7) to flash the Bios?
Please help.
Thanks.
-Chow

Quote
one of the earliest to market nettop winds
Which one?
--> http://eu.msi.com/index.php?func=searchresult&keywords=nettop
Quote
so old, in fact, that the bios is 1.08 (zero, eight!).
Before you do anything, please check the BIOS Release Date and the BIOS ID String (e.g. A7418IMS). We have to be entirely sure we are talking about the right nettop and that proper BIOS Version.
Quote
I realized I was running in USB1.1 and not high speed
Are you absolutely sure about this? The data transfer rate does not exceed 1.43MB/s? And this "slowness" never was a problem for you?
Please note that you have to load "Optimized Defaults" in BIOS Setup to make sure that the USB 2.0 controller is enabled. It will not be enabled when "Failsafe Defaults" are loaded.

MSI GT70 0NC Overclock Custom BIOS

Hey!
I have a MSI GT70 0NC. BIOS: E1762IMS.10U
i7 3610qm 670m
I'd like to overclock the CPU a little bit or at least to avoid the CPU throttling. Can you help me with a unlocked/custom Bios out?
I only donated one Euro, because I didn't know how much money, you want for your good work!
Of course I will donate more than just a Euro. Just tell me how much!
Thanks and keep up your good work!

Hello sammy
Quote
I'd like to overclock the CPU a little bit or at least to avoid the CPU throttling.
About CPU throttling you can reflash to this MSI's test version:
https://forum-en.msi.com/index.php?topic=162629.0
Note that heat will be increased, if need i can offer you custom EC based on this one with improved FAN behavior to compensate the extra heat.
Quote
Can you help me with a unlocked/custom Bios out?
Yep, custom unlocked BIOS + intel storage firmware update to the latest version
and custom EC [if needs]
Quote
I only donated one Euro, because I didn't know how much money, you want for your good work!
Of course I will donate more than just a Euro. Just tell me how much!
Aha oki, check PM for some examples.

MSI GT-70 2OC Aptio BIOS Recovery help

Dear All,
I have a MSI GT70 2OC-059US i7 running under 64bit windows 8.1 and
I tried to update the BIOS using the instructions at www msi com/files/pdf/Flash_BIOS_by_UEFI_BIOS_Setup_Utility_en.pdf
with w8_E1763IMS.50R
USB stick I used was FAT32 on a USB3.0 port. This computer has Aptio AMI BIOS.
I followed the above Step-by-Step instructions to the letter and proceeded to the end of step 12. When I pressed ok at the end of step 12, screen went blank system did not do anything for about an hour. There was nothing else I could do so I turned the notebook off from the power button. Now I can turn on the notebook from the power button (power button light up white) but screen is completely black and no beeps what so ever (with and without USB stick plugged in).
I would greatly appreciate if someone can guide me on how to recover my system - I have performed BIOS upgrades before on other computers without any problems and I am fairly computer literate. What I have seen on the forum requires floppy disks and appears to be out-of-date.

I updated my version of bios w8_e1763ıms.70s.
the bios does not have the re-opening machine

Bios flash help

helpppppppppp trying to flash bios back to old version,
unzipped to floppy,went into dos mod,started award prog,in the first coloum it had exe so i clicked y for yes,
then second coloum was a guess picked the biggest file w6545ims.120 and it fails what am i doing wrong. ?(

Better not flash from a floppy, read the notes here
What error did you get?

Re: MSI Z68-GD80 (G55) Archive BIOS flashing

Perfect. Thank you!

Quote from: flobelix on Today at 13:37:13Wait. Are you connecting the vga directly or are you trying via connecting to the mainboard via the igpu outputs? If so connect the vga directly.
Well, 1.4 is indeed very o...

