MSI Gaming N770 TF 2GD5/OC display artifact issues.

Hello gurus of all things msi! My latest question has to do with my shiney new gtx 770 which is performing flawlessly up until it hits ~55 c then memory artifacts start displaying like I have the frequency set too high.
This is running it with no tweaks or using the msi gaming app to overclock it so I fired up afterburner and kombustor to see what was up.
After letting kombustor run a bit the temps started to rise but so did the tpd which instantly hit 97% on kombustor launch then pegged at 100% right as it was nearing the 55~60 c range then the artifacts started to appear.
So is this bad memory/gpu/etc or is my psu insufficient to drive the card? I'm leaning towards insufficient power as it has plenty of amps on the 12v rail(50amps) but maxes out at 630 watts and the minimum rated supply needs 600 watts.
A related question is I had to manually set the fan to increase in speed as the temps rose as the built in fan speed control wasn't actually increasing the fan speed as the gpu heated up so might this also be an issue?
I can supply screen shots and logs if needed.

Welp turns out it was leftover driver bits from back when I first built the system and used the intel integrated just to see how it worked.(which btw is actually quite well as long as you are not into serious gaming)
Was pulling my hair out in frustration as I had plenty of power after adding up all the wattages figures for my devices and the fact as long as I underclocked the card it ran without issues.
Then I decided to try a complete driver wipe and googled up ddu and ran it and noticed the intel driver still loaded up somehow so deleted them along with everything else and ran a fresh install of the latest nvidia drivers and now all is well.
So if any of you users are having odd problems you don't think you should be having keep at it till you figure it out. 

Similar Messages

  • MOVED: GOP/UEFI bios request for MSI Gaming N770 TF 2GD5/OC

    This topic has been moved to GAMING Graphics Cards.
    https://forum-en.msi.com/index.php?topic=182093.0

    Thank you, I believe it worked, however now I have another issue.
    Now that I got the card flashed and good to go, now when i set windows 8 mode, my computer boots to the EFI Shell, I check bios and i have no idea how to disable or stop it from happening.. Any ideas?

  • GOP/UEFI bios request for MSI Gaming N770 TF 2GD5/OC

    Hi,
    SN : 602-V282-41SB1404031408
    Identifying EEPROM...
    EEPROM ID (7F,9D22) : PMC Pm25LD020 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    IFR Data Size         : 1140 bytes
    IFR CRC32             : A22FD849
    IFR Image Size        : 1536 bytes
    IFR Image CRC32       : A904852C
    IFR Subsystem ID      : 1462-2825
    Image Size            : 99328 bytes
    Version               : 80.04.E6.00.1E
    ~CRC32                : 26CB27FA
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK104 Board - 20050000
    Product Revision      : Chip Rev   
    Device Name(s)        : GeForce GTX 770
    Board ID              : E12D
    PCI ID                : 10DE-1184
    Subsystem ID          : 1462-2825
    Hierarchy ID          : Normal Board
    Chip SKU              : 425-0
    Project               : 2005-0000
    CDP                   : N/A
    Build Date            : 11/06/13
    Modification Date     : 12/20/13
    UEFI Support          : No
    UEFI Version          : N/A
    UEFI Signer(s)        : Unsigned
    Sign-On Message       : GK104 P2005 SKU 0000 VGA BIOS
    MSINV282MS.3A0

    You can use this:
    https://forum-en.msi.com/index.php?topic=180977.msg1300994#msg1300994

  • MSI Gaming N770 TF 2GD5/OC EFI/GOP

    Need bios for secure boot please.  S/N: 602-V282-220B1312111253

    Quote from: mykalmunlight on 13-September-14, 07:54:27
    hMSI.GTX770.2048.130611_1.rom current BIOS or 80.04.C3.00.1F
    That is all useless and nothing of that indicates a real bios version. Anyway the S/N allows to determine a the current UEFI vbios required. Use the attached.
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

  • Windows 7 Won't Boot After Nvidia Driver Installed, MSI Gaming N770

    Hi I just bought the MSI Gaming N770 2gb and after installing the nvidia drivers, Windows 7 will not boot after my motherboard POSTs. 
    I bought this to replace an AMD card.  I uninstalled all the AMD drivers before putting in the MSI card.  I've also run the Display Driver Uninstaller in Safe Mode and everything.
    After a few hours of research, I finally came across a thread about flashing a vbios, and something about these cards not working with motherboards with UEFI bios. 
    I'm using a P8Z77-I Deluxe mini-itx board, with a Rosewill 630W psu. 
    I have both 6+2 PCI pins plugged into the two 8pin power ports on the GPU.
    Is this an issue that can be fixed with turning off secure boot? or by flashing a vbios onto the card? Or is the card a dud? Or do I have to re-install Windows. 
    If the vbios is required, are there instructions on how to flash it? I have no idea how to flash a BIOS.  Thank you!!

