Msi g4ti4200 td64 8870 bios

is there an up date for the g4ti4200 td64 bios 8870
4.25.00.29.10
i have seen in the bios  v130                                  
tw.msi.com.tw-/autobios/SVga/Bios/Ms8870/  ?(
note v100 gives you the 4.25.00.29.10
v130 gives you 4.25.00.29.24
? this bios is for g4ti4200 64td but is this an update for 4.25.00.29.10
i have updated the bios and it worked ok could not see any problems but to be safe i changed back to the original bios 4.25.00.29.10
can anyone find out if this is an update for that bios or is it a new bios for a newer version of the same card
Thank you
Paul       ?(

I've been asking the same question:
http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=11340&boardid=9&styleid=1
Hopefully we'll have an answer later this week:
http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=11579&boardid=9&styleid=1

Similar Messages

  • A mobo for my msi g4ti4200 td64

    I want to change my mobo with a k7t turbo2-ms6330 ver5.0. Is my msi geforce ti4200-TD64 fully compatible with this mobo ?
    I use 512 megs ram PC133
    thanks !

    yes many users like bigdaddy swear by it

  • [GeForce4 Ti] What is the voltage of G4Ti4200-TD64, is it 3.3V?

    I have upgraded my system and bought an Abit NF8 socket 754 motherboard, I want to retain my old graphics card. I asked the dealer for a motherboard which would support my ageing MSI G4Ti4200-TD64 4x AGP graphics card and was told there would be no incompatability issue with older 4X AGP cards. I have built the system, the fan starts on the VGA card, but there is no picture.
    I notice that the manual says the board does not support 3.3v AGP cards, only 1.5v or 0.8v cards. I have downloaded the manual, but there is no technical specification. Is this card 3.3V?

    4X boards are 1.5V and 8X boards are 0.8V cards. 2X boards are 3.3V. I do remember that some boards come with a switch on them to change from 3.3 to 1.5V.  There are those who know far more than I who may be able to answer.

  • Anyone know the fan specs on a MS-8870 (MSI G4Ti4200-TD)

        Does anyone know the CFM and dba of the fan attached to a MS-8870 (MSI G4Ti4200-TD)?  Thanks
    Steve

    Quote from: accesstech on 07-July-11, 17:50:28
    so 75c normal o/t is o.k with a view to it raisiing when under load?
    75C is a very normal temp

  • Different 8870 BIOS versions?

    Does anyone know the difference between the various 8870 BIOS versions listed through http://tw.msi.com.tw/autobios/VerChk/ListBios.asp ?
    I'm assuming they're for the different types of 8870 (i.e. 64MB vs. 128MB and with or without VIVO).  However, all are classified as a 8870.
    I'm running the 8870 64MB VIVO - Live Update shows it as a 8870-TD64 (though I suspect it should be 8870-VTD64) and that my BIOS is current.
    Anyone?

    How about this:
    Does anyone else who has a MSI 8870, G4Ti4200-VTD64 have a BIOS version other than 4.25.00.29.10?
    (For those who haven't checked, the following BIOS versions are listed on the BIOS List site:
    Model MS-8870 G4Ti4200-TD64
    Online Ver. 4.25.00.29.10
    Model MS-8870 G4Ti4200-VTD
    Online Ver. 4.25.00.29.00
    Model MS-8870 G4Ti4200-TD64
    Online Ver. 4.25.00.30.00
    Model MS-8870 G4Ti4200-TD64
    Online Ver. 4.25.00.29.24
    Live Update reports the current online version as 4.25.00.29.10)
    Thanks...

  • Need specification of capacitor C105 on G4Ti4200-TD64 please

    Is anyone here able to tell me the specifications of capacitor C105 on a 64 MB GF4 Ti4200 (AGP 4x, not one of the newer 8x models)?
    I broke it while removing the original cooler/fan from the card and it should be no problem for a friend of mine to solder a new one onto the card but we need to know the specifications please.
    The sticker on the backside of the card says "G4Ti4200-TD64", on the front is printed "8870 VER:10A".
    Here is a picture where the missing capacitor was located (the rests of the broken capacitor have already been removed in this photo).
    I'd be glad if someone could help us with this information.

    Quote
    Hi Glenn,
    The C105 on G4Ti4200-TD64 uses
    CAP, MLCC, 4.7u/6.3V/X5R, 0805, ±10%.
    Vendor
    YAGEO
    VENDOR PART_NO
    CC0805KKX5R5BB475
    Hope this can help!

