MSI GAMING 9 AC WI-FI MODULE NOT WORKING
Hi,
I have recently built my new system with the MSI gaming 9 ac motherboard and have now noticed as I have had to switch to a wireless connection that the wireless module isn't working. I have tried seeing if the module is installed right and it seems that it is as the screw hole aligns and feels secure. The driver CD for the wireless did not work so I had to install the drivers off the MSI website but still anything I have tried has come to no avail. Please help me!
technical specifications:
intel core i7 4770k
MSI gaming 9 ac
windows 8.1 64-bit
I assume you're talking about X99 Gaming 9, just make sure your mobo is AC(Intel LAN) or ACK(Killer LAN).
The link is for AC one, check if you're using this version 17.01.0000.1697:
http://www.msi.com/support/mb/X99S-GAMING-9-AC.html#down-driver&Win8.1 64
And check if Device Manager has any yellow exclamation mark, or try re-plug the AC adapter.
Similar Messages
-
MSI GAMING 5 - ALL USB ports not working
hello
how are you every one
i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
Mouse and keyborad work in bios but if the system run don't work ! and trun off
and all usb devices
in safe mod work
rellay i don't know where is the problem !
CPU : Intel Core i5-4690K
M.B : MSI Z97 GAMING 5
RAM : G.Skill Ripjaws X 8GB DDR3 Kit
GPU : Gigabyte GeForce GTX 970 G1 GAMING
SSD:Corsair force LX 256 GB
HARD: Seagate Barracuda 1 T.B 7200 RPM
CPU COOLER : Cooler Master Hyper 212 Evo
PSU : Cooler Master GM-Series 750 watt
CASE : NZXT Phantom 410
Thank youQuote from: Nichrome on 28-January-15, 00:18:47
Hi,
What about if you try to install drivers from your product's page?
http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
thank you
i just remove USB3 controller driver and work
thank you all :D -
Function Module not working for old Role
Dears
Function Module not working for old Role
Function Module: /VIRSA/BAPI_AE_USERS_FOR_ROLES
Before EHP4 upgrade this functional module working fine, but after updated users are not visible.
We have chekced if the users are assigned directly users are visible but indirect (Position Based) assignment users are not apprearing.
Pl check the fucntion module with given roles below and identify the root cause,
EP_TRVL_ALL_CAB - Old Role
EP_TRN_TRVL_DRGC_V2 - New Role
Regards
Krishna Mohan CH
9704500717Krishna,
I do not think this BAPI is meant to be called by anyone but the application using it, and its functionality may therefore change without notice.
What are you trying to achieve? Maybe there's a better way to do that...
Frank. -
MOVED: MSI K8N SLi Platinum Duall Channel not work? Please help
This topic has been moved to AMD64 nVidia Based board.
MSI K8N SLi Platinum Duall Channel not work? Please helpQuote from: iggsy on 29-July-05, 06:03:49
Ok I unerstand but i have 201mhz whay 201 instend 200 ?!
Mine does the same thing at the startup screen but not on cpuz...go figure. Just my 2 cents. -
Merge Module not work at target machine
Post Author: soky
CA Forum: Other
Hi all,
I cannot deploy my RDC delphi application. This is very simple app, for trying base of using of rdc. Only one TApplication and a TCrystalActiveXReportViewer component on a form. Run nicely on developing machine. But the deploy drive me crazy
Product: Crystal Reports Developer
Version: 11.0.0.1282
Patches Applied: 0
Operating System(s):
Developer: Windows XP home english
Target: Windows 2000 5.00.2195 SP4 hungarian (version of msi.dll=2.0.2600.1183)
I using InstallShield Express Borland Limited Edition. The build of release successfully with zero error, including merge modul CR11_rdc_runtime. But install broken the following error message:
Internal Error 25001. 1615:
RegistrationCosting::CostAllISSelfRegEntries::MsiDatabaseOpenView(hDatabase,_T("Select * from ISSelfReg"),hVieew)
How can I make usable install stuff with this tools?
Thanks, sokyCan somebody tell me where I can find the log that will tell me whats going on with this module at startup.
You say the module gets loaded, as does lsmod. So there will be no error message, as the system thinks the module is working(which it probably is). The reason your wireless is not working may be another issue. In order for some things to work correctly certain things need be loaded before other things can access them.
anyway, all error logs are in /var/log, shouldn't take you long to look through them. They are dated. -
Memory modules not working on HP Touchsmart 600-1050sc desktop - update BIOS ?
