MSI - FX5900SP-VTD128 - Need bios

Anyone got a MSI - FX5900SP-VTD128 with the original bios? I really need it...
Thanks

There are no up-to-date Performance BIOS Versions available for your mainboard.  If Performance BIOS Versions ever existed, they were released in the early BIOS Development Phase for testing purposes.  To be honest, I have not come across any Performance BIOS for your board yet and it is also highly questionable if such a BIOS would help you in any way (if it existed).  Whatever problem there is (or not is) does not necessarely have much to do with the BIOS you use.
If you need help and advice on overclocking, please open your own topic in the OC Section of this forum, provide FULL system specifications (read the >>Posting Guide<< first) and post a list of your current Cell Menu settings for comparison.

Similar Messages

  • I need bios file for msi fx5900xt-vtd128, please

    please send me the bios file of these videocard   
    [email protected]

    Hi, what happend? why do you need Bios file? try installing Live update. I think several members of the forum hav that card, Osnavi if Im wrong have it. You could try also this page:
    http://www.mvktech.net/component/option,com_remository/Itemid,26/func,selectfolder/cat,81/page,4/

  • URGENT HELP: PC can't post after Bios Update on MSI NX6600GT-VTD128

    The LiveBIOS utility on my PC showed that there was an updated BIOS of my MSI NX6600GT-VTD128 that I was using and I proceeded to update using the facility.
    Everything seem fine until the system was rebooted, now the system refuse to post. All I see when I power on the system is a moment of power (e.g. I can see the lights on my keyboard and card reader), before they also disappear.
    My system is a P4 2.4 Northwood running on a MSI 875P.  I had already cleared the CMOS on my motherboard but it didn't help.  I would appreciate greatly for any advice.

    Quote from: Glenn on 24-September-06, 14:26:51
    Common mistake.
    Unfortunately, the cure is likely to be painful.
    Did you disable your Antivirus and Firwall before doing such a thing?
    Video cards aren't like motherboards, and just updating for the simple fact that it's available is wrong regarding BIOS's for anything.
    You should have a specific reason to do so.
    Now, did you backup your old BIOS?
    You may need to contact MSI directly to get the original BIOS and use a PCI video card so you can boot and see what you are doing to reflash your AGP card.
    How to contact MSI.
    Thanks for the advice.  And you are right, the cure is painful, particularly, when I didn't back up the old BIOS and neither do I have a PCI graphics card lying around.
    I did deactivated my antivirus whilst flashing, and there was no firewall running.

  • Looking for BIOS for MSI FX5900XT-VTD128

    Hello.
    I'm looking for information about flasbios for my MSI FX5900XT-VTD128. I looking for modded, or overclocked bios, or MSI 5900, 5900U, 5950 BIOS.
    Thank You for suggestion
    Piotrek

    Here's a link that can take you to what you want. Hope this helps.
    http://www.xbitlabs.com/articles/video/display/faq_8.html

  • LiveUpdate broke the bios on a MSI k8n neo v2.0, need bios and recovery files.

    LiveUpdate broke the bios on a MSI k8n neo v2.0, it need bios and recovery files. I do not know the serial number. The ERP is 070.  Its a "k8n neo v2.0" "ms - 7030 ver: 20c" mainboard.  I don't know the previous bios version.  The computer prompts for a recovery disk during an AWARD BootBlock BIOS v1.0 initialization.
    Thank You.

    Here it is
    [K8N Neo V2.0 series ==> 601-7030-070/080, BIOS 5.xx]
    Sign On: K8N Neo V2.0 Series W7030NMS V5.4 031506 14:55:37

  • Flickering in MSI 6600gt VTD128

    Hi,
    I have some problems with 6600gt AGP card i just bought.
    1. I notice constant flickering (i don't know how to name it precisely) when playing games (any game). If i move the mouse slowly, i can notice flickering on the top of the screen, looks like the lines are drawing up too slow. Even if the fps is >80 in far cry or 40fps in Half life. It's killing me :(
    2. Far cry has too much lightning in the game. I'll upload the screenshots if you need them.
    2. There's no fog in Prince of Persia: Sands of Time. If "fog" is enabled in options, i don't see anything on the screen. If i disable it, everything is just fine.
    Tested with the both cards i bought (MSI 6600gt VTD128)
    Please, help me solve at least the first problem.

    refresh overrides helped my eyes greatly. thanks most of the flickering has gone, at least my eye does not notice them. moreover, i can enjoy watching movies in lower resolutions.
    but i still have problems with the light effects. could it be a problem with my memory? just tested it with memtest and  got 2.4 GB/s in dual pc2700 mode with my celeron-d! that's really frustrating :( i think i need to upgrade my cpu and psu.
    by the way, any hint to disable fast writes on Neo2-PLS? couldn't find the option in bios.
    thanks again for the reg file.

