MSI GE60 2OE - Nvidia card not recognized after shutting off the laptop

So I received my laptop from RMA some days ago. It was just coz the plastic hinge of the screen, broke.
When I received it, I had some Windows problems.So I reinstalled it 3 times, the last one from a different ISO (all were official 8.1 windows isos). The last time seemed to work fine, until I noticed I had a problem. Everytime I turn off the laptop, and turn it on, the nvidia card (765M GTX) isnt recognized. It doesnt appear in device manager at all, or it appears as unknown 3D device.I have to uninstall intel gfx drivers, nvidia drivers, and run Display Driver Uninstaller , so the drivers recognize the card again. But if I shutdown the laptop, then I have to repeat this process again...
I tried different drivers, updated other component drivers from http://www.station-drivers.com/ , I have the latest BIOS, etc..
When the card is being recognized, it works fine, no overheating nor artifacts in games.
What can it be?

have you done OS restore to factory default?
or a new fresh OS installation?
Or when you turn it off,
then boot to DOS and see if nvflash will see the card
this will help to isolate if its Win OS issue or something else hardware related

Similar Messages

MSI GE60 2OE Nvidia GTX 765m problem

Hi,
this is my first post here i bought MSI GE60 2OE 4 days ago i cant seem to run a single game for more than 5minutes, i get this error " your display driver has stopped responding and has resovered" NVIDIA windows kernel Driver, i tried using the lastest Beta drivers also which are 326.1 , also i ran driver sweeper before installing it, i also did a clean install of windows 8. im very frustrated i've spending hours on the interenet looking for a solution. the games i tried were bo2, LoL , metro LL , GTA IV , i cant play any of them for more than a few minutes my screen goes black and i get this driver has stopped working error. i did everything... reinstalling multiple times the drivers, reinstall the windows.. sometimes the laptop just gets stuck, i have to hold the power button and reboot..
my video card is NVIDIA GTX 765m
here is a screenshot of the issue

I'm with Svet on this one.
>>How to contact MSI.<<

Airport Card Not Recognized after Leopard Install

After the Leopard install the airport card on my Dual 1.8 G5 is not being recognized (the airport menu reads "no aiport card installed". Of course there is a card and when booting a from Tiger there is no problem. It's a stock apple airport card. Any suggestions?

Interesting update...
After reading several other threads of semi-related topics, I decided that there's no harm in reinstalling the software. After placing in the disk and restarting you get the WELCOME splash screen. On the menu bar, you can choose to view the System Profiler prior to installation. My Airport Card did how up here - telling me that it's not a hardware issue. I'm in the process of re-installing 10.5 - which will take 1-2 hours to complete. I'll let you know how it works out.
parrots

Msi ge60 2oe-002us Backlight not work !

Hello,
first i will say that my english is not good. Sorry for this.
So my laptop is ge60 2oe 002us . The S/N number is : GE602OE002USK1310000065. I have Windows 8.1 pro 64bit.
I have the latest BIOS en EC firmware. The SCM is latest drivers. All the drivers are up to date.
And i have bought a new keyboard : http://www.ebay.com/itm/MSI-Genuine-GE60-SteelSeries-Blue-Backlit-Programmable-Keyboard-Windows-8-UI-/141115556957?pt=US_Laptop_Replacement_Keyboards&hash=item20db24845d&afsrc=1
I have mounted installed.
and the new backlight keyboard dont work when i press the button.
really terrible.

Yes I know but my laptop comes with a backlit keyboard and on the etiket says that it is a backlit keyboard.
I have never seen blue light on the top.
This is :
http://ca.msi.com/product/nb/GE60-2OE-002US.html#overview
Quote from: darkhawk on 12-January-14, 04:16:19
If you go to that Ebay page...the top of the item description says this:
**********Attention**********
*****This Backlit Keyboard Is Not Compatible With Previous GE60 Notebook Models That Shipped With A Non-Backlit Keyboard*****
Did your GE60 come with a backlit keyboard to begin with? If not, then you can't use one....

Wifi card not recognized after reboot.

I've got a Lenovo X140e and an Intel wifi card. (Intel Corporation Wireless-N 7260) that I installed myself, since the support for the Broadcom card it came with was spotty.
If I reboot my laptop, the card won't show up with either iwconfig or even lspci. If I do a cold reboot (power down entirely and start back up), it will show up just fine.
What gives?
Relevant lspci output:
01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 4b)
Subsystem: Intel Corporation Wireless-N 7260
Flags: bus master, fast devsel, latency 0, IRQ 38
Memory at f1300000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi

When the card is recognized, rfkill lists it as unblocked; when it's not recognized, it doesn't show up at all.
I've got i3 installed; for connection management I've been sort of trying different things - netctl never works but wifi-menu has been pretty reliable. I haven't installed any special power management stuff at all - I'm not really sure how to find out what was auto-installed?