User guide: MSI HQ USB BIOS Flash Tool

Guide based on USB tool v1.17c
HOW TO properly use the MSI Forum HQ USB Flashing Tool to update your BIOS
This user guide provides a step-by-step explanation for properly using the >>MSI Forum HQ USB Flashing Tool<< to prepare a USB Flash Drive for a safe BIOS-Flash in a pure DOS Environment. The tool itself will not perform the actual flashing operation. It will "only" help you to get your USB Stick set up for an automated DOS flashing procedure which requires final confirmation. (If you should run into any problems before you are prompted for final confirmation in DOS, no attempt to flash has been made yet and there is no danger of a bad flash.)
NOTE: If you are having problems getting your USB device to boot correctly, you may need to format it correctly as the geometry data may be incorrect. You can do that by pickup option "Fix My USB key" from the Tool or by using >>> THIS <<< tool here! For future usage you can skip this step, it need to be done only once if your stick need adjustment.
Symptoms that your USB key need a fix after booting from the USB key:
* Error: "No bootable partition in table"
* Blinking cursor in a top left corner and nothing happens
* "RIVER2 MSI"
* "Error loading operating system"
* "Missing operating system"
* "Disk in drive is not a bootable"
* Booting from selected USB key is IGNORED, the other/typical OS continue to load as usual
If still no change after using "Fix My USB key" Tool's option or HP Formatter Tool as alternative.
Then try with different USB key, the issue is there.
Note: Those USB keys who support "U3 Smart", this "feature" must be removed before proceed.
Refer to followed link: http://u3.sandisk.com/launchpadremoval.htm
Read the three notes that follow first before you move on:
1. Note: Before you even think about flashing a different BIOS, be sure that your system is stable. If it is not stable, make it stable first. (Read >>here<<.)
2. Note: Make sure your system meets the preconditions and system requirements mentioned below before you attempt to use the tool.
3. Note: Do know that flashing your BIOS, be it with the help of the tool or otherwise, is done at your own risk.
Contents of the Guide:
0. Preconditions & System Requirements
1. Basic Description of Functionality
2. Installing/Starting the tool.
3. Choosing a Preparation Method
3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)
3.2. Method 2: Processing a BIOS File Directly
3.3. Method 3: SureHands Live Update
3.4. Method 4: Geometry Change
4. Selecting the USB Flash Drive for preparation
5. BIOS Settings, Booting & Flashing
5.1. BIOS Settings to Check
5.2. Booting from USB Flash Drive
5.3. Flashing Procedure/Running MemTest86+ & CMOS-Clear
6. FAQ: Common Problems & Solutions
7. Version History
0. Preconditions & System Requirements
The main precondition for using the tool is a working & healthy Windows installation on the system that needs the BIOS flash. The Tool is designed to work with MSI Retail Boards & Laptops only.
Please note mainboards of other brands and OEM boards that are manufactured by MSI but sold by Medion, HP, NEC and others are not supported. If you have an OEM board that needs a BIOS update read this topic: >>OEM boards manufactured by MSI<<
Supported Operating Systems: All current Windows Versions (32bit & 64bit, any service pack (SP)): Windows NT, Windows 2000, Windows 2003, Windows XP, Windows Vista, and Windows 7.
The second requirement is that you have a fully functional USB Flash Drive that uses the FAT file system (FAT/FAT32). NTFS is not supported. If your USB Flash Drive is using the NTFS File System, reformat it to FAT or FAT32.
As the tool also provides a Live Update Option ("SureHands"), you'll need a working internet connection if you want to choose this method. Not all boards are supported at this point.*
* Check section 3.3 of this guide to see if your board is currently supported by the SureHands feature.
1. Basic Description of Functionality
The MSI Forum HQ USB Flashing Tool will help you to easily prepare an USB flash drive for an automated BIOS flash in a pure DOS environment, which is the safest way to perform such a procedure. The tool will also allow you to run MemTest86+ in a pure DOS environment. However, the preparation of your USB Stick is done in Windows and basically includes two steps:
(1) The device will be made bootable.
(2) All necessary files (incl. BIOS file, actual flasher and MemTest86+ executable) and all DOS commands that are needed to flash/test memory will automatically be implemented.
Because the tool does not reformat your USB Flash Drive*, no files that may currently be on the stick will be lost during the procedure. Just make sure that there is still some free drive space, otherwise there will not be enough room for the files that are needed for BIOS Flashing.
* Excluding the Geometry Change method which will destroy all data on the USB storage device.
2. Installing/Starting the tool
Treat the forum's USB Flashing Tool like a regular application. Download it to and run it from your hard drive, there is no need to copy & start it from the USB Flash Drive that you want to use for flashing. Both, the installer version and the stand-alone version, do precisely the same job. Which of the two versions you use, is solely up to you and your preferences. The stand-alone version can be started directly by clicking on the executable file. The installer version will perform an installation and provide you with an entry in your start menu and a desktop shortcut to start the tool.
When you start the tool a DOS box should open up to provide you with status messages and prompts. Do not close that box unless you want to abort the preparation procedure!
Please ensure that you connect the USB flash drive you wish to use before starting the Tool!
NOTE: If you do not connect your USB storage device before starting the tool, or the tool doesn't detect it. You can still insert the drive letter, as the tool will continue as normal.
The tool will first check, if an MSI mainboard is installed in your system and show you its model name and PCB Version in a message box. Click >OK< to continue to choose the tool's preparation method that you want to use to prepare your USB Flash Drive.
3. Choosing a Preparation Method
If your MSI Retail Board is properly detected and you have pressed the >OK< button in the message box, an option box will pop up that allows you to choose between three different operating modes. The options you can choose from are more or less self-explanatory, however, read the detailed description if you are unsure how to proceed at this point:
3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)
Official MSI BIOS-Updates that can be downloaded from the product site of your board model do usually come as .ZIP or .RAR archives that contain the actual BIOS File and the corresponding AWARD or AMI flashing utility (depending on the BIOS Type of your board). If you have downloaded such an archive, you should choose the first method from the option box.
You do not need to extract the files from the BIOS archive. The tool will ask you to point it to the archive you downloaded and automatically extract the BIOS File and the AMI or AWARD flashing utility and put it them on your USB Flash Drive. You don't have to worry about anything else. All you have to do is to remember where you saved the ZIP or RAR file you downloaded:
3.2. Method 2: Processing a BIOS File Directly
If you do not have a ZIP or RAR archive that already contains a BIOS File and the proper flashing utitility, but only the plain unpacked BIOS File, choose the second Method from the option box. In most cases BETA BIOS Files supplied by MSI Support or shared here in the Forum do not come with the proper flashing utility. If the MSI Forum HQ USB Flashing Tool is told to process a plain BIOS File, it will automatically check the type of BIOS File (AMI or AWARD) and then select the proper flashing utility that needs to be used. All you need to do is point the tool to the BIOS-File that is supposed to be flashed:
