Msi ge60 OND turbo issue

how can I activate the turbo while watching movies at VLC?? I have already checked the "use gpu accelerated decoding" in VLC, but still the turbo is not working... please help me 

Quote from: rych05 on 26-October-12, 11:46:15
uhh.. so that means using the gpu wont be necessary??
yes, dedicated GPU is not necessary when watching movies.
integrated GPU will handle this task fine
Quote
I have already checked the "use gpu accelerated decoding"
integrated GPU also have such media acceleration, so that's fine.

Similar Messages

  • MSI GE60 OND Fan Issue

    Hi, I've just purchased this laptop second hand from a friend and everything is working fine except the fan, I've seen other users on here with the same problem but I couldn't find a solution that made sense to me!!! The fan powers on ok but then starts to go up to full power then back down to almost silent, I've managed somehow, following a step by step guide, to update the bios but I cannot seem to update the EC which sounds like it might fix the problem, every time I download the file from the msi support page it says that its not compatible with 64bit versions of Windows 8?? Has anyone else managed to overcome this problem and have a step by step guide on what they did? Thanks in advance for any help as this is now becoming very annoying.

    Which version are you trying to update and how you do the update?
    Try to update the EC under DOS mode and don't forget to do the EC reset afterwards.
    Download link: http://dl.msi.com/download_files/frm_exe/w8_16GAEMS1.506.zip
    Update guide(DOS mode): http://www.msi.com/html/pdf/How_to_make_a_bootable_flash_disk_and_to_flash_EC_en.pdf

  • [GE60 OND] Strange issue with discrete graphics

    Specs:
    MSI GE60 OND
    CPU: Intel i7-3610QM
    Memory: 8gb
    discrete graphics: nvidia 660m
    OS: Windows 7 ultimate 64bit
    Was having issues with laptop, i reformatted and updated all the drivers. still did not fix.
    The issue:
    When playing games (tested on BL2, CSGO, The Forest, TF2) with the 660m it runs fine for about 5min then starts to freeze/stutter (both sound and video).  The FPS drops from around 120+ to around 20 for about 30seconds then snaps back to 120+ for another 30, then repeats.  This does not happen when using the integrated video.  Temps are staying in the 40-70c range.
    Thanks in advance!

    Quote from: Justkiller91;103962
    Yes all games are on the internal hard disk.
    Try to turn off the power saving function of the HDD.
    http://www.msi.com/faq/nb-375.html

  • Msi ge60 ond graphic drivers problem

    I installed new windows on msi ge60 ond and first intel vga driver and then nvidia driver and the nvidia driver doesnt work |Windows has stopped this device because it has reported problems. (Code 43)|.
    Have tried removing them all (Driver Fusion) and reinstalling, didn't fix my problem. Can you help me?

    You tried to install what Windows and what Windows came with the notebook?

  • MSI GE60 OND with windows 8 battery problem !!

    Hi
    next week I bought msi ge60 ond with Windows 8
    when i shut down Windows 8 on my laptop my battery will discharge in 3 days when i open it the battery Show max %5 charge is there a problem with my laptop please help thanks

    think windows 8 is the problem, which do not really shutdown and you told to shutdown,
    but put in sleep state and drain the battery
    see https://forum-en.msi.com/index.php?topic=166115.msg1217857#msg1217857

  • Bios Unlock MSI GE60 OND Request

    Hello, i have a MSI GE60 OND and i need to unlock my bios especially for those features:
    - Newest BIOS/Firmware
    - switchable graphics --> so i can turn off sometimes my nvidia card.
    - vBios                        --> so i can overclock my nvidia card (overclock limit cancel +135 MHZ...)
    - Over/undervolt and Over/underclock (with multiplier) Cpu
    - All other features that is possible :-D, but pls don`t change the Fan or something.
     I already made a Donation 2GK8061366286742R (if everything works well, i will give a second Donation ;-)
    Best regards
    My Notebook:
    Bios Version   E16AIMS.10F
    Bios Build       12/18/2012 15:20:43
    EC Version     16GAEMS1 Ver.4.04
    EC Build          04/26/2012
    i7-3630QM, Nvidia GTX 660M
    IGFX vBios Version   2126   (maybe u need this :-S)
    Memory 1 :  4096 MB
    Memory 2 :  4096 MB
    ME FW Version 8.0.2.1410
    Windows 7
    250GB Samsung 840
    p.s, I replaced my wireless card with a Atheros AR9380.

