Msi ge60 ond graphic drivers problem
I installed new windows on msi ge60 ond and first intel vga driver and then nvidia driver and the nvidia driver doesnt work |Windows has stopped this device because it has reported problems. (Code 43)|.
Have tried removing them all (Driver Fusion) and reinstalling, didn't fix my problem. Can you help me?
You tried to install what Windows and what Windows came with the notebook?
Similar Messages
-
MSI GE60 OND with windows 8 battery problem !!
Hi
next week I bought msi ge60 ond with Windows 8
when i shut down Windows 8 on my laptop my battery will discharge in 3 days when i open it the battery Show max %5 charge is there a problem with my laptop please help thanksthink windows 8 is the problem, which do not really shutdown and you told to shutdown,
but put in sleep state and drain the battery
see https://forum-en.msi.com/index.php?topic=166115.msg1217857#msg1217857 -
Bios Unlock MSI GE60 OND Request
Hello, i have a MSI GE60 OND and i need to unlock my bios especially for those features:
- Newest BIOS/Firmware
- switchable graphics --> so i can turn off sometimes my nvidia card.
- vBios --> so i can overclock my nvidia card (overclock limit cancel +135 MHZ...)
- Over/undervolt and Over/underclock (with multiplier) Cpu
- All other features that is possible :-D, but pls don`t change the Fan or something.
I already made a Donation 2GK8061366286742R (if everything works well, i will give a second Donation ;-)
Best regards
My Notebook:
Bios Version E16AIMS.10F
Bios Build 12/18/2012 15:20:43
EC Version 16GAEMS1 Ver.4.04
EC Build 04/26/2012
i7-3630QM, Nvidia GTX 660M
IGFX vBios Version 2126 (maybe u need this :-S)
Memory 1 : 4096 MB
Memory 2 : 4096 MB
ME FW Version 8.0.2.1410
Windows 7
250GB Samsung 840
p.s, I replaced my wireless card with a Atheros AR9380.Hello,
Quote
i have a MSI GE60 OND and i need to unlock my bios especially for those features:
Quote
- Newest BIOS/Firmware
oki, will update it with latest intel's storage fw
Quote
- switchable graphics --> so i can turn off sometimes my nvidia card.
haven't tried this personally but should works. [other people reported that works fine to turn off dedicated card]
Quote
- Over/undervolt and Over/underclock (with multiplier) Cpu
cpu voltage is typically N/A
about MP, this depend of CPU used, if you have XM chip then you can go over.
For your i7-3630QM you can go over.
Quote
- All other features that is possible :-D, but pls don`t change the Fan or something.
oki
Quote
- vBios --> so i can overclock my nvidia card (overclock limit cancel +135 MHZ...)
oki, in add on to this also will add performance tweaks & disable boost with no throttle.
Quote
I already made a Donation 2GK8061366286742R
received it.
Quote
(if everything works well, i will give a second Donation ;-)
aha oks, thanks
will work over it and send back to you when its done.
will take some time, normally 2-3 hours. -
MSI GE60 OND-614SA BLACK SCREEN
hi guys need your help/assistance/opinion and solution about my msi ge60.
1. i always leave my laptop at home open, when i come home. it wont boot anymore.
2. when i press power, only black screen.
3. no indication of led's reading hard drive or something. the only led light is the power led.
4. i already risk the warranty on my part because i open it thinking that maybe its just a memory problem or hard drive problem.
5. but still the same.
anyone have idea or same problem with me.
thanks.Quote from: ilokaok_99 on 24-January-14, 00:54:13
ive read already the topics that could help to solve this issue. but the problem is that their issue is not the same like me...when i open my laptop...only black screen nothing else happening...i try the ec reset...nothing happened...
Did you try hard rebooting? Is the AC plugged in? Is the led blinking or just shinning? -
MSI GE60 0ND - 298 - SCM problem
Hey guys,
I need an advice regarding the SCM manager for MSI GE60 0ND with 64bit Windows 8. After reinstaling my computer I installed all drivers from CD I received with PC but my pop-up icons doesn´t showing anymore. So I want to download SCM again but I can´t find a correct link. Please can you someone post here link to download this driver or give some advice how to solve this issue?
Thank you a lot.
(Sorry for my bad english :-) )Yep, here is the link:
http://www.msi.com/product/nb/GE60-0ND.html#/?div=Utility&os=Win8%2064 -
[MSI GE60 0ND] VT-X Problem
Hi,
I use Msi GE60 0ND. I need VT-X support for virtualbox. Intel I7 3630QM seems have VT-X support but i can't enable VT-X on bios. There is no option to available it. I checked bios version and it seems up to date.
I need your helps.
