Msi fx5900xt vtd128 FRIED!!! :(

nVidia Drivers
hi all,
can any one help me out, my vga card as mentioned above has fried. there is a small chip at the back just underneath the lettering that looks to me damaged. i have emailed msi but the person on the other dont seem to understand a thing he gave me one reply three times. i asked the person to luk at the fried chip and tell me if it can be repaired or not? no reply. i asked him what the repair centre address for AUS is. guess what no reply. i wanted to give the picx of my fried card but i dont see the attachment and i dont have sites at the moment to upload the picx.
can anyone help me out????
can anyone can a picx or get a picx of the back bottom left hand side close up picx.
mitesh
>:( :(

Quote
Please send your card to your vendor, the vendor is responsible for the faulty card. or else, we have a repair centre in AUS, you may contact them directly
KXXX XXXX
MSI Computer Australia
Tel : 61-2-97480070 (ext. 110)
email : [email protected]
Is that the first e-mail they sent you? Am I supposed to read from the bottom up in your PM?
From what I understand you are not listening to what they are saying and you need to contact Australia and the phone number and e-mail is right in front of your face..
No wonder they keep sending you the same thing...it's probably in hopes you finally understand?
Am I missing something?
I can post the whole thing and we can disect it all right here. You may have to call them as e-mail in any case is not always the best means for communication..

Similar Messages

Looking for BIOS for MSI FX5900XT-VTD128

Hello.
I'm looking for information about flasbios for my MSI FX5900XT-VTD128. I looking for modded, or overclocked bios, or MSI 5900, 5900U, 5950 BIOS.
Thank You for suggestion
Piotrek

Here's a link that can take you to what you want. Hope this helps.
http://www.xbitlabs.com/articles/video/display/faq_8.html

I need bios file for msi fx5900xt-vtd128, please

please send me the bios file of these videocard
[email protected]

Hi, what happend? why do you need Bios file? try installing Live update. I think several members of the forum hav that card, Osnavi if Im wrong have it. You could try also this page:
http://www.mvktech.net/component/option,com_remository/Itemid,26/func,selectfolder/cat,81/page,4/

VCR capture FX5900XT VTD128

I have connected the vcr to the video in of the card using the RCA to S-Video connector supplied with the card. All drivers are installed including the capture drivers.
I can't find a way to capture (even see) the output from my vcr. Should this be possible and if so how?
There does not seem to be any tv tuning capability so how does the card know where to look for the signle? Or am I missing something in the driver install and should have a tv turner device?
System
P4 3.2G
Asus P4P 800 Motherboard
MSI FX5900XT VTD128
1G ram

You are confusing RF-in (or aerial input) with video-in (or TV-in). Cards with an inbuilt TV tuner, which your card lacks, have an RF-in socket into which one usually connects an aerial; and with the appropriate software one can search the RF spectrum for a TV station's broadcast frequency in the same way a radio is tuned to a particular radio station. The Video-in socket takes a different kind of signal and gets it direct from a video device. There is no tuning.
Get some video capture software. AmCap is pretty basic. Once installed select S-Video input from Options -> Crossbar, then select Options -> Preview and you should be getting a picture.
Tony.

Msi Fx5900xt Bios

Does anyone know where there is a copy of the MSI BIOS for the MSI FX5900XT - VTD128?
My BIOS has become corrupted and I cannot use the Live BIOS Update to recover.
I have searched on the MSI website and cannot find.
I have also contacted MSi Technical Support but they are slow in responding.
Please help; I have a copy of FarCry that needs to be played
Thanks

Deathstalker - relax !
No need to get excited.
I was experimenting. I knew the risk and I'll live with it. It's not the end of my world and I'm not complaining.
I asked if someone could help. Noone did and as it turns out I was able to find the file myself.
My new keychain is driving Farcry at maximum resolution and colors.
Thanks for your kind thoughts and support

No Games CD in my FX5900XT-VTD128?

Just bought a new FX5900XT-VTD128 from NewEgg here in the US. Got 2 cds with the card: a Drivers/Utils disk and a WinDVD Creator disk.
From the MSI web site, it would appear that 3 full games and 14 trials are missing from the box.
Was I supposed to get another CD or 3? How would I go about getting these?
Thanks,
Michael
wexler at yahoo dot com

Excellent point, Sonofabob. Yes, I did get the VIVO version, and I didn't look at the pictures of the includeds. Instead, I compared the model name to the info on the MSI site, and I didn't think that MSI would list one thing... but Newegg would sell it differently.
To be fair, Buy.com also doesn't mention any games software in its product listing. But reviews like http://www.bit-tech.net/review/317/3 show stacks of cds, and some stores (like SuperWarehouse, http://www.superwarehouse.com/MSI_FX5900XT_128MB_Video_Card/FX5900XT-VTD128/pi/362395) also imply that the games come with the card (Btw, no connection with superwarehouse, could be a total scam, just happened to pop up in a search)
I guess I don't really need the games... But if MSI implies that the games come with the card (http://www.msicomputer.com/product/p_spec.asp?model=FX5900XT-VTD128&class=vga) then I expect to see them.
But yes, the model number on the web site is MS-8937-040, while my box says -070. Perhaps -070 means "no games"?
Thanks to you all for suggestions and help.
Michael