3.3. Method 3: SureHands Live Update
"SureHands Live Update" is the third operation method you can choose from the option box. It provides a much safer and more reliable alternative to MSI Live Update as the actual BIOS Flash is performed in a pure DOS environment as well. If you decide to use this option, you do not to supply the tool with a BIOS-Archive or a BIOS-File.
Not all MSI Retail Boards are currently supported. With every update of the USB Flashing Tool more boards will be added. At present, you can use the "SureHands" Live Update method with the following boards only (the list will be updated regularly):
AMD based boards:
K8N Neo4-F (MS-7125, PCB 3.0)
K8NGM2-FID (MS-7207, PCB 2.0)
K8N Diamond Plus (MS-7220, PCB 1.0)
K8N Neo3 (MS-7135, PCB 1.0 & 2.0)
K9A Platinum (MS-7280, PCB 1.0)
K9A2 Platinum (MS-7376, PCB 1.0)
K9A2 CF-F (MS-7388, PCB 1.0)
K9N Neo-F (MS-7260, PCB 1.0 & 2.0)
K9VGM-V (MS-7253, PCB1.0)
K9N2GM-F V2 (MS-7509, PCB 1.0)
K9N Neo V2 / V3 (MS-7369, PCB 1.1)
K9N Platinum & K9N SLI Platinum (MS-7250, PCB1.0)
K9N2 Diamond (MS-7375, PCB 1.1)
K9N2 SLI Platinum (MS-7374, PCB 1.1)
K9N2 Zilent (MS-7374, PCB 1.1)
K9N2 Neo-F (MS-7511, PCB 1.1)
DKA790GX Platinum (MS-7550, PCB 1.1)
790FX-GD70 (MS-7577, PCB 1.0)
790GX-G65 (MS-7576, PCB 1.0)
Intel based boards
HydroGenX48C & X48C Platinum (MS-7353, PCB 3.0)
X48 Platinum (MS-7353, PCB 1.0)
X38 Diamond Plus
X38 Diamond (MS-7353, PCB 1.0)
X38 Platinum (MS-7353, PCB 1.0)
EFINITY-FP (MS-7395(E), PCB 1.0)
P35 Neo Combo-F (MS-7365, PCB 1.0)
P35 Neo2 Series (MS-7345, PCB 1.1)
P35 Platinum (MS-7345, PCB 1.1)
P35 Neo-F (MS-7360, PCB 1.0)
G33 Platinum (MS-7345, PCB 1.1 & PCB 1.2)
P965 Platinum (MS-7238, PCB 1.1)
975X Platinum PowerUp Edition (MS-7246, PCB 2.1)
865PE Neo2-P Platinum Edition (MS-6728, PCB 2.0C)
P7N SLI Platinum (MS-7380, PCB 1.0)
P7N2 Diamond (MS-7523 PCB 1.0)
P7N Diamond (MS-7510, PCB 1.0)
P7N SLI Platinum (MS-7380, PCB 1.0)
P6N Diamond (MS-7320, PCB 1.0)
P6N SLI Platinum (MS-7350, PCB 1.0)
P6N SLI-FI (MS-7350 PCB 2.0)
P6N SLI V2 (MS-7346 PCB 1.0)
ECLIPSE SLI (MS-7520, PCB 1.0)
ECLIPSE Plus (MS-7566, PCB 1.0)
P35 Neo3-F (MS-7395, PCB 1.0)
After selecting "SureHands" from the option box, the tool will automatically check for all available official BIOS-Versions for your mainboard. It will also look for the latest available BETA BIOS Version for you board and save that information in a TXT-File on your Desktop:
Note: The SureHands option will not provide you with the latest BETA BIOS, it will only provide the information.
When the tool is done scanning for official BIOS releases for your board, it will give you the possibility to manually choose the BIOS Version you want to flash. SureHands Live Update will not automatically select the latest version and use it for flashing, it will give you the chance of choosing between all available official BIOS releases that are available:
Note that the "May not exist" comment that appears behind some versions does not mean that the BIOS does not exist. If you know the latest BIOS for your board is e.g. v1.8, SureHands will retrieve it even though there may be such a comment. That message is part of a prediction feature that tries to determine future BIOS Releases. If a BIOS version that was predicted by the SureHands feature is not available yet, the tool will tell you if it cannot retrieve the files and ask you to select an earlier version.
3.4 Geometry Change
If the tool fails to make your USB storage device bootable then you will need to use this mode. It will make your drive bootable, select it:
Select your drive then let the tool do it's business.
Once the process is complete, run the tool again via method 1, 2 or 3, restart your computer and try booting from the USB storage device again.
NOTE: This method will destroy ALL data on the USB storage device!
NOTE: This method is available in v1.17 and beyond.
4. Selecting the USB Flash Drive for preparation
When you have chosen one of the three methods from the option list and pointed the tool at the corresponding archive, BIOS File or selected the desired BIOS Version from the list in case you chose to use SureHands Live Update, the MSI Forum HQ USB Flashing Tool will prompt you to enter the drive letter of the USB Flash Drive you want to use for flashing:
Note that certain drive letters are reserved and will therefore not be accepted by the tool (currently A:, B: and C:). If you are sure you have connected an USB Flash Drive to the system that works properly but it does not appear in the table that appears in the DOS box, enter the corresponding drive letter anyway and see if the tool accepts it. This can happen in rare cases, but it is usually no problem.
The tool will check the selected drive and will provide you with status messages. If everything is okay, the message should look like this:
The tool will attempt to make the device bootable and automatically write all files that are needed for flashing to the drive to prepare it for flashing. If the procedure was successful, you will get the following message in the DOS box:
5. BIOS-Settings, Booting & Flashing
If the Tool has prepared your drive for booting & flashing, no BIOS flash attempt has been made yet. Only the preparation process. In order to initiate the flashing procedure, you have to restart your system and make it boot from the USB Flash drive. Before you move on to do that, enter the BIOS Setup and check a few options:
5.1. BIOS Settings to Check
Check USB-related Options in BIOS:
- USB Controller
- USB 2.0 Controller
- USB Legacy Support
- USB Storage Support
- Boot from other devices
- etc.
Not all of these options may be found in BIOS and the precise name may vary as well. Just make sure you checked for such options and that they are enabled (if present).
Another option you should check for is "Boot Sector Protection". If such an option is present in your BIOS, make sure it is disabled because it may make a BIOS Flash impossible.
@all Overclockers: In case your system is currently overclocked, make sure you roll back to default clock and voltage settings before you attempt to start the flashing procedure. Otherwise you increase the risk of an unsuccesful flash, and you most probably don't want something like that to happen.
5.2. Booting from USB Flash Drive
To boot from your USB drive you can either change the boot sequence in BIOS accordingly or just press F11 during POST* to get access to the BIOS Boot Menu. From here, you can select you drive directly without having to adjust the boot sequence in BIOS. Note that your USB Flash Drive may be listed as a hard drive (if you choose that entry you will get another list to choose from).
* Not all mainboards use F11, for the boot menu. If F11 fails for you, please consult your manual for the correct key.
Note: If you have problems booting from your drive, look at the FAQ-Section of this guide and see if any of the tips resolve the issue.
5.3. Flashing Procedure/Running MemTest86+
As soon as the system boots from the drive, DOS will be loaded and you will be displayed with two options. One option will start MemTest86+, the other will begin the flashing procedure. If no choice is made, MemTest86+ will automatically start.
The flashing procedure will automatically be initiated from there. You will see status messages on the screen that will supply you with information and also prompt you for final confirmation for the actual BIOS-Flash. A backup of you current BIOS will automatically be saved to a file on the drive (backup.bin) before the flashing actually starts. You do not need to enter any commands in DOS. All you have to do is acknowledge the information on the screen by pressing a key.
The flash itself will only take a couple of seconds (20-30s at the most). If the flashing is successfully completed, shutdown the system and clear CMOS with main A/C power cable removed from PSU. Read the >>Clear CMOS Guide<< for further information.
After clearing CMOS you have completed the BIOS-Flash.
Guide created by Jack The Newbie and the forum team