    Had to update BIOS. All fixed!!!! 

  • MOVED: MSI GAMING N750Ti TF 2GD5/OC G-SYNC Support GeForce GTX 750 Ti 2GB 128-Bit GDDR5

    This topic has been moved to GAMING Graphics Cards.
    https://forum-en.msi.com/index.php?topic=184003.0

    Hi I was reading this thread https://forum-en.msi.com/index.php?topic=184043.0 and the problems with compatibility this guy is having are the same problems I am worried I will have as I had them previously with my Asus nvidia gtx 750 Ti which I have sent back. My motherboard is the same as his and apparently doesn't have UEFI capabilities as dell didn't start using UEFI motherboards until 2012 which was after I got my pc. Without UEFI on my motherboard would this card even work? Also my bios is only version 7.12 does that matter or can you provide a bios to fix that and make the card work? Sorry if I'm being a pain or asking the same things again in just a bit concerned ill buy the card and it won't work. Also someone on another thread said that if you have tried a different gtx750TI and it didn't work they doubt any of the gtx 750 TI's would work is that the case? Sorry again for the silly questions just want to make sure.
    Thanks Steve 

  • MSI Twin Frozr OC Radeon 7870 Display Resolution issues

    Howdy all,
    Just got the above card (Radeon 7870 Twin Frozr OC) and I'm having issues connecting 2 monitors.
    I was originally using a regular DVI cable that went from my 30 inch dell monitor to the new card and since I didn't have a DVI to HDMI cable or any micro cables I wasn't able to hook up my 25 inch Acer monitor (the card has 4 display ports, one regular DVI, a regular HDMI, and 2 micro ports).  I got the cable I needed to hook up the DVI input of the monitor to the hdmi output of the video card.
    The problem is now my 30 inch dell monitor will not display 2560x1600 or anything above 1200x800 while the Acer is hooked up.  I have tried using the new hdmi on both monitors and the Acer is still outputting 1900x1080.  So the cable is fine. 
    I am using a Dell T7400 that has a 1000w rated power supply.
    Any help on this would be greatly appreciated.  Thanks.

    One more bit of information.  When I have the dell monitor connected with the HDMI cable it doesn't even give me the option for resolutions higher than 1200x800.  When I the Acer 25 inch plugged in through the HDMI I can get 1900x1080 on it.  The Dell I then connect directly into the bigger DVI port and it gives me the options of resolutions up to 2560x1600 but when I try them it just gives me weird pink and rainbow lines all over the screen. 
    Thx again

  • GOP Bios for MSI N770 TF 2GD5/OC

    MSI Gaming N770 TF 2GD5/OC
    S/N: 602-V282-220B1312074023
    dropbox.com/s/79uulx9xz61mnfh/GK104.rom
    Thanks a lot!

    Use the attached.
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

  • MSI Gaming App default mode ?

    I am running a R9 280x. When I first run MSI Gaming App I see 800Mhz displayed. I assume it's in a mode that can throttle between it's lowest and highest capped clock. Once I select a mode, I only get a choice between 1000mhz, 1020Mhz, and 1050Mhz. I can't select the original mode, or rather none of the three available modes, to have it to back to being able to throttle down all the way to 800Mhz. The info seems to suggest Gaming Mode is the default and original mode, but I don't think that's the case since it stays at 1050Mhz when you select that mode. How can I select no mode, or can you add a true default mode button ?

    Nvm as it turns out, the way to set it back to normal auto throttle mode is to just completely shut down the MSI Gaming App. I would suggest being able to click on the same mode again to select no mode which would be more intuitive and get people to use the app more and leave it running instead of having to shut it down completely. As soon as I exit the app it drops back down to 500MHz.