  • Request For MSI GS70 2PC 419XFR Bios Unlock

    Hi Svet!
    Request For MSI GS70 2PC 419XFR Bios Unlock (i5&860M)
    Bios: E1772IMS.109
    Bios link: www . download . msi . com / bos_exe / E1772IMS.109.zip
    VBios: 80.04.F7.00.0E (860M)
    EC Version: 1772EMS Vers5.04
    I don't have PayPal Account - please send me some alternative donation method. (Bank Account or else..)
    Best regards, 1nS4n3.

    Quote from: alonso_91 on 26-February-14, 23:58:37
    Thank you.
    Do you need me to upload the bios file? because I believe that the msi website has the 70R archive which made my laptop useless.
    you mean you don't want latest version [70S or 70R],
    but 70J exactly?
    Quote from: alonso_91 on 26-February-14, 23:58:37
    the msi website has the 70R archive which made my laptop useless.
    how exactly? what hapends after flashing to 70R official?

  • Nvidia 650x2gig fails in MSI Z77A gd55: need NVidia drop-back card.

    Gents:
    Running UBUNTU 12.04 under:
    Xeon 1240.v2
    MSI Z77A gd55 : BIOS V1.2
    2x8 gig Crucial ram
    320 gig SATA
    "ULTRA" 650W PS @ 60 amps on 12 volt rail
    Auria 27" 2560x1440 monitor
    My legacy gtx9400 vidcard will push the monitor, but my  new purpose-bought EVGA 650x2gig fails to generate **any** response (no signal) in the monitor.  An EVGA tek said it looked to him like a mobo BIOS/vidcard incompatibility.  He advised flashing BIOS; I am very **risk adverse** and never flash  BIOS. So assuming the problem is BIOS clashing with vidcard, then I need a downmarket/older vidcard.  What is a good -- older -- midmarket Nvidia  vidcard (  AMD Linux drivers inferior ) that the V1.2 MSI BIOS can handle?   

    Thanks for your interest & comments ... I am stumbling about and know it.
    Believe me: the NVIDIA chip EVGA _650 vidcard fails totally in my system.  So you say I need BIOS V1.5 to run my 1240.v2 ... and I am **not competent** to risk that/any BIOS flash.  That's tuff-titty for me tho I get no error messages from my system.  Casual  *nix benchmarks  are respectable. Unless you consider the NVIDIA-650 vidcard failure an "error message". Very well ... I must work around that issue and not arrogantly try to do what I cannot do.  I **can** buy ( for less than $150)  & install an NVIDIA_550 vidcard ; if I think it will work. That's my question ... given that a legacy GTX_9400 works and the EVGA_650 fails, what likelihood that a last generation NV_550 vidcard works? 
    Or .. are you telling me that the early BIOS versions for the GD_55 are well&truly a mess and **nothing** may be trusted to work with them. I still will not risk a BIOS flash, but will climb down the vidcard ladder until some legacy part above the GTX_9400 works! Thanks again for your post and info.
    Quote from: flobelix on 30-March-13, 06:49:14
    Using your current cpu requires at least bios version 1.5: http://www.msi.com/product/mb/Z77A-GD55.html#/?div=CPUSupport as you have been told before. You may run into problems although it might look ok now. 
    http://www.msi.com/product/mb/Z77A-GD55.html#/?div=BIOS
    I don't know what a NV_550 should be but your GTX650 should work fine with a current bios.

  • Need bios gt70 2pc dominator 1223ru

    Need bios E1763IMS.70Y
    Not unlocked, original.

    here it is:
    http://download.msi.com/bos_exe/E1763IMS.70Y.zip

  • Need bios unlock MX60-3be

    Heya!
    I need to unlock bios on MSI GX60-3BE.
    BIOS E16FKAMS.D0K 12/02/2013
    EC VERSION 16FKEMS3 5.04 12/10/2013
    donation 2BU34312NG848840R

    hello, will work on it and send back to you after 3-4 hours when its done
    in meantime flash your bios to the latest version D0L:
    http://www.msi.com/product/nb/GX60_3BE.html#download

  • MOVED: Nvidia 650x2gig fails in MSI Z77A gd55: need NVidia drop-back card.