  • BUG with Memory CAS-Latency with MSI i848P Neo-LS BIOS

    I have a bug with MSI i848P Neo-LS BIOS. I try many MSI i848P with same trouble : the CAS Latency is always set to 2.0 even if the memory is CAS Latency 2.5.
    It doesn't depend on PSU or others things (graphics card,...).
    Try with Pentium 4C 2.6 or 2.8
    But I have just one brand of memory (but many different sticks). Chips reference are VT56DD32M8PC-5 (256 or 512 Mb). This memory are reference as Cas Latency 2.5
    If I set memory timings on SPD or manual : same result !!!
    If I set memory speed on AUTO or 400 MHz : same result  !!!
    If I set other timings, then they are save correctly (ie : RAS# precharge set to 3 or 4).
    I check timings with latest version of Memtest86+ V1.0 : http://www.memtest.org/
    and of course, I get many errors.
    The same memory tested on others mobo, give good results.
    I try Windows XP installation and I get....  blue screens.
    With some memory sticks : I have this message "memory timing too tighly",
    if I press F1 to continue: then I get a memory cas latency of 2.5 with memtest86+ and then no error.
    I try BIOS revision 1.0 (default) and 1.2: same result !!!
    So, as I said before, I think this is a bug with the BIOS. I agree that a BIOS cannot detect correctly all kind of memory, but if you set memory timings manualy, then it must be set as you want ! ?
    Any idea...
    Thanks

    H0 Alex,
    You are correct.I have the same problem with my 875p neo lsr on bios 1.9. TH0S 0S B0OS BUG.but everyone says your psu is not enough or your rams isnt  on the MSI Memory Compatability List.
    why all of rams I try give same result?
    MS0 boards works only with 10 or 20 ram.you don't say customer why you use this rams?
    why in asus boards many os these rams working properly.This rams isnt on the MSI Memory Compatability List.but working.I try many no name rams and results are very good in all of the tests.
    In my opinion MS0 bioses doesnt work good enough.
    You don't drive a car.Car Drives you.

  • Request For MSI GS70 2PC 419XFR Bios Unlock

    Hi Svet!
    Request For MSI GS70 2PC 419XFR Bios Unlock (i5&860M)
    Bios: E1772IMS.109
    Bios link: www . download . msi . com / bos_exe / E1772IMS.109.zip
    VBios: 80.04.F7.00.0E (860M)
    EC Version: 1772EMS Vers5.04
    I don't have PayPal Account - please send me some alternative donation method. (Bank Account or else..)
    Best regards, 1nS4n3.

    Quote from: alonso_91 on 26-February-14, 23:58:37
    Thank you.
    Do you need me to upload the bios file? because I believe that the msi website has the 70R archive which made my laptop useless.
    you mean you don't want latest version [70S or 70R],
    but 70J exactly?
    Quote from: alonso_91 on 26-February-14, 23:58:37
    the msi website has the 70R archive which made my laptop useless.
    how exactly? what hapends after flashing to 70R official?

  • TV-chip on the MSI G4TI4200-TD card?

    Hi,
    I´m thinking of buying a MSI G4TI4200-TD card, but first i want to know what kind of TV-out chip it uses (like cx25871 from Conexant, or SAA7104 from Philips)?
    Is it the same card for the whole ti4200-series?
    If you know please post it, or if you dont know but you have the card please check which chip it uses!
    And if you have an oppinion of how the tv-out quality is with that specific card - please let me know!
    Thanx

    I forgot to mention some details! the card should be...
    MSI G4 Ti4200-TD - AGP 4x - 128 MB DDR SDRAM
    ... and I allso would like to know if the card has both s-vhs, and composite output to the TV!
    Sorry for my bad english - im swedish!

  • MSI G4Ti4200-TP64 Driver

    I just purchased the MSI G4Ti4200-TP64, Model # MS-8886 from Fry's Electronics.  I am having problems loading the driver on my computer.  I have a SOYO SY-7VCA-E motherboard with VIA chipset VT82C694X, Pentium III 933 Mhz processor, and 512 Mb RAM.  I do know that some cards have compatibility issues with the VIA chipset.  NO matter what I do the driver will not fully load and I get a data invalid  and the computer defaults to the Windows VGA generic driver.  My previous video card was Leadtek Winfast Geforce2 Pro.  

    seen other people here similar,appears leadatech drivers are very hard to remove
    try a reg cleaner remove all traces of leadtek

  • MSI GT60-onc modded bios

    @Svet
    Can you unlock cpu multiplier, memory tweaks,cpu throttling,PPU Dsable etc with this latest bios from msi?
    http://msi.com/service/download/bios-18654.html
    Thanks ALOT