Version updated to 1.18x:
* Mode 3 Sure Hands, Live Update:
- Removed beta BIOS query check[global]
- Fixed issue K9N2 Diamond unable to be detected as supported unit if onboard is installed BIOS version 2.4,
add dynamic detection for future versions.
- Fixed issue 790FX-GD70 unable to be detected as supported unit and add dynamic detection for future versions.
- Fixed issue 790GX-G65 unable to be detected as supported unit and add dynamic detection for future versions.
- Add support for 785G-E65, add dynamic detection for future versions, prediction BIOS range 3.1 - 3.A
- Add support for 785G-E53, add dynamic detection for future versions, prediction BIOS range 3.1 - 3.A
- Add support for 790GX-G65 Winki ED, prediction BIOS range 2.1 - 2.A
- Fixed issue P7N Diamond unable to be detected as supported unit if onboard BIOS installed is 1.3 and above,
add dynamic detection for future versions.
- Add support for K9A2 Neo2, prediction BIOS range 7.4 - 7.D
- Add support for 790XT-G45, prediction BIOS range 2.2 - 2.B
- Add support for 770T-C45, prediction BIOS range 8.4 - 8.D
- Add support for 770T-C35, prediction BIOS range 8.4 - 8.D
- Fixed issue K9A2 Platinum[V1,V2] unable to be detected as supported unit if onboard BIOS installed is 1.9,
add dynamic detection for future versions, prediction BIOS range extended to 1.F0
- 790GX-G65 board prediction BIOS range extended to ver: 1.D0
- 790GX-G65 board update bios base ver from 1.xx to 4.xx [following new msi rule for this board jumping from 1.xx to 4.xx]
- Add support for 770-C35|C45 boards [p1] BIOS range 1.40 - 1.D0
- Add support for 770-G45 board [p2] BIOS range A10 - AA0
* Add "Exit" option to navigation screen
* Update version info related to boot part
* Update boot part to handle newest features
* Modify Self update sequence of Installer version
* Update internal version check ID
* Mode 4 minor update
* Build and add new Tool's module for newest features
* W32 Tool's exit time part decreased by 10 seconds
* On received OS reboot user request, time delay before execution decreased by 15 seconds
* Update EC decoder
* Update start-up information screen
* Auto store start-up detected information to user's desktop ==> [MSIHQ_INFO.TXT]
Details:
Easy to show machine information on request, instead write down from the screen manually, now just copy/paste can be used from MSIHQ_INFO.TXT
User can check and compare information before and after the BIOS update
Also usefull if didn't remember what was his original BIOS or EC versions before the update, Tool will auto store it there.
And easy can be checked if needs. E.g Tool's log file of each Tool's execution, each report will include date and time as well.
F.A.Q example:
Q: I flashed BIOS on my notebook and now it doesn't work properly.. And i don't remember what was my old BIOS version.. What can i do?
A: Take a look in MSIHQ_INFO.TXT at your desktop, there is auto recorded your detailed information about your notebook before the BIOS update.
So you can easy find what was your original BIOS & EC versions.
Is it OEM one or not, and the exact original BIOS & EC versions.
So you can roll back easy or if crossflashing were done to reflash to correct versions.
Example question:[this board now use 4.xx bios, but don't have time to make a new images.]
It's just example, do not mean that this BIOS used in the example is bad. But generally often can need to roll back to older version.
Or to use Sure Hands because[The BIOS is N/A for manual download, By SureHands no need to browse/search/download and point to the BIOS version, also eliminate any chances to pickup the wrong BIOS, and not at last its more quickly[save a time]]
Q: I flashed my BIOS via MSI Live Update, but the new BIOS has an issues.
How i can roll back to my old BIOS version?
The MSI LiveUpdate can only update to the latest BIOS version, which is not good for me.
And i can't download my old BIOS version manually... Because "This BIOS can only update via Live Update function"
http://eu.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1739
How i can re-flash to my original BIOS version and from where can i get it?
A: Run >>Use the MSI HQ Forum USB flasher<<,
then choose Mode 3 [Live Update{aka SureHands}]:
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 21:09:45,15
Mainboard: 790GX-G65 (MS-7576)
PCB Version: 1.0
BIOS Version: V1.3
BIOS Date: 05/08/2009
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 21:22:38,42
Mainboard: 790GX-G65 (MS-7576)
PCB Version: 1.0
BIOS Version: V1.6
BIOS Date: 11/30/2009
Then choose your old BIOS version from the list:
The followed image used below is a sample from Eclipse board,[no time to make accurate image] but will look similar for others boards too:
In a list will be noticed that there is a future BIOS versions.
Some of them will be not released yet. If you pick some of those the Tool will note you:
It's a part of Tool's BIOS prediction system called "Crystal Ball", when MSI release a future BIOSes for your board,
Tool can find them immediately. By that way the Tool no need to be updated to be actual in each moment
* Add new feature "True BIOS Version Ready"
- Updated Mode 1
- Updated Mode 2
- Updated Mode 3
Details:
Q: What "True BIOS Version Ready" means? Does the Tool show the wrong BIOS version until now?
A: Of course not, the Tool always show accurate info.
The same as CPU-Z/Everest of whatever other Tool.
However Tool also detect EC-FW versions for notebooks:
The "True BIOS Version Ready" Tool's feature is aimed to eliminate user's mass confusion about MSI BIOS versions.
And not only users are confused, but MSI's Live Update is confused too... which confuse users even more..
Few typical real examples of confusion:
"K9A2 CF wont flash to Bios v. 1.A !!!"
Quote from: Fingon on 25-October-09, 16:53:15
Hi MSI,