BTW i use windows 10 technical preview.i can use virtual box there is no problem while setup and use it. but i cant enable hardware acceleration and can't add new virtual processors. also i can't install haxm for android development.
btw I use Windows 10 Technical Preview. -
MSI GE60 2OE 102XAE DRIVERS AND BIOS UPDATE
Dear MSI user, Profession and support team
I bought new MSI GE60 2OE 102XAE today (with below specifications)
CPU Intel® Core™ i7-4800MQ Processor 2.70GHz With turbo boost UP TO 3.70GHz, cache 6 MB, QuadCore,8 Threads
Ram 8GB DDR3 1600 (2*4Gb)
HDD 1TB SATA+ 64Gb ssd
Screen 15.6" Full HD LED (1920x1080), Anti-glare
GPU nVIDIA Geforce GTX765M 2.0 GB DDR5 UpTo 4000Mb shared
Communication WiFi,Killer Gaming LAN, Bluetooth 4.0
Drive DVD/RW Super-Multi
and I have couple of questions
1-I want to install win8.1 64 bit for the first time, should i upgrade Bios (current version is 5.06)?
2- where can i find Drivers for win8.1 64bit(its own cd drivers is only for win 864 bit) because the model that Msi put in Main site
is little bit diffrent (MY laptops cpu is 4800MQ)
thanks indeed in advance.
with best regardsHello,
No you don't have to upgrade BIOS, and if not required, don't do this. Very risky thing to do, especially on NB.
It doesn't quite matter if your CPU is i7 or i5 (just an example), as the drivers are pretty much the same (apart from chipset). Also I think that if 8.1 SW is not available on MSI's website, then using win 8 should work fine too. Just about to try this out by you
Regards -
MSI kt880 Delta + Graphics card = problems
Hola,I am Spanish pardon for if he doesn't understand each other well something, I have problems he gives video, mainly it is noticed with the windows media player, when reproducing music the visualizations ,si they are interrupted I select complete screen it works perfect,the problems they are also noticed in other moments ,for example when turning off windows that is noticed like a series gives waves he gives the sea, I have experiment with two graphics cards you different and I have the same problems,the drivers and Bios they are the you finish official.
My team is:
MSI KT880 Delta
AMD XP 2400+
2x512MB kingston
Abit siluro geforce 4mx 440 64MB 4x
POV GEFORCE 6 6800GT 256MB 8X
HD SEAGATE 160GB
HD SEAGATE 60GB
greetings and thank you.Hello, I have formatted twice and with two different hard disks, I have
installed the last drivers give VIA, it finishes it bios and I have proven
other (1.96) that end up he gives to find in a post he gives this forum, I have
proven the memoirs in single and double channel, I have proven with other
memoirs that I have 2x256MB DDR266,y they follow the problems and I have found
a post with a problem the same as mine
https://forum-en.msi.com/index.php?PHPSESSID=479c7a6b846fca06ad6961315d94d6c3&topic=71718.0
I also mean that playing (3D) I don't have problems , in 2D he doesn't go wel l
Thanks -
After win 10 upgrade my probook 450 g1 graphics drivers problem
After i upgrade my os to win 10 the graphic driver has a problem my laptop is probook 450 g1 please support the new windows quickly
As a long time Windows 10 tester, I have found by and large that the Windows 8.1 drivers will work, albeit sometimes in a limited fashion. So if you're running the Intel 4600 Graphics chip, use the Windows 8.1 drivers, they will work.
-
MSI GE60 2PE DVD Drive problem
Hello. I've bought a new GE60 2PE for Christmas and today I received it. After installing Windows 8 I inserted the Driver's CD that comes with the laptop and everything worked fine, I installed the LAN (Killer) drivers. A few minutes later I tried to install more drivers but to my surprise the computer couldn´t read the CD anymore. I tried to reinstall windows but the problem is still there.
Any advice?I've cleaned the lens again and look like this time it worked. I'll keep the post updated if it starts to fail again.
-
After upgrading to Windows 10 my pc has gone into all sorts of troubles .The graphics driver do not work. due to this , i cannot change my pc's brightness and my pc does not turn off completely .But unlike others my pc boots up quiet fast . Please reply to the querry asap.
Try this for your brightness control problems: I fixed this on my Envy 15 j151sa - Settings > Display > Advanced Display Settings > Display Adapter Properties Then Properties > Driver Tab > Update Driver button. Voila!
-
MSI Ge60 0NC Cpu Heat Problem (80C degree)
Hi!
I was having problems to play even low graphical games. I was thinking the problem was Nvidia Graphic Card.
But I found that it wasn't. When i open CPU thermometer it shows 80 C degree while doing nothing. What can be the problem? Is it based on hardware or software?Hi!
At start it is 60 C degree. After 5 min. with doing nothing it becomes 80 C degree.