    Quote
    can i fiddle the timings if i put the speed at 1866mhz?
    i think you can customize them with regardless of the freq.
    Quote
    if the ram cant handle the speed, no hang up or crash on boot up? or not black screen or something?
    all scenarios can be expected, from instability to unable to boot.
    Quote
    HOw to reset bios settings if something might happen? tnx
    by removing/disconnecting CMOS battery for some time.
    refer to dissasemle guide https://forum-en.msi.com/faq/article/gt60

  • Why MSI DKA 790GX platinum BIOS 1.7 dun have EEP mode for DRAM setting

    hihi,
    may i know why MSI DKA 790GX platinum BIOS 1.7 dun have EEP mode for DRAM setting?
    cos i cant see EEP using CPUZ.

    Quote from: Fredrik on 22-May-09, 09:15:00
    I have no good answer, just a rule of thumb: After a BIOS updae, pull power cable out and clear CMOS.
    In this thread it says Kingston may not have EPP settings, but if it worked previously... Perhaps the memory controller didn't understand you had that memory to begin with? 
    Better ask: Is everything the same, before and after update? Why did you update?
    Quote:
    1.7 Update Date 2009-03-31
    Description - Update CPU module.
    - Update memory module.
    - Fixed SmartFan function cannot work properly after resume from S3.
    i update to v1.7 because when i first plug in the 1066Mhz RAM, it only show 800Mhz in bios, so i update to v1.7 as the update include "update memory module".
    anyway my system is fine, as i have run 8 hr of memtest.
    just want to know why there's no EPP option in v1.7
    p/s. I think i saw EPP option in v1.6 using the same RAM.

  • Overclocking an MSI 875P Neo-LSR Bios 2.2

    Here is my configuration :
    CPU : Intel Pentium IV 3.2C 800Mhz HT
    RAM : 1Gb [2x256MB DDR-400 PC3200 Infineon] + [2x256MB DDR-400 PC3200 Kingston]
    GC : Club 3D Radeon 9700
    MB : MSI 875P Neo-LSR Bios 2.2
    HDD : 120 Gb Maxtor 8Mb cache + 40 Gb Western Digital 2 Mb cache
    CPU Fan : Zalman CNPS-7000AlCu
    Yesterday i tried to use CoreCenter and went to 215MHz (3.6 Ghz i think) with no hitch.
    Now my question is with this configuration what can i reach and what to use (CoreCenter or Bios) ?
    And which OC for the memory ??
    Tx

    I think use bios is better because of more flexibility. You can go up to about 3.5GHz.
    please read:
    Overclocking Guide

  • MSI B85-G43 Gaming Bios

    HI, I don't see any file related to MSI B85-G43 Gaming Bios, I would like to update ME....

    E7816IMS.C33 is the latest Beta
    >>Use the MSI HQ Forum USB flasher<<
    Mode 1 pointed at the archive
    Or extract the files to a dos bootable usb and run the bat file manually.

  • MSI GX620 MS1651 WRONG BIOS

    i have a msi gx 620 laptop!
    A wrong bios + EC was written on it, unfortunately: (
    After turning on the MSI freezes legend!
    Bios comes without any errors!
    Where is the bios chip on this motherboard?
    rewriting the bios but can not find the chip!
    Does anyone know where is it?
    thank you! well in advance

    have you checked here? https://forum-en.msi.com/index.php?board=53.0

Maybe you are looking for

  • My 2006 Mac Pro (2.66 Dual-Core) graphics card has died on me...

    After the loading screen, I usually get some form of this (Screen flickering and repeating itself) so I assume this is due to my graphics card not working properly? I have a GeForce 7300 GT in my Mac Pro now and I'm wondering what to do now? Since I

  • Is there a page size limit when exporting a pdf from InDesign?

    My indd file is 201x40 inches with a 1.5 inch slug. When I export to pdf I get this message, "The document page size exceeds the page size range supported in PDF files. Exported pages will be resized to fit within PDF limits."

  • Best way to pull spark view nav out of mobilecomponents.swc?

    I would like to use the new view navigator code introduced in Flex 4.5, however it is important that our mobile apps share the same code base (mostly) as our web and desktop apps. Since these components were only included in the mobile build, what wo

  • Keywords for searching archives

    I'm trying to search the extensions forum for anything that will help me with postage and handling using Web Assist e commerce suite. I must be using the wrong keywords because I'm not finding anything. Any suggestions? TIA Sophia

  • Manditory update error 16820

    When I downloand the free trial there is a manditory update required before intall will continue.  when I attempt to allow the update it says error 16820 and closes. Cannot complete intall. I have downloaded with Firefox, uninstalled and downloaded a