MSI Ge60 0NC Cpu Heat Problem (80C degree)

Hi!
I was having problems to play even low graphical games. I was thinking the problem was Nvidia Graphic Card.
But I found that it wasn't. When i open CPU thermometer it shows 80 C degree while doing nothing. What can be the problem? Is it based on hardware or software?

Hi!
At start it is 60 C degree. After 5 min. with doing nothing it becomes 80 C degree.
Under load temp is approximately 90 C degree. I test and monitor it with the "Intel BurnTest" and "CPUThermometer".
But even it shows 90 the air which going out is cool. It should have to be so hot but it isn't. I think the problem is thermal compound. Thanks god the warranty is still continuing.

Similar Messages

  • MSI GE60 0NC Problems After Upgrade

    Hi,
    Recently downgraded my MSI GE60 0NC from Windows 8 to Windows 7. Had some issues with the wireless connectivity. I then flashed the laptop to Windows 7 EC controllers. It was then working after this. I then purchased a Samsung 840 Pro SSD 512GB and Corsair Vengeance 16GB. After installing the SSD I then proceeded to do a fresh install of Windows 7. After downloading the wireless drivers I am being told that the drivers may be out dated. I dont understand what the issue is as the did the exact same procedure as before.
    Can anyone help me out please as the laptop is useless at the moment

    Thanks for the reply, check the first thing i wrote, i explained it a bit, also check the screenshot. I think that could be the problem, but im not that good with laptops so im not sure.. "MSI suite" cant find my motherboard so the program wont execute..
    edit: i've already tried the SCM that you linked, i get some errors with net framework so it wont execute after the setup..

  • Unlock BIOS for MSI GE60 0NC

    Hi Svet!
    I want to unlock BIOS of my MSI GE60 0NC . (You have already helped me recently in other threads as well )
    - bios is: w8_E16GAIMS.514
    - firmware is: w8_16GAEMS1.505
    I need the following features:
    - set the CPU voltage for the different states
    - set the GPU (nVidia) voltage for the different states
    - to be able to set the fan level (like you did here : https://forum-en.msi.com/index.php?topic=168727.0 ) for the different states
    The goal is that I can have a quite laptop (thanks to undervolting and modified fan speeds).
    What else can I get? (just send me a PM, if it's better for you)
    Thank You!
    Kris

    Quote from: Svet on 13-June-13, 01:09:31
    unclock BIOS: can be done
    CPU voltage setting: not possible
    GPU voltage setting: bios can't control dedicard vga, also no voltage is possible by bios
    FAN control: not possible by BIOS, but via EC. and would be static[not changeble on the fly
    Hi Svet!
    - gpu thing is not important: I can do it with nvidiainspector (not lower the voltages, of course, but setting a lower power state)
    1. - fan control: what're your recommend settings for this? (the goal is a silent laptop, as far as possible) I thought about that the lowest fan speed would be good around 72 Celsius. What do you think?
    Right now, with the official bios and with Turbo disabled on the CPU via OS, if I see a movie with MPC-HC + MadVR (highest settings, which uses a lot of dGPU) the CPU temp is around 63 Celsius (of course in this case the fan isn't working on the lowest state)
    2. - cpu voltage setting: well, I'm not happy Can you do that I could set the voltages through a program, like ThrottleStop? (Right now it's not working.)
    (I'm using CPUGenie for this purpose on my old MSI GX620 )
    3. - what other settings will be appear in the unlocked bios?
    Thanks!

  • MSI GE60 0NC-622UK and Windows 8.1 secondary HDD sleep bug

    Hi All!
    I'm struggling with this problem for a long time now. (MSI GE60 0NC-622UK, OS: Windows 8.1, BIOS: 5.14)
    There're similar topics on the net:
    http://social.technet.microsoft.com/Forums/en-US/58ae1ed5-c643-41ba-95ec-ffa5fbed16af/win-8-keeps-to-shut-down-my-hdds-why?forum=W8ITProPreRel
    http://www.eightforums.com/drivers-hardware/4710-secondary-hard-drive-goes-sleep.html
    I bought an 256GB SSD in it, so the 750GB HDD is now the secondary one. And the problem is, no matter what I set in Advanced Power Options (never, 0, 600) the OS always puts the hdd into sleep after around 10 seconds (the original windows 8.0 also did the same). The problem is with this the I HAVE to wait couple of seconds when the hdd spins up next time! :(
    Only this one helped: http://lytondarque.com/2013/03/29/prevent-hd-sleep-in-windows-8/
    It's a small utility called KeepAliveHD (I could only install the v1.4.1 version, but it's working fine.)
    So I'm curious is there any other solution beside using an external utility.
    Thanks for helping!

