Msi ge60 2oe-002us Backlight not work !

Hello,
first i will say that my english is not good. Sorry for this.
So my laptop is ge60 2oe 002us . The S/N number is : GE602OE002USK1310000065.  I have Windows 8.1 pro 64bit.
I have the latest BIOS en EC firmware. The SCM is latest drivers. All the drivers are up to date.
And i have bought a new keyboard : http://www.ebay.com/itm/MSI-Genuine-GE60-SteelSeries-Blue-Backlit-Programmable-Keyboard-Windows-8-UI-/141115556957?pt=US_Laptop_Replacement_Keyboards&hash=item20db24845d&afsrc=1
I have mounted installed.
and the new backlight keyboard dont work when i press the button.
really terrible.

Yes I know but my laptop comes with a backlit keyboard and on the etiket says that it is a backlit keyboard.
I have never seen blue light on the top.
This is :
http://ca.msi.com/product/nb/GE60-2OE-002US.html#overview
Quote from: darkhawk on 12-January-14, 04:16:19
If you go to that Ebay page...the top of the item description says this:
**********Attention**********
*****This Backlit Keyboard Is Not Compatible With Previous GE60 Notebook Models That Shipped With A Non-Backlit Keyboard*****
Did your GE60 come with a backlit keyboard to begin with? If not, then you can't use one....

Similar Messages

  • MSi GE60 2OE 002US Backlight keyboard not work ?

    Hello everyone,
    My english is not good sorry for that.
    So i bought this laptop and everything is up to date but when i press the button on the top left of the keyboard, the led lights is not work. The latest SCM driver is also installed.
    the bios version is E16GCIMS.516
    EC Version is 16GCEMS1 5.06
    I have check the cable from the keyboard and the small cable ( thats under the hdd ) is good installed to the mobo.
    Please help and sorry for my bad english .

    Quote from: crracer_712 on 22-December-13, 01:22:46
    If this is a new laptop, I think I would either get ahold of MSI for warranty support or return it to the store you bought it from for repair or replacement.
    it is new but it has now no warranty because i have open the under hdd.
    And now i have a another problem. .!
    the battery was at 6% so I went charging.
    it says that the battery is charging but remains at 1%, and if I disconnect the adapter from the laptop, the laptop goes shutdown. 
    Without the adapter the laptop will not open.

  • New owner of MSI GE60 2OE-002US

    I want to reformat the computer and install only the programs which I need. Here are the default installed programs.
    i.imgur.com/nhmLNw5.jpg
    I know I won't need programs like Cyberlink PowerDVD, Microsoft Office, Norton, Windows Essential 2012 and WinZip, but what are the other "unnecessary" programs? I will still be installing the drivers, but I want to keep it to the bare minimum.

    Quote from: crracer_712 on 20-December-13, 03:34:23
    If this is a brand new setup, then first create a set of recovery DVD's and/or a USB recovery key using the MSI recovery software that is on the desktop. 
    As far as I know, there is no way to reformat the drive and install the OS only.  You might be able to do it if you have a Windows 8 OEM DVD, but using the recovery method, it will simply set the laptop back up to exactly how it was when it was received new.  You will be fine by simply uninstalling the apps you do not want.  If you run in to a situation where you see the computer, upon a restart, say it is configuring windows features, and seems to start at 15% and work very slowly, you may want to remove all optional language packs, then perform a sfc /scannow after reboot, then a subsequent reboot.  This will cure the 'configuring windows feature' that will most likely pop up at random restarts.
    Thanks. I have the DVDs that come with the laptop, is that fine? If I reset it to back when I received it, doesn't that mean the unnecessary apps will come back? I can also get Windows 8 DVD since it comes with my school for free for students, but I can just use that right?