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=167779.0

    Thanks for your interest & comments ... I am stumbling about and know it.
    Believe me: the NVIDIA chip EVGA _650 vidcard fails totally in my system.  So you say I need BIOS V1.5 to run my 1240.v2 ... and I am **not competent** to risk that/any BIOS flash.  That's tuff-titty for me tho I get no error messages from my system.  Casual  *nix benchmarks  are respectable. Unless you consider the NVIDIA-650 vidcard failure an "error message". Very well ... I must work around that issue and not arrogantly try to do what I cannot do.  I **can** buy ( for less than $150)  & install an NVIDIA_550 vidcard ; if I think it will work. That's my question ... given that a legacy GTX_9400 works and the EVGA_650 fails, what likelihood that a last generation NV_550 vidcard works? 
    Or .. are you telling me that the early BIOS versions for the GD_55 are well&truly a mess and **nothing** may be trusted to work with them. I still will not risk a BIOS flash, but will climb down the vidcard ladder until some legacy part above the GTX_9400 works! Thanks again for your post and info.
    Quote from: flobelix on 30-March-13, 06:49:14
    Using your current cpu requires at least bios version 1.5: http://www.msi.com/product/mb/Z77A-GD55.html#/?div=CPUSupport as you have been told before. You may run into problems although it might look ok now. 
    http://www.msi.com/product/mb/Z77A-GD55.html#/?div=BIOS
    I don't know what a NV_550 should be but your GTX650 should work fine with a current bios.

  • Compatibility between MSI NX6600GT-VTD128 and motherboard

    Hi guys, I want to know if there's compatibility between my motherboard "MSI 875P Neo-FIS2R AGP8X" and the "MSI NX6600GT-VTD128" because I want to buy this Video Card but my doubt is about the compatibility or maybe some errors, and I have a 400W Power Supply.. that's ok for this video card?... thnx !!!

    hi, how are you.
    wel there are no cmpatibility issue with this motherboard and the video card... or i am not notify about...
    but do you have to give "us" (all posiblle reply) more info about your pc, anyway the only limitation about it's the slot used, that motherboard uses agp8x and you have to buy a 6600vtd agp 8x, because thera are one model pci express that's all
    the power issue: not a issue realy 400w power source are just enough
    th real monster are hte 6800 family that need  470w or something like that to work fine
    ok i hope  best to you and your newer card, and tellme how works this magnificent piece of technological art(in middle rank) and the capture feature with onchip video processor
    byee!!  

  • ISSUE: msi P55 CD-53, Bios Rev 1.B (2011)

    ISSUE: msi P55 CD-53, Bios Rev 1.B (2011)
    I updated from BIOS ver 1.1 to 1.B, and everything went pretty well.
     I'm having an issue however with the JMicron PCI Express to SATAII Host Controller ROM v 1.07.14, it says "Detecting Drives, Please wait..."
    ...and it takes about 3 minutes, whereas before, it only took a few seconds. This means every time I boot or reboot my PC, 3 minutes is added to that time while the JMicron controller seems to be having a problem.
    I'm not happy about adding 3 minutes to my boot time
     I would like to know:
    - Is this the normal expected behavior?
    - Is 1.B a beta BIOS revision?
    - Is anyone else having this issue?
    - Is there any way to fix it?
    Your help is greatly appreciated.

    Please supply full system spec. >>Posting Guide<<
    We shall assume that you did load all the needed drivers. See here for the last drivers: http://www.msi.com/product/mb/P55-CD53.html#/?div=Driver&os=Win7%2064
    You may have to flash back to the previous BIOS to confirm if your BIOS flash was the cause.

  • MSI GE60 0ND Unlocked BIOS

    I've cross-flashed my MSI GE60 with the Win8 BIOS (E16GAIMS.513). Now I want to revert back to the Win7 BIOS (E16GAIMS.10F), but I can't - "Error: unable to start a secure flash session". Now brightness control doesn't work anymore.
    Can you modify the E16GAIMS.10F for me, that works to re-flash and unlock the BIOS options so I can disable/enable UEFI Boot etc.?
    Would be really appreciated!
    Thank you.

    Quote
    Edit: Need this one signed and unlocked (all options): http://www.msi.com/service/download/bios-18520.html
    So it won't tell me "Error: unable to start a secure flash session" anymore
    yes, i got what you need.
    Quote
    Could you tell me which donation amount is appropriate for you? You're always writing it's down to people's possibilities but I really have no idea how much to donate.
    check PM

  • MSI GE60 ONC Unlocked BIOS Request

    Laptop MSI GE60 0NC-497XRU
    BIOS Version E16GAIMS.10F
    EC Version 16GAEMS1 Ver4.04
    Is there a unlocked version of this model?
    With Best Regards)

     I need to disable some options, such as "Execute Disable Bit", and access the BIOS item "Switchable Graphics", to turn off the built-in Intel HD.
    something like this 

Maybe you are looking for