I have a problem. I have bought a new processor: AMD Phenom II x545. I looked on the support page of my MB (MSI K9A2 CF) and there the CPU is supported from the bios version 1.A. So I wanted to flash the Bios the the newest version (1.A). I used the MSI live update 4 program to flash it via windows mode. But everytime it boots it writes "CMOS checksum BAD", then I hit F1 to Bios and I see the version of my BIOS fell to the oldest version 1.1. Then I tried to flash it thru Flash disc (with boot files) and dos mod. The result is the same. I can flash my MB to version 1.8 but when I try the 1.A it wont flash it and my Bios fell to the oldest version (1.1). I realised that the exe files in version 1.1-1.8 are the same (afud412.exe) but the exe file in 1.A is different (afud4310.exe).
My questions are:
1) How to flash my MB to the version 1.A ?
2) Is version 1.A really needed for AMD Phenom II x545? I guess yes, because CPU was avaible in July 2009 and the bios 1.A went out in June 2009. I am able to flash it only to version 1.8 (december 2008).
Thank you for any help!!
EDIT: After reading this topic: https://forum-en.msi.com/index.php?topic=129204.0 I realised I have the VERSION 1 of this board (I purchased it right after the launch of the MB (November 2007). It means it doesnt support CPU over 95W, but my Phenpom II x545 has only 80W. I still cant update Bios to the 1.A version.
So my third question is:
3) Is the Bios update 1.A only for version 2 of this MB?
Thx for replies!
Quote from: Jack t.N. on 25-October-09, 17:16:16
A CMOS Checksum error is normal and expected after a BIOS Flash and/or a CMOS Clear. The fact that this message appears, shows, that there was actually something programmed to the chip.
If you haven't done that yet, please clear CMOS with the main A/C power cable removed from your PSU and load "Optimized Defaults" in BIOS Setup.
The BIOS Version should be shown on the POST Status Screen and there should be a date behind it. Please check the BIOS Date and write it down:
Are you absolutely and entirely sure that what you see is "1.1" and not "1.10"? Because v1.A0 is actually just the hexadecimal notation for v1."10" (one dot ten). The hexadecimal notation is only used in the BIOS File Ending. Once flashed, the BIOS will not identify itself in hexadecimal notation but in decimal code (which means you will never see "v1.A0" after the flash but "v1.10" instead.
Here is a piece of well-meant advice for now and the future: MSI Live Update should be avoided under all circumstances when it comes to BIOS Updates and/or information retrieval regarding your current BIOS Version. Why? Because this tool is stupid and one of there most risky applications for performing a BIOS Flash. Please uninstall it completely.
Why do I call it stupid? I call it stupid because it does not differentiate between hexadecimal notation and decimal notation. It will show you that "v1.A0" is available. The it will flash it, if you allow it to do so. Of course, a v1.A0 Version will always come out as "v1.10" (one dot ten). When you re-run MSI Live Update it will not recognize that v1.A0=v1.10 and tell you again that there is a newer version available (1.A0, which, again, is the same as v1.10, which was just properly flashed).
I believe that the update went just fine, that you are currently using v1.A0=v1.10 and that MSI Live Update is actually just creating a pseudo-problem which is currently confusing you. The pseudo-problem will immediately be out of the world, if you uninstall MSI Live Update and rely on the BIOS ID String as it appears on the POST Status Screen (this includes the date shown there).
If a BIOS Update should ever be necessary again, please make sure that you won't use MSI Live Update but >>Use the MSI HQ Forum USB flasher<< instead.
Quote from: Fingon on 25-October-09, 18:03:44
Thank you for the quick reply!!
Thats exactly what I have JUST found in this post by Svet: https://forum-en.msi.com/index.php?topic=127672.msg974800#msg974800
Yes it is 1.10 of course!! I didnt know that 1.10 = 1.A0 ! Thank you for the reply. Then the MSI live update 4 program is dump that he wanted from me another update of Bios.
So thank you! Problem is solved.
Edit: Yes, because of MSI live update I learned how to flash bios via flash disc. :-) But I was still confused by that 1.10 and of course by program saying me I should update again.. :-P
Quote from: Lostsoul777 on 14-August-09, 05:46:25
I had the same problem with 1.90 bios, so i updated to 1A, i just want to know why Bios Version says: v.1.10 instead v.1A?
Quote from: LinuxGuy on 29-December-09, 01:17:45
My computer does not have a floppy drive. How do I update the BIOS? (I tried the online utility 3 times. It always updates the BIOS "successfully" and when I restart my PC, I have to do either F1 to config or F2 to load setup defaults. So it looks like it's working, but the online update says that I have versions H.10 and version H.A0 is available (or maybe the other way around). So either the BIOS is getting updated, but the online tool is not recognizing this or it's not getting updated. Either way, I would like to manually flash it in DOS. Is it safe to burn the setup files to CD and boot from CD into DOS?
That's the same BIOS version... Just the "MSI Live Updater" is not very smart...
H.A=H.10=17.A=17.10 [A=10, H=17], the last "0" suffix in H.A0 means its official version.
Quote
I tried the online utility 3 times. It always updates the BIOS "successfully" and when I restart my PC, I have to do either F1 to config or F2 to load setup defaults.
So it looks like it's working, but the online update says that I have versions H.10 and version H.A0 is available (or maybe the other way around).
So ignore this MSI Live Updater's no sense, and stop flashing your BIOS. You already have the latest version installed.
The Tool now will detect and shows BIOS versions alias when the MSI BIOS version is known with more than one name.
So no more flashing and flashing and flashing to the same version because of MSI LiveUpdate suggest again BIOS update...
Also no more confusion:
"What's my BIOS version?" -> I flashed my BIOS to 1.A0 [A7520IMS.1A0], but BIOS says its 1.10
And MSI Live Update also says that i have 1.10 and 1.A0 is available and i should update it. I flashed it again, but its still 1.10?
What's going on?
Just run the MSIHQ USB Flash Tool and will show you all that you need to know
Examples[with real/accurate info]:
MSI Eclipse:
BIOS version 1.9:
BIOS version 1.10:[Tool now shows both BIOS versions alias]
Report stored respective in MSIHQ_INFO.TXT at user's desktop:
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 5:30:55,34
Mainboard: Eclipse SLI (MS-7520)
PCB Version: 1.0
BIOS Version: V1.9
BIOS Date: 09/22/2009
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 5:37:25,66
Mainboard: Eclipse SLI (MS-7520)
PCB Version: 1.0
BIOS Version: V1.A (aka Version: V1.10)
BIOS Date: 10/27/2009
More examples =>K9N6SGM-V / K9N6PGM-FI / K9N6PGM-F :
More examples =>945GCM5-F V2 (FSB 1333) :
Report stored respective in MSIHQ_INFO.TXT at user's desktop:
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 5:47:34,35
Mainboard: MS-7267
PCB Version: 4.0
BIOS Version: VH.9 (aka Version: V17.9)
BIOS Date: 11/20/2008
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in ба 30.12.2009 Ј. at 5:52:46,26
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VH.A (aka Version: V17.10)
BIOS Date: 06/02/2009
More examples =>780GT-E63 [N/A at MSI web yet] :
For MSI Notebooks such decoding isn't need, examples:
* Add new feature "Triple BIOS flash Recovery Ready"
- Updated Mode 1
- Updated Mode 2
- Updated Mode 3
Details:
The feature include 3 auto prepared BIOS backups for followed purpose:
* Internal BIOS recovery:
- In a failure case Tool perform auto flash recovery [3 attempts, check for success after each and stop flashing if successful] before give control to BK_IO2, notice users about results and give control for manual attempts[if need]. [This a case if system isn't lockup/reboot, if bad flash occur]
- This mode also have own store up to 5 backups[+1, the last saved copy is always backup.bin, if there was older one they become backup1.bin .. till 5]
* BIOS backup stored as AMIBOOT.ROM [AMI BIOS only] [Auto clean up older if there is any, before take a new backup to avoid recovery confusion]
* BIOS backup detected and stored for M-Flash style boot/recovery [AMI BIOS only] [Auto clean up older if there is any, before take a new backup to avoid recovery confusion]
Performing test simulations with random generated BIOS versions[including betas] for M-Flash boot/recovery style, some examples:
Copy/paste Tool log file:
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:00:53,46
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VD.XB2 (aka Version: V13.33B2)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.DX2
Where:
* V13.33B2 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VD.XB2 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.DX2 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:12:23,95
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VK.VB7 (aka Version: V20.31B7)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.KV7
Where:
* V20.31B7 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VK.VB7 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.KV7 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:18:34,46
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V3.9
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.390
Where:
* V3.9 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* MSIHQ Tool "True BIOS Ready" detection feature isn't need here, since this BIOS version can be known only with one name.
* A7267IMS.390 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:22:24,04
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V8.1B9
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.819
Where:
* V8.1B9==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* MSIHQ Tool "True BIOS Ready" detection feature isn't need here, since this BIOS version can be known only with one name.
* A7267IMS.819 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:25:38,51
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V4.E (aka Version: V4.14)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.4E0
Where:
* V4.14 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* V4.E ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.4E0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:28:16,62
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V1.BB1 (aka Version: V1.11B1)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.1B1
Where:
* V1.11B1 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* V1.BB1 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.1B1 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:31:57,78
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VI.FB5 (aka Version: V18.15B5)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.IF5
Where:
* V18.15B5 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VI.FB5 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.IF5 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:36:02,40
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: V7.O (aka Version: V7.24)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.7O0
Where:
* V7.24 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* V7.O ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.7O0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:39:11,84
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VC.8B6 (aka Version: V12.8B6)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.C86
Where:
* V12.8B6 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VC.8B6 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.C86 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:49:38,46
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VG.PB6 (aka Version: V16.25B6)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.GP6
Where:
* V16.25B6 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VG.PB6 ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.GP6 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
MSIHQ: Report generated in 03.01.2010 г. at 7:53:17,26
Mainboard: 945GCM5-F V2 (MS-7267)
PCB Version: 4.0
BIOS Version: VU.H (aka Version: V30.17)
BIOS Date: 06/02/2009
Co-respond BIOS backup created ==> A7267IMS.UH0
Where:
* V30.17 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
* VU.H ==> MSIHQ Tool "True BIOS Ready" detection feature
* A7267IMS.UH0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]