  • MSI GE60 2OE - Nvidia card not recognized after shutting off the laptop

    So I received my laptop from RMA some days ago. It was just coz the plastic hinge of the screen, broke.
    When I received it, I had some Windows problems.So I reinstalled  it 3 times, the last one from a different ISO (all were official 8.1 windows isos). The last time seemed to work fine, until I noticed I had a problem. Everytime I turn off the laptop, and turn it on, the nvidia card (765M GTX) isnt recognized. It doesnt appear in device manager at all, or it appears as unknown 3D device.I have to uninstall intel gfx drivers, nvidia drivers, and run Display Driver Uninstaller , so the drivers recognize the card again. But if I shutdown the laptop, then I have to repeat this process again...
    I tried different drivers, updated other component drivers from http://www.station-drivers.com/ , I have the latest BIOS, etc..
    When the card is being recognized, it works fine, no overheating nor artifacts in games.
    What can it be?

    have you done OS restore to factory default?
    or a new fresh OS installation?
    Or when you turn it off,
    then boot to DOS and see if nvflash will see the card
    this will help to isolate if its Win OS issue or something else hardware related

  • Msi ge60 2oe-002us unlocking

    hi
    i want to overclock my 765m core more than 135 mhz but its locked
    i dont know with unlocking bios can do oc my 765m more than 135 mhz or i should use vbios
    what are the advantage of unlocked bios ?
    guid me pls

    sorry for my late reply [too busy]
    Quote
    how can i do vbios modification      ?
    it will be don by your vbios tuner app ?
    yes you can do this by yourself with my vbios tuner
    Quote
    i want to add more than 135 mhz to gpu core without flashing my gpu bios
    after modification you have to flash it once, after that you can set more MHz on the fly

  • MSI GE60 2OE 102XAE DRIVERS AND BIOS UPDATE

    Dear MSI user, Profession and support team
    I bought new MSI GE60 2OE 102XAE today (with below specifications)
    CPU Intel® Core™ i7-4800MQ Processor 2.70GHz With turbo boost UP TO 3.70GHz, cache 6 MB, QuadCore,8 Threads
    Ram 8GB DDR3 1600 (2*4Gb)
    HDD 1TB SATA+ 64Gb ssd
    Screen 15.6" Full HD LED (1920x1080), Anti-glare
    GPU nVIDIA Geforce GTX765M 2.0 GB DDR5 UpTo 4000Mb shared
    Communication WiFi,Killer Gaming LAN, Bluetooth 4.0
    Drive DVD/RW Super-Multi
     and I have couple of questions
    1-I want to install win8.1 64 bit for the first time, should i upgrade Bios (current version is 5.06)?
    2- where can i find Drivers for win8.1 64bit(its own cd drivers is only for win 864 bit) because the model that Msi put in Main site
    is little bit diffrent (MY laptops cpu is 4800MQ)
    thanks indeed in advance.
    with best regards

    Hello,
    No you don't have to upgrade BIOS, and if not required, don't do this. Very risky thing to do, especially on NB.
    It doesn't quite matter if your CPU is i7 or i5 (just an example), as the drivers are pretty much the same (apart from chipset). Also I think that if 8.1 SW is not available on MSI's website, then using win 8 should work fine too. Just about to try this out by you
    Regards

  • MSI GE60 2OE Nvidia GTX 765m problem

    Hi,
    this is my first post here i bought MSI GE60 2OE 4 days ago i cant seem to run a single game for more than 5minutes, i get this error " your display driver has stopped responding and has resovered" NVIDIA windows kernel Driver, i tried using the lastest Beta drivers also which are 326.1 , also i ran driver sweeper before installing it, i also did a clean install of windows 8. im very frustrated i've spending hours on the interenet looking for a solution.  the games i tried were bo2, LoL , metro LL , GTA IV , i cant play any of them for more than a few minutes my screen goes black and i get this driver has stopped working error. i did everything... reinstalling multiple times the drivers, reinstall the windows..  sometimes the laptop just gets stuck, i have to hold the power button and reboot..
    my video card is NVIDIA GTX 765m
    here is a screenshot of the issue

    I'm with Svet on this one.
    >>How to contact MSI.<<

  • MSI GE60 2OE touchpad

    Hi,
    I just purchased MSI GE60 2OE. Upon using it, realized that the touchpad clicks at even a slight touch (almost the entire touch pad, not just the left and right click buttons). When i say click, i mean it produces that "clicking" sound, like as though u just left/right clicked. I thought it served the same function as the left click button but when i tried it, nothing happens. I'm wondering if the clicking of the touchpad is normal and what is its function.
    Thanks! 

    I can only speak about my GT70 0NE, and it doesn't have any 'clicking' type ability, and the touchpad is very solid feeling (as in I can't make it click when pressing hard on it).
    Something doesn't sound right to be honest. Unless this is a new feature that they added recently to the notebooks.