    Hello,
    Quote
    i have a MSI GE60 OND and i need to unlock my bios especially for those features:
    Quote
    - Newest BIOS/Firmware
    oki, will update it with latest intel's storage fw
    Quote
    - switchable graphics --> so i can turn off sometimes my nvidia card.
    haven't tried this personally but should works. [other people reported that works fine to turn off dedicated card]
    Quote
    - Over/undervolt and Over/underclock (with multiplier) Cpu
    cpu voltage is typically N/A
    about MP, this depend of CPU used, if you have XM chip then you can go over.
    For your i7-3630QM you can go over.
    Quote
    - All other features that is possible :-D, but pls don`t change the Fan or something.
    oki
    Quote
    - vBios                        --> so i can overclock my nvidia card (overclock limit cancel +135 MHZ...)
    oki, in add on to this also will add performance tweaks & disable boost with no throttle.
    Quote
    I already made a Donation 2GK8061366286742R
    received it.
    Quote
    (if everything works well, i will give a second Donation ;-)
    aha oks, thanks 
    will work over it and send back to you when its done.
    will take some time, normally 2-3 hours.

  • MSI GE60 VIDEO CARD ISSUE

    Hi i just bought my msi ge60 but i dont know if its normal or not my video card its running on the gtx660 not the intel 4000 when i just stand by on desktop it should run on the intelright not the nvidia ??
    the temp is on 63c its reading core 835 and shader 1671 it should lower because im not running any application????

    Quote from: flobelix on 05-November-12, 13:39:32
    Yep, already saw in FAQ
    Aha, wasn't aware that there is such FAQ
    Just checked and noted:
    http://www.msi.com/service/faq/672.html
    Q: Why is it that when I press the TURBO button the system does not overclock, instead a screen will pop up for user-defined key set-up?
    A: The scenario you encountered is normal since this model doesn’t support overclock function. Note: When the TURBO LED turns blue, it indicates that the system is under heavy loading thus system automatically switches to Nvidia dedicated graphics usage. On the other hand, when the TURBO button is pressed and user-defined key shows up, the blue light will turn off.
    So there is minor difference in what i said, its open user defined key configuration when Turbo is pressed and not 3Dmark page.
    Seems this is the minor difference between GE60 and GE70 Series.
    Noted that GE60 don't have P1 button, which seems Turbo button is assigned to this function instead.
    http://www.msi.com/service/faq/673.html
    Q: When I press the TURBO button the system will not overclock, instead I will be redirected to the 3D Mark website, is this normal?
    A: The scenario you encountered is normal since this model doesn’t support overclock function. When the TURBO LED turns blue, it indicates that the system is under heavy loading thus system automatically switches to Nvidia dedicated graphics usage. On the other hand, when the TURBO button is pressed, you will be redirected to http://www.3dmark.com wherein you can choose to engage into some GPU testing.

  • MSI GE60 OND-614SA BLACK SCREEN

    hi guys need your help/assistance/opinion and solution about my msi ge60.
    1. i always leave my laptop at home open, when i come home. it wont boot anymore.
    2. when i press power, only black screen.
    3. no indication of led's reading hard drive or something. the only led light is the power led.
    4. i already risk the warranty on my part because i open it thinking that maybe its just a memory problem or hard drive problem.
    5. but still the same.
    anyone have idea or same problem with me.
    thanks.

    Quote from: ilokaok_99 on 24-January-14, 00:54:13
    ive read already the topics that could help to solve this issue. but the problem is that their issue is not the same like me...when i open my laptop...only black screen nothing else happening...i try the ec reset...nothing happened...
    Did you try hard rebooting? Is the AC plugged in? Is the led blinking or just shinning?

  • MSI GE60 0ND - Fan Issue - Cooler Boost Button

    Hello,
    I have a problem with my MSI GE60 0ND. The fan / cooler boost button above the keyboard is always glowing and sometimes very light flickering. The fan spins at a normal and quiet level.
    When I press the button the fan starts spinning up and stays at the high level. The ligt of the button keeps glowing, but the flickering stops completly. When I press it again the fan goes back to a normal level, but the light keeps glowing.
    I recently updates the EC-Version, because I had an issue with my fan which was really annoying. Before the EC update my fan kept spinning up and down every 10-20 seconds.
    The temperatures ware always at a normal level. I own my MSI GE60 about one year. The spinning fan issue started just one month ago, but was fixed trough the update.
    Some detailed information about my notebook:
    MSI GE60 0ND
    Bios: E16GAIMS.10F (Release version)
    EC-Version: 16GAEMS1 Ver4.05
    I'm using Windows 7 x64 and tried also Windows 8.1 x64. Both have the same fan button issue.
    Installing / Uninstalling MSI SCM utility didnt make any difference.
    Regards
    Thomas