How can I turn off the laptop after restoring it to factory settings?

Hello everyone
I am selling my Portege R830-10Q so I want to restore it to factory settings (out-of-box state) AND THEN TURN IT OFF.
I have successfully brought the laptop to factory settings by using the _TOSHIBA Recovery Wizard_ and choosing *Recovery of Factory Default Software (Recover to out-of-box state)*. However, at the end of the recovery process and after everything is re-installed I was not able to TURN OFF the laptop. I was only given the option of restarting it. After restating it, the Windows set-up process starts.
I don't want to set-up Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows set-up for the person who buys the laptop from me. How can I switch off the laptop after the system recovery without having to set up Windows?
I'd really appreciate your help.
Regards
Pedro

When recovery procedure is finished and you are asked for restart just press power button and switch it off. I think it only thing you can do.
Anyway, why not to start Windows and go through setup option. New owner can change this basic settings anyway. As username put Admin and language and keyboard can be set as default.
For instance, if you have German recovery image set everything to German. New owner can change it anyway.

GeForce4 TI Video Card Not Recognized Anymore?

For about almost a year, the fan on the GeForce4 TI video card would occasionally make a grinding noise, although it has always been easily fixed by lightly sticking a finger on the fan to stop it for a second and it would go back to normal.
However, about a month ago this little fix stopped working. The grinding noise was unbearable. After searching the Internet for a few minutes, I found out that I wasn't the only one suffering from this problem, and some even offered tips on how to replace the fan.
I followed the steps very carefully and made sure the card was not harmed. After installing the new fan, which was very easy, I stuck it back into the Power Mac and boot it up. However the monitor didn't find a signal.
I was glad that I installed Remote Desktop on the Power Mac so I was able to connect to it and see what's going on. I opened Apple System Profiler and noticed that the computer isn't properly recognizing the graphics card anymore! Instead of the very detailed information I'm used to seeing, this is what I saw below:
pci10de,a:
Type: VGA-Compatible Controller
Bus: AGP
Slot: SLOT-1
Vendor: nVIDIA (0x10de)
Device ID: 0x252
Revision ID: 0x00a3
I have no clue what this means as it seems like the computer still recognizes A video card. Also this also gave me the impression that the Power Mac is missing the drivers, but that's impossible as I haven't touched the software on the hard drive and nVidia drivers are part of OS X.
If the card is broken then fine, I'll take my losses and buy a new one as I would hate to just throw the computer away since it still more than fulfill my needs. But I just hope the AGP slot isn't broken.
Any ideas? Thanks in advance.

Just for clarification:
You have two systems based on the same MS-7008 mainboard, correct? Both use the same BIOS Version?
In one system, the card is functioning, running in AGP 3.0 Mode x8 and in the other, same mainboard model, what are the symptoms of "video card not recognized" besides the AGP 2.0 Mode x4 limitation?
I mean, if you can see the BIOS Setup, the card is putting something out on the screen, right?

MSI GE60 2OE 102XAE DRIVERS AND BIOS UPDATE

Dear MSI user, Profession and support team
I bought new MSI GE60 2OE 102XAE today (with below specifications)
CPU Intel® Core™ i7-4800MQ Processor 2.70GHz With turbo boost UP TO 3.70GHz, cache 6 MB, QuadCore,8 Threads
Ram 8GB DDR3 1600 (2*4Gb)
HDD 1TB SATA+ 64Gb ssd
Screen 15.6" Full HD LED (1920x1080), Anti-glare
GPU nVIDIA Geforce GTX765M 2.0 GB DDR5 UpTo 4000Mb shared
Communication WiFi,Killer Gaming LAN, Bluetooth 4.0
Drive DVD/RW Super-Multi
and I have couple of questions
1-I want to install win8.1 64 bit for the first time, should i upgrade Bios (current version is 5.06)?
2- where can i find Drivers for win8.1 64bit(its own cd drivers is only for win 864 bit) because the model that Msi put in Main site
is little bit diffrent (MY laptops cpu is 4800MQ)
thanks indeed in advance.
with best regards

Hello,
No you don't have to upgrade BIOS, and if not required, don't do this. Very risky thing to do, especially on NB.
It doesn't quite matter if your CPU is i7 or i5 (just an example), as the drivers are pretty much the same (apart from chipset). Also I think that if 8.1 SW is not available on MSI's website, then using win 8 should work fine too. Just about to try this out by you
Regards

SB04100 Sound Blaster Card not working after computer rebuild

=SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
Everything works for now -- I'll be glad to get this particular computer out of my house !