  • N770 TF 2GD5/OC Gaming black screen blinking problem

    Hello there,
    i upgraded my PC 4 days ago with a MSI N770 TF 2GD5/OC Gaming graphic card. I installed the newest graphic drivers. Clean install and without nVidia Experience. My problem is black screen blinking when i am playing or watching. Screen turns to black for 1-5 seconds like monitor lost its signal. It happening when i click to fullscreen button. No matter if its in youtube or windows. It happening every time. It does the same when i am playing. Big lag and then black screen blinking for 10 sec. Sometimes more sometimes less than 10 sec. I used Google and i am not the only one, who have this problem. Some people says, that GPU BIOS flash helped but in MSI website is only one BIOS and i dont know if its newer than mine or not. S/N of my card is 602-V282-380B1404100829 (if it helps) and my current bios is here h t t p ://leteckaposta.cz/186979270 (just click on the GK104.rom in the middle).  I think i tried almost everything. Registry clean, anti malware and spyware, drivers re-install, turn W Aero Off, UAC off and other worthless tips how to fix this issue. I monitored my PC with many temperature software and i am 100% sure, that overheating isnt the problem. So could you please check if the MSI Bios is newer than mine or tell me what to do to fix this irritating problem?
    Thank you very much
    PS: I am not a native speaker and english is my 3rd language tbh, so please excuse any grammar mistakes

    you are using latest vbios version, test the card in another PC

  • [REQUEST UEFI GOP vBIOS] MSI N770 TF 2GD5/OC GTX770 G

    Hello, I'd like to request the UEFI GOP vBIOS for my new card.
    MSI N770 TF 2GD5/OC GTX770 G
    serial number: 602-v282-220B1312024482
    NV flash output:
    NVIDIA Firmware Update Utility (Version 5.118)
    Adapter: GK1xx                (10DE,1184,1462,2825) H:--:NRM B:01,PCI,D:00,F:00
    The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
    Identifying EEPROM...
    EEPROM ID (7F,9D22) : PMC Pm25LD020 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    Image Size            : 62976 bytes
    Version               : 80.04.C3.00.21
    ~CRC32                : 28D57999
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK104 Board - 20050000
    Product Revision      : Chip Rev   
    Device Name(s)        : GK1xx
    Board ID              : E12D
    PCI ID                : 10DE-1184
    Subsystem ID          : 1462-2825
    Hierarchy ID          : Normal Board
    Chip SKU              : 425-0
    Project               : 2005-0000
    CDP                   : N/A
    Build Date            : 06/03/13
    Modification Date     : 06/18/13
    Sign-On Message       : GK104 P2005 SKU 0000 VGA BIOS
    MSINV282MS.352
    Thanks!

    Use >>this<<
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

  • [Request] GOP/UEFI Vbios for N770 TF 2GD5/OC GTX 770 Gaming

    [Request] GOP/UEFI Vbios for N770 TF 2GD5/OC GTX 770 Gaming
    Hello,
    May I have the latest bios for my GTX770 so i can use it with windows 8.1 UEFI and get fastboot !
    Here is the model : N770 TF 2GD5/OC GTX 770 Gaming
    Here is the serial number :
    602-V282-41SC1403007760
    Best regards
    By the way I can't register this card (Error: 00140002)
    Looks like a return because no blister !

    Use the attached.
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash
    Quote from: mardigan on 05-June-14, 19:13:00
    By the way I can't register this card (Error: 00140002)
    Looks like a return because no blister !
    If it is a used card that might be the cause but best would be to contact MSI about it: >>How to contact MSI.<<

  • UEFI GOP vBIOS] MSI N770 TF 2GD5/OC

    Hello, I'd like to request the UEFI GOP vBIOS for my new card.
    MSI N770 TF 2GD5/OC GTX770 G
    serial number: 602-v282-23SB1309004538
    NV flash output:
    NVIDIA Firmware Update Utility (Version 5.118)
    Adapter: GK1xx                (10DE,1184,1462,2825) H:--:NRM B:01,PCI,D:00,F:00
    The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
    Identifying EEPROM...
    EEPROM ID (7F,9D22) : PMC Pm25LD020 2.7-3.6V 2048Kx1S, page
    Reading adapter firmware image...
    Image Size            : 62976 bytes
    Version               : 80.04.C3.00.21
    ~CRC32                : 28D57999
    OEM String            : NVIDIA
    Vendor Name           : NVIDIA Corporation
    Product Name          : GK104 Board - 20050000
    Product Revision      : Chip Rev   
    Device Name(s)        : GK1xx
    Board ID              : E12D
    PCI ID                : 10DE-1184
    Subsystem ID          : 1462-2825
    Hierarchy ID          : Normal Board
    Chip SKU              : 425-0
    Project               : 2005-0000
    CDP                   : N/A
    Build Date            : 06/03/13
    Modification Date     : 06/18/13
    Sign-On Message       : GK104 P2005 SKU 0000 VGA BIOS
    MSINV282MS.352
    sdrv.ms/Lx5D5Q
    Thanks