    Quote from: w33daw on 03-December-13, 18:14:26
    fan is constantly spinning with the same, average speed. It goes faster when on stress but continue to spin when system is idle
    Bios Version: E16GAIMS.10F
    EC Version: 16GAEMS1 Ver4.05
    Sorry to spoil that, but the fan was indeed always spinning before, too. But very quietly at a low rate! You could observe rotational speed in RWeverything and it did NEVER stop with that notebook (GE60) and the EC-version 14.04
    If you want to go back, check out my post here. There are the old firmware files included as well. But read the readme.txt thoroughly first!
    https://forum-en.msi.com/index.php?topic=162459.msg1251647#msg1251647
    Regards,
    jku

  • MSI GE60-2OE Fan Issue

    Hello
    So I've had mine MSI GE60 for little over a year now and recently the fan has been making 'rattling' and 'grinding' noises. I went onto the forums and search for similar topics and people said there are a  few possibilities.
    1) Fan is not balanced
    2) Dust build-up
    3) Fan bearing being used up
    Many people said to contact MSI and ask for a replacement fan if the laptop is on warranty (Mine still is, Until Feb 2016)
    However here is the problem. When I purchased the laptop I registered it straight away. Now when I go onto the MSI Register Product page it is not there. I am being asked for the serial number of the Laptop but I don't have the box. I have the proof of purchase and all the warranty documentation but dont know where to look for the Serial Number of the Laptop. It is not on the back Sticker. All it says is "GE60 2OE I77400MQ / 16GB / 1000GB / GTX765M FHD"
    Is there any other way to get the serial number of the laptop? Device Manager? BIOS? (I'm running Win 8.1)

    try removing the battery - my GE60 has a sticker, with the serial number on the battery slot which will reveal once you remove it. good luck on your RMA :D

  • Bios Unlock MSI GE60 OND Request | split

    Is it possible to get a copy of this bios?  I really need to turn off the nvidia card. 

    hello,
    what's your current bios version?

  • MSI GE60 OND bios isue

    Hello guys,
    Let put this clear, i messed up.
    I had windows 7 pre-installed and i wanted to try some Vbios modded, but i wasnt hapy with it, so i decided to go back with my stock bios... there the problems began
    The guy on the forum (a french forum, portable4gamer ) put the stock vbios from a windows 8 edition, the E16GAIMS.514 in the stock win7 folder, so i flashed uefi and i am with the win 8 bios in a win 7 machine.
    It could have been ok but now my brightness is locked, i can move the cursor and use the FN buttons but nothing happens, it is locked in middle brightness i'd say.
    So here are my questions:
    1. Is it possible to go back to win 7 bios E16GAIMS.10F (i think it is not, but who knos...)
    2. the mst important, how can i unlock the brightness???
    My drivers are updated, i also tried to uninstall them and then i reinstalled but no changes...
    Please guys help me   (if you can of course)
    Ps: sorry for my english

    It is possible to go back to the Win7 Bios....although I'm not sure how you'd go about doing it. Talk to Svet, as he is the bios master on the forums.

  • MSI GE60 E16GAIMS.514 to 10F win7

    Hi, I need to retroflash my bios to E16GAIMS.10F.
    My bios came win7 pre  installed and i messed up updating it with the win8 edition E16GAIMS.514.
    Now i can not control my brightness anymore...
    Can you help me?
    Thanks

    To Svet:
    MSI GE60 OND-203FR
    Core I7 3610Qm
    GTX 660m
    8Gb ram DDR3
    Win7 pre-installed
    Current Bios: E16GAIMS.514 (originaly it was a bios for win7, the E16GAIMS.10F)
    Current EC: 16GAEMS1 Ver4.F4
    What i want:
    The stock bios E16GAIMS.10F to make my brightness control back, and if possible, a unlocked version of the 10F where if possible i can overclock the cpu, gpu (this one is the most important, with overvoltage capability) and pass the ram to 1866mhz.
    I dont need any EC firmware because the one i have is already modded to solve the fan issue.
    Just to let you know, when i try to go back to official E16GAIMS.10F i get error: Afudos:error getting flash information, i hope the bios you will provide can be installed.
    At the time you will read this the donation will be made