Hi
I just bought 2 x 4GB DDR3 PC3 12800 memory modules from Cruical (see http://eu.crucial.com/eur/en/touchsmart-600-1050sc/CT5311446)
The modules does not work on my HP Touchsmart 600-1050 sc desktop. Acc to HP specs it should support 2 x 4GB (max 8 GB in total).
But the computer does not start (I have installed the modules correct). The manufacturer advises me to update my BIOS.
I wanna ask you guys, before I try suhc a thing, is there any chance this could help?
ThanksHi,
Its specs:
Memory upgrade information
Dual channel memory architecture
Two DDR3 SO-DIMMs (200-pin) sockets
SO-DIMM type-PC3-10600 (DDR3-1333)
Non-ECC memory only, unbuffered
Supports 2 GB DDR3 SO-DIMMs
Maximum memory only if using 2GB DDR3 DIMM modules.
Supports up to 8 GB on 64-bit PCs
Supports up to 4 GB* on 32-bit PCs
Please try PC-10600 RAM
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Adapter Module not working in Sender Communication Channel working in recie
Hi
I have written one adapter module. IF i give that Adapter Module in Sender Communication channel its not working. If i give that in Reciever Communication Channel its working. If i mention in both the channels then its working in sender communication channel also.But in only sender communication channel its not working in only reciever communication channel its working Can any one tell me why its happening
Thanks & Regards
Ravi Shankar B
Message was edited by:
RaviShankar B
Message was edited by:
RaviShankar B
Message was edited by:
RaviShankar Bhi
if its problem with my code why its working if i give the adapter module in both the communication channels?If i give in only sender communication channel the module is not invoking. its not showing any auditlogs.Can any one please help me
OUTBOUND is for sender
INBOUND is for reciever right.?
the following code i have written
public ModuleData process(
ModuleContext moduleContext,
ModuleData inputModuleData)
throws ModuleException {
String SIGNATURE =
"process(ModuleContext moduleContext, ModuleData inputModuleData)";
Object obj = null;
Message msg = null;
String filename = null;
AuditMessageKey amk = null;
try {
obj = inputModuleData.getPrincipalData();
msg = (Message) obj;
System.out.println("&&&&&&&&&&&&&&&&&" + msg);
if (msg.getMessageDirection().equals(MessageDirection.OUTBOUND)){
amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.OUTBOUND);
Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> etHostName: Module called"+ i++);
}else{
File filename1 = new File("
10.7.1.43
XI
source","text.txt");
filename1.createNewFile();
amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> etHostName: Module called"+ i++);
System.out.println("**************" + amk + "***********");
} catch (Exception e) {
Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> GetHostName: Error Module called");
e.printStackTrace(System.err);
ModuleException me = new ModuleException(e);
throw me;
// Read the channel ID, channel and the module configuration
try {
Hashtable mp = (Hashtable)inputModuleData.getSupplementalData("module.parameters");
if(mp != null){
filename = (String)mp.get("FileName");
Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,"Host >>> Element Name is set to {0}"+filename );
}else{
Audit.addAuditLogEntry(amk,AuditLogStatus.WARNING,"HostElementName parameter is not set. Default used: HostName.");
filename = "FileName";
} catch (Exception e) {
e.printStackTrace(System.err);
Audit.addAuditLogEntry(amk,AuditLogStatus.ERROR,"Cannot read the module context and configuration data");
ModuleException me = new ModuleException(e);
throw me;
try {
XMLPayload xmlpayload = msg.getDocument();
DocumentBuilderFactory factory;
factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
Document document =
builder.parse((InputStream) xmlpayload.getInputStream());
Element rootNode = document.getDocumentElement();
if (rootNode != null) {
Element childElement = document.createElement("filename");
childElement.appendChild(document.createTextNode(filename));
rootNode.appendChild(childElement);
// Transforming the DOM object to Stream object.