MSI - FX5900SP-VTD128 - Need bios

Anyone got a MSI - FX5900SP-VTD128 with the original bios? I really need it...
Thanks

There are no up-to-date Performance BIOS Versions available for your mainboard. If Performance BIOS Versions ever existed, they were released in the early BIOS Development Phase for testing purposes. To be honest, I have not come across any Performance BIOS for your board yet and it is also highly questionable if such a BIOS would help you in any way (if it existed). Whatever problem there is (or not is) does not necessarely have much to do with the BIOS you use.
If you need help and advice on overclocking, please open your own topic in the OC Section of this forum, provide FULL system specifications (read the >>Posting Guide<< first) and post a list of your current Cell Menu settings for comparison.

MSI Geforce 3 WDM and bios problem plz help!!!

Hi
I have a MSI Geforce 3 Ti200 Pro-VT and when i install any detenator driver above 23.11 then the capture card wont work! The driver for the capture device says it wont start so i am stuck with 23.11. I have tries later WDM drivers and detenator drivers but they all give the same problem! I have also tried to flash the bios but live update 2 says Your Display Card does not support MSI Live Update 2 function which it is supposed to have. When i go directly to the bios page and try to update it then the update fails. The flash program seems to think that i have a different card or something but my system information says that i do. This it the information:
VGA Card Manufacturer MSI
VGA Card Model Name MS-8850
VGA Card BIOS Vendor NVIDIA
VGA Card BIOS Version 3.20.00.18.03
VGA Card Driver Version 2311
Can someone please help me cause it would be nice to have the latest drivers working for the card.
Thanks
Nixus

I downloaded the bios files from http://tw.msi.com.tw/autobios/SVga/Bios/Ms8850/v111/ and then downloaded NVFLASH.EXE and booted in dos and flashed the card i had to force the flash though it had some conflict of data or something but i knew it was the right bios and i had made a backup of the current one plust the card has dual bios so i wasnt too worried and it all worked out fine.
Goodluck with gettin all your cards workin
Cheers
Nixus

Msi z97 gaming 5 bios update help

Hello I recently purchased the msi z97 gaming 5 motherboard. It was working fine it came with bios version 1.0 and I wanted to update it. I downloaded the latest 1.5 bios from msi website copied to usb flash drive and flashed it using mflash. Computer powers on but black screen wont do nothing. I cleared cmos and battery and still nothing so I am pretty sure its bricked. I am going to store to exchange it for another one but I want to be able to safely update the bios without bricking again. I usually dont update bios unless needed but i need at least 1.2 bios to fully support the devils canyon cpu. Can someone please point me in the right direction? I read about the usb flashing tool in forum but also read that bios+me need to be flashed and I don't know if that program is up to date and will flash both files? I really appreciate it if someone helped thanks in advance.