FX5900XT-VTD128 drivers

Hello everyone,
What are the best drivers for this card; FX5900XT-VTD128? I'm currently running 61.21 and live update gives 77.77 but nvidia gives 81.98 so I'm not sure which is better.
MOBO: MSI 865 p/g neo2
CPU: 2.8e GHZ prescott
PSU: Antec true power 550 W
+12V-30 Amp
+3.3V-32 Amp
+5V-40 Amp
+5VSB-2 Amp
-5V-0.5 Amp
-12-1A Amp
Video card: MSI FX 5900XT 128MB AGP card
512MB 333 MHZ 2700 Centon ram memory
2- 12V cooling fans
80G Western digital 8 MB cache
Nec DVD burner
Mitsumi 3.5 floppy disk drive
OS:Windows xp
19 " CRT KDS monitor
Canon i960 printer

Here is the link for 77.77 Hope this Helps DOK http://www.nvidia.com/object/winxp_2k_77.77.html

[VIA] MSI KT3 Ultra-ARU and a MSI FX5900XT 128MB DDR Video Card

Does any body out there know if a MSI KT3 Ultra-ARU and a MSI FX5900XT 128MB DDR Video Card will work well together?

like the grayone say, is true. for more ensure, try and search the graphic cards support list for your board at MSI (Sorry cause i don,t no is where the site located)
in my opinion, most is compability for your card, when is a AGP slot.
Except the new one like the AGP slot, call AGR( Accelaration Graphic Riser slot) that really need to find a compatibility graphic cards.....

URGENT HELP: PC can't post after Bios Update on MSI NX6600GT-VTD128

The LiveBIOS utility on my PC showed that there was an updated BIOS of my MSI NX6600GT-VTD128 that I was using and I proceeded to update using the facility.
Everything seem fine until the system was rebooted, now the system refuse to post. All I see when I power on the system is a moment of power (e.g. I can see the lights on my keyboard and card reader), before they also disappear.
My system is a P4 2.4 Northwood running on a MSI 875P. I had already cleared the CMOS on my motherboard but it didn't help. I would appreciate greatly for any advice.

Quote from: Glenn on 24-September-06, 14:26:51
Common mistake.
Unfortunately, the cure is likely to be painful.
Did you disable your Antivirus and Firwall before doing such a thing?
Video cards aren't like motherboards, and just updating for the simple fact that it's available is wrong regarding BIOS's for anything.
You should have a specific reason to do so.
Now, did you backup your old BIOS?
You may need to contact MSI directly to get the original BIOS and use a PCI video card so you can boot and see what you are doing to reflash your AGP card.
How to contact MSI.
Thanks for the advice. And you are right, the cure is painful, particularly, when I didn't back up the old BIOS and neither do I have a PCI graphics card lying around.
I did deactivated my antivirus whilst flashing, and there was no firewall running.

MSI FX5900TX-VTD128 Video IN Question re S-VIDEO

Can the MSI FX5900TX-VTD128 card support S-VIDEO input?
I've read in some reviews of this card that MSI is no longer including the external 4-to-1 video adapter.
I sure hope this card comes with SOME cables for video INPUT. If it doesn't come with the 4-to-1 adapter, anyone know if it would work. I really want this card to take an S-VIDEO input source, not just ugly composite video.
BB.

;(
I've got the same problem using the G4MX440-VT8X128 http://www.msicomputer.com/product/vga/vga_detail.asp?model=G4MX440-VT8X128.
Did you make yours to work ?
Any hint to give me ?
P.S.: I've tried with Windows Movie Maker and Virtual Dub, my WinProducer which came with the box bundled is not working properly, it (only winproducer) crashes during the boot (any hint about this also ?).