    Quote from: chros on 09-February-14, 19:03:41
    Western Digital 750GB
    HDD: WDC WD7500BPVT-22HXZT3
    serial number: WD-WX41A8216323
    Frimware: 01.01A01
    Taken from this: http://www.storagereview.com/western_digital_scorpio_blue_review_750gb_wd7500bpvt
    Quote
    Power Consumption
    The Western Digital Scorpio Blue 750GB actually does okay in power consumption compared to competitors. Its read/write and startup draw numbers are in line with competitors; its idle numbers and random read are noticeably lower. The observed differences are unlikely to make a noticeable impact on battery life. It is worthwhile to note that during our tests when running as a secondary drive the power management seemed overactive in that it would frequently initiate its sleep mode. When this happened the drive would park its head and spin down after only a few seconds.
    I think the problem is inherent in the design of the drive. The only way around it is by using a program like you have mentioned, unfortunately.

  • MSI GE60 0NC SSD

    Hi,
    Is it possible to remove the normal HDD from a MSI GE60 0NC and replace it with an SSD like a Samsung 830 256GB SSD?

    Yes you can i did the same with my GT60 onc also changed the HDD for a SSD so think that with your comp it should'nt be a problem.

  • Looking for an 802.11AC Wifi adapter for MSI GE60-0NC

    I want to buy an 802.11AC Wifi module for my MSI GE60-0NC to replace the 802.11N adapter it ships with. It must be compatible with windows 8.1 (as the one it shipped with has serious issues unless I disable N and run it as a G adapter). Do not want to use an external USB adapter either. Is there a compatibility list somewhere or does anyone know of an adapter which will suit these requirements?

    For my GE60-2OC i bought an Intel Centrino Dual Band Wireless-AC 7260 + Bluetooth, it works perfectly.
    this card need 2 antenas, (there is 2 antenas in the GE60), and just download the drivers and install Intel drivers.
    http://www.ldlc.com/fiche/PB00159971.html

  • MSI GE60 0NC unlock

    Hello,
    Could you provide me a full unlocked BIOS please ?
    MSI GE60 0NC
    Mainboard:  MS-16GA
    PCB Version:  REV:1.0
    BIOS Version: E16GAIMS.10F
    BIOS Date:  18/12/2012
    EC-FW Version:  16GAEMS1 Ver4.05
    EC-FW Date : 10/17/2013
    Do you accept donations with bitcoins ?

    Ok thanks in advance !
    I will find a way to make a donation because my paypal account doesn't work with my credit card... :/ maybe via a friend's account...
    Edit : Yeah ! I finally did it ! (...with my last paypal funds ^^). Confirmation : 7D4409729W677834W

  • Msi ge60 ond graphic drivers problem

    I installed new windows on msi ge60 ond and first intel vga driver and then nvidia driver and the nvidia driver doesnt work |Windows has stopped this device because it has reported problems. (Code 43)|.
    Have tried removing them all (Driver Fusion) and reinstalling, didn't fix my problem. Can you help me?

    You tried to install what Windows and what Windows came with the notebook?

  • [MSI GE60 0ND] VT-X Problem

    Hi,
    I use Msi GE60 0ND. I need VT-X support for virtualbox. Intel I7 3630QM seems have VT-X support but i can't enable VT-X on bios. There is no option to available it. I checked bios version and it seems up to date.
    I need your helps.
    BTW i use windows 10 technical preview.

    i can use virtual box there is no problem while setup and use it. but i cant enable hardware acceleration and can't add new virtual processors. also i can't install haxm for android development.
    btw I use Windows 10 Technical Preview.

  • MSI GT60-0NC SCM Bluetooth Problem!

    I own a MSI GT60-0NC Notebook. I have made a clean install of Windows 8 Pro. After that I installed SCM. But I have a problem. When I run SCM, bluetooth enters an endless loop which turns on and of with 1 second of delay without touching. What can cause this? Should I update BIOS? It will be my last choice though. Thanks in advance

    I had the SAME Problem with a GT70 bought on the 13.9.13!
    I update BIOS & EC!
    Now there is no loop, but i cant activate or deactivate BT. Win8 sasy its on, but no LED!
    Think this is a big BUG from MSI.
    At the old BIOS version you can uninstall SCM and reinstall KLM, than it works but no ECO/Fly Shortcut.
    With the new BIOS & EC the shortcuts work fine after clean install without SCM but no ECO & Fly shortcut. With SCM there is the BT issue and after deinstalling SCM no shortcuts work any more.
    MSI PLZ fix it!
    Place: Austria
    Edit:
    I tried it with the KLM & SCM NEW Version from the GT70 Dragon Extrem 2 Edition.......
    Same BT Issiu -.-

  • Msi 990fx gd65 cpu speed problem p2x4 965

    Hi im new here this is my first topic.
    I buy a Msi 990fx gd65 board my problem is everytime when boot up the pc the cpu freq. is 800mhz (4x200) i disable every power saving option and cool n quit thing, i must every time in click bios to adjust the frequency to 17x200 and restart to be enabled, i have a latest bios 19.9 a cpu is p2x4 965 be rev c3, 2x4gbddr 1600 Msi gtx 580 twin frozer and a chieftec psu 600w.
    The control center is installed and a click bios to.
    Thanks for a help and sorry for a bad english writing when exist.