    Use >>this<<
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

  • MSI N770 TF 2GD5/OC not working system cannot find it to install the drivers

    have just built a new gaming rig and used the MSI Z97 gaming 9 and the MSI N770 TF 2GD5/OC i set up the pc turned it on without the graphics installed and installed all the mother board drivers and then updated them all using live update 6.
    then when i added the graphics card and powered it back on the fans spin on it but when i got to install the drivers it says failed to find the hardware so the computer doesn't know its there
    have reset pc and changes slots but nothing seems to work every now and then it will load up and i use it for 5 mins then the screen loses its data and the mouse and keyboard lock up till i go back to using the on board HDMI port
    has any body encountered this if so how do i fix it

    What was updated with Live Update?
    Did you try clearing CMOS? >>Clear CMOS Guide<<
    What is the actual Power supply? As EVGA 750B is not enough info, though I guess it's powerful enough to power gtx770.
    Tried with single RAM stick?
    Also try with motherboard outside of the case.

  • MSI Gaming APP for X99 Gaming 7 Not displaying properly

    I have installed and removed and installed again the MSI Gaming App.  But when I run it each time, I keep getting the same issue.  When I launch the MSI Gaming App, a white box appears in the middle of the screen with a single word "Canvas" written on it.  The only thing you can do with this is close it by pressing OK.  The program itself opens in the bottom right corner of the screen and the box is only partially displayed.  It is like half the app has been cut off.  The only button accessible in the top right is the info button, while the other two next to it have been cur off.  Similarly, the only boxes showing are the top part of OC, Gaming, and the left half of Silent.
    Please advise if this is a known issue or if there is a fix.  Yes, I am using the latest version of the APP - 2.0.0.21 that i downloaded using Live Update 6.  I am running Win 7 Home Premium 64bit with all the latest updates and a 5930K with Twin GTX Titan Blacks with 16gig of ram and the latest nVidia Driver 347.09

    Thanks!!  I downloaded the latest version of the gaming App and it works great.  The problem I am having now is that MSI Live Update appears not to be seeing the latest versions of many apps, utilities and drivers.  I have the latest version of live update installed.  6.0.012
    For example, I have Killer Network Drivers 1.1.42 1045 installed and Live Update says this is the latest version.  But on the web site, it says 1.1.49 1068 is the latest version.
    Any Ideas why Live Update is not finding the latest info for my drivers etc... ??

Maybe you are looking for

  • Enable/Disable Column in a Advanced Bean Table

    Hi, I have 2 columns that needs to be enabled/disabled on a standard oa page PO Lines summary page. I went through couple of blogs/forums and found 2 approaches :- Approach 1 1) Extended the standard VO POLinesMerge. 2) Added a attribute column Deriv

  • Online exercise book app

    Is there an app out there for use on ipad and macbook where pupils can save their completed work to hand in, save handouts etc. I want a version of a pupils normal exercise book but online. I dont want to have my inbox full of assignments that I mark

  • Error on Intel no error on PPC

    I am developing a cocoa core data document program on both a MacBook (intel) and a mac mini (ppc). On the PPC, the project compiles and runs fine, but on the Intel, it compiles fine, but at runtime I get the following error. 2007-05-07 14:54:19.942 m

  • Am having problem with my iphone4s not syncing with my iPad

    Am having problem with my iPhone 4s calendar events showing up on my iPad .  Have turned calendar off & on in both devices, to no avail

  • HR_INFOTYPE_OPERATION

    Hi, i am using the FM HR_INFOTYPE_OPERATION to upload the data into infotypes 0000,0007 and 0008 for change of shift action and in the FM i am using NOCOMMIT = 'X' as i don't want to insert the record in 0000 and 0007 if infotype 0008 fails  or eithe