Also does anyone know if it is dangerous to update the bios with a 4690k devils canyon cpu since it is not officially supported until 1.2? Is that why my first bios flash was bricked? I would hate to go and borrow another cpu just to update the bios but if I have to I will. Sorry for all the questions but I need to get my bios updated and I will not update it until I am sure of all these things. Thanks to anyone who answers these questions.

MSI FM2-A75MA-E35 BIOS Flash

I recently had an apparently unrecoverable BIOS flash failure which I RMA'd (although I have since found http://service.msicomputer.com/msi_user/TechFAQdetail.aspx?formid=3046). Since I now flash successfully in that same way, my best guess is that the original board really was defective. The advice on this forum generally is to use the MSI Forum HQ USB Flashing Tool, which obviously has had a great deal of development effort. I did try that Flashing Tool, but found it more confusing than I had hoped, and the flashing did not complete for me. Given my previous msi BIOS flashing experience, that was scary. Then I used the msi on-board flashing (as I did originally) with a downloaded file in the root of a USB flash drive. Inside the BIOS, Utilities > M-Flash > Select one file to update BIOS, started flashing and did work, and has since worked several times.
The advice to use the Flashing Tool apparently relates to the Tool working "better" (perhaps with lower chance of failure) than the on-board BIOS flasher. And it may BE better, but flashing should not be error-prone anyway, nowadays! USB flash drives have been around for many years, we use them all the time, and they do not need a special flashing tool. Frankly, I feel that if the on-board flasher does not work, the board is just defective, end of story.
Since I would have been better off with some idea about what to expect, here it is: On my system, BIOS flashing takes MUCH LONGER than one might expect. Overall, it takes about 4min 30sec (for only 8MB), which appears to be only about 30kB per second. The display shows flashing to be about 50percent done in about 3min, then it runs up to 90percent in about 10sec more. At about 95percent done (about 3min 30sec), the screen blanks and the system starts to auto-reset, which appears to happen slowly, and twice, before coming up at about 4min 30sec.
Hope this helps!

This board in particular can be flashed properly with the MSI BIOS flasher ,M-Flasher .It s practically as safe as the Gigabyte one.
I have flashed the BIOS with the M-Flash from 1.2 to 1.5 with no problems on this board.
Use a USB stick formated to FAT and you are good to go as long as you already done some stability teats for the machine.
Yes after the Flash the screen may remain black ,but that is why you have on the board a Clear CMOS jumper ,in the lower left side.
Maybe some users should let the flashing process to people that know how to do it and stores can do this procedure for you.

MSI KT3 Ultra ARU BIOS FLASH

currently trying to flash my bios upto the current release to attempt to fix a problem that seems i am not the only one to have and have tried every other solution provided.
Now i have flashed many a bios before but never this one....my current version is 5.1 and i am trying to install 5.7. Here's the problem.....when i load dos from a win98se startup disk i goto the c: drive and then run a "dir" to get the list......however instead i get a "file not found" for the whole drive (i am guessing do to it not being able to read a FAT32 partition/drive). so i am able to copy the bios flash files to a ramdrive that the startup disk creates on boot but i am reluctant to install from there as i don't want to fuxor something up by doing so. i would just install them from a floppy but the instructions that come with the flash file say specifically not to install from a floppy (though no reason for this is given).
My questions are these:
1. can i copy the files to the ramdrive and install the bios flash from there without having any problems that anybody knows of?
2. why can't i just install the flash from floppy? i've never run into this on any other boards is this an MSI thing
3. is there a place that i can get a bootdisk online that will allow me to read the fat32 disk so that i don't have to worry about any of the above solutions that i have come up with?
any help with this stuff will be greatly appreciated
tia
Aaron

nevermind i figured it out thanks anyway

I have a MSI K9A2 Platinum Motherboard. Bios version 1.8 overclocking

I have a MSI K9A2 Platinum Motherboard. Bios version 1.8
AMD Phenom II X4 940 3.0 GHZ that I have over clocked to (17.5) 3.4Ghz
However anytime I go over that to say multiplyer set to 18 (3.5 ghz) it still runs but crashes when running high end games. I know I have to go in an adjust voltages. However, in the cell menu I can't access the CPU voltage areas I hit enter but nothing happens. It tells me Grey is defualt, White is stable and red is the obvious not recommended setting, but again I can't access it. Is there something I need to disable before I mess with the voltages?
I know that doing any of this could fry the chip I have liquid cooling pretty much this idles at 28 deg Celcuis, that is with it over clocked so I know I have som room and know I should only up the vltage slightly. I just need to know how to do it.
I also wanted to adjust the FSB from the current 200 to 270 which I was told is possible with this board and also that is where it should run stable. Again I just need to know how to access these things in the Bios. If its a bios issue I can update to the next one,1.9, but did not see the need to do so. Anyways any help is greatly appreciated. I am familar with overclocking just not with this motherboard. Any user who uses MSI who could offer assitance would be greatly appreciated. Thanks.
Windows 7 64bit Proffesional.
AMD Phenom II X4 940 3.0Ghz (OC to 3.4)
Liquid cooling
MSI K9A2 Platinum Bios release 1.8
6 GB of DDR2 (800) Memory
2GB Radeon 4870 X2 FO
Power supply= 850 watts

Use the keyboard number pad + or - keys.

MSI FX5900SP 128VTD overclocking or bios flashing help?

Similar Messages

Maybe you are looking for