    Quote from: mesco on 25-March-13, 04:57:09
    I just updated the bios from 19.9 to 20.1 and i have a black screen on startup try to revert the older bios but not succes what can i do?
    how did you correct this problem

  • MSI GE60 0ND - 298 - SCM problem

    Hey guys,
    I need an advice regarding the SCM manager for MSI GE60 0ND with 64bit Windows 8. After reinstaling my computer I installed all drivers from CD I received with PC but my pop-up icons doesn´t showing anymore. So I want to download SCM again but I can´t find a correct link. Please can you someone post here link to download this driver or give some advice how to solve this issue?
    Thank you a lot.
    (Sorry for my bad english :-) )

    Yep, here is the link:
    http://www.msi.com/product/nb/GE60-0ND.html#/?div=Utility&os=Win8%2064

  • Re: MSI GE60-0NC gaming problems

    try to run your game without battery.(remove your battery)Let us see what will happen.

     You can get W 10 chipset drivers from AMD (release date 7/28/2015) if MSI doesn't come up with them soon.
    This particular page is for W 10 64 bit.
       http://support.amd.com/en-us/download/chipset?os=Windows%2010%20-%2064

  • Need help with MSI GT70 0NC-029NE bluescreen problems

    I've just bought this new MSI computer, and downloaded a few programs like skype, steam, origins etc. When I open all of them at the same time, the bluescreen appears saying; memory management. The computer has 8gb ram, so it shouldnt really be a problem.
    Would really be nice with some help on this as it is quite annoying   

    Quote
    The computer has 8gb ram, so it shouldnt really be a problem.
    The amount of memory is not the problem, but a fault with the memory, or the memory controller (in the CPU) could be the problem.
    Is there a particular program that causes this BSOD?

  • MSI 990FX GD80 CPU Voltage problem

    Hello guys, I am new to overclocking and i think i have encountered a problem.  
    Whenever i try to increase my CPU voltage over 1.37 volts in B2 bios my PC freezes and cant boot up. The GPU fan ramps up for a moment and it sends a signal to the monitor but as soon as the monitor turns on there is no signal and it turns off. This keeps on going over and over until I clear CMOS.
    PC Specs.
    CPU: AMD Phenom II 945 95w x4 3.0ghz 945 (Deneb) (Waiting for FX8150..)
    RAM: Corsair XMS DDRIII 1600Mhz downclocked to 800Mhz
    MB: MSI 990FXA GD80 Military Class II AM3+
    GPU: ATI Radeon HD 5870 Sapphire CF
    GPU: ATI Radeon HD 5870 Asus CF
    PSU: Corsair AX850w
    Case: Corsair 650D
    I don't know if its a problem with the motherboard or the CPU but the reason i post this in MSI forums is because once unboxing the motherboard I've noticed that there were some scratches on the CPU socket. I don't really remember what it was but i thought it nothing serious.
    Sorry for my bad english...

    KellirSpree
    Welcome to club of owners 990FX-GD80, it is necessary to try new bios E7640AMS.B37 (v11.3B7).
    http://forum-de.msi.com/index.php?page=Thread&postID=783122

Maybe you are looking for

  • Hal and dbus not starting

    They are both in daemons...and for /etc/rc.d/hal restart it faisl same with dbus and with using 'start' instead of 'restart'. /usr/sbin/hald --daemon=no --verbose=yes gives me this: /usr/sbin/hald --daemon=no --verbose=yes 14:31:01.105 [i] hald.c:532

  • Adjustment Layers on GIF images?

    Whenever i try to add adjustment layers on my gifs, the result of the adjustment only comes in effect on the first frame, even when the adjustment layer is on the very top?

  • Determining Users without login page?

    I need some direction on a task I need to accomplish - any help or input would greatly be appreciated. Big Picture I have an application that three groups are going to be using. Each group uses the same database connection but use different tables in

  • Trouble with QuickTime Pro Activation

    I have upgraded from QuictTime 7 to QuickTime Pro on Snow Leopard. The instruction for activation is to click on the QuickTime icon in System Preferences. However, I do not have a QuickTime icon in System Preferences. As such, how can I activate QT P

  • SQL Loder

    Hi, I am loading the data using the SQL Loader with ".dat" file. The loader when ever founds the bad data it's writing bad data into "bad.dat" file. Instead of writing into bad file I have to call another procedure and storing into another schema . P