Under load temp is approximately 90 C degree. I test and monitor it with the "Intel BurnTest" and "CPUThermometer".
But even it shows 90 the air which going out is cool. It should have to be so hot but it isn't. I think the problem is thermal compound. Thanks god the warranty is still continuing. -
MSI GE60 0ND i5 touchpad problem
as stated above i got a problem with my notebook touchpad, the left click button at start up is clicked or drag as shown on the notification bar that it is always clicked so i cant use the tapping in my touchpad and the left click button, only the right click button was functioning but when i disable the left and right click button, the touchpad tap function works. please help
as shown above the elantech logo the left click is always like that after clicking the touchpad or left click or right click of the touch pad. an external mouse works perfectly but i want to solve this problemQuote from: sadallstar12 on 13-January-14, 19:41:09
the notebook is new, but the problem is it has a warranty sticker, and that all other physical devices like mouse/keyboard is working correctly:
Note: Disabling the 2 buttons(left and right click button) of the touchpad makes the double tap working, but also u cant use the 2 button cause its disabled.
The warranty sticker is there to keep people from opening it up and messing things up when they don't have the experience.
If you look at the FAQ at the top of the notebook section, there is more information there regarding this. If we weren't able to open the bottom panel, we couldn't upgrade the RAM or install a new SSD or HDD.
Anyway.....if you don't feel comfortable doing it, I would contact MSI to do an RMA. It doesn't seem that it's a software problem.
>>How to contact MSI.<< -
Hello guys,
Let put this clear, i messed up.
I had windows 7 pre-installed and i wanted to try some Vbios modded, but i wasnt hapy with it, so i decided to go back with my stock bios... there the problems began
The guy on the forum (a french forum, portable4gamer ) put the stock vbios from a windows 8 edition, the E16GAIMS.514 in the stock win7 folder, so i flashed uefi and i am with the win 8 bios in a win 7 machine.
It could have been ok but now my brightness is locked, i can move the cursor and use the FN buttons but nothing happens, it is locked in middle brightness i'd say.
So here are my questions:
1. Is it possible to go back to win 7 bios E16GAIMS.10F (i think it is not, but who knos...)
2. the mst important, how can i unlock the brightness???
My drivers are updated, i also tried to uninstall them and then i reinstalled but no changes...
Please guys help me (if you can of course)
Ps: sorry for my englishIt is possible to go back to the Win7 Bios....although I'm not sure how you'd go about doing it. Talk to Svet, as he is the bios master on the forums.
-
Hi, I've just purchased this laptop second hand from a friend and everything is working fine except the fan, I've seen other users on here with the same problem but I couldn't find a solution that made sense to me!!! The fan powers on ok but then starts to go up to full power then back down to almost silent, I've managed somehow, following a step by step guide, to update the bios but I cannot seem to update the EC which sounds like it might fix the problem, every time I download the file from the msi support page it says that its not compatible with 64bit versions of Windows 8?? Has anyone else managed to overcome this problem and have a step by step guide on what they did? Thanks in advance for any help as this is now becoming very annoying.
Which version are you trying to update and how you do the update?
Try to update the EC under DOS mode and don't forget to do the EC reset afterwards.
Download link: http://dl.msi.com/download_files/frm_exe/w8_16GAEMS1.506.zip
Update guide(DOS mode): http://www.msi.com/html/pdf/How_to_make_a_bootable_flash_disk_and_to_flash_EC_en.pdf
Maybe you are looking for
-
HELP How do I selectively select files and programs from TimeMachine to put back on my macbook pro? it had to be wiped out by a genius who unfortunately will not come to my house to fix - no matter how much cash I offer
-
Batch Management (ROH) - Problem
Hi, We have activated Batch Management for Raw Materials. I have done the following Configurations for PP Module. 1. Maintained Batch Mngt settings in ROH in MRP2, entry "3" 2. Strategy Type in SPRO 2. Search Procedure in OPLG 3. Maintained Search pr
-
Bug in Adobe XI: The line style of Word tables is ignored. Broken lines or dotted lines in Word tables are shown as normal uninterrupted lines in PDF file. For example, in my Word document I choose the following line styles in tables: dotted line (..
-
Itunes will not shut down on mac
My itunes will not shut down when I close it out. The itunes ball will bounce up and down and reopen itself. I am running 10.6.8 Snow Leopard and this has started in the last 3 weeks. I thought it was my blackberry software and had that removed. It
-
Acquisition tax group cannot be used this way
Dear Experts, I'm trying to generate a Journal Entry using SBO 2007 SP01 using 2 accounts. When I click on create boutton I get the following error message: DSC1 - The acquisition tax group cannot be used this way for this transaction - Message 200-4