TransformerFactory tfactory = TransformerFactory.newInstance();
Transformer transformer = tfactory.newTransformer();
Source src = new DOMSource(document);
ByteArrayOutputStream myBytes = new ByteArrayOutputStream();
Result dest = new StreamResult(myBytes);
transformer.transform(src, dest);
byte[] docContent = myBytes.toByteArray();
if (docContent != null) {
xmlpayload.setContent(docContent);
inputModuleData.setPrincipalData(msg);
} catch (Exception e) {
e.printStackTrace(System.err);
Audit.addAuditLogEntry(amk,AuditLogStatus.ERROR,"Cannot read the module context and configuration data");
ModuleException me = new ModuleException(e);
throw me;
return inputModuleData;
Best Regards
Ravi Shankar B
Message was edited by:
RaviShankar B
Message was edited by:
RaviShankar B -
Sender Adapter Module Not Working
Hi,
I have changed an existing Sender Adapter Module code and deployed using SDM.
It was working fine but after some days it is not working as designed. Say for an example, the number of pipes(|) in each record is one less than usual number of pipes. It does not say any error in module but in my java mapping raising GENERIC Exception.
I had the same problem in Dev and now I am facing the same in QA.
When I checked the standalone code it is working fine. Any reason for this anomalous behavior?
Regards,
Manikandan RHi,
Could you give us more details about : your coding, input sample when error is raised ?
That'd help a lot
Chris -
Bridge CC Output Module not working for me
I have installed the Output Module in Bridge CC (Which I can't believ was not included and that it is not an auto update as I thought was one of the big positives of this whole CC concept) but while it opens and looks ok, when I try to create and save a pdf contact scheet, I get a message saying "The file or folder does not exist." and nothing is created or saved. What gives? This is a major feature of Bridge to me as I use it a lot.
By the way, the web gallery does not work at all, either.Have you read through the help doc http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html
-
Hello
I have just loaded LR on Windows 8 and not able to get the Develops Module to work, the adjustmenst such as exposure slider does nothing. the screen goes blank and can see the thumb nail takes adjustment.
Are you able to help.
Thanks HarryHello
I have just loaded LR on Windows 8 and not able to get the Develops Module to work, the adjustmenst such as exposure slider does nothing. the screen goes blank and can see the thumb nail takes adjustment.
Are you able to help.
Thanks Harry -
Develop module not working since upgrade to 4.2
I've installed the 4.2 upgrade and now the develop module doesn't work anymore. It was working fine on 4.1, 64bit version.
I'm on Windows 7 Pro, with second generation i7 CPU, 16 gig Ram
Please have look at this thread at Photoshop.com were I reported this problem with a lot of details already. So far no help provided.....and that's 4 days ago.
I really need help with this as I cannot work my Photos until this is fixed...or at least a solution to remove system files that are not removed when un-installing, as they bring the problem to a previous version that was working just fine before upgrade to 4.2 ( un-installed 4.2 then re-install 4.1, then 4.1 now has the same problem I have with 4.2) What a mess.......Thank you both, as this was the lead I needed to follow.....
The profile is the problem...yes,.... and no....
I use X-rite Color Munki as my profiler, latest upgrade, 1.0.2.0
Using the above info, I've switched from my profile to sRGB, to manufacturer profile and others in the list...result : mine has the problem and not any of the others.
I've just spent 7 hours straight, un-installing, re-installing, LR 4.2, 4.1, Color Munki, deleting the content of the LR Preference file, re-profiling using "easy" and "advanced", trying all kinds of combinations and sequences of the above....
My findings:
1- In LR 4.1 Using my profile, and deleting the content of the " Preference" file before starting LR, everything works just fine. Then when you shut it down and re-open it, the problem is back. Using " Task manager", I force the shut down of the " Not responding" LR, go back to deleting the "preference file" content, and LR works again. This does not work with LR 4.2
2- In LR 4.1 On the last re-calibration I've done, I tried again and it did not work. Went to change profile to my default manufacturer's one and as expected LR worked....but I noticed that the calibration profile change did not affect the monitor screen, and LR 4.1 works perfectly on multiple starts and closes.
Here is the interesting part....: My Color Munki profile is still displayed on the monitor, ( I did not "Restart" or "Re-boot" ) and the selected profile is the manufacturer's in Control Panel's Color Management, and LR 4.1 works perfectly.Can it be that the profile itself, displayed on the monitor, is not really the problem?
Is it possible the "Conflict" would be in "Windows Color Management"? or LR's color management protocols?.....
I have not tried # 2 with LR 4.2 as I'm kind of chicken of going another round of hours at it.... Like the saying goes..." If it ain't brokin', don't fix it ".....