  • Month Owned MSI GE60 Apache Pro Fan Issues

    Hi everyone,
    I have had my MSI GE60 Apachce Pro 15" laptop for a little over a month now.
    For the first month, I could barely hear the fans when leaving the laptop idle or using non-power hungry applications that do not involve gaming, such as browsing the web or watching videos. Now, however,  the fan seems to always be running at a medium intensity, even when idle. As soon as I boot up the laptop, the fan is much more noisy than it used to be and stays that way.
    The program HWinfo64 shows my CPU temperature at usually 41 degrees Celsius. Moreover, turning on the Cooler Blaster feature does not decrease the advertised 5-10% temperatures either. In fact, it increases the heat to around 42-43 degrees Celsius.
    My desk is usually completely dust free, so I do not think dust is the issue here. I will have to open up the back to be completely sure, but I do not want to void my warranty for something as silly as cleaning it out (There is a void sticker right above one of the necessary screws to remove the back casing. I will contact MSI to inquire about this because I read that MSI will allow owners to remove this sticker in certain locations without voiding the warranty).
    Could there be any other reason besides dust that could make my fans this noisy? Does anyone have suggestions on improving it? Thank you.

    Quote from: James D on 12-May-14, 09:11:18
    Try to remove battery and hold power button for 5 sec.
    I tried that a few times, but it did not work. The fan noise is becoming unbearable tbh. Considering selling it now :/

  • FPS / Stuttering Issues (Overheat , Speedstep Issues ? ) MSI GE60 2PE APACHE PRO

    **EDIT**
    Unable to post direct image links , please ad HTTP:// before links
    Good evening Fellow Gamers and Adepts.
    I come to you tonight with a serious doubt , which has rattled me for a while , and after some intense troubleshooting i have came up blank.
    Here's the deal , as stated , i have a MSI GE60 2PE apache Pro
    Now , playing cs go has been the bane of my existence, i am aware there are heating issues with this laptop , but those have been fixed by a Thermal repaste, a cooling pad and the backplate removed.
    Now i have no more throttling of CPU , and GPU appears to handle fine aswell; the thing is i keep having MASSIVE lag spikes in CS:GO , and apparently they are being cause by CPU issues.
    Image for clarification .
    (Standart situation , notice the relative low fps for a old game)
    imgur.com/cJ2Ly80
    After a few seconds the following occurs
    imgur.com/cJ2Ly80,27y1P5C,aq30R4r#1
    Notice the fps drop and the CPU frequency percent alert in game
    another shot of this in console so you can see the several occurrences
    imgur.com/cJ2Ly80,27y1P5C,aq30R4r#2
    now keep in mind that these are the lowest game settings, in Fullscreen windowed mode , if i even CONSIDER putting it on standart fullscreen i get unplayable jitterness and fps that range from 10 to 80 , all in a second.
    Now , as i have stated i have fooled around and disabled speedstep in the bios , meaning that the cpu is always at 100%, seeing i have removed the backplate , throttling is not an issue as IXT (Intel extreme tuning) can attest.
    note aswell the "active core count" spikes to 4/3 in the exact moments of the stutters, meaning that both problems should , in theory , be connected .
    Image for reference:
    gyazo.com/e1257716681828d38213bcc0e5fa71bc
    Details of IXT
    gyazo.com/1f03a344b9ac2642b1a885ee0a8ea078
    can ANYONE give me an ideia of whats going on ? i rather enjoy playing with games with friends , but this is driving me up the wall..
    Lastest NVIDIA / Laptop drivers installed ; Bios Updated and EC firmware aswell.
    Thank you for your time guys x)

Maybe you are looking for

  • Computer does not put itself to sleep when used in lid-closed mode

    Hi. I'm having a small problem when using my macbook pro with the LED display, lid closed and with external keyboard and mouse. If I leave the computer unattended, the display goes to sleep at the time specified in system settings under energy saver.

  • LMS 4.2 User Defined Groups Empty after Daemon restart

    Hello I need some help here. In order to get topology services to run on a non resolvable DNS server I have followed the instructions in the online help and got Topology Services to start. My issue now is that all my userdefined groups are empty and

  • Were Can I SAFELY download my missing QTMovie.dll file from?

    The Itunes store keeps crashing and when I try the fix suggested by Apple I find that the file that needs moving - the QTMovie.dll file is not there so I need to install it if possible from a safe site. Any Ideas PLEASE!

  • Dialog.show () does not return

    the documentation for java.awt.Dialog.show () says "If the dialog is modal and is not already visible, this call will not return until the dialog is hidden by calling hide or dispose.", but I was wondering why it does that and if theres any way to ge

  • How to insert APPEND hint.

    Is there a way to do /*+ APPEND */ hint in the insert statement in the OWB mapping? How do I do it?