  • MSI GE60 2OE - blocked, Win 8.1 trouble

    First of all, Hello everybody!
    I'm in big trouble with my MSI, I got stuck and don't know what else to do. I have been trying to fix for three days, looking for information, I have read most of sticky post and searching in the forum and I haven't found any working solution.
    I purchased my GE60 2OE about two months ago. I have been used it happily since first day with Win 8.1
    I installed a mSata SSD and removed the old hard disk in order to make a clean install, then I started to install Win 8.1 but I cancelled it just after the installer formats the hard disk (I was installing it on the mSata) in the same installer I erased the partitions created so I could restart the installation from the beginning, but when I cancelled and restarted the installation the problem was there:
       The laptop starts and stops just at the beginning, with a blank screen. When I restart and press F12 or supr, or F11 for selecting boot device, a single line appears but I can't get into the bios neither select any device. I have discovered, that removing any hard disk and starting only with the Usb with Win 8.1 installer, first appears the blue windows logo, after that a blue screen appears: "your pc got into a problem and needs to restart..." "acpi bios error" and immediately reboots in a loop with the same thing. May be it's a error with the uefi Bios and Win 8.1
    The current bios version: E16GCIMS.517 (I updated it, I think it was fine, installation went OK and I restarted the laptop twice)
    The set up in the bios was AHCI, and UEFI.
    Also I remember just before the installation I changed not to display the msi logo, just for trying what happened.
    Well, I have tried with many rescue bootable Usb, linux distributions, and none of then starts, it just freezes at start with a blank screen.
    I can't get into the bios, even I can't flash it, I have tried with bootable usb with bios flashing and nothing.
    I have read that clearing the CMOS may help, but I can't find any jumper or button in the laptop, I have tried to unplug AC, disconnect the motherboard power for few minutes, etc. and no results.
    I don't know what else I can do. Please, any different point of view or any help would be welcome.
    Thank you very much!

    Quote from: Mike1793 on 20-January-14, 01:09:25
    nvm problem solved =D
    Same prob here. I installed win8.1 and the light is orange always. How did u solve this?

  • GE70 2OE keyboard backlight not functional

    Hello! I just recently bought a MSI GE70 2OE from Newegg. It was advertised as having a blue backlight.
    However, after installing windows 7 and updating all the drivers using LiveUpdate, the keyboard will not light up.
    The other function keys work fine, but when I press the Fn+- or Fn++ the keyboard does nothing. I also noticed some people mention that it would take them to the dragoon army website, but it has never done that for me. It simply does nothing.
    I downloaded the windows 7 bios update for this laptop from the MSI site, and used the installer.
    it popped up a CMD window and did some stuff then told me to restart. I did and no change
    I also reset the ECM or whatever by shutting down by holding the power button till it shut off, removing the battery and power cord and letting it sit for an hour. overkill on the hour i know but i fell asleep waiting on it XD
    anyways, ive searched and searched and can't find any other things to try.
    ideas?
    Thanks
    Dusty

    It seems MSI tech team is doing good service here.
    Of course we customers will feel worry free once the trouble come to us.
    Just come here and post the question, and we'll get satisfied!
    Quote from: hch;103115
    Uninstall the old drivers then install with the new ones.
    Update the EC firmware to version 507
    http://dl.msi.com/download_files/frm_exe/w8_1757EMS1.507.zip

  • MSI GE70 2OE keyboard backlight

    Hi,
    I have Msi ge70 2oe-201tr notebook. I used ''remove everything and reinstall windows'' option for a few problems. However, the backlight button isn't working after reseting. How can I solve this problem?

    Quote from: darkhawk on 07-March-14, 10:31:12
    The keyboard backlight button? Have you reinstalled SCM?
    Have you tried to do the Embedded Controller reset procedure?
    I hadn't heard . Can you tell me how to do the Embedded Controller reset procedure?

  • MSI GE60-2OE Fan Issue

    Hello
    So I've had mine MSI GE60 for little over a year now and recently the fan has been making 'rattling' and 'grinding' noises. I went onto the forums and search for similar topics and people said there are a  few possibilities.
    1) Fan is not balanced
    2) Dust build-up
    3) Fan bearing being used up
    Many people said to contact MSI and ask for a replacement fan if the laptop is on warranty (Mine still is, Until Feb 2016)
    However here is the problem. When I purchased the laptop I registered it straight away. Now when I go onto the MSI Register Product page it is not there. I am being asked for the serial number of the Laptop but I don't have the box. I have the proof of purchase and all the warranty documentation but dont know where to look for the Serial Number of the Laptop. It is not on the back Sticker. All it says is "GE60 2OE I77400MQ / 16GB / 1000GB / GTX765M FHD"
    Is there any other way to get the serial number of the laptop? Device Manager? BIOS? (I'm running Win 8.1)

    try removing the battery - my GE60 has a sticker, with the serial number on the battery slot which will reveal once you remove it. good luck on your RMA :D

  • MSI GF4 Ti 4200 Td not worked!!