So, for now, I'll cary on with 4.1 as I can at least continue working......hopefully, using the "Sleep mode", and not "Shut down", the set-up will maybe stay "as is", and if not, I now know how to fool it..... -
Wifi module not working in ZTE Open
Hi all.
Bought this device ZTE Open! When I updated the firmware to v1.1 wi-fi module stopped working!
Current firmware: OPEN_US_DEV_FFOS_V1.1.0B01
=More information=
OS version: 1.1.0.0
Firmware revision: 01.01.00.019.215
Hardware revision revision: P752D04B02
Platform version: 18.1
=Git commit info=
2013-12-04'''UPD: '''
Wi-fi access point see, connected.
But no packets, internet does not work. -
"Writer" Module not working in web service mode
Hi,
I designed a experiment to do a prediction work and automatically write the result to AzureSqlServer.
I published a web service from the experiment to trigger the prediction procedure, it worked very well until February. But from then on, the database had never received any data from the module triggered by web service though the web service always
run successfully.However, when I directly run the experiment, the writer works again.
I noticed the experiment dashboard has a new function that can switch between experiment view and web service view. In web service view, all the modules that the “web service output” module not depend on turn grey, including the "writer".
Is that the reason?When you called the web service from the test dialogue, did it work? If you get any error, please paste it here.
Also, please take a look at the example in
this doc which also uses a writer. Note that if you have a writer writing the results to a destination, you typically don't need a web service output. See the below images, 1 with Web service output, another with a Writer. The writer needs to
be configured. -
Rewrite module not working in iis 8
Hi All,
I have a SharePoint site hosted in ports 1122 and I have configured alternate access mapping to "http://batman".
Now, I want if some body types "http://batman" then it should get redirected to some other site. For this I am using URL Rewrite module. My rule is
<rule name="Redirect Batman" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTP_HOST}" negate="true" pattern="^http://batman$" />
</conditions>
<action type="Redirect" url="http://sedwdevrtm:11731/{R:1}" redirectType="Permanent" />
</rule>
which is not working at all. Please suggest something.Hello Alok,
Can you check if it is related to the rule? You can do this by creating a simple redirect rule without a condition and see if that's working.
Otherwise I would also try posting your question in the IIS forums, like suggested in this thread:
http://social.technet.microsoft.com/Forums/office/en-US/bbbe4bae-0f72-4c28-8aa8-27e5585e3062/sharepoint-ignoring-iis-8-rewrite-rule
- Dennis | Netherlands | Blog |
Twitter -
Function Module not working through VC
Hi Experts
I am facing one strange issue while working on VC model with function module as data service.
This FM is to writes data to bcak end BI master data table which is working fine through BI. When i pass the values through VC, New values are not reflecting in BI table. I tried passing values through form / table but still its not working. Also we have system generated message which show success / failure of FM & the changed values as output after execution of FM. Which i am getting success message every time i pass values.
Currently i am working on VC 7.01 & SP6 with Flash compiler.
Please guide me if you have face this issue.
Thanks
SandeepHi Sandeep,
Try to put a breakpoint in your FM and check whether you are sending correct values and the values saving or not.
Thanks,
Pradeep
Maybe you are looking for
-
HT201335 Apple TV AirPlay mirroring
Why couldn't we use mirroring on the new iPod as it is the main gaming device for apple and it would be great to go round to mates houses and show them the game u just bought on the tv
-
Unknown error (-50) rental movie stopped playing
I downloaded a rental film off iTunes and initially it played fine. Although after around 10 minutes it stopped playing and then would not play at all. A message showed that said 'unknown error (-50) please check you are still connected to the networ
-
Oracle 10g connectivity with sql server 2000 through oracle transpa gateway
dear gurus. i am to connecto oracle 10g with sql server 2000 through oracle transparent gateway. i have installed transparent gateway and proper configured. also link is created. but when i execute query "select * from city@inventory" , so an error d
-
IPhone 4S Connectivity In Europe
I need to know if I can use My Verizon IPhone 4s in Europe with Local Sim Card
-
Unable to copy videos to iPhone
Background: Computer OS: Windows 7 iTunes version: 12.0.1.26 iPhone: 5s iPhone OS: 8.1 For years, I've enjoyed using my iPhone to play videos copied from my computer. My process has been as follows: 1) Copy videos from DVDs I own to my computer. 2)