FX5900XT-VTD128 capture problem

Hi,
I read the many posts about capture problems but did not recognise my issues.
I just got FX5900XT-VTD128 and I am trying to get it to capture with WinDVD creator (bundled). WinDVD would start but then it would hang without listing any capture device.
I installed the latest WDM drivers from the nVidia site (2.20_wdm-vivo.exe)
Device manager list the following devices under sound, video and game controllers:
- nVidia WDM A/V Crossbar (12-2-2003)
- nVidia WDM Video Capture (universal) (12-2-2003)
The multimedia tab in control panel show the following under "devices"
under "Video Capture device" --> -Microsoft WDM Capture
After reading the posts, I suspected a WDM driver problem so I did the following:
1- removed both nVidia WDM devices from device manager
2- removed Microsoft WDM Capture from multimedia devices
3- removed nVidia WDM drivers with Driver Cleaner
I rebooted and confirmed that no nVidia WDM devices were present in Device manager and that no WDM capture device were present under multimedia capture devices.
I re-installed nVidia WDM driver 2.20 and rebooted. Windows plug and play recognised both nVidia WDM devices and installed drivers for it.
When I checked, both Device manager and Multimedia capture device were back as they were before the driver re-install yet WinDVD still hang when I click "capture" (Window is still alive, I can kill WinDVD manualy but I would then not be able to restart it without first rebooting).
I tried Flycap and VirtualVCR with no better result, they hang.
I am using Win98 SE on a Gygabyte GA-7N400-l motherboard with AMD Sempron 2400+ CPU and 512MB RAM. I have no other card in the PC.
I am using nVidia driver 66.94 from the file: "66.94_win9x_english.exe"
Any insight would be greatly appreciated.

also refer to this post....5900 Video Capture
its name is fx900xt capture and got 5 thumbs on the forum title for easy to find....

May I use MSI FX5900XT with Adobe Premier 1.5 to capture analogic video?

Hi Folks,
Does anyone know if it is possible to use MSI FX5900XT with Adobe Premier 1.5 capturing video ?
I am trying to use this software to capture video and I see that Premier does not recognize it. I can normally capture with Virtual VCR or VirtualDub.
Is there any plug in or driver to permit Premiere recognize the MSI FX5900XT ?
Regards,
Mario Rodrigues

In the Adobe site there is no mention about Nvidia Cards.
I think it is stranger because the capture with Nvidia Cards are becoming very common nowadays.
I would like to know if someone has tried to capture with Adobe Premier using MSI FX5900XT.
Mario

Flickering in MSI 6600gt VTD128

Hi,
I have some problems with 6600gt AGP card i just bought.
1. I notice constant flickering (i don't know how to name it precisely) when playing games (any game). If i move the mouse slowly, i can notice flickering on the top of the screen, looks like the lines are drawing up too slow. Even if the fps is >80 in far cry or 40fps in Half life. It's killing me :(
2. Far cry has too much lightning in the game. I'll upload the screenshots if you need them.
2. There's no fog in Prince of Persia: Sands of Time. If "fog" is enabled in options, i don't see anything on the screen. If i disable it, everything is just fine.
Tested with the both cards i bought (MSI 6600gt VTD128)
Please, help me solve at least the first problem.

refresh overrides helped my eyes greatly. thanks most of the flickering has gone, at least my eye does not notice them. moreover, i can enjoy watching movies in lower resolutions.
but i still have problems with the light effects. could it be a problem with my memory? just tested it with memtest and got 2.4 GB/s in dual pc2700 mode with my celeron-d! that's really frustrating :( i think i need to upgrade my cpu and psu.
by the way, any hint to disable fast writes on Neo2-PLS? couldn't find the option in bios.
thanks again for the reg file.

Compatibility between MSI NX6600GT-VTD128 and motherboard

Hi guys, I want to know if there's compatibility between my motherboard "MSI 875P Neo-FIS2R AGP8X" and the "MSI NX6600GT-VTD128" because I want to buy this Video Card but my doubt is about the compatibility or maybe some errors, and I have a 400W Power Supply.. that's ok for this video card?... thnx !!!

hi, how are you.
wel there are no cmpatibility issue with this motherboard and the video card... or i am not notify about...
but do you have to give "us" (all posiblle reply) more info about your pc, anyway the only limitation about it's the slot used, that motherboard uses agp8x and you have to buy a 6600vtd agp 8x, because thera are one model pci express that's all
the power issue: not a issue realy 400w power source are just enough
th real monster are hte 6800 family that need 470w or something like that to work fine
ok i hope best to you and your newer card, and tellme how works this magnificent piece of technological art(in middle rank) and the capture feature with onchip video processor
byee!!

Compatibility ?? MSI NX6600GT-VTD128 with chaintech motherboard ?

hi
i have bought recently this MSI NX6600GT-VTD128 and install it on chaintech 7VIL4 with 512 ddr athlon 2800+ 400W psu and cant start the pc black screen no boot only fan working.... so my seller told me that maybe it is not compatible wat do you think about this ???
thanks for helping i try everything except install it on other pc
bye

Just because yours has more watts doesn't mean it is more powerful.
Check out this topic https://forum-en.msi.com/index.php?topic=76923.0
Also please post the max amps for your powersupply on the 3.3v 5v and 12v rails. This info can be found on a sticker on the side of the PSU.
Good Luck
Jeremy

Msi fx5900xt vtd128 FRIED!!! :(

Similar Messages

Maybe you are looking for