    Hallo
    I have new computer
    P4 2GHz, 2 x 512 DDR (266MHz), 80 GB HDD, GF4 Ti4200 128 mB DDR (MSI), MSI 845e Max2 BLR (mth..).
    Win 98 and Win Me not worked!!! Why?????
    Win XP and Win2000 running ok.

    I dont know exactly what is your problem?
    But if other OS is OK, this pretty much a driver issue.

  • Msi enjoy71 tablet's camera not working

    Hi ..can anyone please help me with my tablet's camera..I just got this tablet a couple of weeks ago,and the camera isn't working it keeps saying can't connect to camera or gallery has stopped ..first I installed another camera program from the play store it worked with the front camera but didn't work with the camera facing me..then I installed permission manager but it was useless.. at last I reset the tablet to factory reset.. and when I opened it the front camera worked but when I tried opening the camera facing me it stopped and said the gallery has stopped..and both cameras didn't work since then..one thing I have to mention ..that is a couple of days ago I inserted an old memory card I had in my old Mobile.. but discovered that some programs got effected and stopped working and I had to reinstall them again.. so I removed it..and that was before resetting the tablet...I hope you can help as I can't register in the official website for MSI..its not working... thanks alot

    OK- ran hardware test as per manual. Nothing untoward found. So it MUST be a software issue, right?
    This is the same MacBook Pro as the other one. Only THIS one was asked to use Firewire to transfer data from the one it replaces instead of me first registering it.
    Anyone have this?
    Camera kind of works (flashes into dark sepia but quickly fades to either complete black or some white spots from lights) and green light IS on when it should be.

  • Problem with Macbook Pro early 2011, webcam not working in any apps and windows 7 or 8 on bootcamp, keyboard backlight not working?

    Hi Guys
    I recently bought a second hand early 2011 Macbook Pro 15 inch and are having 2 problems. The first is that none of the apps detects my webcam at all, the second is, i have Windows 8 installed on bootcamp but are unable to get the keyboard backlight to work in 7 or 8. The backlight works perfect in os x 10.8.5 though. I need a little bit of help guys.....

    Go to Apple Menu / About This Mac. Click on More Info ... next on System Report. In the left hand column, under Hardware, select USB. The right side will show the USB Device Tree. Look through that and check for "Built-in iSight". That is your camera. If it is not listed the camera is not working.
    For backlighting, try this: go to System Preferences / Keyboard. Uncheck "Adjust keyboard lighting in low light".

Maybe you are looking for

  • Beta 4.1 and Version 1.0 problem

    About a week ago, I imported about 200 new images to my 2000 image library. After processing them as I normally do, something bad happened. I don't know what, but I see the effect. If I select an image from the film strip in the Develop module while

  • Cant get bill miller radio program to show in Itunes.

    I have downloaded the Bill Miller radio program with Johnny Cash to Itunes but whenever I go into Itunes the one hour program does not show up for me to update it. After updating the podcast I then put it in my playlist and can burm it on a CD. How d

  • TO_DATE function's weird feature

    Hi Friends, Is the following statement workable? select to_date('09,06,16 12:12:59','yyyy-mm-dd hh24@mi,ss') from dual; My own anwser is YES but the result is decided by NLS_DATE_FORMAT. Have you any different opinions?

  • IDOC of message type COMCMT

    Hi, Does anybody know how to generate a IDOC of message type CODCMT do you have some doc about it? Thanks alot Regards, Zheng Edited by: zhengliu on Jun 16, 2009 12:09 PM Edited by: zhengliu on Jun 16, 2009 12:10 PM

  • Downconvert from LabView 2011 to 2009

    Hi ! Can anyone convert these VIs (attached file) from Labview 2011 to LabView 2009 ? Thanks a lot. DMONS Solved! Go to Solution. Attachments: LCC25 driver for LabView 2011.zip ‏4308 KB