MicroSD Card not reading after upgrade to Windows 10

I am using a 64GB SDXC card in my Lenovo YOGA Tablet 2-1051-F, with Windows 8.1. I formatted the card to NTFS. Everything was working fine, but now that I have upgraded to Windows 10, the only problem seems to be the card is not recognized any longer. The "SD" logo shows up in the "This PC" window, but when I try to click on it (left or right), it hangs and then after quite a while it asks me to insert a card. I have installed all the driver updates from the Lenovo support site (no downloads specific to the card reader). No change. I even downloaded a driver file from Realtek and ran it - maybe a mistake, but it doesn't seem to have changed anything at all. I don't seem to be able to find any information regarding the drivers for the reader or reinstalling them. Thanks for any suggestions! BTW, the card still reads fine when I put it in a slot on another machine.

I have the exact same problem using a Transcend 64GB SDXC card and Lenovo 1051F.The card worked before upgrading and works in other computers/readers. Extra informations : After upgrading when the micro sd card is in slot : - The tablet can't shutdown (error after several minutes) - The card is not properly recognized (appears sometimes in explorer but can't access to content) - Windows Explorer crashes and freezes randomly - Longer boot time - Bluetooth randomly fails to pair with bundled keyboard and a logitech bt mouse When I remove the sd card everything works as indended. No lag, bt works fine, boots and shutdowns fast...

MSI GE60 2OE touchpad

Hi,
I just purchased MSI GE60 2OE. Upon using it, realized that the touchpad clicks at even a slight touch (almost the entire touch pad, not just the left and right click buttons). When i say click, i mean it produces that "clicking" sound, like as though u just left/right clicked. I thought it served the same function as the left click button but when i tried it, nothing happens. I'm wondering if the clicking of the touchpad is normal and what is its function.
Thanks!

I can only speak about my GT70 0NE, and it doesn't have any 'clicking' type ability, and the touchpad is very solid feeling (as in I can't make it click when pressing hard on it).
Something doesn't sound right to be honest. Unless this is a new feature that they added recently to the notebooks.

MSI GE60-2OE Fan Issue

Hello
So I've had mine MSI GE60 for little over a year now and recently the fan has been making 'rattling' and 'grinding' noises. I went onto the forums and search for similar topics and people said there are a few possibilities.
1) Fan is not balanced
2) Dust build-up
3) Fan bearing being used up
Many people said to contact MSI and ask for a replacement fan if the laptop is on warranty (Mine still is, Until Feb 2016)
However here is the problem. When I purchased the laptop I registered it straight away. Now when I go onto the MSI Register Product page it is not there. I am being asked for the serial number of the Laptop but I don't have the box. I have the proof of purchase and all the warranty documentation but dont know where to look for the Serial Number of the Laptop. It is not on the back Sticker. All it says is "GE60 2OE I77400MQ / 16GB / 1000GB / GTX765M FHD"
Is there any other way to get the serial number of the laptop? Device Manager? BIOS? (I'm running Win 8.1)

try removing the battery - my GE60 has a sticker, with the serial number on the battery slot which will reveal once you remove it. good luck on your RMA :D

HT202274 Password change old password not recognized after 10.9.5 upgrade

God bless you, peace.
macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
1. Tech work replaced optical drive,
2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

Try running the combo update. It fixes more files/data than the App Store upgrade.
10.9.2

Logitech trackball not recognized after 10.5.8 update- LCC 3.1 needed

Logitech Trackman wireless trackball was not recognized after 10.5.8 upgrade. At re-boot, the "searching for bluetooth mouse" screen appeared, pushing the re-set button on the wireless base and trackball did not solve the problem.
Had to plug in my Apple mouse (worked immediately), go to the Logitech website and download the latest Logitech Control Center software for Snow Leopard, dated 9/22/09 (version 3.1)
After install and re-start, Logitech hardware worked perfectly, as before.
Not sure if it would avoid this issue, but I recommend installing LCC 3.1 before you install the 10.5.8 update. That or be sure you have an Apple mouse on hand.

aaron08544 wrote:
Turns out the 10.5.8 update is missing a very important file which is
/usr/X11/lib/X11/fonts/misc/fonts.alias
After I copied one from my Centos 5.2 box, things are finally back to normal.
-Aaron
I have that file on my system and x11 was updated using 10.5.8 combo update. it works just fine.

Camera RAW, file not recognized after import and migration, Aperture 2.1

Hi,
I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
Thanks,
Greg

Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
please help! I've got 987 raw wedding photos to process!!
I dont know what to do!

MSI GE60 2OE - Nvidia card not recognized after shutting off the laptop

Similar Messages

Maybe you are looking for